Professional Documents
Culture Documents
CREO电器系统设计 Creo Electrical Design: Trainer
CREO电器系统设计 Creo Electrical Design: Trainer
广西柳工机械股份有限公司
研究总院-IT部
TRAINER:陈杰(CHEN JIE)
E-mail:chenjie@liugong.com
目录(Directory)
1、Creo电器系统设计流程
Creo electrical system design process
2、Creo Schematics电器原理图设计
Creo electrical schematic design
3、Creo三维布线设计
3D cabling design
4、Creo线束展平图设计
Creo harness flatten figure design
5、Creo线束展平工程图设计
Creo harness flatten drawings design
1. Creo电器系统设计流程
Creo electrical system design process
1.基本设计流程
Basic Design Process
Creo Schematics design
XML
Creo/CABLING
Creo/HARNESS-MFG
Creo drawings
Creo electrical system design --Advantage
1.准确无误,效率高;
Accuracy, high efficiency;
2.相关性好,真实性强;
Correlation good, Strong authenticity;
3.各种线缆信息获取快速,准确;
Cable access to information quickly and accurately;
4.操作简单方便;
Easy to operate;
5.原理图可直接驱动布线,准确且效率高;
The Schematics can drive cabling directly, accurate and
high efficiency ;
2. Creo Schematics Design
1.基本设计流程
Basic Design Process
XML
Creo/CABLING
Creo/HARNESS-MFG
Creo drawings
Creo Schematics—Interface(界面)
Creo Schematics—Design Explorer
Creo Schematics--Catalog Explorer
Creo Schematics--Blocks(块)
Blocks:各种元件图形,可以带有针脚也可以不带针脚
Various graphs of components, equipping with or without pins will be ok.
Type:COMPONENT
Creo Schematics--Ports(针脚)
SPLICE PIN
Creo Schematics--Ports(针脚)
Type:PORT
Creo Schematics--Groups(组)
Groups 主要是带有接线信息的各种接插件、端子、焊点以及直接接线的元件图形等等
Groups are formed by a variety of connector with wiring information , terminals, welding
spot and direct wiring components graphics, etc.
Parametric Connectors
Port
Splice
Creo Schematics--Groups(组)
1.基本概念介绍
Creo Schematics--Fibers(线缆)
Fibers are defined only by the following
eleven parameters :
color
obj_type
spool_name
thickness
units
wire_gauge
min_bend_radius
full_name
name_format
layer
sheets
Type:
CONNECTION!WIRE!WIRING_WIRE
Creo Schematics--Highway(高速路)
Highway
Creo Schematics--Highway(高速路)
THE SAME
Creo Schematics--Design Template
接插件可以旋转、镜像;
The connector can rotate, mirror;
可以调整针脚间距、更改针脚号;
You can adjust the pin spacing , and change the pin number ;
Creo Schematics--Wiring(布线)
1.基本设计流程
Basic Design Process
Creo Schematics design
XML
Creo/CABLING
Creo/HARNESS-MFG
Creo drawings
Creo cabling--装配元件
Assembly Components
The parametric connector can be used to generate different connectors.
Creo cabling--创建线束
Create Harness
Creo cabling--设计布线网络
Cabling Network Design
Use the “route network” to finish cabling network design
Creo cabling--插入焊点
Insert Splice
Use the “Insert Component” to finish insert splice.
Creo cabling--导入XML文件
Import the XML file
Use the “Import” to finish import the XML file
Creo cabling--指定元件
Designate Components
The single component can be done quickly by automatically specify automatic matching ;
But several same components need manually match;
Creo cabling--创建导线
Creating Wires
Use the “route cables” to finish create wire.
All wires can be quickly generated.
Creo cabling--创建束
Creating Bundle
Use the “bundle” to finish creating wire.
All wires will quickly generate.
Creo cabling--创建捆扎标记
Creating Strapping mark
Use the “marker” to finish strapping mark.
3.Creo harness flatten figure design(线束展平设计)
1.基本设计流程
Basic Design Process
Creo Schematics design
XML
Creo/CABLING
Creo/HARNESS-MFG
Creo drawings
Creo harness flatten figure design
Create manufacture components(创建制造组件)
Creo harness flatten figure design
Flattened harness(展平线束)
Creo harness flatten figure design
Create manufacture components(创建制造组件)
4.Creo harness flatten drawings design(线束展平工程图设计)
1.基本设计流程
Basic Design Process
Creo Schematics design
XML
Creo/CABLING
Creo/HARNESS-MFG
Creo drawings
4.Creo harness flatten drawings design
Creating a Drawing(创建工程图)
Creo harness flatten figure design
Insert the projection(插入投影)
Creo harness flatten figure design
Display Connector Description(显示接插件描述)
Creo harness flatten figure design
Insert wiring table(插入接线表格)
Creo harness flatten figure design
Insert wiring table(插入接线表格)
com_pin_table_EN.tbl
3 tables:
spool_length_EN.tbl wire_from_to_table_EN.tbl
Creo harness flatten figure design
Dimensioning (标注尺寸)
Creo harness flatten figure design
Completion of the design(完成设计)
谢谢!
THANK YOU!