bolted joints in the structure. Specify your reason? 2.What are the conditions under which robotic leg may fracture? 3.A Honda Activa and An expensive Race bike need to turn at 10km/hr speed in a turning radius of 3m. Which bike would be easier to turn? Why? (Please explain your thought process clearly.) 4.Give few resons on why do we use washers with screws and bolts? 5.If a person spinning on a chair opens his arms, does his angular velocity change with respect to when his hands were close to his body? 6.If a bowling ball and tennis ball were thrown to the same height, neglecting air resistance which would fall down first? 7.What factors affect the lean angle of a turning motorcycle? Derive the general expression of possible. 8.If a system contains only a spinning ball, what is its net linear momentum? 9.How many different methods are there to throw an object using a purely mechanical mechanism? 10. What is torque and RPM. And state relation between them. 11. Find the maximum height and range for vo = 10 m/s, θ = 0, and Δdy = -5 m. a. h = 0, Δdx = 10.102 m b. h = 1, Δdx = 10.102 m c. h = 0, Δdx = 15.102 m d. h = 1, Δdx = 15.102 m
12. The speed of a jet ski in still water is
4km/hr. If the speed of the stream is 12x10^4 m/min, what is the speed of the jet ski against the stream? a.1.5 m/hr b.2 km/hr c. 2.5 km/min d.1 km/min
13. Two cars are driving on the road on the
two sides of a traffic light. The angle of elevation of the top of the traffic light observed from the cars are 48° and 15° respectively. If the traffic light is 121m high, find the distance between the two cars a.450.5m b.B.560. 5m c. C.460.5m d.D.540.4m 14. What is the time required to stop an object moving at π rad/s in one revolution? a.10π 2sec b.1π 2sec c.8π 2sec d.4π 2sec 15. At what speed should a car tire of 0.5 m diameter be spinning to achieve maximum grip when car speed is 100 m/s? a.200m/s b.150m/s c.100m/s d.50m/s