Professional Documents
Culture Documents
Remote controller
BRC1D528
1
3 6 23 7 8 9 2 1
10
4 11
12
14 22
17
25
16 13 15 18 19 20 21 5 24
29 33
26 35
27 36
37
28 30 31 32 34
1
2
Start
5s
5s
5s
5s
+
5s
End
2
BRC1D528 Remote controller Operation manual
1 ON/OFF BUTTON
8 EXTERNAL CONTROL ICON
Press the ON/OFF button to start or stop the system.
This icon indicates that another controller with higher
priority is controlling or disabling your installation.
2 OPERATION LAMP
The operation lamp lights up during operation or 9 CHANGE-OVER UNDER CENTRALISED
blinks if a malfunction occurs. CONTROL ICON
This icon indicates that the change-over of the
3 OPERATION MODE ICON installation is under centralised control assigned to
These icons indicate the current operation mode another indoor unit or optional cool/heat selector
(FAN, DRY, AUTOMATIC, COOLING, HEATING). connected to the outdoor unit (= master remote
controller).
4 VENTILATION MODE ICON
10 DAY OF THE WEEK INDICATOR
These icons indicate the current ventilation mode
( only) (AUTOMATIC, HEAT EXCHANGE, The day of the week indicator shows the current week
BYPASS). day (or the set day when reading or programming the
schedule timer).
5 VENTILATION ICON
11 CLOCK DISPLAY
The ventilation icon appears when the ventilation is
adjusted with the ventilation amount button ( The clock display indicates the current time (or the
only). Simultaneously, the ventilation amount is action time when reading or programming the
indicated by the fan speed icon (see 22). schedule timer).
16 OFF ICON
25 ELEMENT CLEANING TIME ICON
This icon indicates that the OFF action is selected
This icon indicates the element must be cleaned
when programming the schedule timer.
( only).
4 COOLING OPERATION
Press the button to toggle between limit
operation and the operations listed above. User adjustable parameters:
• Setpoint temperature, use the &
In limit operation, use the button to select buttons,
minimum and maximum temperature settings. Use • Fan speed, use the button,
the or buttons to adjust the • Air flow direction adjust, use the button,
minimum and maximum temperature settings.
• Ventilation mode, use the button,
1 FAN ONLY OPERATION
• Ventilation amount, use the button.
User adjustable parameters:
• Fan speed, use the button, 5 HEATING OPERATION
• Air flow direction adjust, use the button, User adjustable parameters:
• Ventilation mode, use the button, • Setpoint temperature, use the &
buttons,
• Ventilation amount, use the button. • Fan speed, use the button,
• Air flow direction adjust, use the button,
2 DRY OPERATION
• Ventilation mode, use the button,
User adjustable parameters:
• Air flow direction adjust, use the button, • Ventilation amount, use the button.
2 Adjusting the air flow direction The programmed schedule is time driven.
Make sure that the clock and day of the week
Use the button to adjust the air flow direction. are set correctly. Refer to "CLOCK SETTING
Press the button to switch between fixed or variable FUNCTION" on page 4.
air flow direction. Use the icon to determine the
fixed air flow direction by pressing the button
when the icon indicates the desired direction. Manually adjust the clock for summertime
and wintertime. Refer to "CLOCK SETTING
NOTE Even if fixed air flow direction is selected, FUNCTION" on page 4.
variable air flow direction can be enabled
automatically to preserve proper
A power failure exceeding 1 hour will reset
operation of your installation.
the clock and the day of the week. Refer to
"CLOCK SETTING FUNCTION" on page 4
3 SCHEDULE TIMER to adjust the clock and the day of the week.
All features and operation and programming of the The actions programmed in the schedule
schedule timer are described below. timer will not be lost after a power failure;
reprogramming the schedule timer is not
required.
Schedule timer operation
In schedule timer operation, the installation is also To set up the SCHEDULE TIMER refer to chapter 6.
controlled by the schedule timer. The actions "Programming the schedule timer" on page 10.
programmed in the schedule timer will be executed
automatically.
The schedule timer always executes the last
command; this means the user can temporarily
overrule the last executed programmed action. Refer
to "Manual operation" on page 5. The next
programmed action (in the schedule timer) will return
control to the schedule timer.
Use the button to enable or disable the
schedule timer.
What will the schedule timer do? Browsing the programmed actions in
If enabled, the schedule timer will execute the the schedule timer (read-out only)
programmed actions. Refer to figure 2.
It will order the installation to: Browsing the programmed actions of the schedule
timer is a sequential process. Only 2 buttons are used
• cool or heat, depending on the current
to browse the entire schedule timer program.
operation, if applicable; the setpoint will be
displayed, The button is used to start browsing, to display
the next programmed action or to exit browsing when
displaying the last programmed action.
Finally you must enter the time of the day when the
action must be enabled.
NOTE If you program 2 or more actions on the
same day and at the same time of the
day, only the action with the highest
action number (2 - 5) will be executed.
PROGRAMMING THE FIRST DAY OF THE WEEK • Press the button to toggle between
minimum set temperature and maximum set
NOTE In the guidelines below it is assumed that temperature in limit operation, the selected
you start programming the schedule temperature will blink.
timer actions on Monday and end with the • Enter the time when the action must start
schedule timer actions for Sunday. using the & buttons (min.
If you prefer NOT to start on Monday, first step = 10 minutes).
browse to the desired day and then enter NOTE If, by accident, you pressed the
the PROGRAM mode.
button, you activated the next action;
is displayed ( steady and blinking).
Press the button repeatedly until a
blinking is displayed. You can now
continue adjusting the settings for the first
schedule timer action.