Professional Documents
Culture Documents
User Manual
Version 1.0.1
Table of Contents
1 Product Profile ..................................................................................................................................................... 3
1.1 Product overview ........................................................................................................................................... 3
1.2 Main function of product ...................................................................................................................... 3
2 Software Installation ............................................................................................................................................ 4
2.1 Get cMOB-20 Software .................................................................................................................................. 4
3 Software operating instructions .......................................................................................................................... 5
3.1 Login interface ............................................................................................................................................... 5
3.1.1 Sign Up ................................................................................................................................................ 6
Android version cMOB-20 is video surveillance software of mobile client which is developed for our monitoring
devices. Support android 4.1 or higher version. The user manual will mainly introduce how to set and use our
cMOB-20 APP.
Main function:
Support watch the real time video via Wi-Fi and GPRS;
Users can get our software by searching “cMOB-20” in Android Play Store and then download it.
To download the App from Play Store, please input “cMOB-20” in the search interface, then click “download” to
download it to your phone after you search it. Once installed, the software will show on your phone.
Figure 2.1a
3 Software operating instructions
Once installed, click the cMOB-20 icon to run the software. Start the software to enter the login interface,
then you can click either on “Local” or on “InstaOn Cloud” as shown in figure 3.1a.
Figure 3.1a
3.1.1 Sign Up
To register a new user click on “New user, sign up here” then enter valid username, password, confirm password
email address and verification code and also select Term of use. After that click “Sign Up” to finish user register. As
shown in figure 3.1b.
Figure 3.1b
3.1.2 Forget Password
To reset the password click on “Forgot Password?” Here, enter Email ID and click on Get code. Now check your
email id for verification code. Put the verification code in code box and click on Verify Code button.
Now enter new password and confirm password and click on save button. As shown in figure 3.1c.
Figure 3.1c
After Cloud login or Local Login we need to click on + icon to add the devices through InstaOn cloud ID, IP/Domain
or Local Wi-Fi search
3.2 Device List
Figure 3.1d
3.2.1 InstaOn Cloud
It shows as figure 3.1e after login, click the “+” button in the top right corner of “Device List” interface to enter the
“InstaOn Cloud” interface, here we need to put Device Name, InstaOn cloud ID, user name and password after
that select the live preview main or extra and click on OK button.
Figure 3.1e
InstaOn Cloud ID: User can input the InstaOn Cloud ID (User can get it from Main Menu Network
InstaOn Cloud option to scan the QR code to get InstaOn Cloud ID.
Password: The password of device, match with the username of device, default is admin.
Live Preview: You can select Main or Extra Stream; by default extra stream is selected.
After fill in these settings, click “OK” button. Then it will back to the “Device List” interface, you can see
the device which you added in the device list.
3.2.1 IP/Domain:
Click on IP/Domain option to add the device with IP address or Domain name, as shown in figure 3.1f.
IP/Domain: User can input the IP address or domain name of the device. User can get the IP address from
Main Menu Network TCP/IP option and for Domain name Main Menu Network DDNS.
Password: The password of device, match with the username of device, default is admin.
TCP Port: User can put the TCP Port of the device. By default TCP is 25001.
Live Preview: You can select Main or Extra Stream, by default extra stream is selected
After fill in these settings, click “OK” button. Then it will back to the “Device List” interface, you can see the
device which you added in the device list.
Figure 3.1f
3.2.3 Wi-Fi Local Search:
Click the “Wi-Fi Local Search” option to add the local network devices from the Wi-Fi configuration interface.
Select the searched device and click on the add button after that the device will be added, as shown in figure 3.1h
and 3.1i.
After adding the device click and select edit option to change the password of the admin account with
the password which you have saved for the admin account of the device.
You can also click on to Delete, Copy serial code, Share to friend, Edit, cancel operation, follows 3.1f
Figure 3.1f
Local login:On user login interface (3.1a), neither need to input user ID nor password, directly click [local login]
button to get into device list. Refer to operation when user login device to add or delete device.
Mobile connect to Wi-Fi of device, go to Client, then click directly connect to device, get into live video interface,
press back button to device list interface, as 3.1i shows.
3.3 Live Preview
Choose device cameras on the device list interface and click on Start Live Preview at the bottom of page, get into
Live Video interface as 3.2a, 3.2b shows:
Sign Function
close channel
audio
menu
snapshot
record
Two-Way Talk
HD/SD switch
fresh
remote playback
PTZ control
zoom in/out
focus
Iris
3.4 Playback
Mobile application is able to visit device remotely, collect video from hardware storage, to get playback. Click time
on the right above corner to start searching, as 3.3a shows:
Figure 3.3a
To play/pause video, audio, snapshot or record.
Make sure there is video in order to search, if not, it will not work.
3.5 Two-Way Talk
To do two-way talk through the selected device, click “ ”, it will show tip “ ”, keep pressing on when
you are speaking. The voice can be heard through Client from device to achieve communication between client
and device.
Click , to get into the page 3.5a,is able to encode config, video config, alarm config, memory config,
Figure 3.5a
1. Encode Config:
select “Encode Config”, pop up the window like 3.5b, is able to modify resolution, Frame Rate, Definition, Audio,
Video parameter
Figure 3.5b
2. Record Config:
select “Record Config”, pop up window like 3.5c, is able to modify length of video, pre-record time.
Figure 3.5c
3. Alarm config:
Select “alarm config”, pop up window like 3.5d, when event is triggered then mobile application will receive alarm
message.
4. Remote Playback:
Reference 3.4
5. Storage Config:
Mentions total capacity and residual capacity, if you enable HDD full (overwrite) option the HDD of DVR will get
overwrite, follows 3.5f.
Figure 3.5f
6. Change Password:
select “change password”, will get below interface (Figure 3.5g), here you can change the device
password.
Figure 3.5g
7. Download
By file: Select by file: click the button to start download, then this button will show the progress
Figure 3.5h
Figure 3.5j
3.7 Main Menu
Click the button in the live view page to enter the main menu interface.
InstaOn Cloud login: there are Device List / Local Record / Local Album / Alarm Push / Local settings available in
the main menu. See the Figure 3.6a.
Figure 3.6a
Local login: there are Device List / Local Record / Local Album / Local settings available in the main menu. See the
Figure 3.6b.
Figure 3.6b
Click icon to enter the main menu, then click local record, you will get below page , as the Figure 3.6d;
Click the record to play the record.
Figure 3.6c
Delete:
Touch“ ” button on the top right, then click the video which u want to delete, as the Figure 3.6d, touch
Note:
Make sure there are recorded in the local record, then you can search out the record, otherwise the local record
will be empty.
Figure 3.6e
Stay Signed in: Switch it on, app will login current account automatically, display
Stream Type: Switch it on, stream type change to high definition (main stream)
Automatic highlight: Switch it on, APP will adjust the backlight automatic when enter live preview mode
Language: Language switch
Clean Cache: Touch it to clean cache.
After u switched the phone language, the CMOB-20APP language will be changed simultaneous. For example,
when your phone system language is English, the APP language will be English as well.
Thank You for Choosing CP Plus!