Professional Documents
Culture Documents
Innova IR Sensor With Analog Output
Innova IR Sensor With Analog Output
Specification
Infrared temperature transmitter Metallurgy, petrochemical industry, power industry,light industry,
textile industry, food industry, national defense industry sector
and scientific research etc.
3. Main features: 10
AC 85V - 264V
1
5.Instructions: 11
12
2
4 DC24V+
---High precision signal wire + red 、laser wire +blue
13
14
5
DC24V -
---High optical resolution ratio 15
6
+
4 - 20mA
7
16
18 9 -
---Large temperature range: -50℃~1800℃
1.Alternating voltage 85-264V contact to theconnection
---Output:4- 20MA
10-11.
---Target size: no less than 16mm 2.Signal wire red wire contact to the connection 4
(DC24V+).
D:S=16:1
3.Signal wire black wire contact to the connection 6.
OUTPOUT≤1mW WAVELENGTH 630~670nm
Red signal wire + pole 4.Connection 5(DC24V-) contact to connection 9.
50mm
22.5mm
black signal wire – pole Connected with the short circuit,please see the picture.
5.Use 9V battery power to contact laser toopen laser
360mm
and use laser to target before fix and install.
700mm !
1
LASER RADIATION DO NOT STARE IN TO BEAM AC 85V-264 12 DC24-
CAUTION CLASS II LASER PRODUCT 1.Alternating voltage 85-264V contact 2
to the connection1-2. 13
3
2.Signal wire red wire contact to the 14 DC24V+
D:S=50:1 connection 14 (DC24V+). 4
OUTPOUT≤1mW WAVELENGTH 630~670nm 3.Signal wire black wire contact to the 15
36mm connection 6. 5
16mm 16
4.Connection 8 contact to connection 6
+
12 to make short circuit, please see 17
800mm the picture. 7
4-20mA
5.Use 9V battery power to contact laser 18
1.5m ! to open laser and use laser to target - 8
before fix and install. 19
LASER RADIATION DO NOT STARE IN TO BEAM
CAUTION CLASS II LASER PRODUCT
9
20