aT
The Best There Is.
OWNER'S MANUAL
Carefully read this entire manual before using your new Browning firearm.
BT-1OO ssecessun rae sxrainNEW GUN OWNERS RECORD
eS
KEEP THIS RECORD FOR FUTURE REFERENCE
Browning Model
Serial Number
Gauge / Caliber
Purchase Price
Purchased From
Date of Purchase
Thank you for choosing a Browning BT-100 shotgun.
‘The BT-100 provides you with every advantage you need to shoot and score beter at the sport of trapshooring. An easily
removable and adjusable rigger group, high post rib, sleek forearm and optionsl adjustable stock ensure the highest level of
shooting performance. Features like the patented Ejector Selecor™ give you high degree of convenience. From the way the
BT-100 fis snug against your cheek, to the clan, crisp tigger and nacaral ability to break clays — the BT-100 spells perfor-
mance. Read this manual crefilly to gain the mos: from your new BT-100.
With reasonable amount of care, your BT-100 should give you many years of dependable, enjoyable shooting Please fel
free to write us immediately ifyou have any cbservations regarding its performance and operation.
A prownnG
One Browning Place, Morgan, Utah 84050-9326
Distributed in Canada by Browming Canada Sports idle, St-Laurent, Quebec HAS 16
Printed in USA. KP950600/95007
BT-100 SINGLE BARREL TRAP SHOTGUNYou Are Responsible
For Firearms Safety
Asa gun owner, you accept set of demanding responsibil
How seriously you take these responsbilies can mean the
difference beoween lifeand death, Failure to follow any of
these instructions can cause extensive damage to your gun
and/or posible serious injury or death to yourself and others
THERE IS NO EXCUSE FOR CARELESS OR ABUSIVE
HANDLING OF ANY FIREARM. AT ALL TIMES HANDLE
ANY FIREARM WITH INTENSE RESPECT FOR ITS
POWER AND POTENTIAL DANGER.
READ AND UNDERSTAND ALL OF THE CAUTIONS
AND PROPER HANDLING PROCEDURES OUTLINED
IN THIS BOOKLET BEFORE USING YOUR NEW
FIREARM.
1 ALWAYS KEEP THE MUZZLE OF ANY FIREARM
POINTED IN A SAFE DIRECTION.
Do this even though you are certain iti unloaded.
Never point any firearm at anything you do not intend
to shoot, Beexcremey alert and aware ofall personsard
property within the range of your ammunition.
2 CAUTION: THE BT-100 SHOTGUN HAS NO
MANUAL SAFETY.
Anrap shooter does not load his or her gun unc
moments before a bird is called fo. Fortis reason, and
because trapshooting demands intense concentration on
shooting technique, no manual safety is provided on
your BT-100, There is then no chance for los bird by
reason ofthe safery being inadvertently left “on safe.”
LOAD YOUR BT-100 TRAP GUN ONLY WHEN
SHOOTING IS IMMINENT. ONCE LOADED, THIS
GUN IS READY TO FIRE AND SHOULD BE
RESPECTED AS SUCH.
NEVER TEST THE MECHANISM OF ANY FIREARM
WHILE IT IS LOADED OR POINTED IN AN UNSAFE
DIRECTION.
3
WHENEVER YOU HANDLE ANY FIREARM, OR
HANDIT TO SOMEONE, MAKE SURE ITIS
COMPLETELY UNLOADED.
Always open the action immediatly, and visually check
the chamber. Meke certain thatthe chamber does not
inadvertently contain any ammunition, Always keep the
chamber empty and che safer in the “on safe” position
where applicable) unless shootings imminent.
DO NOT TRANSPORT ANY FIREARM LOADED.
Keep al firearms unleaded during transport, whether
stored in a holster, gun case, scabbard or other container.
BEWARE OF BARREL OBSTRUCTIONS.
Do this frche fey of bath your gun ard yoursel
Mad, snow, and an infnie varity of ether objects may
inadvercently lodge ina barrd bore. I takes only one
small obstruction to cause dangerously increased pressures
tha can ruin (swell or rupture) he finest barr,
BEFORE CHECKING FOR A BARREL
OBSTRUCTION, BE CERTAIN YOUR FIREARM IS
FULLY UNLOADED.
Make sure no live round is in the charaber by breaking
cpen the action. Look through the barrel to be sure iis
clear of any obstruction IFan obstruction i sen, no
‘matter how small it may te, clean the bore with a deening
rod and patch as described later in this manual. Before
the fis firing, clean che bore with a cleaning rod and
gatch, and wipe away any ant-rust compounds in the
action/chamber area.
ALWAYS COMPLETELY UNLOAD ALL FIREARMS
WHEN NOTIN USE.
Asa safery precaution, itis preferable co disassemble
your gun for storage, Your responsbliies do not end
‘when your firearm is unattended. Store your firearm and
ammunition separately and well beyond the reach of
children, Take all safeguards co ensure that any firearm
does not become available to untrained, inexperienced or
unwelcome hands.
USE THE PROPER AMMUNITION.
‘The barrel and action of all Browning firearms have been
made with substantial safety margins over the pressures
developed by established American commercial loads.
Nevertheless, Browning assumes no liability fr incidentswhich occur through the use of cartridges of nonstan-
dard dimensions which develop pressures in exoess of
commercially available ammunition which has been
locded in accordance with standards established by the
Sporting Armsand Ammunition Manufactures’
Institute (GAAMD.
BE ALERT TO THE SIGNS OF AMMUNITION
MALFUNCTION. IF YOU DETECT AN OFF SOUND
OR LIGHT RECOIL WHEN A SHELL IS FIRED,
DO NOT LOAD ANOTHER SHELL INTO THE
CHAMBER,
Open the action and remove the shel from the chamber.
With the action open, glance down the barr to make
sure that a wad or other abstruction doesnot remain in
the barrel. Completely clear the barel before loading
and fring agzin. Failure to follow these instructions can
cause extensive damage to your gun and possible serious
injury to yourself and other.
8 MAKE SURE OF ADEQUATE VENTILATION IN THE
AREA THAT YOU DISCHARGE A FIREARM. WASH
HANDS THOROUGHLY AFTER EXPOSURE TO
AMMUNITION OR CLEANING A FIREARM.
Lead exposure can be obtained from discharging
firearms in poorly venelaed areas, deaning fircarms or
tandling ammunition. Lead isa sutstance that has been
Irnown to cause birth defects, reproductive harm and
ther serious injary.
9 NEVERINSERT A SHELL OF THE INCORRECT
GAUGE IN ANY SHOTGUN.
“The gauge of your shorgua is marked on the side of
thebarrl. Storeal shel of dffeene gauges in
completely separate and well-marked containers. Never
score shells of mixed gauges in a common container or
in your pockets
EXAMINE EVERY SHELL YOU PUTIN YOUR GUN.
NEVER PUT A 20 GAUGE SHELL IN A 12 GAUGE
GUN.
“The mos cerain way to bulge or rupture a shotgun bar-
relis to drop 20 gauge shell into a 12 gauge chamber.
‘The 20 gauge stell, unforcunately, will noc all com-
pletely chrough the barrel; its ri is caught by the front
ofa 12 gauge chamber. Your gun will misfire (withthe
chamber appearing tobe empty), Ieis then possible ro
Toad a 12 gauge shell behind the 20 gauge shel. Ifthe
12 gauge shell is chen. ied, the result willbe a so-called
“12-20 burst” which can cause extensive damage to your
gun and possible serious injury to you and others.
10 USE SHELLS OF THE CORRECT LENGTH.
Do not use 3-1/2” shotgun shells ina shotgun or barrel
with a 2-3/4” chamber or 3” chamber. Do not use 3”
shells ina shorgan chambered for a 2-3/4 shells, Doing
so can result ina build-up of dangerously high pressures
that may damage your gun and possibly cause serious
injury to yourself or others.
“The size of the chamber is inscribed, along with gauge
and choke designations, onthe side ofthe barrel.
11 DONOT SNAP THE FIRING PIN ON AN EMPTY
CHAMBER — THE CHAMBER MAY NOT BE
EMPTY!
“Treat every gun with che respect duc a loaded gun, even
though you are certain the gun is unloaded
12 KEEP YOUR FINGERS AWAY FROM THE TRIGGER
WHILE UNLOADING AND LOADING, UNTIL YOU
ARE READY TO SHOOT.
13 BE SURE OF YOUR TARGET AND BACKSTOP.
Particularly during low light periods. Know the range of
yourammunition. Never shoot at water or hard objects.
14 ALWAYS UNLOAD THE CHAMBER OF ANY
FIREARM BEFORE CROSSING A FENCE, CLIMB-
ING A TREE, JUMPING A DITCH OR NEGOTIATING
OTHER OBSTACLES.
Never lan or plce any loaded firearm on o against
fence, ree, af, or other similar object.
15 WEAR EYE AND EAR PROTECTION WHEN
SHOOTING.
Unprotected repeated exposure ro gunfire can cause
hearing damage. Wear ear protectors (shooting car plugs
or muffs) to guard aginst such damage. Wear shooting
lasses 0 protect your eyes from flying pacicles. Always
keep a safe distance between the muzzle of your
firearm and any persons nearby, as muzzle blast, debris
and cjecting shells could inflict serious injury. Also, wear
ye protection when disassembling and cleaning all
firearms to prevent the possibility of springs, spring-
tensioned pars solvents or other agents from contacting
your eyes.16 DROPPING A LOADED GUN CAN CAUSE AN
ACCIDENTAL DISCHARGE.
This can occuc even with 2 ficarm’s “safety” in the “on
safe” positon (remember, your BT-100 has no manual
safey). Be extrcracy careful while huncing or during
any shooving zctivity, ro avoid dropping any firearm,
17 IF ANY FIREARM FAILS TO FIRE, KEEP THE
MUZZLE POINTED IN A SAFE DIRECTION,
Hold this positon for a minimum of 30 seconds
Carflly open the acon and remove the hell or
cartridge, Ifthe primer is indented, the cartridge should
be disposed of in away that cannot cause har. IF the
primers not indented, your firearm should be
examined by a qualified punsmith and the cause ofthe
ralfurction should be concted before further use.
18 BE DEFENSIVE AND ON GUARD AGAINST
UNSAFE GUN HANDLING AROUND YOU AND
OTHERS.
Don’t be timid when it comes to gun safery. Ifyou
observe other shooters violating any of these salety
precautions, politely sugges safer handling practices.
19 BE CERTAIN ANY FIREARM IS UNLOADED
BEFORE CLEANING,
Because so many gun accidents cccarwhen afiearm is
being cleaned, special and extreme care should be taken
to besure your gun is unloaded before disassembly,
dleaning and reassembly. Kecp ammunition away
from the cleaning location. Never test the mechanical
function of any fircarm with live ammunition.
20 SUPERVISE AND TEACH FIREARMS SAFETY TO
ALL MEMBERS OF YOUR FAMILY — ESPECIALLY
TO CHILDREN AND NONSHOOTERS,
Closely supervise newcomers to the shooting sports.
Encourage enrollment in hunting/shooting safety courses,
21 NEVER DRINK ALCOHOLIC BEVERAGES OR
TAKE ANY TYPE OF DRUGS BEFORE OR DURING
SHOOTING.
Your vision and judgment could be dangerously
impaired, making your gun handling unsafe ro you and
tw others.
22 PERFORM PERIODIC MAINTENANCE.
AVOID UNAUTHORIZED SERVICING.
Your new firearm isa mechanical device which will not
lac forever, and as such, is subject to wear and requires
petiodic inspection, adjustment, and service. Browning
firearms should be serviced by a Browning
Recommended Service Center or by Browning's service
fadlity in Amold, Missouri. Browning cannot essume
any responsibil for injures suffered or cused by
unauthorized servicing, alterations or modifications of
Browning firearms,
23 BROWNING RESERVES THE RIGHT TO REFUSE
‘SERVICE ON FIREARMS THAT HAVE BEEN
ALTERED, ADDED TO OR SUBSTANTIALLY
CHANGED.
Removal of metal from bartel(), o: modification ofthe
firing mechanism andfor operating part may kad to
Browning's refusal of service on such firearms, Browning
will charge the owner for pars and labor to return the
fitearm to original Browning specifications.
Read and heed all warnings in this instruction book, on
ammurition boxes and with all accesories that you install on
yourfircarm, Iris your responsibilty to secure the most up-
to-date information on the safe handling procedures for your
Browning gun, Browning assumes no lability for incidents
which occur when unsafe or improper gun accessories or
ammurition combinations are used
DO NOT, UNDER ANY CIRCUMSTANCES, ALTER THE
TRIGGER OR OTHER PARTS OF THE FIRING
MECHANISM OF THIS OR ANY OTHER FIREARM.
FAILURE TO OBEY THIS WARNING MAY RESULT IN
INJURY OR DEATH TO YOURSELF OR OTHERS.
BE CAREFUL!Figure 1
Recoil Pad Receiver
Rib Barrel Ports
(optional)
“Trigger
Heel Buttstock
Nomenclature
Forearm
Barrel 4
Muzzle
Ammunition
In conventional gun terminology, the position and move-
ment of gun parts are described as they occur with the gun
horizontal and in norma firing position; ie. the muzzle is
forward or frong bute stock is rearward or rear; ciggeris
dowmvard or underneath; the rb is upward or on top. For
general pars nomencature refer to Figure 1, For specific
parts names dated to disassembly se Figure 2.
Serial Number
The serial number of your BT-100 can be found on the
top tang under the top lever. Record this number for furure
reference,
Figure 2
AILBT-100 Models are cksigned to shoot and function with
2.3/4” 12 gaage tap loads only. Browning can assume no
responsibility for incidents which occur through the use of
cartridges of nonstandard dimension or dose developing
pressures in excess of industry standards establiched by the
Sporting Armsand Ammunition Manufactures’ Institute
(SAAMD).
CAUTION: DO NOT USE 3” OR 3 1/2” SHOTGUN
SHELLS IN ANY SHOTGUN OR BARREL WITHA
23/4” CHAMBER, THE SIZE OF THE CHAMBER IS
INSCRIBED ALONG WITH GAUGE AND CHOKE
DESIGNATION, ON THE SIDE OF THE BARREL.
- :
e
Barrel lug
Takedown
Lever,
Hinge pin
Forearm .
Takedown
bracket
lever latch
Trigger GroupVarious posed mata pers of your new BT-100 have been
coated at the factory with a rust preventative compound.
Before assembling your BT-100, clean che ant-rust
compound from the inside ofthe bare and chamber, and
generally wipe clean the metal surfices a the rear of the
forearm, on the barel lug andthe interior areas ofthe
receiver s well as any other parts coated with his com
pound. Browning Oils ideal for wiping and cleaning these
parcsand for giving your gun its fist lubrication
(Clean che barrel using a cleaning red and patch as explained
under “Cleaning Suggestions.” Read this entie manual
before performing the frst cleaning, to learn necessary
information on breaking open the action, ete.
Assembly Procedures
BEFORE BEGINNING THE ASSEMBLY PROCESS,
ALWAYS MAKE CERTAIN THERE IS NO SHELL IN THE
CHAMBER,
1 After wiping che mechanism clean place one or wo
érops ofa quality oi, ike Browning Oil, onthe follow
ing surfaces (See Figures 3, 4 and 5):
Figure 3: The forearm bracket.
Figure 4 Bartel lug, hinge pin bearing surface,
gjector, ejector extension and bare lat
Figure 5: Hinge pin, cocking lever and locking bok.
Figure 4
Hinge pin
ee
eis
2
E
Figure 6
To attach the bauer the action, grasp the tacks pistol
grip with your right hand and anchor the burt stock
Between your right Forcarm and right side. With the
thumb of your right hand, move te top lever sideways
to the exteme right (Figure 6).
ret3 Grasping the barrel inthe lft hand, engage the barel
lug’ circular recess with the acton’s hinge pin
(Gee Figure 7) Keeping pressure on the barrel to keep
che hinge pin aligned in the barrel lugs circular recess,
rotate the barel upward, fully dosing theaction
(ee Figure 8).
4) Release the top lever It should snap back to its central
position
Figure 7
5. Plice the burt ofthe gun's stock against your upper keg
co support it. Engage the rear portion of the forearm
(forearm bracket) with the action (See Figure 9).
6 Pivot the forearm up tothe bare ightly. This will
cause the akedovn lever larch co engage onto the barrel.
Te may be necessary to depress the takedown lever latch.
Ieshould be flush with the wood on the underside of
che forearm. The forearm and larch can be installed in
Figure 10
Figure &
cone motion by positioning the forearm as shown and
tapping the forearms widest pare sharply toward the
barrel with the heel of your kand (See Figure 10), The
takedown lever ach should then auromstically lode
into position.
CAUTION — WHEN ASSEMBLING YOUR BT-100
D0 NOT USE UNDUE FORCE IN CLOSING THE ACTION.
IF theaction and barrel are not property aligned, undue force
will only cause chem to grind together and score or mar the
finely ited surface,
If there appears to be interference, start over at Step 2, being
careful ro marc and align the bare hig and the rcciver
hinge pin properly.
Disassembly Procedures
issembling your BT-100 into two parts — the
action/buustock and the barrd/forearm — is ideal for
storage ot for cleaning and maintenance.
BEFORE BEGINNING ANY DISASSEMBLY
PROCEDURES MAKE CERTAIN THERE IS NOTA
SHELL IN THE CHAMBER.1 With the action dosed, anchor the butstock against
your upper leg and pull che takedown lever ltch
ouward.
2 Atthe same time, pivot the forearm avvay from the
barrel (See Figure 11). Set the forearm aside.
3 Break open the action in the usual manner
Figure 11
4 Carefully disengage the barrel lug from the hinge pin
and lif the barel upward our of theaction.
5. Reattach the forearm to the barre as explained
previously, except with the barrels separated from the
receiver. This an ideal and safe way to store your
shoigun —in two separate pices
No Manual Safety
CAUTION: REMEMBER, THE BT-100 SHOTGUN HAS
NO MANUAL SAFETY. THE BT-100 IS DESIGNED
‘SOLELY FOR TRAP SHOOTING.
A tap shooter does not load his or her gun until moments
before bird is called for. For this reason, and because
trapshooting demands intense concentration on shooting
technique, no manual sfery is provided. There i thea
ro chance fora los bird by reason of the safety being
inadvertendy let “on safe.”
LOAD YOUR BT-100 TRAP GUN ONLY WHEN
SHOOTING IS IMMINENT. ONCE LOADED, THIS GUN
1S READY TO FIRE AND SHOULD BE RESPECTED
AS SUCH.
Always keep the muzzle of your shotgun pointed down range
at al times when on the shooting lin. When leaving or mov-
ing along the line always open the action, Never have the
action of your BT-100 closed except when you are on the
lin, realy to shoot, when your gun is cased, or when it is st
in a gun rackat the range. When you rerieve your gun from
its case or froma gun rack, always immediatly open the
action and check to assure that no shells in te chamber.
ALWAYS KEEP THE MUZZLE OF YOUR BT-100
POINTED IN A SAFE DIRECTION.
FAILURE TO FOLLOW THE ABOVE INSTRUCTIONS
COULD RESULT IN INJURY OR DEATH TO YOURSELF
OR OTHERS.
General Operating Procedures
Highly skilled techniques of hand-fitting and polishing have
been used toaccomplish the hairline fitting of metal pats
on this gun, These painstaking operations are necessary to
prevent looseness, even afte long use. You may consider
your new gun tobe slightly stiff. This close fing, however,
assures you of long lasting cependabilcy.
OPERATION OF THE TOP LEVER —
‘The top lever operates the locking bolt, which is very closely
hand-fittd tits barrel lugs. Provision is made for the
gradual wear of locking surfaces by allowing slight excess
of metal, This exacting metal allowance keeps the breech of
the gum tight for many years.
Upon closing your gun, let the tp lever snap into position
= do not retard its action with your thumb. If closed in this
manner, the top lever spring will ecurn the top lever mecha-
nism to the locked position, [eis not necesary thac the top
ever return to a completely central postion; in fact, it usally
will nc do so in a new gun, Many experienced shooters
caltivare the habit of lightly pushing the top lever to the lft
afier the gun is closed, It becomes automatic and isa quick
method of assuring yourself thc forcign matter has not
inrerfered with the complete closure ofthe breech.
‘The breech is so tightly hane/-fced thas foreign mater, sand,
etc. may prohibit complete closing.
IF THE BREECH WILL NOT CLOSE COMPLETELY,
UNDER NO CIRCUMSTANCES SHOULD YOU ATTEMPT
TO FIRE.Browning BT-100 Parts List
BT-100 Shorgun ony. Important When ordering pars lis part number, part name, gauge and sal number.
“Thispussrefes othe Bev
Feel free tose our roll free EAX number for pans erders: 1-800-817-4755.
Part. _vesepton
Poe@12" Concer B10
POSS ConeectrPaBT-10
Pomme’ Contec Seng I-00 om
PORGDIS' Contec Sing BT-4C0 Son
PORDIE' Conc Sin Pi BT-100
Poserad’ ecorE-93, BT Max &BTI00
Posen’ ctr Eteon B70)
PORES jaca HammerSping BT. BT:100
Pouar48 ec HarnerSping Guide T-988 37-00
Possiat fect Harner Sping Guide Bale T-100
Posarse" cur SearBT296 87-100
POSGTS! Gecbr SearPnBT398 87-10)
Oma ctr SearPinSping BT-9 887-100
PosarS8 Bec Sear Pn Sping Fewer
Br88ST-100
pet Sedo Bod BT-400
oua030 Rec Seledor Push Buiter BT106
PORGIS2 ec Ser Sra BT-100
PORES ect Seledor Sprig Pinger 37-00
POSES. ter Seer Spring Fetating Seow 87-00
93728 Ete Sop Sern BT & B00
PORE er Tip Rod T-10
PORITS' Feeam&BT100
PoogTHO Fecam 813790 8BT 10
Poeaas Fem Bot ESofcheen BT 4 8-10)
POLE Fear eat B00
PORE Fecam adel Sess 710)
PORUTBT Fear Screw BF 8 B10
POSE" FrngPinBT100
PCQOH7 FingPinGetPinB-I00
O29. FingPin ping BT-100
PORSO" Harmer 8-00
POSSE" Harner ie 100
POR3S3. Hamner ie: Pr BT-00
PORS4 Hamner LAB Roo BT-00
PCSGEE Hamner Lite Rie in BT100
PORSIST" Henne ites Rte BT-100
FORKS. Hurmertite Rest ScewBT100
PORSt60 Harner ter Spng8:100
PartNo__Desorption
Posao6s Henrer Fin 7-00
PORE ont in BT-9 8 100
POR" Jont Fn Rearing Soen B29 8-10)
PORE" Lexy Bt F100
PORGOTO" Leng Bt Pr BT-10
PORGO" Lover Coenedtr Sing FolowerBT:100
POLGOTA MsnsiegBT-A0n
POKGO0OMainsping Gide BT-100
POLO Mainying Guide Resi 87-100
OHS" Pash FodBT-I00
POs Push RodRething cre 8100
POtGa" Sear BT-100
POHHO" Sear Seg BT-CO
PORoNe" Sear Sprrg Foner 7-100
POKORS" Suck Compete Ausable B-100
POHON8" Suck Verte Cate BT-100
POXGI00" Suck Thunbole 100,
POINTS Stuck Ad. Sti Sen Cio Sporing Clas
8 BT-0
POGI22" Stack Base & Cesk Poe Ay. BT-100
POKRseS Stok Bot $0 BBT100
POSED Six Bot Loc washer B88,
Tee Max&ET-10
POSGBET Stk Bot NasherBT.994 81-10)
PO%2690" Ta Down Lower BT. 887-100
OSQ622" Te Down Lever Staless 87998 ET-10)
P0223" Tale Dom Leer Bracket As
81998 87-10)
PO%3027" Tale Down Lover Bracket cy. Sais BT.29
aer-400|
POSEY. Tale Own Lever Bake Sew 100
PO! Tale DmnLeverBacet Screw
Searles BT-99& T-100
PONE Tale DownLovr Pin 67.99 887100
POS Tale DnLerer Sing 9883-100,
POS9I5 Te DownLeve ping Screw BT-998ET-100
POS0O1* Tapered Fateg Rb 2 E7100
POs" Tapered Fata Ro" E100
POE Top Lover BT-100
POIBH2 Top Lover Stee 81-100
PORT Top Leer Retane BT-100,
FortN_escigion
FOBHS TopLeerReléerSaewT00
FOSD143 TopLee Spin T-100
FOSSIS0" TopLeeTipBT-100
FOSSIL” Topewr Tipit 8-40)
FOSS TopLewrTipSpngT-00
FOSSIGD TiagerBT400
FOSS? Tiger.
FOSSI6S TiagerBlck SoregB-100
FOIE TigerGua BT-00
FOSSI72 Tiger Gud Sts BT-400
FOSSITA TegerGuz PnBT-100
FOssITs TmerPlae B10
FORDE Tggtelae SaineeeBT-400
FOXTEL Tiger Este yr B1-00
FORGI8S Tigers Esc Song SoowBT100
Fomor TiggePie UeT00
OSDIR" Tiger Rese ut T-100
FORGI9N Tegel Poles Set So T-00
FORD Tegel Rlese Spring T-100
Poga198. Toner Pu A. Seren BT:100,
088200. Tigger Sep Sew BT-100
POSGOS UperCeneco Sing Flower BT-100
POGTi42 CropStop Se BT-100Ci Spacing Cys
POGDRGH Sock Ad, Nut B10, E40 Ps 6 Cio Ph
POSSESS Soot Ad. Pte 8-00, 8700 Pus & Choi Ps
POGGSL Sick Ad. Pte Sot crew T1029 Fs,
GioPis,& Cis Spring Cay
‘oc Ag. Set Se B10, BT, 8
(Con A edo
POsGiS2 SockAd Std ET-100,
BF-99 is & Cae Fs
Poessst
“inate part rust be fit your hop or aqualfedcunemih,“*Indates part must be ited by Brin’ senice ain Amol, Missouri,
+ Partmay bo purchased enly by holes ol curert vail Federa roams License.Browning BT-100 Single Barrel Trap Shotgun
aguideroasemble gus,
‘CAUTION:
BROWNING PARTS
ARE MADE
EXCLUSIVELY FOR
BROWNING GUNS
AND ARE NOT
RECOMMENDED FOR
USE IN OTHER GUNS
EVEN THOUGH
MODELS MAY BE
SIMILAR,
INADEQUATELY
FITTED PARTS MAY
BE DANGEROUS,Break the gun and unload it, Carefully examine the breech
surfaces, and eraore the foreign macter, Remember to
always keep the polished breech surfces clean and lightly
oiled.
LOADING —
CAUTION: REMEMBER, THE BT-100 SHOTGUN HAS
NO MANUAL SAFETY. LOAD YOUR BT-100 TRAP GUN
ONLY WHEN SHOOTING IS IMMINENT. ONCE
LOADED, THIS GUN IS READY TO FIRE AND SHOULD
BE RESPECTED AS SUCH, AT ALL TIMES DURING
THE LOADING AND UNLOADING PROCEDURES BE
‘SURE YOUR MUZZLE IS POINTING DOWN RANGE, IN
A SAFE DIRECTION.
1 Break the action as explained above.
2 Insert shell lly imo the chamber.
3 Close theaction by pulling up on the forearm. The lever
will snap back to center when properly closed.
Remember, keep your finger away from the rigger until
you are ready to shoot.
UNLOADING —
Open the action by pushing che rop lever tothe right, as
exphined previously.
Pall down on the forcarm. The BT-100 has a special
Fjctor-Selector™ system chat allows you to set your
mode of gjction, Instructions on setting the mode are
detailed below.
FIRING YOUR BT-100 —
Wich the chamber loaded, and the ation closed, the BT-100
is fired by simply pulling the trigger. Never pull che trigger
unless the muzae is pointed down range, a the cy ange.
Make sure people—other shooters, spectators, rap opera
tors—are not down range, IF there is any doubr about down
range safety, open the zction immediately and remove the
shall until yoa are certain all conditions are safe.
Removable Trigger Assembly
Your BT-100 features a removable tigger assembly that
allows you vo make wo adjustments (1) secting the cjec-
tion mode and (2) setting the amount of rigger pul. To do
cither adjustment you must ise remove the assembly.
Figure 12
Figure 13
BT-100
REMOVING THE TRIGGER ASSEMBLY —
MAKE CERTAIN THERE IS NOT A SHELL IN THE
CHAMBER .
Locate the trianguler-shaped burton on the lef side of
the recsiver, directly behind the trigget.
2 Push cis burton in o the sight and hold the bution in
the same time pulling down on the rigger
guard, This wil remove the assembly out ofthe action
(See Figures 12 and 13).
3 Reinsallation isthe reverse. With your gun sill
unloaded, start the trigger assembly in front frst and
angle itupward until the back end clicks into position
—engeging the release mechanism. Ie is not necessary
to push in on the triangular-shaped button to reinstall
the assembly,
EJECTOR-SELECTOR™ —
‘The patented Ejector-Selector™ feacure of the BT-100
allows you to select whether you want fired shells to be (1)
jected clear of the shotgun or (2) elevated in the chamber
for casy removal. In cither case, an unfired shell will be con-Figure 14
is
US Peer eter la
Coa
iselector to/ejectiempties or tojelevatel)
them in the chamber.
veniently elevated slightly out ofthe chamber for easy
removal with your fingers.
1 Toadjust the Ejector Selector™ you mus fist remove
the tigger assembly as exphined previously.
2. The Ejector Selector™ is the round, seewlike part on
the left side of the trigger assembly (See Figure 14).
3. The Ejector Selector™ is pre-set atthe factory to eject
fied shell. The selector switch has a groove in the
rmidale (likea screw head) with a fatsurice on one side
and an indented surface on the other. With the switch
see withthe lat surface up, your BI-100 will devate
eraptcs in the chamber for easy removal. With the
indented surface up, empties wil be ected clear of the
gun. To change the setting of the Ejector-Selecror™
simply take dime or screwdriver and turn the Ejector:
Selector” 18¢*, either clockwise or counterclockwise
until you heara click (See Figure 15).
When collecting ejected empry shel, simply brace the burt-
scock berween your torso and forearm, and, afer unlocking
theaction, cup your hand over the chamber before the
action fully breaks open and the shel ejects. The shell wil
Figure 16
Berra Mes tara
RieneunCn eer a cos
Loosen to decrease triager pull.
pop up into your hand. Ifyou will be seangsl onto the
ground iris important to point the chamber—by slightly
canting the shorgun tothe right (efor left-handed
shooters)—so the shal ejects clear of your body and fice.
Remember, never have the action of your BT-160 closed
excep when you are on the line ready o shoor, when your
gun iscased, or when itissetin a gun rack at the range leis a
courtesy t0 other shooters, and a wise safety practice, ro keep
your action open a all other times,
ADJUSTING TRIGGER PULL —
Trigger pull on your BT-100 is adjustable from approximate-
v3 M2c05 1/2 bos.
| Toadjus the trigger pull you muse fse remove che wig:
ger group following the directions outlined previously.
2 With the trigger asembly removed, locate the trigger
pull adjustment scew in the rea ofthe tigger group
(Gee Figure 16).
3. Toiinerease the amount of trigger pall needed to fre
your BT-100, tighten or turn the screw clockwise, When
fally tightened, rigger pull is approximarely 51/2 Ibs.
Tolesen the rigger pull need vo fire your gun, loosen
or turn the screw counterclockwise. With the trigger pull
adjustment screw fly loosened rigger pulls approxi-
mately 31/2 lbs. Should the crigger pull adjustment screw
become loesened tothe poine i ills out ofthe trigger
assembly, tigger pul still remains approximately 3 1/2
Ibs. Reinstall the tigger assembly asexplined cali.Figure 18
WARNING:
NEVER TAMPER WITH THE TRIGGER PULL ADJUST-
MENT MECHANISM IN ORDER TO ALTER THE MINI-
MUM SETTING OF THIS OR ANY OTHER FIREARM'S
TRIGGER PULL.
« NEVER ATTEMPT IN ANY WAY TO MODIFY OR ALTER
SEAR ENGAGEMENT OR ANY OTHER TRIGGER
ASSEMBLY COMPONENT.
Optional Adjustable Comb
This section applies only if your BT-100 sited with the
optional, adjustable comb feature, Otherwise you may skip
these instructions,
Adjustment of the comb allows you to achieve a perfect fit of
thestock agains: your face, This ia crucial adjustment
because it determines how correctly ard consistently your
«yell line up with the sight plane along the rib.
ADJUSTING CAST ON AND CAST OFF —
ABT-100 correctly adjusted for cat on and cas off will
have you looking directly dow the center ofthe rb with
the rone and middle beads in alignment. To adjust cast on
and cast of, perform the following:
BEFORE PERFORMING ANY ADJUSTMENTS ALWAYS
MAKE CERTAIN THERE IS NO SHELL IN THE CHAM-
BER.
1 Loosen the two stock adjustment set screws on the right
side ofthe removable check piece and remove the cheek
piece by lifting upward (Se Figure 17). Ths exposes
the Cast On and Cast Off adjustment mechanism, The
cheek piece comes set from the factory with cast inthe
center position.
Loosen both of the stock adjustment stud screws locared
in the top ofthe stock adjustment studs using the larger
mm allen wrench provided (See Figure 18), I takes
about 1/4” turn co loosen them adequately.
3. Slide cach stud equally inthe desired direction, Each
atk indicates 1/16",
4 Move the studs tothe right for Cast OF.
Move the studs to the left for Cast On.
Right-handed shooters may desire some Cast Off with
lefchanded shooters preferting some Cast On. The
terminology isthe same for right or left-handed shooters.
The net effect i to move the cheek piece to llow the
face wo move farher over the stock for beter eye-to-tib
alignment,
7 When properly set, che front and rear sight beads should
line up perfectly each time you shoulder your shorgun.
8 Tighten the stock adjusrment stud screws, Be careful
1n0€ 0 over tighten,
a
9. Replace the check picce anto the studs. If drop at comb
has already been set to your desired height, tighten the
two stock adjustment ser screws securely. IF drop has not
been set, eave the set screws loose and proceed to
“Adjusting Drop at Comb”Figure 20
ADJUSTING DROP AT COMB —
Adjusting the drop ar the comb allows you to align your eve
petfealy withthe plane ofthe rib A correct sight picure for
most shooters should have you looking down the ib with
the botcom of te frone bead resting othe tp of the mi
dle bead, This formsa “figure eight’ or “stacked” configura-
tion. Some ofthe rb will be shoving as you look down the
rib, but no rib should show besween the beads. For shooting
consistency, itis critical that you line up correctly each time
you shoot. The drop measurement is determined by measur-
ing the distance beeween the plane formed by the top of the
1ib and the top of the cheek piece itself (See Figure 19).
‘When you raise the cheek piece you reduce che amount of
drop. A greater amount of drop is obuined by lowering the
cheek pice. To ser drop at comb perform the fllewing:
BEFORE PERFORMING ANY ADJUSTMENTS,
ALWAYS MAKE CERTAIN THERE |S NO SHELL
INTHE CHAMBER,
1 Loosen the two stock adjustment set screws on the sight
side ofthe cheek pice (if they were no et loose afer
setting the cas) The check picce will now move freely,
up and dovin on the stock adjustment studs,
Downward travel ofthe cheek pice is limited by how far
two drop stop screws have been extended. The drop stop
screws ate the ewo small screws on the underside ofthe
check piece (one near each adjustment stud hole in the
bortom of the check piece) They prevent the check pitee
from inadvertently dropping lower than the desired ser
«ing (out of adjustment) even ifthe stock adjusimene set
serews become loose,
2 Turn the drop stop screws up into the cheek piece if noe
already screwed in
3. Slide the check piace tothe desired height (See Figure 20)
and lightly tighten the stock adjustment set crews.
Shor the ganas you woul anche song ng.
The correc sight picture should have the bortom of the
fronc bead resting on the cop of the middle bead.
DROP ADJUSTMENTS AREA MATTER OF
TRIALAND ERROR.
Repeat the adjustment alittle ata time until you obrain
che desired sight picture onthe tb
4 Measure the gap berween the stock and the cheek piece.
5 Remove the cheek piece and crew the drop stop screws
dwn wnt they limit hove far the cheek piece can be
lowered at exactly the drop measurement you dest
6 Tighten the stock adjustment screws (on the tight side of
che cheek piece).
Ieis possible to adjust the rer seting of the cheek piece
slightly higher chan he front setting to obtain a more nega-
tive drop setting,
Barrel Porting
Barrel porting is the pattern of drilled holes in the top of the
barrel. Barrel porting is desired by some shooters forthe ten-
dency 10 reduce barre jump and give a feeling of lower recoil
against the face, Barrel porting requires only an occasional
cleaning as described under “Cleaning Suggestions” later in
this manual
Back-Bored Barrels
‘The BT-100 utilizes a back-bored barrel on all models.
“Back-bore” isa term fora shotgun barrel that has a larger
bore than the minimum specified for that gauge by the
Sporting Arms and Ammunition Manufacturers’ Institute
(SAAMI), Your BT-100's barrel is back-bored but falls with-
in the maximum allowable diameter specifications set by
SAAMI for 12 gauge barrels.Invector-Plus Choke Tube System
BT-100 shotguns feature the Invector Phis choke tube
gystem, The Invector-Pls system isa screw in choke tube
system with interchangeable tubes. You ca confirm this by
reading the inscription on the right side ofthe barrel
The words INVECTOR-PLUS mean your shotgun uses
the Invector Plus choke tube system designed for use in
Browning 12 gauge shorguns with back-bored barrel. The
cx length, combined with special tube tapers, gies the
finest possible patterns for target shooters. Plus, you have
choke switching convenience. Invector Tubes are fly sel
and lead shot compatible. A special “Plus” choke rabe
wrench is provided o remove and tighten these tudes,
CAUTION: INVECTOR-PLUS TUBES ARE FOR USE
IN BROWNING SHOTGUNS WITH BROWNING
BACK-BORED BARRELS ONLY, AND ARE NOT INTER-
CHANGEABLE WITH REGULAR 12 GAUGE INVECTOR
CHOKE TUBES. DO NOT USE INVECTOR PLUS TUBES
IN BARRELS THREADED FOR STANDARD INVECTOR
TUBES. DO NOT USE STANDARD INVECTOR TUBES
IN BARRELS THREADED FOR INVECTOR PLUS
12 Gauge Invector-Plus Tubes
TUBES, FAILURE TO FOLLOW THESE WARNINGS
MAY CAUSE DAMAGE TO YOUR GUN AND CAUSE
INJURY TO YOURSELF AND OTHERS.
DO NOT FIRE THIS SHOTGUN WITHOUT HAVING AN
INVECTOR-PLUS CHOKE TUBE INSTALLED.
PERMANENT DAMAGE MAY RESULT TO THE
THREADS.
DO NOT USE BROWNING INVECTOR-PLUS CHOKE
TUBES IN ANY SHOTGUN BARRELS NOT SUPPLIED
BY BROWNING, ALSO, DO NOT USE ANY OTHER
CHOKING DEVICE IN ANY SHOTGUN BARRELS SUP-
PLIED BY BROWNING. USE ONLY THE APPROPRIATE
GAUGE AND TYPE OF CHOKE TUBES MARKED
INVECTOR-PLUS.
CAUTION: WHENEVER HANDLING ANY SHOTGUN
FOR THE PURPOSE OF REMOVING OR INSTALLING A
CHOKING DEVICE, MAKE ABSOLUTELY CERTAIN
THE GUNIS FULLY UNLOADED, AND THE ACTION IS
BROKEN OPEN! NEVER ATTEMPT TO REMOVE OR
INSTALL A SHOTGUN CHOKING DEVICE ON A
LOADED FIREARM!
Rim Notches Choke Designation Choke Designation
With LEAD With STEEL
Xon side of tube __X-Full Special *
I Full *
I Improved Modified Full!
IL Modified Full!
Ul Improved Cylinder Modified
WI Skeet Improved Cylinder
No notches Gylinder Cylinder
* Do not use with steel shot. Using an over-tight choke constriction with steel shot will result in an ineffective,
“blown” pattern.
1 When more than one choke designation is listed for a given steel shot pattern, use she more open choke listed for
high velocity, larger shor size stel shot loads.Figure 21
TUBE REMOVAL—
1 Fally unload your BT-10
ALWAYS UNLOAD YOUR SHOTGUN — FULLY.
INSPECT THE CHAMBER TO MAKE SURE IT DOES
NOT CONTAIN ANY SHELLS.
2 Open the action using the tp lever as exphined
previously.
3. Use che Invector wrench co loosen the tube turing i
counterclockwise, Finger ewise the tube the rst ofthe
way ourof the bare
TUBE INSTALLATION—
Fully unload your BT-100.
ALWAYS UNLOAD YOUR BT-100— FULLY.
INSPECT THE CHAMBER TO MAKE SURE IT DOES
NOT CONTAIN ANY SHELLS.
2 Open theaction.
3. Before insaling a tube, check the internal choke tube
threedsin the muzzle, as wel asthe threads on the
Invector choke tube to be sure they are clean, Lightly
oil the threads with an il lke Browning Oil
4 Using your fingers, sere the appropriate tube into the
muzaleend of he bate, apered end fst, notched end
outward. When it becomes fingerxight, use the Invector
choke tube wrench co firmly seat the tube
THE INVECTOR CHOKE TUBE SHOULD BE PERIODI-
CALLY CHECKED TO ASSURE THATITIS TIGHT AND
FIRMLY SEATED. BEFORE CHECKING, FOLLOW THE
SAFETY GUIDELINES OUTLINED PREVIOUSLY.
Replacement and additional rubes and wrenches ae avai
able ftom your Browning desler, or by writing tothe
Browning Consumer Department,
One Browning Place, Morgan, Urah 84050-9326.
801-876-2711.
Canadian customers please call or write ro
Browning Canada Sports Lzd/Ltee, S617 Chemin
Se-Frangoss, St. Laurent, Quebec, Canada H4S 1W6.
(514) 333-7261.
INVECTOR TUBE IDENTIFICATION —
To identify individual Invector tubes, refer to the abbrevizted
indications on the side of the tube, or se the identification
notches located on the tp tim of each tube. (See Figare 21)
SELECTING THE CORRECT
INVECTOR CHOKE TUBE —
[Although your BT-100 is designed solely for target use with
lead shor loads the Invector choke system is fully compatible
with Factory stel shot loads s well For your information
only, on the char above we have included steel shor
information in addition tothe lead shor choke/pattern
specifications you will ned. Both kad and ste! designations
have proven necessary for hunters using other Browning
guns with Standard Invector and In Plus tubes because
inany given cube, sel shor gives a different pattern than lead
shor. In fac, even lrger steel shot diameters result in differ
ent patterns than smaller steel shot sizes. Each
designation is inscribed on each choke tube. Remember, you
will only need co refer to the lead shoc designations when
selecting « proper tube for your BT-100, as your new
shotgun is unsuitable for any hunting use.
Cleaning Suggestions
The BT-100 isa targec gun, and as such wil function better
and more reliably over a longer petiod of time if is propedly
maintained and kept ean,
BEFORE PERFORMING ANY CLEANING
PROCEDURES, ALWAYS MAKE CERTAIN THERE IS NO
SHELL IN THE CHAMBER.
You should clean your BT-100 after every dey of shooting,
and mote often if it becomes excessively dirty. A minimum
cleaning includes wiping down the action and ciling key
pats, Most regular maintenance will aso include cleaning the
barrel. Ifyou encounter a function problem (tight action
when closing, etc) be sure to give your gun 2 thorough clan-ing, tose fit solves the problem, before seeking the services
ofa Browning Recommended Service Center or the
Browing Service Facility in Amold, Missouri, or a
competent gunsmith.
Alight cleaning meats oiling and wiping down. I can be
accomplished with the barrel tll attached. A fall cleaning
requires that you remove the barrel and forearm. To clean
your firearm follow the general outline below:
CLEANING PROCEDURES —
BE CERTAIN YOUR GUN'S CHAMBER IS UNLOADED.
ALWAYS WEAR PROTECTIVE SAFETY GLASSES
DURING ALL ASSEMBLY, DISASSEMBLY AND
CLEANING PROCEDURES. KEEP AMMUNITION AWAY
FROM THE CLEANING AREA. DO NOT TEST THE
FUNCTION OF YOUR FIREARM WITH LIVE
AMMUNITION.
1 Remove the barrel and forearm from the receiver as
exphined previously
2. Using a sho:gun cleaning rod, with tip and patch large
enough fora snug fic in the bore, insert the rod anda
lightly ciled patch in the breech end of the barrel and
ran back and forth several times.
Inspect the bore fom both ends for leading and phstic
residue Plastic residue is often lef in the bore from the
shor cups in modern shothells, Leading and plastic
residue will appear as longitudinal srcaks and are wsually
more predominant near the muzzle and just forward of
the chamber. Anormal amount of ether is common
and isnot serous,
IFleading or plastic residue scems excessive you can
remove it by brushing the bore witha brass brush, Soak
thebrush or spray the bore with powder solvent ist.
Scrub until clean. To prevent bristle from breaking off
push the brush fully chrough cach time before pulling i
back through.
IF your shotgun has barrel pors carefully lean them
with a ag soaked in powder solvent You may need to
scrape residues from the holes with something likea
small screwdriver, pipe cleaner or small brush. Iso, be
carefl not to mar the blucing on the barrels outer
surface, or scratch the inside of the bare.
6 Afterall eading and residues have been removed run
clean dry patch through the bore. Follow this with a
final, lightly oiled parch.
7 Wipeall metal surfaces ofthe ceiver, forcarm and bar-
rel with clean rag, Then lightly oil your gun at the
points described in sep 1 under “Assembly Procedures”
Regular ight oiling is extremely important to the dura-
bility and reliable operation of your shorgun.
Remember, the broad, polished, finely fed
surfaces ofthe receiver and forearm mechanisms (¢he
ejector slide, the hinge pi, and on each side ofthe bar
tel receiver walls), must aiways have a thin film of ol
Quality firearm ol like Browning Oil works best for this
purpose, Do not use general purpose water displace-
ment type oils,
8 INSPECT THE BARREL AND CHAMBER TO BE
CERTAIN NO PATCHES HAVE INADVERTENTLY
BEEN LEFT IN THEM. REMOVE ANY THAT
REMAIN.
9) Wipeall wood surfaces with Browning Oil ora quali
furniture polis, but not both
OTHER CLEANING SUGGESTIONS —
Never pour large quantities of oil into the receiver or other
pars, It can drain down tothe wood and soften it — and
cause permanent damage and loosening ofthe stock,
Icis very imporane that the chamber of your shorgun be
cleaned thoroughly and promptly after shooting plastic shor-
shells. DO NOT LEAVE A DISCHARGED (EMPTY)
SHELL IN THE CHAMBER FOR ANY LENGTH OF TIME.
“The chemical composition of many plastic shells contains
moisture which can “sweat” out of the skell and onto the
chamber surface, and possibly cause corrosion and rust
NEVER ATTEMPT TO TAKE YOUR BT-100 APART
FURTHER THAN EXPLAINED IN THIS MANUAL.
‘This is specialized, finely fitted mechanism, You may per-
rmanently mar it by attempting to disassemble the inner
mechanism assemblies If further disassembly for service or
leaning is required, take your gun to a Browning
recommended Service Ceater ora competent gunsmith, or
send cco our Arnold, Missouri Service Faily as cxphined
under “Service or Repair.”Service or Repair
If your firearm should require service or re-
When retuming your firearm for servicing
you must do the following:
pairs, we suggest you first contact a local a. Be sure it is completely unloaded,
recommended Browning Firearms Service b. Package it securely in a cardboard
Center. Contact your Browning sporting container.
goods dealer or call our Service Depart c. Enclose a lewer with your firearm
ment for the address of the Service Center that clearly describes the trouble
nearest you. Otherwise, you may send experienced and the repairs or
your firearm directly to our own Service alterations desired
Department. For technical questions about d. If convenient, send a copy of the
your firearm or service call our Service letter to us separately
Department e. Never return ammunition with your
and most
firearm, It is
commerce re;
Browning Service Department
One Browning Place
Arnold, Missouri 63010-9406
Phone: 1-800-322-4626
gainst posta
yulations.
If you have any questions about this
manual or about any other Browning
products, call or write our Consumer
Information Department:
Browning Consumer Information
One Browning Place
Morgan, Utah 84050-9326
Phone: (801) 876-2711
Canadian Customers call or write:
Browning Canada Sports Ltd,/Ltee,
5617 Chemin St-Francois
St-Laurent, Quebec H4S 1W6
Phone: (514) 333-7261