Professional Documents
Culture Documents
Assistant
Objective
• Basic knowledge to use Genex Assistant
Sofware
• Basic knowledge how to analyze Drive Test Log
files
• Sample case for RF optimization
STEP BY STEP HOW TO SET UP GENEX
ASSISTANT
1. Create new project
2. Project Setting
3 Load Engineering
Parameter (Cell file)
4.Import Log Files
5. Set up analysis group manager
• Analysis group are used to grouping log file that use different
method in specific group. So we can load all logfiles at the same
time with different method and analyze separately.
6. Run Analysis (Binning)
• Analysis process already start, then
wait until All Logfiles done analysis
7. Default Analysis view
• After done analysis this windows will be
shown
8.Setting Legend
• This is sample if you want to customized the legend
for all parameter based on customer request
9. Show radio parameter on Map
10. Import Map file
11. Check serving PCI
• Checking serving PCI is used to check if crossfeeder
occurred or to check any overshooting cell
12. Check Statistic KPI
13. Checking Throughput KPI
SAMPLE CASE ANALYSIS
1. Cross feeder site
• Probem : Crossfeeder between Sector 1 and 2
• Solution : Switch feeder connection between sector 1 and 2
2.Low Throughput due to poor coverage issue