Professional Documents
Culture Documents
A Level Investment
A Level Investment
Investment most of the time refers to the purchase of capital goods such as equipment, vehicles,
building or improvements in the fixed assets. Investment is also done in several financial projects
to earn interest or profits.
TYPES OF INVESTMENT
1. Capital Goods
2. Construction
3. Stocks
4. Public Sector Investment
i.e. investing in government projects (e.g. saving schemes)
5. Investment in other financial projects in the private sector.
INVESTMNENT APPRAISAL
It means evaluating the profitability or desirability of an investment project. It also tells us how to
compare alternative projects. Investment appraisal is done using following two techniques:
1. Quantitative techniques/methods/factors
2. Qualitative techniques/methods/factors
QUANTITATIVE TECHNIQUES
1. Pay-back period
2. Average or accounting rate of return (ARR)
3. Internal rate of return (IRR)
4. Net present value (NPV) or Discounted Cash flow method
For every quantitative technique some basic information is required which is as follows:
1. Initial cost of investment
2. Life span or useful life of the investment
3. Residual value or scrap value or disposal value
4. Forecasted net cash flows = Forecasted Cash inflows – Forecasted Cash Outflows
QUALITATIVE TECHNIQUES
These are the factors other than the quantitative/numeric data; which is important for
investment decision making.
These factors cannot be so easily expressed in numerical yet have a crucial bearing on
an investment decision.
These factors are given below but not limited to this list.
1. The impact of proposed investment on environment and the local community
2. Degree of risk-taking power of the manager
3. Approval of the project may not be given by the government or pressure groups
may lobby against the project; all after commencement.
4. Ethical and environmental considerations
5. Human relations aspect
6. Aims, objectives and corporate strategies of a business
7. Availability of funds
8. Current cash flow position
PAY-BACK PERIOD
The pay-back period is the length of time it takes for the net cash inflows to pay-back the original
investment. This method is used to compare different projects and the project with the shortest
payback period is given consideration according to this criteria.
ADVANTAGES DISADVANTAGES
Example: $(000000) Æ
Project Year 0 Year 1 Year 2 Year 3 Year 4 Year 5 Year 6 Total Inflows
A (70) 10 10 20 20 30 40 130 5th
B (70) 20 20 20 20 20 20 120 4th
C (70) 30 30 10 10 10 10 100 3rd years
For Project A
10
×12 = 4 months
30
Payback period = 4 years 4 months
For Project B =
10
×12 = 6 months
20
Payback period = 3 years 6 months
For Project C
Payback period = 3 years
Project A
130 − 70
Avg =
6
50
= = 8.33
6
8.33
ARR = ×100 = 11.9%
70
Project C
100 − 70
Avg =
6
30
= = 5%
6
5
ARR = ×100 = 7.14%
70
Advantages of ARR
1. It uses all the cash flows unlike the payback period
2. It focuses on profitability
3. Easy to calculate, simple to understand
4. Easy for comparison between alternative projects
5. Can be quickly assessed against the minimum set criteria (required rate of return) of
a business
Disadvantages of ARR
1. It ignores the timings of the cash flow. It means that two projects having the same
ARR can have different payback periods.
2. As all cash flows are included, the later ones which are less accurate and less certain
are also involved.
3. Time value of money is ignored.
INVESTMENT APPRAISAL
Peter Stimpson, Page 450, Activity.
1. PROJECT X
PROJECT Y
5000
Last year’s months = ×12
35000
Payback period = 2 years
2. If payback is the only criteria chosen them Project Y should be chosen because it takes
exactly 2 years to regain the initial investment whereas Project X takes an additional 3 months to
only return the initial investment i.e. payback period for Project Y is shorter.
3. PROJECT X
90 − 50
Avg. annual profit = = $ 8000
5
8000
= ×100
50000
= 16%
PROJECT Y
112 − 80
Avg. annual profit =
4
= $ 8000
8000
ARR = ×100
80000
= 10%
4. Yes under the restriction, Project X would be acceptable as it has a return rate of 16%
which is higher than the set interior rate of 11%. Project Y would not be acceptable as it
has a return of 10% which is less than 11%.
5. Taking both ARR and pay-back period together I would advise the company should take
Project X. Even though it has a slightly higher payback period by 3 months but it has a
6% higher rate of return as compared to Project Y. Also its initial investment requires less
capital at $50000 while Project Y requires a very high sum of capital at $80000. So if
company has to borrow then it would borrow less for Project X which would mean less
burden of interest. Then a higher ARR means that Project X is very profitable as well
compared to Project Y and so it appears worth while to invest into Project X.
Not only does Project Y give a shorter ARR it also has a lesser life expectancy than
Project X. Measuring that while Project X lasts 5 years, Project Y only lasts 4 years after
which another investment would have to be planned. This could mean a great burden on
the financial position of the business. Also the Project Y doesn’t reach or meet the
required rate of return of 11%. So we can’t take this at all.
The additional information that would help me to advise better would be the financial
position of the business. If the business has a liquidity problem then it would be better to
choose a project with lesser or shorter payback period as it could then quickly pay of its
debts.
Secondly, if the business is investing only for profit so that its profitability improves then,
the project with a higher ARR would be both. So information related to profitability would
also be helpful.
Then knowledge about the affordability of business is also important. Only if the business
has a large amount of idle capital or can easily arrange for large sums of money then it
should invest in a project with high cost.
Also ethical knowledge of investments is required. If a project would produce a lot of
pollution, then it is sensible to discard it as this would give a bad reputation to the
business and could trigger action from pressure groups.
Also it would be helpful if the prevailing rate of interest in economy is known. This could
then be used to compare the rate of returns of both projects.