Professional Documents
Culture Documents
FR-D700
Ambient temperature 50 °C
H
FR-D720S-025-EC 2.5 0.4 68 x 128 x 142.5
200 V Type
FR-D720S-042-EC 4.2 0.75 68 x 128 x 162.5 Frequency Inverters
FR-D720S-070-EC 7.0 1.5 108 x 128 x 155.5
FR-D720S-0100-EC 10.0 2.2 140 x 150 x 155.5
FR-D740-012-EC 1.2 0.4 108 x 128 x 129.5
FR-D740-022-EC 2.2 0.75 108 x 128 x 129.5 W W D
standard inverter
To protect both staff and valuable machin- 쐽 Sensorless vector control
FR-D700 can be mounted directly side by
ery, the FR-D700 has innovative functions
side. A line within the FR-D700 series allows The sensorless vector control of the
that enable it to respond with great sensi-
effective, space-saving heat dissipation FR-D700 also makes it possible to achieve
tivity to a variety of external factors.
through an approx. 1 cm thick cooling plate exceptional speed and torque performance
(“flat plate”, up to 3.7 kW). even without a motor with sensor. This
쐽 Controlled deceleration during brief
saves additional hardware costs.
Simple operation 쐽 Simple network connection power failures
The frequency inverter can respond to
The standard configuration of the FR-D700 쐽 Independent motor setting
쐽 Simple cabling has a serial interface (RS485) which allows power failures using regenerative energy to
The independent motor setting is based on
communication with a PC and a PLC. perform controlled deceleration of the
The integrated spring clamps to connect the Autotuning function that can read out
Modbus RTU also is supported. motor. This prevents uncontrolled run-
control and power lines quickly ensure reli- all the parameters needed for the motor
down and damage, for example, to textile
able and simple cabling. model in less than a minute even when it is
Compliance to international standards such machines.
not running.
쐽 Easy parameterization as CE, UL, cUL, GOST, RoHS guarantees
쐽 Automatic restart after power
With the help of the parameterization soft- worldwide use. 쐽 High overload capacity of 200 %
failures
ware FR-Configurator a series of easy func- The maximum short-term overload capac-
쐽 Short service times In pump and fan applications you can con-
tions such as graphical machine analysis to ity of 200 % for 0.5 s minimizes downtimes
The fans are designed as compact units that figure the inverter to resume power after
optimize the drive system are available. caused by overload alarms.
can be replaced in less than 10 seconds for brief power failures. The system then
catches the coasting motor and automati- 쐽 Integrated brake chopper
쐽 Integrated control unit cleaning or in the event of failure.
cally accelerates it back to the preset speed.
The integrated Digital Dial gives the user The built-in brake transistor of the FR-D700
direct access to all important parameters 쐽 Integrated emergency stop supports direct connection of an external
much more quickly than would be possible function* braking resistor to improve stopping
with normal keys. power.
The FR-D700 series has an emergency stop
In addition to entering and displaying vari- input for safe shutdown. This ensures safe
ous parameters, the integrated four-digit operation in compliance with the European
Machinery Directive without installation of a
Additional energy
LED display also monitors and displays cur-
Door and gate drives are only some of the multiple applications of the new FR-D700 series. rent operating values and alarm messages. second protection mechanism. The FR-D700
thus conforms to the ISO13849-1 (EN954-1)
savings
cat. 3 and IEC60204-1 cat. 0 standards. The FR-D700’s OEC function helps to further
Removable comb-like cable
* available from summer 2008
optimize current and hence power con-
Entry into the drive bushing
sumption of the motor. The result is an
additional decrease in energy requirement
universe Cabling and fan replacement made easy compared to a conventional inverter.
Simple and safe operability, compact design 쐽 Failure safety with self-diagnostics
as well as improved performance features This inverter actively monitors its own func- Long service life
were the focus during the development of tional safety. If, for example, the fan rpm
the new FR-D700 frequency inverter. A drive decreases to 50 %, a pre-alarm is triggered. The FR-D700 is designed for a service life of
was created that set new standards in the An internal measuring program monitors over 10 years. This is made possible, among
field of compact drives. the ageing of the capacitors and an operat- other things, by high-performance heat-
ing hours counter enables the operator to resistant capacitors, cooling fans with sealed
Improved functions and device properties bearings and special lubricating grease. The
plan the best time for servicing. Protection
such as simplified cabling thanks to spring flow of cooling air comes into contact only
Conveyor belts and chain conveyors are an ideal appli- and overload functions like the phase fail- Only one protection mechanism is needed.
cation for the FR-D700. clamps, the integrated Digital Dial with LED with the heat sinks and not electronic com-
ure monitoring system for both the input
display, improved performance yield in the ponents. This ensures that no dust or dirt
and output circuits ensure trouble-free
low-speed range as well as the integrated The built-in multi-user panel with Digital Dial can collect on the components. The circuit
operation.
emergency stop function make the FR-D700 boards are protected against aggressive
the new standard in the ultra compact class. environments with single or double layer
conformal coating – another feature that
The FR-D700 is especially advantageous for ensures longer service life.
standard applications by virtue of its user-
friendliness. It is the correct choice in both
simple and more sophisticated applications.
Typical applications are feeder and con-
veyor drives, machining tools or gate and
door drives.
The ultra compact Flexible concept
쐽 Compact installation
Due to the ultra-compact dimensions the
Upgraded functional
scope
More standard
functions
standard inverter
To protect both staff and valuable machin- 쐽 Sensorless vector control
FR-D700 can be mounted directly side by
ery, the FR-D700 has innovative functions
side. A line within the FR-D700 series allows The sensorless vector control of the
that enable it to respond with great sensi-
effective, space-saving heat dissipation FR-D700 also makes it possible to achieve
tivity to a variety of external factors.
through an approx. 1 cm thick cooling plate exceptional speed and torque performance
(“flat plate”, up to 3.7 kW). even without a motor with sensor. This
쐽 Controlled deceleration during brief
saves additional hardware costs.
Simple operation 쐽 Simple network connection power failures
The frequency inverter can respond to
The standard configuration of the FR-D700 쐽 Independent motor setting
쐽 Simple cabling has a serial interface (RS485) which allows power failures using regenerative energy to
The independent motor setting is based on
communication with a PC and a PLC. perform controlled deceleration of the
The integrated spring clamps to connect the Autotuning function that can read out
Modbus RTU also is supported. motor. This prevents uncontrolled run-
control and power lines quickly ensure reli- all the parameters needed for the motor
down and damage, for example, to textile
able and simple cabling. model in less than a minute even when it is
Compliance to international standards such machines.
not running.
쐽 Easy parameterization as CE, UL, cUL, GOST, RoHS guarantees
쐽 Automatic restart after power
With the help of the parameterization soft- worldwide use. 쐽 High overload capacity of 200 %
failures
ware FR-Configurator a series of easy func- The maximum short-term overload capac-
쐽 Short service times In pump and fan applications you can con-
tions such as graphical machine analysis to ity of 200 % for 0.5 s minimizes downtimes
The fans are designed as compact units that figure the inverter to resume power after
optimize the drive system are available. caused by overload alarms.
can be replaced in less than 10 seconds for brief power failures. The system then
catches the coasting motor and automati- 쐽 Integrated brake chopper
쐽 Integrated control unit cleaning or in the event of failure.
cally accelerates it back to the preset speed.
The integrated Digital Dial gives the user The built-in brake transistor of the FR-D700
direct access to all important parameters 쐽 Integrated emergency stop supports direct connection of an external
much more quickly than would be possible function* braking resistor to improve stopping
with normal keys. power.
The FR-D700 series has an emergency stop
In addition to entering and displaying vari- input for safe shutdown. This ensures safe
ous parameters, the integrated four-digit operation in compliance with the European
Machinery Directive without installation of a
Additional energy
LED display also monitors and displays cur-
Door and gate drives are only some of the multiple applications of the new FR-D700 series. rent operating values and alarm messages. second protection mechanism. The FR-D700
thus conforms to the ISO13849-1 (EN954-1)
savings
cat. 3 and IEC60204-1 cat. 0 standards. The FR-D700’s OEC function helps to further
Removable comb-like cable
* available from summer 2008
optimize current and hence power con-
Entry into the drive bushing
sumption of the motor. The result is an
additional decrease in energy requirement
universe Cabling and fan replacement made easy compared to a conventional inverter.
Simple and safe operability, compact design 쐽 Failure safety with self-diagnostics
as well as improved performance features This inverter actively monitors its own func- Long service life
were the focus during the development of tional safety. If, for example, the fan rpm
the new FR-D700 frequency inverter. A drive decreases to 50 %, a pre-alarm is triggered. The FR-D700 is designed for a service life of
was created that set new standards in the An internal measuring program monitors over 10 years. This is made possible, among
field of compact drives. the ageing of the capacitors and an operat- other things, by high-performance heat-
ing hours counter enables the operator to resistant capacitors, cooling fans with sealed
Improved functions and device properties bearings and special lubricating grease. The
plan the best time for servicing. Protection
such as simplified cabling thanks to spring flow of cooling air comes into contact only
Conveyor belts and chain conveyors are an ideal appli- and overload functions like the phase fail- Only one protection mechanism is needed.
cation for the FR-D700. clamps, the integrated Digital Dial with LED with the heat sinks and not electronic com-
ure monitoring system for both the input
display, improved performance yield in the ponents. This ensures that no dust or dirt
and output circuits ensure trouble-free
low-speed range as well as the integrated The built-in multi-user panel with Digital Dial can collect on the components. The circuit
operation.
emergency stop function make the FR-D700 boards are protected against aggressive
the new standard in the ultra compact class. environments with single or double layer
conformal coating – another feature that
The FR-D700 is especially advantageous for ensures longer service life.
standard applications by virtue of its user-
friendliness. It is the correct choice in both
simple and more sophisticated applications.
Typical applications are feeder and con-
veyor drives, machining tools or gate and
door drives.
Specifications /// Product Information MITSUBISHI
EBG 184-EN ELECTRIC
FACTORY AUTOMATION
Overload capacity ND (normal duty)
60 seconds overload 150 %
0.5 seconds overload 200 %
FR-D700
Ambient temperature 50 °C
H
FR-D720S-025-EC 2.5 0.4 68 x 128 x 142.5
200 V Type
FR-D720S-042-EC 4.2 0.75 68 x 128 x 162.5 Frequency Inverters
FR-D720S-070-EC 7.0 1.5 108 x 128 x 155.5
FR-D720S-0100-EC 10.0 2.2 140 x 150 x 155.5
FR-D740-012-EC 1.2 0.4 108 x 128 x 129.5
FR-D740-022-EC 2.2 0.75 108 x 128 x 129.5 W H D