5)
MAINTENANCE OF MASOR MACHINE UNITS
2. Tailstock reference position
‘The tallstock is driven by @ servomotor on the basis of an absolute positioning system. The
controller has the factory-set reference position stored in its memory. If the stored data shoul
be lost due to a drop of the battery voltage or if the controler itself has been replaced, set and
store the reference position anew by the following, procedure:
(1) Press the machine menu key [=
(2) Select [MAINTENANCE] from the machine menu.
to call up the machine menu,
¥ 5 7
Fig, $35. Settng the taletock retoronce positon
(3) Press the [TAIL INILSET] menu key together with the MF1 and MF2 keys to highlight the
‘menu item in highlight display.
(4). Move the taiistock to its reference position by selecting AEE of the ial spindle switch.
The reference positon is preset at the following distance from the spindle edge to the
tallstock edge:
Uni: fr)
|Qistance rom the pnd edge to he tao ge
a
a
‘GiSmanio0 S 3000 _| 550 2558)
‘T-Smati60 S 3000 | 508 25.46),
‘GT-Smarts50 $ 600 | 671 3193)
Fig. 598| MAINTENANCE OF MAJOR MACHINE UNITS.
(6) Press the [TAIL HOME SET] menu key to fix the home position after the menu is
highlighted.
‘The POSITION display goes back to being red before the “machine position W axis” is
displayed,
next rs
a
era Fa nm
PS gg (
w 0. w 0. : )
7 UNo. o- oC )
Sires aio
ve eae Ret 0 0
ot Sob od od dn ow
oe 8°88 Geo F ba
Ses be) Ee? ore
8.085
TW ® T, SPOL MIN 5 ae”
aL” aut & Stn 1. 0. SD
me canon weg, mr
se
arise posi Tee vol Te
wore vo. | auocx | sme | orzo recae | courgsn | eusuee | esta
’ [Sa | oes | Par [sions | Bera) S| ‘ote
Fe 507 POSITION depoy- Wass zoo pont
(6) Select the (ENTE INL.SET] menu item anew (by the aid of the MF1 and MF2 keys) to clear
2 its highlighted display.
5.33