BENCHMARK
GPmark™ DETAIL Xmark™ DETAIL
|-+~—— 3.375 +0008 ——-
(PIN CONNECTION LENGTH)
—| 0.063
ea} fa. 0.125 See Note 2 1.750 Min.
See Note 2 Pit Free Zone
See Note 5
PRIMARY MAKE-UP SHOULDER} SECONDARY MAKE-UP SHOULDER
(SeAL) (PIN NOSE / MECHANICAL STOP)
Bevel Dia,
3.250 #04 2.357 #998,
Bevel Dia, — TF (PIN NOSE. DIAWETER)
NOTES:
1, Lead tolerance:
a. For 2 inches +0.006 inch
b. Recut threads if siretch exceeds 0.006 inch in 2 inches
2. Ether benchmark type is opplcable but not both
a. GPmark: 0.125 is new condition, shall be 0.188 max. after refacing
b, Xmark: 0.063 is new condition. After refacing a visible step
on the benchmark shall remain on the primary shoulder
Rethreading is required i there is no visible benchmark
TO taper 0.750" per ft.
335 Threads per inch
See Note 4
3. At Outside Diameter less thon 3.313, Bevel Diameter is vid Break Edge
and 1/32" x 45° becomes effective. 1/32" Nox. x 45° Re.
See Note 3
4. Surface fish requirement only applies during refacing operation
5. Area of the connection where pitting is not permitted in the thread roots
4] |Grant Pridecoy iiFeirrs ie roe] _XIF®27 / uXT*27 Pin
REFERENCE FIELD INSPECTION DIMENSIONS
INFORMATION ONLY
22/2020
9/5/2020
Assigned to:
eaet_| 6/28/2000
By
Sie P= ew 9/29/2000 bee =e
Uae: LE el eB] Ta 101