Professional Documents
Culture Documents
Monolithic Linear IC
LA2902V
Four-Channel High-Output Line Amplifier
for Car Audio Systems
5.6
7.6
The LA2902V also significantly reduces the required
0.5
mounting area by cutting in half the number of external 1
0.15
capacitors required for boosting the signal-system supply (0.33) 0.65 0.22
1.5max
(1.3)
voltage and is available in SSOP miniature package.
0.1
• High output level (5.3 Vrms) SANYO: SSOP24 (275 mil)
• Low output noise voltage (17 µV)
• Low total harmonic distortion (0.004%)
• High ripple rejection ratio (65 dB)
• Fewer external parts required
• Excellent audio fidelity
Specifications
Maximum Ratings at Ta = 25°C
Parameter Symbol Conditions Ratings Unit
Maximum supply voltage VCC max With no input signal 13 V
Ta ≤ 85°C, Mounted on a printed circuit board
Allowable power dissipation Pd max 400 mW
(114.3 × 76.1 × 1.6 mm3, glass epoxy)
Operating temperature Topr –40 to +85 °C
Storage temperature Tstg –40 to +150 °C
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
Pin Assignment
LIFT R OUT
LIFT L OUT
LIFT R VD
LIFT L VD
RR OUT
RF OUT
LR OUT
LF OUT
R GND
VCC R
L GND
VCC L
24 23 22 21 20 19 18 17 16 15 14 13
LA2902V
Top view
1 2 3 4 5 6 7 8 9 10 11 12
LF IN--
LF IN+
N.C
LR IN--
LR IN+
DC L
DC R
RF IN+
RF IN--
N.C
RR IN+
RR IN--
ILA00938
No. 7140-2/5
LA2902V
12kΩ 36kΩ
12kΩ 36kΩ
-- SIGNAL 22µF
1 LF-OUT
LF-IN AMP +
24
+ 2 +
10kΩ
22µF
-- VCC
3 VREF +
30kΩ
SIGNAL 22µF
4 --
AMP + LR-OUT
LR-IN 23
+ 5 +
10kΩ
22µF
-- VCC 22
VREF +
30kΩ
21
+
100µF
LIFT
X +
AMP
20
--
--
1.5NF
DC-L VREF +
6 7.5kΩ 36kΩ
Ripple
Filter 19 VCC
+ 9.0V
10µF
+ 18
47µF
7.5kΩ 36kΩ
1.5NF
7 VREF +
DC-R --
--
17
+
100µF
X LIFT
AMP +
16
VREF + 30kΩ
VCC
-- 15
RF-IN
+ 8 + 22µF
+ RF-OUT
22µF 14
9 -- SIGNAL
10kΩ
AMP
10 VREF + 30kΩ
VCC
--
RR-IN
+ 11 + 22µF
+ RR-OUT
22µF 13
12 -- SIGNAL
10kΩ
AMP
36kΩ
36kΩ
12kΩ
12kΩ
ILA00937
Note: We recommend using resistors with tolerances of 1% or better for the 12 kΩ and 36 kΩ feedback resistors.
No. 7140-3/5
LA2902V
20 20
10 10
VN 4
5 5
3
0 0 2
2 4 6 8 10 12 14 6 7 8 9 10 11 12
Supply voltage, VCC — V ILA00939 Supply voltage, VCC — V ILA00940
THD -- VO f Response -- f
1.0 2
7 VCC=9V VCC=9V
Total harmonic distortion, THD — %
5 RL=10kΩ RL=10kΩ
3 Rg=600Ω VO=0dBm
2 L.P.F=80kHz 1 Rg=600Ω
0.1
7 Response — dB
5
3 0
2 10kHz
0.01
7
5 --1
1kHz
3
2
100Hz
0.001 --2
0 1 2 3 4 5 6 10 2 3 5 7 100 2 3 5 7 1k 2 3 5 7 10k 2 3 5 7100k
Output voltage, VO — Vrms ILA00941 Input frequency, f — Hz ILA00942
VNO -- VCC VNO -- Rg
40 40
Rg=0 VCC=9V
Output noise voltage, VNO — µVrms
RL=10kΩ
Output noise voltage, VNO — µVrms
RL=10kΩ
DIN AUDIO DIN AUDIO
30 30
20 20
10 10
0 0
6 7 8 9 10 11 12 10 2 3 5 7 100 2 3 5 7 1k 2 3 5 7 10k 2 3 5 7100k
Supply voltage, VCC — V ILA00943 Input resistance, Rg — Ω ILA00944
SVRR -- VCCR SVRR -- fr
--20 --20
VCC=9V VCC=9V
RL=10kΩ RL=10kΩ
Ripple rejection ratio, SVRR — dB
fr=1kHz VCCR=100mVrms
--40 Rg=0 --40 Rg=0
DIN AUDIO DIN AUDIO
--60 --60
--80 --80
--100 --100
0 200 400 600 800 1000 10 2 3 5 7 100 2 3 5 7 1k 2 3 5 7 10k 2
Power supply ripple voltage, VCCR — mVrms ILA00945 Ripple frequency, fr — Hz ILA00946
No. 7140-4/5
LA2902V
CH Sep -- f CH Sep -- f
--20 --20
VCC=9V VCC=9V
RL=10kΩ RL=10kΩ
Channel separation, CH sep — dB
--60 --60
LF LR
Rch Rch
--80 --80
--100 --100
10 2 3 5 7 100 2 3 5 7 1k 2 3 5 7 10k 2 3 5 7100k 10 2 3 5 7 100 2 3 5 7 1k 2 3 5 7 10k 2 3 5 7100k
Input frequency, f — Hz ILA00947 Input frequency, f — Hz ILA00948
CH Sep -- f CH Sep -- f
--20 --20
VCC=9V VCC=9V
RL=10kΩ RL=10kΩ
Channel separation, CH sep — dB
--60 --60
RF RR
Lch Lch
--80 --80
--100 --100
10 2 3 5 7 100 2 3 5 7 1k 2 3 5 7 10k 2 3 5 7100k 10 2 3 5 7 100 2 3 5 7 1k 2 3 5 7 10k 2 3 5 7100k
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products (including technical data, services) described or contained
herein are controlled under any of applicable local export control laws and regulations, such products must
not be exported without obtaining the export license from the authorities concerned in accordance with the
above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of October, 2001. Specifications and information herein are subject
to change without notice.
PS No. 7140-5/5