Professional Documents
Culture Documents
ATTAR UT2 Course Enrolment Form
ATTAR UT2 Course Enrolment Form
_________________________________________________________________________
COURSE DETAILS
Sector Venue Total Course Fees
Course i.e. Welds or i.e. Melbourne or Dates Payable
Corrosion Perth
Ultrasonics Level 2
TAF053.3 ATTAR UT2 Course Enrolment Form Uncontrolled When Printed Page 1 of 5
Ultrasonics Level 2 (UT2) Course Enrolment Form
_________________________________________________________________________
Ultrasonics Level 1
Materials Technology (or a knowledge of materials processes)
Math – Algebra & Trigonometry. Pre-requisite worksheets can be located at www.attar.com.au or contact
ATTAR if you require them to be sent by hard copy.
3 months experience (recommended) - The training hours nominated by ISO9712 are based on
candidates having sufficient industrial experience and maths skills prior to course commencement.
Additional training may be required where candiates do not meet this requirement.
Ultrasonics Level 2:
The total of my current industrial experience in ultrasonics is approximately hours.
I understand that this course requires maths knowledge including algebra & trigonometry.
I understand that this course has a prerequisite of Ultrasonics Level 1 and I have provided evidence
of my 40 hours of UT1 training.
I understand the ISO9712 examinations for this course will be difficult to successfully complete if I do
not have the recommended industrial experience in ultrasonics prior to attending training for Level 2
Ultrasonics.
I understand the minimum ultrasonics experience recommended for candidates attending Level 2
training in Ultrasonics is 432 hours (3 x months experience with 36 hours per week).
I understand that on the commencement of the course I will be examined on my basic maths and
Ultrasonics Level 1 knowledge to confirm suitability to attend the course, and may be removed from
the course if my knowledge is deemed inadequate.
Equipment:
ATTAR is able to supply all equipment requirements for the above courses; however some students prefer to
be trained and assessed on their own equipment. Please indicate below if you would prefer to bring your own
equipment.
I will supply the following equipment: (Please tick the appropriate Box)
Probes & Leads 2-4 MHz 45°,60°,70° & 4-5 MHz Zero Degree
TAF053.3 ATTAR UT2 Course Enrolment Form Uncontrolled When Printed Page 2 of 5
Ultrasonics Level 2 (UT2) Course Enrolment Form
_________________________________________________________________________
PAYMENT DETAILS
Payment of Fees by: (please tick) Company Student
I wish to pay my course fees of $ _________
Company Purchase Order – Only applicable if you are an approved Purchaser. A copy of the Company
Purchase Order for the full course fee must be supplied with this Enrolment Form.
Please forward enrolment and/or notification of payment to Email: training@attar.com.au or Fax: 03 9574 6133
Card Exp
/
Number Date
Privacy Statement (Summary): ATTAR recognises that the privacy of customer personal information is paramount.
ATTAR manages your personal information in accordance with the National Privacy Principles relevant to our business.
A copy of the full Privacy Policy can be downloaded in the download section of www.attar.com.au or by contacting the
Technical Director NDT.
Before submitting this Course Enrolment Form to ATTAR, please check the following:
I have signed and dated each page of this Student Enrolment Form
I have completed the payment details required
My Name and Date of Birth are clearly legible
I have provided evidence of my 40 hours of UT1 training
I have completed the Pre-Course Assessment on pages 4 & 5
Enrolments cannot be accepted unless all pages have been completed and full payment supplied.
Please forward your completed Enrolment form to – training@attar.com.au or fax 03 9574 6133
TAF053.3 ATTAR UT2 Course Enrolment Form Uncontrolled When Printed Page 3 of 5
Ultrasonics Level 2 (UT2) Course Enrolment Form
_________________________________________________________________________
Declaration:
I __________________________ (candidate name), declare that the following answers are my own
work and were completed without external assistance.
Using the following words answer the questions below: Increase, Decrease, No Change
1) __________ Wavelength
2) __________ Velocity
4) __________ Sensitivity
5) __________ Penetration
6) __________ Resolution
8) __________ Attenuation
TAF053.3 ATTAR UT2 Course Enrolment Form Uncontrolled When Printed Page 4 of 5
Ultrasonics Level 2 (UT2) Course Enrolment Form
_________________________________________________________________________
16) For the following probe details calculate and show all working:
5MHz, 12mm diameter, zero degree
17) For the following probe details calculate and show all working:
2MHz, 24mm diameter, zero degree
18) If the incident angle from a probe was 20º (perspex), what would be the refracted angle of
the compression wave in steel? (Show all working)
19) If the incident angle from a probe was 29º (perspex), what would be the refracted angle of
the shear wave in steel? (Show all working)
20) Calculate the 1st and 2nd critical angles for a perspex/steel interface. (Show all working)
TAF053.3 ATTAR UT2 Course Enrolment Form Uncontrolled When Printed Page 5 of 5