Professional Documents
Culture Documents
01 Adhesive and Selant Product Update
01 Adhesive and Selant Product Update
Feature K1420:
Feature K1401: • Low viscosity
• Surface insensitive • Very fast cure
• Bonds wood, metal, plastic, rubber • Excelent on EPDM and 'O” rings Feature K1410:
and porous or acidic surface • Suitable for most materials • High viscosity
• Bond in low humidity environments /combinations • Black color
(1420) • Designed to give maximum
(K1401) • Sets clear • Rubber toughened
KW1100045 performance on difficult to bond (K1410)
KW1100029 • Highly effective on porous and • Filling gaps
KW1100060 rubbers and plastic KW1100051 • Resist vibration and impact
KW1100068 difficult bond surface
Cured Product
Viscosity Cured Time Max Gap Dimension Weight
Article No. Description Strenght Appearance
(cPs) (sec) Filling (mm) (LxWxH) (mm) (g)
(N/mm2)
KW1100006 Super Bond K1495 20g 21 40 Clear 15 0.10 40 x 40 x 110 20
KW1100024 Metal Bond K1496 20g 21 100 Clear 30 0.15 40 x 40 x 110 20
KW1100029 Surface Insensitive K1401 20g 21 100 Clear 1 – 20 0.15 40 x 40 x 110 20
KW1100068 Surface Insensitive K1401 500g 21 100 Clear 1 – 20 0.15 80 x 80 x 190 500
KW1100045 Plastic & Rubber Bond K1420 20g 21 20 Clear 5 – 20 0.05 40 x 40 x 110 20
KW1100060 Plastic & Rubber Bond K1420 500g 21 20 Clear 5 – 20 0.05 80 x 80 x 190 500
KW1100051 Black Max K1410 500g 25 3500 Black 30 – 60 0.20 80 x 80 x 190 500
THREADLOCKER
Krisbow Adhesives Threadlockers perform by
filling the space between threaded metal parts,
forms a tough adhesive bond and seal when it
harden. It prevents vibration loosening and seal against
leakage and prevent corrosion. Available in a Feature K1262:
variety of strengths and temperatute ratings. Krisbow • High strength threadlocker for nuts,
Adhesive Threadlockers remain the most reliable way Feature K1242: bolts and heavy duty fastener
to lock and seal threaded fasteners of all shapes and • Medium strength threadlocker for • Studlock
sizes. Increasing performance while reducing cost. screw, nuts and bolts • High strength
• Nutlock • Prevent rust and corrosion
• Prevents corrosion • Thixotropic, prevents run off,
(K1242) • Vibration resistant (K1262) dripping and migration after
KW1100001 • Dismantle using normal tool KW1100002 assembly
Feature K1272:
• High temperature
studlock
• Resistant to
temperature up to Feature K1243:
230°C • Oil tolerant
• For large diameter threadlocker
Feature K1271: • Coarse threaded parts • Medium
• Permanent studlock • Uses steel mill con strength
(K1271) • Prevent vibration loosening (K1271) (K1272) veyor bolt, furnace (K1243) • Rapid curing
KW1100003 • Seal against leakage and corrosion KW1100081 KW1100004 mounting bolts KW1100048 • Removable
Feature K1962:
• Medium high strength anaerobic
retaining compound
• To augment the strength of slip,
press-fit assemblies, prevent
vibration loosening and leakage
through the bonded parts
• It can be used for difficult Feature K1680:
Feature K1641: assembly or very long • Recommended for retaining shafts,
• Allow disassembly engagement length applications gears, pulleys, and similar
(K1641) • Improve stress distribution (K1962) where a slow curing product is (K1680) cylindrical parts
KW1100022 • Removable using hand tools KW1100064 needed KW1100072 • High strength
PIPE SEALANT
Krisbow Adhesive Hydraulic Pipe Sealants are Feature K1542:
designed for threaded and pipe sealing. It replaces • Hydraulic sealant
traditional PTFE tapes and dopes. Products seal • Instant high pressure
instantly, will not shred, evaporate or shrink and Feature K1565: seal Feature K1577:
facilities assembly by lubricating the joint parts. It • With stands temperature • Used on small and • Low viscosity sealant
also resist pressure, vibration and temperature cycling up to 150°C medium pipes • An instant low
as well as hydraulic fluids, oil, fuel and lubricants. • Fast curing paste • Low viscosity pressure seal
• Dismantled using normal • Can be dismantled • Will not creep, shrink
tools using normal tools or relax
(K1565) (K1542) (K1577)
KW1100007 KW1100013 KW1100015
Pressure Temperature Dimension Weight
Article No. Description Viscosity (cPs) Appearance
resistance (psi) Range (°C) (L x W x H mm) (g)
KW1100007 Pipe Sealant K1565 50ml 10000 350000 White Paste -55 to 150 60 x 30 x 200 82
KW1100013 Pneumatic/Hydraulic Sealant K1542 50ml 10000 400 – 600 Brown Liquid -55 to 150 60 x 30 x 160 50
KW1100015 Pipe Sealant Low Viscosity K1577 50ml 10000 55000 Yellow Paste -55 to 150 60 x 30 x 200 82
GASKETING
Krisbow Adhesive Gasketing offer significant
performance advantages, even in today's complex
vehicle. It will not shred, evaporate or shrink. Krisbow
Adhesive Gasketing are suitable for gasket makers,
flanges, and pipe work.