THREAD PITCH CHART
COARSE THREAD SERIES
Thread series cover designations of diameter/pitch combinations that
sred by the number of threads per inch (TP!) applied to a
single diameter.
Coarse Thread Series (UNC/UNRC) is the most common designation
for general application bolts and nuts. Coar
because they are less likely to cross thread, more tolerant in adverse
thread is beneficial,
& conditions and facitata quick assembly \
>| Nominal Size & Basic Pitch Section at Minor | Tensile Stress
( Threads Per Inch | Diameter (Inches) jameter (In?) Area (In?)
vi %-16 0.9944 0.0678 00775 >
Sai Thg- 14 0.3911 0.0933 0.1063
= Vy 13 0.4500 0.1257 0.1419 3
y Met soe ose 0382
1 0.5660 0.202 0.226
es %-10 0.6860 0.02 0.988
: : %-9 0.8028 0419 0.462,
1-8 ote 05st 0.606
1%-7 1.0322 0.693 0.763
14-7 1.4572 0.890 0.969
1%-6 1.2667 1.054 1.155,
“ae 1%-6 1.3017 1.204 1.405 2
eee 1% -5 1.6201 1.74 1.90
ee 2-4% 1.8557, 230 250
4 2%4- 4% 2.1057 3.02 3.25
2-4 2.3376 372 4.00
24-4 25876 462 493
an 20976 562 597
3-4 3.0876 672 7.10
Bp-4 3.3376 7.92 833
3% -4 3.5876 921 9.66
a4 3.8376 1061 11.08,
MUDGE avy exo
i GALESOMUDGEFASTENERG.COM
FASTENERS, INC. WWWMUDGEFASTENERS.COM