You are on page 1of 1

1. Pour a small amount of hot water in the sliced chili and get the extract by using spoon.

2. After getting the extract, put it in the container where the pepper is placed.

3. Pour 3 spoons of alcohol into the mixture and mix them all in a container.

4. Put the pepperspray in a small bottle with spray.

5. Get the taser, pepperspray, rubber and the glue gun.

6. Stick together the pepperpray and the taser using a glue gun. The pepperspray is place

at the end of the taser so the pepperspray is at the end and the taser is at the upper

part.

7. After sticking them together, cover the outer surface with rubber using glue gun.

8. Make sure that you can spray easily the pepperspray and the button of the taser can

be reached out even if it has a rubber exterior.

You might also like