Professional Documents
Culture Documents
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 20h
Work area
1. Turn off the engine, 3. Keep bystanders and children away
set the parking brake, and block the while operating the tool. Distractions
tires before working on a vehicle. can result in loss of control of the tool.
2. Keep the work area clean and
well lighted. Cluttered benches
and dark areas increase the
risk of injury to persons.
Service
1. Tool service must be performed 2. When servicing a tool, use only
only by qualified repair personnel. identical replacement parts.
Use only authorized parts.
SETUP
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
Ram Attachments
1. The Extensions connect in different 6. The Rubber Head is used for popping
combinations to reach desired lengths. dents out of sheet metal such as
doors or body panels and to minimize
2. The Male Connector is used to connect
damage to the work surface.
the female end of the Ram to a Base.
7. The Wedge Head is used to repair
3. The Flat Base is used on the stationary
small dents and areas located
side to spread out the force of the Ram.
in angles and tight spaces.
4. The 90° V Base is used to offset the
8. The Ram Toe and Plunger Toe are
force of the Ram when there is not a
used together to allow spreading in
straight line between the stationary
areas that the Ram cannot fit into.
side and the damaged side, or
to spread out force on curved surfaces. Note: The Ram Toe and Plunger
Toe must only be used together
5. The Serrated Saddle is used on the
to prevent an off-center load.
pushing end to prevent slipping.
Spreader Setup
The Spreader is used when 3. Attach the Hose to the
the Ram is too long to fit between the Spreader, as shown below:
stationary side and the damaged area.
Hose
1. Clean the end of the Hose and
the inlet on the Spreader.
2. Unscrew and save the
End Plugs located on the end Spreader
of the Hose and Spreader. Pump
01
09
10
04
03
11
12
05d
05c
05b
13
05b
02
05a
R01
R12
R09 R02
R13
R03
R10
R11 R04
R05
R06
R14
R07
R15
R16
R08
R17
R19
R18
S12
S13
S04
S11
S10
S02
S09
S08
S01
S07
S06
S03
S05 S02
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts. Specify UPC 193175333186 when ordering parts.
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 90 days from the date of purchase.
This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence
or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,
injuries to persons or property, or for incidental, contingent, special or consequential damages
arising from the use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may not apply to you.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation
charges prepaid. Proof of purchase date and an explanation of the complaint must accompany
the merchandise. If our inspection verifies the defect, we will either repair or replace
the product at our election or we may elect to refund the purchase price if we cannot readily
and quickly provide you with a replacement. We will return repaired products at our expense,
but if we determine there is no defect, or that the defect resulted from causes not within
the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.