Professional Documents
Culture Documents
New PDF 25
New PDF 25
Q3. How does the ignition system of a gas turbine engine differ from that of a reciprocating engine?.
A. Magneto to engine timing is not critical.
B. One igniter plug is used in each combustion chamber.
C. A high energy spark is required for ignition.
Q4. Igniter plugs used in turbine engines are subjected to high intensity spark discharges and yet they
have a long service life because they.
A. operate at much lower temperatures.
B. are not placed directly into the combustion chamber
C. do not require continuous operation.
Q15.Which type thermocouples are utilized in the pure jet engines where the gas velocities are high?
A.Stagnation Type
B. Rapid Response
Q16. Due to this directly passing of gases over the hot region, there is a____ is created
A. Surface Contact
B. stagnation
C. rapid response
Q21 Engine oil temperature gauges indicate the temperature of the oil.
A. entering the oil cooler.
B. entering the engine.
C. in the oil storage tank.
Q22. In combustion system, 2 igniters plugs being situated in ........... Position.
A. Same
B. Different
C. Both
Q24 In ignition system, A high value output is necessary yo ensure that ....…
A. Engine will obtain a satisfactory relight at high altitude
B. Sometime necessary for starting
C. Both
Q25. Under certain flight condition , such as icing or takeoff in heavy rain or snow it may be necessary to
have ignition system ............
A. Continuously operating to give an automatic relight should flame extinction occur
B. As in A and also it refer low value output
C. As in B because it result in longer life of the igniter plug and ignition unit
D. All