Professional Documents
Culture Documents
DATE: 09/27/18
TO: John Pettit
LS3P
9/27/2018 10 10/7/2018
COMMENTS:
SUBMITTAL REVIEW
✔
APPROVED REVISE REJECTED
NOTES:
SEE COMMENTS THROUGHOUT. WE REFERENCED EMAILS
RECEIVED NOTING WHAT ITEMS WERE APPROVED OR NOT
APPROVED.
ALL ITEMS W/ RED CHECK ARE ACCEPTED. ALL ITEM MARKED REJECTED MUST BE RESUBMITTED
AND APPROVED TO BE USED ON THE PROJECT. VERIFY ALL DIMENSIONS AND UTILITES PRIOR TO
INSTALLATION.
CAMACHO'S REVIEW OF THIS SUBMITTAL IS FOR THE VERIFICATION OF CONFORMANCE WITH THE DESIGN INTENT
EXPRESSED IN THE CONTRACT DOCUMENTS. COMMENTS MADE HEREIN ARE NOT TO BE CONSTUED AS INDICATING
APPROVAL OF AN ITEM OR ASSEBMLY.
THE CONTRACTOR REMAINS RESPONSIBLE FOR CHECKING DEVIATIONS BETWEEN THIS SUBMITTAL AND DIFFERING
INFORMATION OR CONDITIONS IN THE CONTRACT DOCUMENTS AND FIELD CONDITIONS; FOR DETERMINING AND
SUBSTANTIATING THE ACCURACY AND COMPLETENESS OF OTHER DETAILS SUCH AS DIMENSIONS, UTILITY
REQUIREMENTS, QUANTITIES, CONSTRUCTION METHODS, TECHNIQUES, SCHEDULES, SEQUENCES, FABRICATION
PROCESSES, ERRORS AND OMISSION. THE CONTRACTOR IS ALSO RESPONSIBLE FOR COORDINATION OF THE WORK OF
THE OTHER TRADES, SAFETY PRECAUTIONS AND FOR PERFORMING WORK IN A SAFE AND SATISFACTORY MANNER.
CAMACHO STILL UNCLEAR WHETHER #49/51/52/53 SHOULD BE
DELFIELD OR CONTINENTAL? WE HAVE AN EMAIL DATED
NOVEMBER 07, 2018 SAYING THESE ITEMS SHOULD BE
DELFILD. WE HAVE MARKED THIS SUBMITTAL TO BE DELFIELD.
CAMACHO NOTE:
THIS LIST DOES NOT APPLY TO CE WILLIAMS SUBMITTAL.
CAMACHO NOTE:
THIS LIST DOES NOT APPLY TO CE WILLIAMS SUBMITTAL.
CAMACHO NOTE:
THIS LIST DOES NOT APPLY TO CE WILLIAMS SUBMITTAL.
Pennsylvania Office North Carolina Office Texas (remote PM) Office
2207 Old Philadelphia Pike 6801-E Northpark Blvd. Tomball, TX
Lancaster, PA 17602 Charlotte, NC 28216
∙BLAST
∙ ∙ ∙ ∙CHILLER/SHOCK
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙FREEZER
∙ ∙ ∙ ∙ ∙ ∙‐ ∙AMERICAN
∙ ∙ ∙ ∙ ∙ ∙ ∙ PANEL
∙ ∙ ∙ ∙ ∙CORPORATION
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙AP3BCF30‐1
∙∙∙∙∙∙∙∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙42∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
(ITEM 18)
∙TRANSPORT
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙UTILITY
∙ ∙ ∙ ∙ ∙ CART
∙ ∙ ∙ ∙‐ ∙LAKESIDE
∙ ∙ ∙ ∙ ∙ ∙ MANUFACTURING
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙7120
∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙45∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ ∙19)
∙SPARE
∙ ∙ ∙ ∙NO.
∙ ∙ ∙‐ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙48∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙20)
∙MEAT
∙ ∙ ∙ ∙PREP
∙ ∙ ∙ TABLE
∙ ∙ ∙ ∙ ∙‐ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙49∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ 21)
∙WALL
∙ ∙ ∙ ∙/ ∙SPLASH
∙ ∙ ∙ ∙ ∙MOUNT
∙ ∙ ∙ ∙ ∙ ∙FAUCET
∙ ∙ ∙ ∙ ∙ ‐∙T&S
∙ ∙ ∙BRASS
∙ ∙ ∙ ∙ ∙B‐0231‐CR‐KIT
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙50∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ ∙21.1)
∙DRAIN,
∙ ∙ ∙ ∙ ∙LEVER
∙ ∙ ∙ ∙/∙TWIST
∙ ∙ ∙ ∙ ∙WASTE
∙ ∙ ∙ ∙ ∙‐ ∙T&S
∙ ∙ ∙BRASS
∙ ∙ ∙ ∙ B‐3952‐01
∙ ∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙53∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ ∙21.2)
∙PREP
∙ ∙ ∙ TABLE
∙ ∙ ∙ ∙ ∙‐ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙56∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ 22)
∙WALL
∙ ∙ ∙ ∙/ ∙SPLASH
∙ ∙ ∙ ∙ ∙MOUNT
∙ ∙ ∙ ∙ ∙ ∙FAUCET
∙ ∙ ∙ ∙ ∙ ‐∙T&S
∙ ∙ ∙BRASS
∙ ∙ ∙ ∙ ∙B‐0231‐CR‐KIT
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙57∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ ∙22.1)
∙DRAIN,
∙ ∙ ∙ ∙ ∙LEVER
∙ ∙ ∙ ∙/∙TWIST
∙ ∙ ∙ ∙ ∙WASTE
∙ ∙ ∙ ∙ ∙‐ ∙T&S
∙ ∙ ∙BRASS
∙ ∙ ∙ ∙ B‐3952‐01
∙ ∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙58∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ ∙22.2)
∙MEAT
∙ ∙ ∙ ∙SLICER
∙ ∙ ∙ ∙ ∙‐ HOBART
∙ ∙ ∙ ∙ ∙ ∙ HS7N‐1
∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙59∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙23)
∙SLICER
∙ ∙ ∙ ∙ TABLE
∙ ∙ ∙ ∙ ∙‐ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙64∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ 24)
∙HAND
∙ ∙ ∙ ∙SINK
∙ ∙ ∙ ‐∙ EAGLE
∙ ∙ ∙ ∙ ∙GROUP
∙ ∙ ∙ ∙ ∙HSAP-14-FW
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙65∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙25)
∙CONVECTION
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙OVEN,
∙ ∙ ∙ ∙ ELECTRIC
∙ ∙ ∙ ∙ ∙ ∙ ∙‐ ∙GARLAND/US
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙RANGE
∙ ∙ ∙ ∙ ∙MCO‐ED‐20‐S
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙66∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ 26)
∙TILTING
∙ ∙ ∙ ∙ ∙SKILLET
∙ ∙ ∙ ∙ ∙ BRAISING
∙ ∙ ∙ ∙ ∙ ∙ ∙PAN,
∙ ∙ ∙ ELECTRIC
∙ ∙ ∙ ∙ ∙ ∙ ∙‐ ∙CLEVELAND
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙RANGE
∙ ∙ ∙ ∙ ∙SEL40T1
∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙69∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ ∙27)
∙PRE‐RINSE
∙ ∙ ∙ ∙ ∙ ∙ ∙FAUCET
∙ ∙ ∙ ∙ ∙ ASSEMBLY
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙‐ T&S
∙ ∙ ∙ BRASS
∙ ∙ ∙ ∙ ∙B‐0160
∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙72∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ 27A)
∙FLOOR
∙ ∙ ∙ ∙ TROUGH
∙ ∙ ∙ ∙ ∙ ∙ ∙‐ EAGLE
∙ ∙ ∙ ∙ ∙GROUP
∙ ∙ ∙ ∙ ∙ FT‐2436‐FG
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙75∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ 28)
∙HOTPLATE,
∙ ∙ ∙ ∙ ∙ ∙ ∙ COUNTERTOP,
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ELECTRIC
∙ ∙ ∙ ∙ ∙ ∙ ‐∙ GARLAND/US
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ RANGE
∙ ∙ ∙ ∙ ∙ E24‐12H
∙ ∙ ∙ ∙ ∙ ∙ (ITEM
∙ ∙ ∙ ∙ ∙29)
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙78∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙SPARE
∙ ∙ ∙ ∙NO.
∙ ∙ ∙‐ ∙(ITEM
∙ ∙ ∙ ∙30)
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙83∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙SPARE
∙ ∙ ∙ ∙NO.
∙ ∙ ∙‐ ∙(ITEM
∙ ∙ ∙ ∙31)
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙84∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙UTILITY
∙ ∙ ∙ ∙ ∙DISTRIBUTION
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙SYSTEM
∙ ∙ ∙ ∙ ∙ ‐∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙85∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙32)
∙EXHAUST
∙ ∙ ∙ ∙ ∙ ∙HOOD
∙ ∙ ∙ ∙ ∙‐ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙86∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ 33)
∙FIRE
∙ ∙ ∙SUPPRESSION
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ SYSTEM
∙ ∙ ∙ ∙ ∙ ∙‐ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙87∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ ∙33.1)
∙WORK
∙ ∙ ∙ ∙ TABLE,
∙ ∙ ∙ ∙ ∙STAINLESS
∙ ∙ ∙ ∙ ∙ ∙ ∙ STEEL
∙ ∙ ∙ ∙ TOP
∙ ∙ ∙ ‐∙ EAGLE
∙ ∙ ∙ ∙ ∙GROUP
∙ ∙ ∙ ∙ ∙T3060SE
∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙88∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ 34)
∙EXHAUST
∙ ∙ ∙ ∙ ∙ ∙HOOD
∙ ∙ ∙ ∙ ∙‐ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙93∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ 35)
∙FIRE
∙ ∙ ∙SUPPRESSION
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ SYSTEM
∙ ∙ ∙ ∙ ∙ ∙‐ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙94∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ ∙35.1)
∙UTILITY
∙ ∙ ∙ ∙ ∙DISTRIBUTION
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙SYSTEM
∙ ∙ ∙ ∙ ∙ ‐∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙95∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙36)
FOOD PROCESSOR ‐ ROBOT COUPE R2N ULTRA (ITEM 37) ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ 96
∙VEG.
∙ ∙ ∙PREP
∙ ∙ ∙ ∙TABLE
∙ ∙ ∙ ∙ WITH
∙ ∙ ∙ ∙ SINK
∙ ∙ ∙ ∙‐ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙99∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙
∙ ∙ ∙ ∙ 38)
∙WALL
∙ ∙ ∙ ∙/ ∙SPLASH
∙ ∙ ∙ ∙ ∙MOUNT
∙ ∙ ∙ ∙ ∙ ∙FAUCET
∙ ∙ ∙ ∙ ∙ ‐∙T&S
∙ ∙ ∙BRASS
∙ ∙ ∙ ∙ ∙B‐0231‐CR‐KIT
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙100
∙ ∙ ∙ ∙ ∙38.1) ∙∙∙∙∙∙∙∙∙∙∙
∙DRAIN,
∙ ∙ ∙ ∙ ∙LEVER
∙ ∙ ∙ ∙/∙TWIST
∙ ∙ ∙ ∙ ∙WASTE
∙ ∙ ∙ ∙ ∙‐ ∙T&S
∙ ∙ ∙BRASS
∙ ∙ ∙ ∙ B‐3952‐01
∙ ∙ ∙ ∙ ∙ ∙ ∙ (ITEM
∙ ∙ ∙ ∙ ∙38.2)
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 101
∙COMBI
∙ ∙ ∙ ∙ OVEN,
∙ ∙ ∙ ∙ ∙ ELECTRIC
∙ ∙ ∙ ∙ ∙ ∙ ∙‐ CONVOTHERM
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙C4∙ ∙ET∙ ∙6.20ES
∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙102
∙ ∙ ∙ ∙ ∙39) ∙∙∙∙∙∙∙∙∙∙∙
∙WATER
∙ ∙ ∙ ∙ ∙FILTRATION
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙SYSTEM
∙ ∙ ∙ ∙ ∙ ‐∙ OPTIPURE
∙ ∙ ∙ ∙ ∙ ∙ ∙ QT1+CR
∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙107
∙ ∙ ∙ ∙ 39A) ∙∙∙∙∙∙∙∙∙∙∙
∙SPARE
∙ ∙ ∙ ∙NO.
∙ ∙ ∙‐ ∙(ITEM
∙ ∙ ∙ ∙40)
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙110 ∙∙∙∙∙∙∙∙∙∙∙
COMBI OVEN, ELECTRIC ‐ CONVOTHERM C4 ET 6.20ES (ITEM
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 41) 111
∙WATER
∙ ∙ ∙ ∙ ∙FILTRATION
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙SYSTEM
∙ ∙ ∙ ∙ ∙ ‐∙ OPTIPURE
∙ ∙ ∙ ∙ ∙ ∙ ∙ QT1+CR
∙ ∙ ∙ ∙ ∙ ∙(ITEM
∙ ∙ ∙ ∙ 41A)
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙112
∙∙∙∙∙∙∙∙∙∙∙
CONVECTION OVEN, ELECTRIC ‐ GARLAND/US RANGE MCO‐ED‐20‐S
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ (ITEM 42) 113
CONVECTION
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙STEAMER,
∙ ∙ ∙ ∙ ∙ ∙ ∙ELECTRIC,
∙ ∙ ∙ ∙ ∙ ∙ BOILERLESS
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ‐∙ CLEVELAND
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ RANGE
∙ ∙ ∙ ∙ ∙ (2)
∙ ∙ 22CET66.1
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙114
∙∙∙∙∙∙∙∙∙∙∙
(ITEM 43)
∙ ∙ ∙ ∙ ∙ ∙FILTRATION
WATER ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙SYSTEM
∙ ∙ ∙ ∙ ∙ ‐∙ OPTIPURE
∙ ∙ ∙ ∙ ∙ ∙ ∙ QT1+CR
∙ ∙ ∙ ∙ ∙ ∙(ITEM
∙ ∙ ∙ ∙ 43A)
∙∙∙∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙117
∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙ TABLE,
WORK ∙ ∙ ∙ ∙ ∙STAINLESS
∙ ∙ ∙ ∙ ∙ ∙ ∙ STEEL
∙ ∙ ∙ ∙ TOP
∙ ∙ ∙ ‐∙ EAGLE
∙ ∙ ∙ ∙ ∙GROUP
∙ ∙ ∙ ∙ ∙T3072SE‐BS
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙118
∙ ∙ ∙ ∙ 44) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ SHELVING
WIRE ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙‐ METRO
∙ ∙ ∙ ∙ ∙ ∙2448NK3
∙ ∙ ∙ ∙ ∙ ∙ (ITEM
∙ ∙ ∙ ∙ 45)
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 121
∙ ∙ ∙ ∙RACK
POT ∙ ∙ ∙ ∙‐ EAGLE
∙ ∙ ∙ ∙ ∙GROUP
∙ ∙ ∙ ∙ ∙ WM96PR
∙ ∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙124
∙ ∙ ∙ ∙ 46) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙WASHING
POT ∙ ∙ ∙ ∙ ∙ ∙ ∙SINK∙ ∙ ∙ ‐∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙129
∙ ∙ ∙ ∙47) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙/ ∙SPLASH
WALL ∙ ∙ ∙ ∙ ∙MOUNT
∙ ∙ ∙ ∙ ∙ ∙FAUCET
∙ ∙ ∙ ∙ ∙ ‐∙T&S
∙ ∙ ∙BRASS
∙ ∙ ∙ ∙ ∙B‐0231‐CR‐KIT
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙130
∙ ∙ ∙ ∙ ∙47.1) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙ ∙LEVER
DRAIN, ∙ ∙ ∙ ∙/∙TWIST
∙ ∙ ∙ ∙ ∙WASTE
∙ ∙ ∙ ∙ ∙‐ ∙T&S
∙ ∙ ∙BRASS
∙ ∙ ∙ ∙ B‐3952‐01
∙ ∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙131
∙ ∙ ∙ ∙ ∙47.2) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙CUBER
ICE ∙ ∙ ∙ ∙ ∙‐ ∙SCOTSMAN
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙C0522SA‐1
∙ ∙ ∙ ∙ ∙ ∙ ∙ (ITEM
∙ ∙ ∙ ∙ ∙48)
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 132
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ HEATED
PASS‐THRU ∙ ∙ ∙ ∙ ∙ ∙CABINET
∙ ∙ ∙ ∙ ∙ ∙‐ ∙DELFIELD
∙ ∙ ∙ ∙ ∙ ∙ CSHPT1‐S
∙ ∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙139
∙ ∙ ∙ ∙ 49) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ HEATED
PASS‐THRU ∙ ∙ ∙ ∙ ∙ ∙CABINET
∙ ∙ ∙ ∙ ∙ ∙‐ ∙CONTINENTAL
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ REFRIGERATOR
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙DL1WE‐SS‐PT
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙(ITEM
∙ ∙ ∙ ∙ 49)
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 142
∙ ∙ ∙ ∙ ∙NO.
SPARE ∙ ∙ ∙‐ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙145
∙ ∙ ∙ ∙ 50) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ REFRIGERATOR
PASS‐THRU ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙‐ ∙CONTINENTAL
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ REFRIGERATOR
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙DL2RE‐SS‐PT
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙146
∙ ∙ ∙ ∙ ∙51) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ REFRIGERATOR
PASS‐THRU ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙‐ ∙CONTINENTAL
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ REFRIGERATOR
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙DL2RE‐SS‐PT
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙149
∙ ∙ ∙ ∙ ∙52) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ HEATED
PASS‐THRU ∙ ∙ ∙ ∙ ∙ ∙CABINET
∙ ∙ ∙ ∙ ∙ ∙‐ ∙CONTINENTAL
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ REFRIGERATOR
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙DL1WE‐SS‐PT
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙150
∙ ∙ ∙ ∙ 53) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙&∙ TRAY
FLATWARE ∙ ∙ ∙ ∙ CART
∙ ∙ ∙ ∙‐∙DELFIELD
∙ ∙ ∙ ∙ ∙ ∙ UTS‐1SS
∙ ∙ ∙ ∙ ∙ ∙(ITEM
∙ ∙ ∙ ∙ 54)
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 151
∙ ∙ ∙ ∙ COOLER
MILK ∙ ∙ ∙ ∙ ∙ ∙‐ ∙BEVERAGE
∙ ∙ ∙ ∙ ∙ ∙ ∙ AIR
∙ ∙ ∙ST34N‐S
∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙154
∙ ∙ ∙ ∙55) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙FOOD
HOT ∙ ∙ ∙ ∙COUNTER
∙ ∙ ∙ ∙ ∙ ∙ ∙‐ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ (ITEM
∙ ∙ ∙ ∙ ∙56)
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 157
∙ ∙ ∙ ∙ ∙FOOD
COLD ∙ ∙ ∙ ∙COUNTER
∙ ∙ ∙ ∙ ∙ ∙ ∙‐ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙158
∙ ∙ ∙ ∙ 57) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙TOP
FLAT ∙ ∙ ∙ COUNTER
∙ ∙ ∙ ∙ ∙ ∙ ∙‐ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙159
∙ ∙ ∙ ∙ 58) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙ ∙ ∙COUNTER
CASHIER ∙ ∙ ∙ ∙ ∙ ∙ ‐∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙160
∙ ∙ ∙ ∙59) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙NO.
SPARE ∙ ∙ ∙‐ ∙(ITEM
∙ ∙ ∙ ∙ 60)
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 161
∙ ∙ ∙ ∙ ∙ ∙ ∙COUNTER
CASHIER ∙ ∙ ∙ ∙ ∙ ∙ ‐∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙162
∙ ∙ ∙ ∙61) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙TOP
FLAT ∙ ∙ ∙ COUNTER
∙ ∙ ∙ ∙ ∙ ∙ ∙‐ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ (ITEM
∙ ∙ ∙ ∙ 62)
∙∙∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙163
∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙FOOD
COLD ∙ ∙ ∙ ∙COUNTER
∙ ∙ ∙ ∙ ∙ ∙ ∙‐ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙164
∙ ∙ ∙ ∙ 63) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙FOOD
HOT ∙ ∙ ∙ ∙COUNTER
∙ ∙ ∙ ∙ ∙ ∙ ∙‐ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙165
∙ ∙ ∙ ∙ ∙64) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ COOLER
MILK ∙ ∙ ∙ ∙ ∙ ∙‐ ∙BEVERAGE
∙ ∙ ∙ ∙ ∙ ∙ ∙ AIR
∙ ∙ ∙ST34N‐S
∙ ∙ ∙ ∙ ∙ ∙(ITEM
∙ ∙ ∙ ∙65)
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 166
∙ ∙ ∙ ∙ ∙ ∙ ∙COUNTER
CASHIER ∙ ∙ ∙ ∙ ∙ ∙ ‐∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙167
∙ ∙ ∙ ∙66) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙TOP
FLAT ∙ ∙ ∙ COUNTER
∙ ∙ ∙ ∙ ∙ ∙ ∙‐ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙168
∙ ∙ ∙ ∙ 67) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙FOOD
COLD ∙ ∙ ∙ ∙COUNTER
∙ ∙ ∙ ∙ ∙ ∙ ∙‐ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙169
∙ ∙ ∙ ∙ 68) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙FOOD
HOT ∙ ∙ ∙ ∙COUNTER
∙ ∙ ∙ ∙ ∙ ∙ ∙‐ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙170
∙ ∙ ∙ ∙ ∙69) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ COOLER
MILK ∙ ∙ ∙ ∙ ∙ ∙‐ ∙BEVERAGE
∙ ∙ ∙ ∙ ∙ ∙ ∙ AIR
∙ ∙ ∙ST34N‐S
∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙171
∙ ∙ ∙ ∙70) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙NO.
SPARE ∙ ∙ ∙‐ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙172
∙ ∙ ∙ ∙ 71) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙ ∙DISH
SOILED ∙ ∙ ∙ TABLE
∙ ∙ ∙ ∙ ∙‐ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙(ITEM
∙ ∙ ∙ ∙ 72)
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 173
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙FAUCET
PRE‐RINSE ∙ ∙ ∙ ∙ ∙ ASSEMBLY
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙‐ T&S
∙ ∙ ∙ BRASS
∙ ∙ ∙ ∙ ∙B‐0133‐B
∙ ∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙174
∙ ∙ ∙ ∙ ∙73) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙ ∙ ∙ ‐∙ SALVAJOR
DISPOSER ∙ ∙ ∙ ∙ ∙ ∙ ∙ 300‐SA‐6‐ARSS‐LD
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙179
∙ ∙ ∙ ∙ 74‐75) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ CONVEYOR
DISHWASHER, ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙TYPE
∙ ∙ ∙ ∙‐ HOBART
∙ ∙ ∙ ∙ ∙ ∙ CLPS66EN‐BAS+BUILDUP
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙182
∙ ∙ ∙ ∙ 76) ∙∙∙∙∙∙∙∙∙∙∙
‐∙ HOBART
∙ ∙ ∙ ∙ ∙ ∙ BDERLET‐STDDOM
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙199
∙ ∙ ∙ ∙ 77) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ DUCT
SS ∙ ∙ ∙ ∙ ‐∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ ∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙200
∙ ∙ ∙ ∙ 78) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙ DISH
CLEAN ∙ ∙ ∙ ∙TABLE
∙ ∙ ∙ ∙ ‐∙CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ CUSTOM
∙ ∙ ∙ ∙ ∙ ∙ (ITEM
∙ ∙ ∙ ∙ ∙79)
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 201
∙ ∙ ∙ ∙ ∙NO.
SPARE ∙ ∙ ∙‐ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙202
∙ ∙ ∙ ∙ 80) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ DRYING
TRAY ∙ ∙ ∙ ∙ ∙ ∙/ ∙STORAGE
∙ ∙ ∙ ∙ ∙ ∙ RACK
∙ ∙ ∙ ∙‐∙CHANNEL
∙ ∙ ∙ ∙ ∙ ∙ ∙MANUFACTURING
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ATDR‐3
∙ ∙ ∙ ∙ ∙ (ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙203
∙ ∙ ∙ ∙ 81) ∙∙∙∙∙∙∙∙∙∙∙
∙ ∙ ∙ ∙ ∙REEL
HOSE ∙ ∙ ∙ ‐∙T&S
∙ ∙ ∙BRASS
∙ ∙ ∙ ∙ ∙B‐7232‐01
∙ ∙ ∙ ∙ ∙ ∙ ∙(ITEM ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙205
∙ ∙ ∙ ∙ 82) ∙∙∙∙∙∙∙∙∙∙∙
Mars Air Systems N248‐1UA‐PW Item #1
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
1 115 60 1 1/2
N2
(Sanitation Customer Entrance) Mechanical Data AMCA Certified Lab Data
Series 2
Max Core
Nozzle Length Length Depth Height Motor Weight Avg Velocity Volume Uniformity Power Rating
Model Number Velocity at
(in) (in) (in) (in) (hp) (lbs) (fpm) (cfm) (%) (watts)
Nozzle (fpm)
N236-1U*-OB 36 36 13 11 1/2 60 5960 2206 1379 84 500
N242-1U*-OB 42 42 13 11 1/2 65 4865 1945 1418 87 510
N248-1U*-OB 48 48 13 11 1/2 70 4247 1730 1442 85 550
N260-2U*-OB 60 60 13 11 Two 1/2 90 6737 2592 2700 93 940
N272-2U*-OB 72 72 13 11 Two 1/2 120 5960 2206 2758 84 1000
N284-2U*-OB 84 84 13 11 Two 1/2 125 4865 1945 2836 87 1020
N296-2U*-OB 96 96 13 11 Two 1/2 135 4247 1730 2884 85 1100
N2108-3U*-OB 108 108 13 11 Three 1/2 175 5960 2206 4137 84 1500
N2120-3U*-OB 120 120 13 11 Three 1/2 185 4660 2084 4341 92 1570
N2144-3U*-OB 144 144 13 11 Three 1/2 200 4247 1730 4326 85 1650
* - Use corresponding letters in "Electrical Data" columns to complete the model numbers. Note: ETL Sanitation models available in 60 Hz only.
1. The AMCA Certified Ratings Seal applies to airflow rate, average outlet velocity, outlet velocity uniformity, velocity projection and power rating at free delivery only.
2. Rated data shown are only for base (unheated) units, as shown.
Features:
1/2 HP Continuous Duty Motors Unit Voltage
Sleek self‐contained one piece heavy gauge corrosion proof paint lock metal design (Voltage Code)
Electrical Data
ETL Certified to conform to ANSI/NSF 37 Standards for Customer Entrances up to 7’ (FLA)
115v 208-230v/1Ø 208-230v/3Ø 460v 575v/3Ø
ETL Certified to conform to UL 507 (US) and CSA 22.2 (Canada) Standards
(A) (D) (G) (H) (I)
AMCA Certified to AMCA 211 Standards
Top and wall mounting holes provided (7/16”) N236-1U*-OB 5.1 2.5 1.8/1.6 0.8 0.7
N242-1U*-OB 5.1 2.5 1.8/1.6 0.8 0.7
Cabinet has sufficient strength for fastening to wall on both ends without intermediate N248-1U*-OB 5.1 2.5 1.8/1.6 0.8 0.7
support. N260-2U*-OB 10.2 5.0 3.6/3.2 1.6 1.4
Adjustable air directional vanes with 40° sweep front to back N272-2U*-OB 10.2 5.0 3.6/3.2 1.6 1.4
Standard color is Obsidian Black N284-2U*-OB 10.2 5.0 3.6/3.2 1.6 1.4
N296-2U*-OB 10.2 5.0 3.6/3.2 1.6 1.4
Rust preventative electrostatic polyurethane powder coating N2108-3U*-OB 15.3 7.5 5.4/4.8 2.4 2.1
5 year parts warranty N2120-3U*-OB 15.3 7.5 5.4/4.8 2.4 2.1
Freight Included (FOB Continental USA) N2144-3U*-OB 15.3 7.5 5.4/4.8 2.4 2.1
* - Use corresponding letters in"Electrical Data" columns to complete the model numbers.
Proudly Made in the USA
Note: For Ampacity Multiply FLA X 1.25
Options and Accessories: (see Accessories Brochure)
Motor Control Panels EXAMPLE
Wall and Overhead Bracket N2 72 2 U D TS
Custom colors and finishes (304SS, 316SS)
S
e
r
i
e
s
:
N
2
L
E
N
G
T
H
O
F
U
N
I
T
Sound Levels: (measured at 10’ in an open field)
# OF MOTORS
1 Motor Unit = 66 dBA, 2 Motor Unit = 68 dBA, 3 Motor Unit = 71 dBA & 4 Motor Unit = 73 dBA
U
=
U
N
H
E
A
T
E
D
V
O
L
T
A
G
E
C
O
D
E
Projection Velocity
C
O
L
O
R
Distance from Avg. Core MARS Air Systems, LLC certifies that the Air Curtains shown
Model on this data sheet are licensed to bear the AMCA seal.
nozzle (in) Velocity (FPM) The rating shown are based on tests and procedures
performed in accordance with AMCA Publication 211 and
36" 1522 comply with the requirements of the AMCA Certified
Ratings Program.
N236-1U*-OB 48" 1312
60" 1158
Note: Model N260-2 is not AMCA Certified.
NOTE: MARS AIR SYSTEMS, LLC reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or
replacements for previously purchased equipment.
Item #_ ______________________________________________
Job_ ________________________________________________
Wire Shelving
SUPER ERECTA SHELF®
WIRE Shelving
• Unique Design: The open wire design of these shelves
minimizes dust accumulation and allows free circulation
of air, greater visibility of stored items and greater light
penetration.
• Durable Construction: Super Erecta shelves and posts
are constructed of heavy-gauge carbon steel or Type
304 stainless steel.
• Choice of Finishes: Super Erecta Brite™ and chrome-
plated for dry storage; Metroseal 3™ with Microban®
antimicrobial product protection and stainless steel
for corrosive environments; and attractive epoxy color
options for merchandising applications.
• Versatile: Super Erecta Shelf ® wire shelving can adapt
to your changing needs. By using various accessories,
hundreds of shelving configurations become possible.
• Fast, Secure Assembly: SiteSelect™ Posts have a
double groove visual guide feature every 8" (203mm),
circular grooves at 1" (25mm) increments, and are
numbered at 2" (50mm) intervals. A patented, tapered
split sleeve snaps together around each post. Tapered
openings in the shelf corners slide over the tapered split
sleeves providing a positive lock. Shelf is assembled in
minutes without the use of any special tools.
• Adjustability: Shelves can be adjusted at 1" (25mm)
intervals along the entire length of the post.
• Shelf Ribs: Run front to back, allowing you to slide items
on and off shelves smoothly.
• Shelf Accessibility: Shelves can be loaded/unloaded
easily from all sides This open construction allows
maximum use of storage cube.
• Adjustable Feet: Bolt levelers compensate for surface
irregularities.
Note: Stainless stationary posts are equipped with stainless
steel leveling feet. 10.01
*Microban® and the Microban® symbol are registered trademarks of the Microban Products Company, Huntersville, NC.
Wire Shelves
• Metroseal 3: Metro’s proprietary epoxy coating contains Microban®
antimicrobial product protection. Microban antimicrobial protects the epoxy
coating from bacteria, mold, mildew, and fungus that cause odors, stains,
and product degradation.
• See spec sheet 10.14 for epoxy color options.
• Plastic split sleeves are included with each shelf
Replacements are available: Cat. No. 9985 (bag of 4)
• Aluminum split sleeves are recommended for abusive mobile applications
and autoclave applications.
Cat. No. 9986Z (bag of 4 with zinc C-rings)
Cat. No. 9986S (bag of 4 with stainless steel C-rings)
• Load capacity (evenly distributed) per shelf
Depths: 14" to 24" (355 to 610mm)
800 Ibs. (363kg) for lengths of 18" to 48" (457 to 1219mm)
600 Ibs. (272kg) for lengths of 54" (1370mm) or longer
• Load capacity (evenly distributed) per unit.
Split Sleeve Stationary shelving units have a maximum load capacity (evenly distributed)
of 2,000 Ibs. (907kg)
Mobile units have a maximum capacity of three times the caster load
rating up to but not exceeding 1,000 Ibs. (453kg) total. Consult the Metro
catalog for caster load ratings
Aluminum • SUPER ERECTA SHELF meets Government Specifications MIL-S-40144E.
Split Sleeve
Approx.
Model No. Model No. Model No. Model No. Nominal Width/Length Pkd. Wt.
Super Erecta Brite Chrome Metroseal 3 with Microban
®
Stainless (in.) (mm) (lbs.) (kg)
1424BR 1424NC 1424NK3 1424NS 14x24 355x610 6 2.7
1430 BR 1430NC 1430NK3 1430NS 14x30 355x760 7 3.2
1436BR 1436NC 1436NK3 1436NS 14x36 355x914 8 3.6
1442BR 1442NC 1442NK3 1442NS 14x42 355x1066 91/2 4.3
1448BR 1448NC 1448NK3 1448NS 14x48 355x1219 101/2 4.7
1460BR 1460NC 1460NK3 1460NS 14x60 355x1524 14 6.3
1472BR 1472NC 1472NK3 1472NS 14x72 355x1829 17 7.7
1824BR 1824NC 1824NK3 1824NS 18x24 457x610 7 3.2
1830BR 1830NC 1830NK3 1830NS 18x30 457x760 8 3.6
1836BR 1836NC 1836NK3 1836NS 18x36 457x914 91/2 4.3
1842BR 1842NC 1842NK3 1842NS 18x42 457x1066 11 5.0
1848BR 1848NC 1848NK3 1848NS 18x48 457x1219 12 5.4
1854BR 1854NC 1854NK3 1854NS 18x54 457x1370 141/2 6.6
1860BR 1860NC 1860NK3 1860NS 18x60 457x1524 17 7.7
1872BR 1872NC 1872NK3 1872NS 18x72 457x1829 20 9.1
2124BR 2124NC 2124NK3 2124NS 21x24 530x610 8 3.6
2130BR 2130NC 2130NK3 2130NS 21x30 530x760 9 4.1
2136BR 2136NC 2136NK3 2136NS 21x36 530x914 11 5.0
2142BR 2142NC 2142NK3 2142NS 21x42 530x1066 12 5.4
2148BR 2148NC 2148NK3 2148NS 21x48 530x1219 14 6.4
2154BR 2154NC 2154NK3 2154NS 21x54 530x1370 16 7.3
2160BR 2160NC 2160NK3 2160NS 21x60 530x1524 18 8.2
2172BR 2172NC 2172NK3 2172NS 21x72 530x1829 24 10.9
2424BR 2424NC 2424NK3 2424NS 24x24 610x610 9 4.1
2430BR 2430NC 2430NK3 2430NS 24x30 610x760 11 5.0
2436BR 2436NC 2436NK3 2436NS 24x36 610x914 13 5.9
2442BR 2442NC 2442NK3 2442NS 24x42 610x1066 15 6.8
2448BR 2448NC 2448NK3 2448NS 24x48 610x1219 16 7.3
2454BR 2454NC 2454NK3 2454NS 24x54 610x1370 19 8.6
2460BR 2460NC 2460NK3 2460NS 24x60 610x1524 21 9.5
2472BR 2472NC 2472NK3 2472NS 24x72 610x1829 26 11.8
Note: 14” (355mm) deep units.
Free-standing units: Foot plates should be used and secured to the floor.
Mobile units: maximum allowable post height is 54” (1370mm).
SiteSelect™ Posts
Stationary Posts
Stationary posts are equipped with a leveling bolt to account for uneven floors.
• Height includes leveling bolt (completely tightened) and post cap Leveling
bolt can be adjusted 1/2" (13mm).
• Foot plates may be ordered separately and installed in place of leveling foot.
• Replacement leveling bolts SiteSelect Posts
Zinc Cat. No. RPF04-004 Stainless Steel Cat. No. RPF04-004C feature double
grooves every
• Replacement post cap for standard posts 8" (203mm) to
Black Cat. No. RPC06-035 aid assembly.
Model No. Approx.
Model No. Metroseal 3 Model No. Height Pkd. Wt.
Chrome with Microban Stainless Steel (in.) (mm) (lbs.) (kg)
7P 73/8 187 1/2 0.3
13P 13PK3 13PS 143/8 365 1 0.5
27P 27PS 283/8 720 13/4 0.75
33P 33PK3 33PS 343/8 873 2 0.9
54P 54PK3 54PS 547/16 1382 3 1.4
63P 63PK3 63PS 627/16 1585 31/2 1.6
74P 74PK3 74PS 74 /2 1892
1
4 1.8
86P 86PK3 86PS 861/2 2197 5 2.3
*96P 961/2 2450 51/2 2.5
*96P should not be used on units less than 24" (610mm) deep. Consult Metro Engineering for alternate recommendations.
Swedged Posts (For use with Stem Casters in Cart Wash Applications)
• Each post has an aluminum cap swedged into the top of the post. Special Length Posts
Model No. Height
Approx.
Pkd. Wt.
Special length cut posts
Stainless Steel (in.) (mm) (lbs.) (kg) are available. Consult your
33UPS-SW 333/4 857 2 0.9 Metro representative for
54UPS-SW 5313/16 1366 3 1.4 more information.
63UPS-SW 6113/16 1570 31/2 1.6
Job_ ________________________________________________
10.01
Foot Plates
• Use to bolt units to the floor, or when a broader, more stable foot is desired. Foot plates
also help to protect floors by distributing the point load of the shelving unit across a
larger contact point.
• Foot plates (completely tightened) add 1/8" (3mm) to the specified heights of each
stationary post on the table.
Zinc Cat. No. 9993Z
Stainless Steel Cat. No. 9993S
Wire Shelving
“S’’ Hook
• Used to add on shelving units with only two posts required. Order two per shelf level.
Cat. No. 9995Z
All Metro Catalog Sheets are available on our Web Site: www.metro.com
L02-006
InterMetro Industries Corporation Printed in U.S.A. Rev. 11/08
North Washington Street, Wilkes-Barre, PA 18705 Information and specifications are subject to change
Phone: 570-825-2741 without notice. Please confirm at time of order.
✔
APPROVED REVISE REJECTED
NOTES:
1) MISSING FROM WALK-IN SUBMITTAL; COLDZONE
EVAPORATOR AND CONDENSER REMOTE REFRIGERATION.
2) PER SPECIFICATIONS; PROVIDE UNITS WITH E-CONTROL
SYSTEMS INTELLISENSE TEMPERATURE MONITORING,
RECORDING AND TEMPERATURE ALERTING SYSTEM.
REFER TO 114100 FOOD STORAGE EQUIPEMENT
SPECIFICATIONS.
✔
APPROVED REVISE REJECTED
NOTES:
1) MISSING FROM WALK-IN SUBMITTAL; COLDZONE
EVAPORATOR AND CONDENSER REMOTE REFRIGERATION.
2) PER SPECIFICATIONS; PROVIDE UNITS WITH E-CONTROL
SYSTEMS INTELLISENSE TEMPERATURE MONITORING,
RECORDING AND TEMPERATURE ALERTING SYSTEM.
REFER TO 114100 FOOD STORAGE EQUIPEMENT
SPECIFICATIONS.
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-09-20 FROM TAYLOR ADAMS, THIS
ITEM HAS BEEN APPROVED.
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Printed in U.S.A.
Foodservice Division: Phone 800-441-8440 ©2018 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100 Rev. 04/18
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Channel Manufacturing 401AC Item #12
Item No._____________________
Quantity______________________
Job Name_____________________
Spec No._____________________
Spacing
Model H W D Weight
Capacity
400AC FL 2"/30 Pans 701/4" 201/2" 26" 40
401AC FL 3"/20 Pans 70 /4"
1
20 /2"
1
26" 34
405AC FL 2"/27 Pans 64" 201/2" 26" 37
406AC FL 3"/18 Pans 64" 201/2" 26" 32
410AC SL 2"/30 Pans 701/4" 281/2" 18" 38
411AC SL 3"/20 Pans 701/4" 281/2" 18" 30
415AC SL 2"/27 Pans 64" 281/2" 18" 35
416AC SL 3"/18 Pans 64" 281/2" 18" 30
Options:
❑ /011 Caster Brakes (2)
❑ /CC Card Clip, Aluminum
❑ /009 Pan Stop, Aluminum
401AC
MADE
IN THE
USA Notes
Item No._____________________
Quantity______________________
Job Name_____________________
Spec No._____________________
Plate Caster Stem
Caster
ACCESSORIES
MADE
IN THE
USA
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
Submittal Sheet
ITEM# 16 ‐ PLANETARY MIXER (1 EA REQ'D)
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-09-20 FROM TAYLOR ADAMS, THIS
ITEM HAS BEEN APPROVED.
Project Name: AIA#:
Model #: Location:
SIS#: Item #: Quantity:
Rev. A 11-17-2017 Printed in the U.S. © Globe Food Equipment Company Specifications are subject to change without notice.
25.0 (64)
25.0 (64) 3.2
3.2(8.1)
(8.1)
11.511.5
(29.0)
(29.0)
24.5 (62)
24.5 (62)
23.0 (58)
23.0 (58)
20.0
20.0 (51)
16.3
16.3 (41)
25.25
21.6
25.25 (64)
21.6 (55)
51.5 (131)
51.5 (131)
(51)
(41)
(55)
41.0 (104)
41.0 (104)
(64)
18.518.5
(47)(47)
72.0 (183)
72.0 (183)
25.25 (64) 24.5 (62)
25.25 (64) 24.5 (62)
30.5 (77)
30.5 (77)
Mixer is constructed of a rigid cast iron body with front-mounted controls and 60-minute digital timer with last-batch recall. Mixer has 2 HP
custom built motor with overload protection and gear-driven, high torque permanently lubricated transmission consisting of heat-treated
hardened steel alloy gears and shafts. Mixer comes with 40 qt. stainless steel bowl, aluminum flat beater, stainless steel wire whip, aluminum
dough hook and non-slip rubber feet. Interlocked with removable stainless steel bowl guard with fully welded ingredient chute. Mixer has #12
attachment hub and interlocked bowl lift. Mixer is NSF and ETL listed. Two year parts and labor warranty.
Rev. A 11-17-2017 Printed in the U.S. © Globe Food Equipment Company Specifications are subject to change without notice.
Eagle Group HSA‐10‐FA‐P Item #17
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 1 1‐1/2"
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-09-20 FROM TAYLOR ADAMS, THIS
ITEM HAS BEEN APPROVED.
SOAP DISPENSERS
model # description
3062 soap dispenser, conventional, 12-oz.
soap dispenser, wall mounted with electric-eye
PLUMBING COMPONENTS
model # description
30791 tail piece
30789 p-trap
WASTE RECEPTACLE
20 gauge stainless steel. Removable. Comes with skirt. Must be
factory installed.
add suffix # for models:
HSA-10; HSA-10-F; HSA-10-FA; HSA-10-FDP; HSA-10-FE;
-T*
HSA-10-FDPE; HSA-10-FDPEE; and HSA-10-FW
* Example: HSA-10-FDP-T
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB® Division.
Phone: 302-653-3000 • Fax: 302-653-2065 • e-mail: quotes@eaglegrp.com EG20.52B Rev. 07/17
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2017 by the Eagle Group
_CE Williams MS Page: 40
Eagle Group ‐LRS Item #17
END SPLASHES
Hand Sink Accessories & Options—Miscellaneous
Type 304 stainless steel. Note: Will not work with Space Saver Hand
Sinks that have faucets with wrist handles.
Note: MICROGARD® cannot be put on hand sinks with end splashes.
FACTORY-INSTALLED
add suffix # description
-LS* left end splash only
-RS* right end splash only
-LRS* left and right end splash
* Example: HSA-10-F-LRS
WALL BRACKETS
model # description
6039 side mounting, one pair, does not fit Space Saver models
1869 side mounting, one pair, for Space Saver models only
SKIRT ASSEMBLIES
model # fits models
HSA-10; HSA-10-F; HSA-10-FA; HSA-10-FDP; HSA-10-FE;
60215
HSA-10-FDPE; HSA-10-FDPEE; and HSA-10-FW
6075 HSAN-10-F
ELECTROPOLISHED FINISH
For material handling applications.
add suffix # * description
Increases corrosion resistance, deburring, reduces product
-EP*
adhesion. Easier cleaning, Attractive appearance.
* Example: HSA-10-F-EP
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
1 3/4
Cord &
2 120 60 1 5‐15P 10
Plug
SPECIFICATIONS
SPEC #: ______________
SCOPE: This specification covers the model AP3BCF30-1 HURRiCHiLLTM Blast
Chiller/Shock Freezer. This compact unit has a self-contained, air-cooled
refrigeration system and is complete with all required controls and accesso-
ries. Several options are also available.
GENERAL: The unit has 3 pan slides for a total pan capacity of (3) 12” x 20”
x 2 1/2“ steam table pans. A core temperature probe is provided for accurate
control of temperature within the product.
PERFORMANCE: Blast chilling (soft or hard) lowers the food core tempera-
ture from 160°F to 38°F within 120 minutes. Shock freezing lowers the food
core temperature from 160°F to 0°F within 4 hours. Chilling/Freezing times
will vary somewhat, depending on the food quantity, initial temperature,
density, moisture content, specific heat, and type of container. The airflow
has a high velocity, indirect pattern designed to cool all levels at identical
rates. Time/temperature chilling and freezing rates meet or exceed all FDA,
MODES OF OPERATION:
Shock Freezing: This cycle is designed to avoid damage to the food
Automatic: The provided core temperature probe monitors the tempera-
structure, keeping the food free of large ice crystals. The air temperature
ture of the product and ends the cycle when the product is at a safe tempera-
is lowered to and held at -25°F. The freezing cycle is completed when the
ture.
food core temperature reaches 0°F.
American Panel Corporation | 5800 S.E. 78th Street, Ocala, Florida 34472-3412 | Phone: 1-800-327-3015 • (352) 245-7055 | Fax: (352) 245-0726
americanpanel.com
OPTIONS:
Mobile Units: 6” high stainless steel legs are standard. Heavy duty Wire Racks: Full width wire rack(s) to accomodate pans smaller than
casters, two with brakes, are optional. 12” x 20”.
INSTALLATION: A detailed installation manual is provided. It must be WARRANTY: The warranty covers all parts found to be defective and the
carefully followed to ensure proper operation and to protect your rights labor required to replace them for a period of one year from the date of
under the warranty. shipment. The compressor only is covered for an additional period of four
years, as a part only, no labor.
7.4.2017
American Panel Corporation | 5800 S.E. 78th Street, Ocala, Florida 34472-3412 | Phone: 1-800-327-3015 • (352) 245-7055 | Fax: (352) 245-0726
_CE Williams MS Page: 44
Lakeside Manufacturing 7120 Item #19
Spec. #
Reduce Injuries Caused By
Improper Pushing, Lifting
And Loading
AIA #
loaded cart safe and natural
Lit# EOSTT 0217 Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
UC-11
_CE Williams MS Page: 46
Ergo-One® System Utility Carts
Lakeside 7120 Item #19
L W
Model Information
Shelf Description Overall Size Case Weight
Model # of Size Clearance W L H* lb. (kg.)
Specifications
Top shelf height from floor is 40” (1016).
Unit shall be of fully welded stainless steel construction with an overall carrying capacity of 1000
pounds. Legs and frame shall be of U-frame design, eliminating the need for corner reinforcements.
Leg/frame shall be .120 x 1” x 1” angle stainless steel. Shelves shall be of 14-gauge stainless steel
Spec. #
and shall be continuously TIG welded to vertical leg frames. Shelves shall be reinforced front and
back with 18-gauge angle welded to the shelf underside. Bottom shelf shall be positioned no closer
than 20” (508 mm)from the floor surface, and top shelf shall be positioned no higher than 40” (1016
mm) from the floor surface. Push handles shall be of ergonomic vertical design and shall feature 8"
(203 mm) range grip height. Unit shall have two each 5” (127 mm) diameter extra-load swivel casters
with 1-1/4” wide non-marking polyurethane wheels and two each 8” diameter extra-load wheels
mounted to a fixed axle. Swivel casters shall be plate type and shall be bolted to an 18-gauge 5” wide
stainless steel cross member with a galvanized reinforcement. Unit shall have two each 6" (152 mm)
vertical bumpers riveted to front legs. Unit shall be NSF listed.
Optional Accessories
Extended perimeter bumper Set of two each 5” brake casters
All 5” swivel casters Ground and polished joint welds
UC-11
_CE Williams MS Page: 47
Item #20
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 1/2" 1/2" 1
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 B-0231-CR-KIT
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
Customer/Wholesaler______________________________
Contractor_______________________________________
Architect/Engineer_________________________________
Quarter-Turn
Cerama Cartridges
& Lever Handles w/
Color Coded Indexes
062X
12" Swing Nozzle w/
Stream Regulator Outlet
12"
305mm
2 3/8"
61mm
7 1/2"
191mm
3 5/8" 4 3/4"
91mm 121mm
B-0230-KIT
Short El Installation Kit
w/ (2) Stainless Steel Flexible Hoses
Product Specifications: Product Compliance:
8" Wall Mount Base Faucet, Quarter-Turn Cerama Cartridges, 12" Swing ASME A112.18.1 / CSA B125.1
Nozzle, Lever Handles & 1/2" NPT Eccentric Wall Flanges, Installation kits & NSF 61 - Section 9
(2) 24" Stainless Steel Flexible Hoses NSF 372 (Low Lead Content)
ANSI A117.1 (ADA)
Drawn: JBC Checked: JRM Approved: JHB Date: 06/22/16 Scale: 1:6 Sheet: 1 of 2
_CE Williams MS Page: 51
T&S Brass B‐0231‐CR‐KIT Item #21.1
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 B-0231-CR-KIT
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
ITEM
NO. SALES NO. DESCRIPTION
1 062X 12" Swing Nozzle
2 B-PT Stream Regulator Outlet
3 001048-45 Nozzle Tip Washer
4 000922-45 Lever Handle Screw
5 001661-45 Red Index-HW
6 001638-45 Lever Handle
7 012444-25 Quarter-Turn Cerama Cartridge,
RTC w/ Handle, Index & Screw
Quarter-Turn Cerama Cartridge,
8 011278-25 RTC
9 001660-45 Blue Index-CW
10 012445-25 Quarter-Turn Cerama Cartridge,
LTC w/ Handle, Index & Screw
Quarter-Turn Cerama Cartridge,
11 011279-25 LTC
12 001019-45 Coupling Nut Washer
13 00AA 1/2" NPT Female Eccentric
Flange
14 B-0230-K Short El Installation Kit
Short El Installation Kit w/ (2)
15 B-0230-KIT Hoses
3 4 14 15
2 5
9
1 6
7 10
8
11
13
12
Drawn: JBC Checked: JRM Approved: JHB Date: 06/22/16 Scale: NTS Sheet: 2 of 2
_CE Williams MS Page: 52
T&S Brass B‐3952‐01 Item #21.2
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 1 2"
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 B-3952-01
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
Contractor_______________________________________
Architect/Engineer_________________________________
Removable
Snap-in Strainer
4 7/16"
Ø2 11/16" [113mm] Ø2" [51mm]
[68mm] Opening Required
12 1/4"±1/4"
[312mm]
4 1/2" 2 5/8"
[114mm] 67mm
Open
Drawn: KJG Checked: JRM Approved: JHB Date: 08/28/14 Scale: 1:8 Sheet: 1 of 2
_CE Williams MS Page: 54
T&S Brass B‐3952‐01 Item #21.2
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 B-3952-01
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
ITEM SALE NO. DESCRIPTION
1 010389-45 O-Ring, Plunger
2 010390-45 Ferrule, Coupling Nut
3 010391-45 Nut, Coupling for Twist Drain
4 010382-45 Gasket, 3 1/2" Face Flange
5 010384-45 Flange, 3 1/2" Face
6 010386-45 Strainer, 3 1/2" Snap-in Removable
7 010388-45 Plunger, Lever and Twist Drain
8 010393-45 Handle, Rotary Waste Valve Twist
9 011355-45 Tube, Overflow Elbow
10 011356-45 Head, Overflow Tube
4
8 10
7
2
3
9
012640-45
Waste Drain Overflow Cap
w/ Sealing Washer
(Included)
Drawn: KJG Checked: JRM Approved: JHB Date: 08/28/14 Scale: NTS Sheet: 2 of 2
_CE Williams MS Page: 55
Custom CUSTOM Item #22
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 1/2" 1/2" 1
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 1 2"
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
Cord &
1 120 60 1 5.6 1/2
Plug
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-09-20 FROM TAYLOR ADAMS, THIS
ITEM HAS BEEN APPROVED.
HS7/HS7N
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
SLICER
INTERLOCKS
■ Home-Start Position
■ No-Volt Release
HS7/HS7N
SLICER 701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
SOLUTIONS / BENEFITS
PRECISION SLICING Zero Knife Exposure*
■ Knife edge is covered when sharpener is both
13” CleanCut Knife
™
mounted and removed, making cleaning easier
■ Super alloy edge stays sharp longer
■ Gauge plate remains closed during operation of
■ Lasts two to three times longer than carbon coated
sharpener
or stainless steel knives
Home Start Position
Top Mounted Borazon Stone Sharpener
■ Carriage must be in ‘home position’ before the slicer
■ Single-action sharpens and hones in just 15 seconds
will start
■ Removable and warewasher safe for easy cleaning
and sanitation – can be used wet or dry No Volt Release
■ Lifetime guaranteed Borazon sharpening stones ■ Slicer must be restarted if power fails or slicer is
provide maximum performance with reduced unplugged
maintenance costs
EASY TO CLEAN
Machined Grooves on Gauge Plate and Knife Cover
■ Reduces drag for smoother slicing motion Removable Knife Option* – HS7
■ Knife easily removes with patented removal tool
Double-Action Indexing Cam
■ Area within ring guard is open for faster cleaning
■ The first full revolution of the indexing knob provides
■ Knife and tool are warewasher safe for easy cleaning
precise control of shaving, chipping and thin slicing
and sanitation
■ The second revolution opens the gauge plate quickly
for thicker slicing Removable Ring Guard Cover*
■ Gauge plate holds position for consistent, precision ■ Catches product debris around the knife for easy
slicing removal during cleaning
■ Reduces time to ‘floss’ during cleaning
EASY TO USE
Exclusive Tilting, Removable Carriage System*
1
⁄ 2 H.P. Knife Drive Motor ■ Tilt design allows for ease of mid-day cleaning
■ Reserve power runs at 430 rpm for optimum results ■ Removable for complete cleaning and sanitation
Timing Belt Automatic Drive System Rear-Mounted, Removable Meat Grip Arm
■ Extends belt life while producing optimum slicing ■ Opens up front of product tray for unobstructed
results loading
■ Quieter operating slicer ■ Removable meat grip allows for easy cleaning
■ Four carriage speeds including 28, 38, 48 and 58
Lift Assist Cleaning Leg
strokes per minute
■ Gas assisted leg helps operator easily lift machine
Three Stroke Lengths for cleaning underneath
■ Three stroke lengths ideal for a variety of products
Sanitary Burnished Aluminum Base
Electroless Nickel Plated Single Slide Rod with ■ Limited cracks/crevices or bolt holes where product
Reservoir Wick in Transport can lodge and bacteria may grow
■ Smooth operation with continous lubrication of ■ Easy clean up and durable finish
carriage rod
HS7/HS7N
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
SLICER
SPECIFICATIONS
KNIFE HOUSING AND BASE
13" CleanCut Knife: The knife is approximately 13 inches, Sanitary Burnished Aluminum Base: One-piece base
constructed of 304L stainless steel and high performance has fewer places to harbor soil and is easier to clean.
Stellite alloy. Knife cover is retained magnetically, and is Limits holes or crevices in which food can lodge.
quickly removed by pulling straight back on the top cover
Finish: Stainless steel top cover, anodized aluminum
knob.
product tray and gauge plate.
Removable Knife Option HS7: The patented knife
Exclusive Tilting, Removable Carriage System:
removal tool covers the knife edge and safely removes
Aluminum product tray tilts easily for mid-day cleaning
knife from gauge plate to allow for thorough cleaning.
and is removable for thorough cleaning and sanitation
Removable Ring Guard Cover: Fits on top of ring guard procedures. The carriage has 12.5" manual travel.
to catch food debris. When removed, reveals a 0.12"
Electroless Nickel Plated Single Slide Rod with
space between knife and guard for easier flossing. Ring
Reservoir Wick in Transport: Transport slide rod is
guard is made with Zytel™ plastic and can be washed in
E-Nickel electroless plated. Slide rod bearings feature an
warewasher or three compartment sink.
oil reservoir/oil wick.
Zero Knife Exposure: Knife edge is not exposed during
Double-Action Indexing Cam: A solid construction index
cleaning or sharpening procedures.
knob moves the gauge plate via a barrel cam ensuring
Top Mounted Borazon Stone Sharpener: Single action consistent slice thickness across machine and over time.
operation utilizing two Borazon stones to sharpen and First revolution of index cam for precision slicing; second
hone in five seconds. Removable, top mounted and revolution for thicker slicing selection.
warewasher safe. When sharpener is removed for cleaning,
Lift Assist Cleaning Leg: Gas assisted leg helps operator
knife edge is completely shielded. Borazon stones have a
easily lift machine for cleaning underneath.
lifetime guarantee.
Ergonomic Style Handle: Specially shaped and
MOTOR positioned for ease of use during manual operation.
Poly V-Belt Knife Drive System: Knife is driven by Rear Mounted, Removable Meat Grip Arm: Rear
a Hobart Poly V belt and runs at 430 rpm for optimal mounted grip is high strength thermoplastic. Swings out of
performance. way when not in use.
Four Stroke Speeds: Stroke speed can be set to 28, 38, Electrical Specification: 120/60/1; 5.6 Amps.
48 and 58 strokes per minute.
Switch: Moisture protected push button switch.
1
⁄ 2 H.P. Knife Drive Motor: 1⁄ 2 H.P. permanently lubricated
ball bearings. Single phase capacitor-start, induction run. Cord & Plug: 6-foot, three-wire power supply cord and
plug. Plug not furnished on export models.
INTERLOCKS Capacity: The carriage will take food up to 53 ⁄4" x 103 ⁄4"
Home Start Position: Home-start ensures carriage is in a rectangle or 7.5" in diameter.
convenient position before starting the slicer. Gauge Plate: Gauge plate is a heavy aluminum extrusion
No Volt Release: In the event of a power loss, slicer must with machined grooves for smooth feeding. Adjustable to
be restarted before operation can continue. cut any thickness of slice up to 1".
Warranty: All parts and service coverage for one year
including knife. Lifetime guarantee on Borazon stones in
the sharpening system.
Shipping Weight: 138 lbs.
HS7/HS7N
SLICER 701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
E1
30 5/16"
ELECTRICAL AND GROUNDING CONNECTIONS MUST
COMPLY WITH THE APPLICABLE PORTIONS OF THE
NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL
ELECTRICAL CODES.
E1 - ELECTRICAL CONNECTIONS
24 5/8"
27 1/4"
19 1/8"
5 1/2"
26 3/8"
As continued product improvement is a policy of Hobart, specifications are subject to change without notice.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 1 1‐1/2"
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-09-20 FROM TAYLOR ADAMS, THIS
ITEM HAS BEEN APPROVED.
Model #HSAP-14-FW
SIDE VIEW
Model #HSAP-14-ADA-FW
END SPLASHES
Hand Sink Accessories & Options—Miscellaneous
Type 304 stainless steel. Note: Will not work with Space Saver Hand
Sinks that have faucets with wrist handles.
Note: MICROGARD® cannot be put on hand sinks with end splashes.
FACTORY-INSTALLED
add suffix # description
-LS* left end splash only
-RS* right end splash only
-LRS* left and right end splash
* Example: HSA-10-F-LRS
WALL BRACKETS
model # description
6039 side mounting, one pair, does not fit Space Saver models
1869 side mounting, one pair, for Space Saver models only
SKIRT ASSEMBLIES
model # fits models
HSA-10; HSA-10-F; HSA-10-FA; HSA-10-FDP; HSA-10-FE;
60215
HSA-10-FDPE; HSA-10-FDPEE; and HSA-10-FW
6075 HSAN-10-F
ELECTROPOLISHED FINISH
For material handling applications.
add suffix # * description
Increases corrosion resistance, deburring, reduces product
-EP*
adhesion. Easier cleaning, Attractive appearance.
* Example: HSA-10-F-EP
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
1 208 60 3 Direct 30.0 10.4 3/4
2 208 60 3 30.0
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-09-20 FROM TAYLOR ADAMS, THIS
ITEM HAS BEEN APPROVED.
Item: ___________________________
Project:_________________________
Date:___________________________
Models:
MCO-ES-10-S MCO-ES-20-S MCO-ED-10-S MCO-ED-20-S
Specifications:
Garland Master full-size standard depth or deep depth
(Prefix MCO-ED) electric convection oven. 10.4 kW/
oven cavity, 3/4 HP fan motor with two speed fan con- NOTE: Ovens suppled with casters must be installed with
trol. Master 200 Solid State control. Porcelain enameled an approved restraining device.
oven interior with coved corners, Six (6) oven racks and
13‑position rack guides. Interior measures 29"(736mm)
W x 24" (610mm) H x 24" (610mm) D for standard depth
and 29" (736mm) W x 24" (610mm) H x 28" (610mm) D
for deep depth. Stainless steel front, sides, top and legs.
60/40 dependent door design with double pane thermal
window in both doors and interior lighting. Models with
suffix 20-S are double decked. Specify voltage and phase.
UL, CUL and NSF Listed.
1-1/4"
7-3/4" 1-11/16" [32mm]
[197mm] [43mm]
3/4"
[19mm] 32-1/8" REAR CABLE
FLUE: 2-3/8" x 5" [816mm]
[60mm x 127mm] ENTRANCE
D 38-1/4"
[972mm]
H
32-1/8"
32-1/8" [816mm]
[816mm]
17-3/4"
[451mm]
11-1/2"
TOP VIEW [292mm] 9-1/4"
[235mm]
6-1/4" DOUBLE DECK
1-1/4" 38" [159mm] FRONT VIEW
[32mm] [965mm]
Installation Notes:
Non‑Conbustible and
Combustible Wall Clearances
32-1/8" REAR CABLE Sides *1" (25mm) Back 6" (152mm)
[816mm] ENTRANCE
*Note: Installations beside units with high
heat sources it is recommended to leave 6”
H (152mm) on the right side of oven. Refer to
the installation manual for more detail
Entry Clearance
Crated Uncrated
25-3/8" 28-3/8"
[645mm] [721mm] 44-1/2" (1130mm) 32-1/2" (862mm)
Electrical specifications include motor requirements. 3/4 HP, 2
SINGLE DECK speed motor: 1725/1140 rpm, (60Hz); or 440/950 rpm (50Hz).
FRONT VIEW
Form# MCO-ES/ED-10/20S (04/14/15)
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
1 208 60 3
2 208 60 3 50.0 18.0
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 1/2" 1/2" 1
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-09-20 FROM TAYLOR ADAMS, THIS
ITEM HAS BEEN APPROVED. PROVIDE FLANGED FEET.
Project
Quantity
DIMENSIONS CAPACITIES
MODEL A B C D F G H CLEARANCE In 4 oz. servings. Other sizes may be calculated.
30 gallons / 115 Liters.............960
RIGHT:
37 7/8" 24 1/2" 31 3/4" 12" 18 1/4" 5 3/4" 8" 40 gallons / 150 Liters...........1280
SEL-30-T1 4" (102mm) (manual tilt)
(963mm) (623mm) (807mm) (305mm) (464mm) (146mm) (204mm) 1" (26mm) (power tilt)
ELECTRICAL
Width - 44”
Depth - 44”
Height - 54”
Volts Ph Hz Total Amps Wire Volts Ph Hz Total Amps Wire SEL40T1 Weight - 654 lbs
Watts Size Watts Size Width - 48”
SEL-30-T1 (Standard Wattage) SEL-40-T1 (Standard Wattage) Depth - 58”
208 1 60 12000 57.7 4 208 1 60 18000 86.5 2 Height - 54”
208 3 60 12000 33.3 8 208 3 60 18000 50.0 6
240 1 60 12000 50.0 6 240 1 60 18000 75.0 3
240 3 60 12000 28.9 8 240 3 60 18000 43.3 6
380 1 50 10013 26.3 8 380 1 50 15019 39.5 6
380 3 50 10013 15.2 12 380 3 50 15019 22.8 10
416 1 50 12000 28.8 8 416 1 50 18000 43.3 6
416 3 50 12000 16.7 10 416 3 50 18000 25.0 8
480 1 60 12000 25.0 8 480 1 60 18000 37.5 6
480 3 60 12000 14.4 12 480 3 60 18000 21.7 10
SEL-30-T1 (High Wattage) SEL-40-T1 (High Wattage)
208 1 60 16020 77.0 3 208 3 60 24000 66.6 4 LEG LOCATION &
208 3 60 16020 44.5 6 240 3 60 24000 57.7 4 SUGGESTED FLOOR DRAIN DETAIL
240 1 60 16020 66.8 4 380 3 50 20026 30.4 8
240 3 60 16020 38.5 6 416 3 50 24000 33.3 8
5 1/4"
(134mm)
380 1 50 13367 35.2 8 480 3 60 24000 28.9 8 C (FAUCET
380 3 50 13367 20.3 10 OPEN)
416 1 50 16020 38.5 6
416 3 50 16020 22.2 10 3 7/8" (99mm)
480 1 60 16020 33.4 8
480 3 60 16020 19.3 10
25 15/16" 30"
(659mm) (762mm)
A
B
(PAN SURFACE)
H C FLOOR
DRAIN
GRATE
DPK FOR OPTIONAL 2" TD VALVE 12" x 20"
Braising Pans / Tilting Skillets
120° 120°
7/16"Ø, 3 HOLES
ON 3 1/8" (80mm) B.C.D.
TD 2 OUTLET 2" (51mm)
9 1/2" (241mm)
TD 2 (PAN DEPTH)
39" H C
991mm
35"
889mm
(RIM
HEIGHT)
23"
585mm
RECOMMENDED FLOOR
SLOPE 1" (26mm) IN 4' (1220mm)
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., NSF, CGA, CSA, ETL and others. (NOT TO SCALE)
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 1/2" 1/2" 1
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 B-0160
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
Job Name__________________________Date_________
Model Specified_____________________ Quantity______
Customer/Wholesaler______________________________
Contractor_______________________________________
Architect/Engineer_________________________________
B-0107-035
1.42 GPM
Angled Spray Valve
Wall Hook
w/ (2) Mounting Screws
6 1/4"
158mm
2 5/16"
58mm Mounting Surface
1 3/8"
2 1/4" [57mm] Flange 18" Flexible
w/ 1 1/8" [29mm] Shank Stainless Steel 35mm
Supply Hoses Maximum
Compression Fittings Thickness
for 5/8" O.D. Copper Tubing
(Remove Compression Nut
for 1/2" NPSM Male)
Rough-In Requirement:
1 1/2" [38mm] Mounting Hole
Product Specifications: Product Compliance:
Single Hole Deck Mount Mixing Faucet, Quarter-Turn Eterna ASME A112.18.1 / CSA B125.1
Cartridges w/ Spring Checks, Lever Handles, 90° Swivel Adapter, 44" NSF 61 - Section 9
Flexible Stainless Steel Hose, 1.42 GPM Angled Spray Valve, Wall NSF 372 (Low Lead Content)
EPAct 2005 (PRSV)
Hook & 18" Flexible Stainless Steel Supply Hoses w/ 1/2" NPSM Male
Inlets
Drawn: MRC Checked: JRM Approved: JHB Date: 05/05/17 Scale: 1:6 Sheet: 1 of 2
_CE Williams MS Page: 73
T&S Brass B‐0160 Item #27A
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 B-0160
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
ITEM
NO. SALES NO. DESCRIPTION
44" Flexible Stainless Steel
1 B-0044-H2A
Hose, Less Handle
2 001014-45 Washer, B-0100 Hose Barrel
5
3 002987-40 Grip Handle
6 4 000907-45 Spray Valve Hold Down Ring
4
5 B-0107-035 1.42 GPM Angled Spray Valve
6 010476-45 #27 Washer
3 7 B-0104-D Dummy Wall Hook
8 034A 90° Swivel Adapter Arm
Quarter-Turn Eterna Cartridge
9 012442-40NS
w/ Spring Check, LTC
2 Quarter-Turn Eterna Cartridge
10 002711-40NS w/ Spring Check, Handle, Blue
Index & Screw, LTC
11 018506-19NS Blue Button Index, Press-in
12 001638-45NS Lever Handle (New Style)
13 012534-45 18" Flexible Supply Hose (2)
14 000965-45 Lock Nut
15 002290-45 Lock Washer
16 012443-40NS Quarter-Turn Eterna Cartridge
1 7 w/ Spring Check, RTC
Quarter-Turn Eterna Cartridge
17 002712-40NS w/ Spring Check, Handle, Red
Index & Screw, RTC
6 18 000925-45 Lab Handle Screw
8
19 001193-19NS Red Button Index, Press-in
9 10
19
18
17
15
16
14
11
12
13
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 1 4"
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-09-20 FROM TAYLOR ADAMS, THIS
ITEM HAS BEEN APPROVED. PROVIDE ITEM WITH
ANTI-SPLASH.
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB® Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com EG25.00 Rev. 04/12
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2012 by the Eagle Group
_CE Williams MS Page: 76
Eagle Group FT‐2436‐FG Item #28
Catalog Specification Sheet No. EG25.00
Item No.:
Project No.:
S.I.S. No.:
12˝ (305mm)-WIDE TROUGHS 15˝ (381mm)-WIDE TROUGHS 18˝ (457mm)-WIDE TROUGHS 24˝ (610mm)-WIDE TROUGHS
dimension A: 7˝ (178mm) dimension A: 10˝ (254mm) dimension A: 13˝ (330mm) dimension A: 19˝ (483mm)
dimension B: 9˝ (229mm) dimension B: 12˝ (305mm) dimension B: 15˝ (381mm) dimension B: 21˝ (533mm)
dimension C: 12˝ (305mm) dimension C: 15˝ (381mm) dimension C: 18˝ (457mm) dimension C: 24˝ (610mm)
dimension D: 9.25˝ (232mm) dimension D: 12.25˝ (311mm) dimension D: 15.25˝ (387mm) dimension D: 21.25˝ (540mm)
WITH WITH WITH WITH WITH WITH WITH WITH
YELLOW * STAINLESS YELLOW * STAINLESS YELLOW * STAINLESS YELLOW * STAINLESS
FIBERGLASS STEEL FIBERGLASS STEEL FIBERGLASS STEEL FIBERGLASS STEEL dimension dimension
GRATING GRATING GRATING GRATING GRATING GRATING GRATING GRATING E F
model # model # model # model # model # model # model # model # in. mm in. mm
FT-1218-FG FT-1218-SG n/a n/a n/a n/a n/a n/a 18˝ 457 15˝ 381
FT-1224-FG FT-1224-SG FT-1524-FG FT-1524-SG FT-1824-FG FT-1824-SG FT-2424-FG FT-2424-SG 24˝ 610 21˝ 533
FT-1230-FG FT-1230-SG FT-1530-FG FT-1530-SG FT-1830-FG FT-1830-SG FT-2430-FG FT-2430-SG 30˝ 762 27˝ 686
FT-1236-FG FT-1236-SG FT-1536-FG FT-1536-SG FT-1836-FG FT-1836-SG FT-2436-FG FT-2436-SG 36˝ 914 33˝ 838
FT-1248-FG FT-1248-SG FT-1548-FG FT-1548-SG FT-1848-FG FT-1848-SG FT-2448-FG FT-2448-SG 48˝ 1219 45˝ 1143
FT-1260-FG FT-1260-SG FT-1560-FG FT-1560-SG FT-1860-FG FT-1860-SG FT-2460-FG FT-2460-SG 60˝ 1524 57˝ 1448
FT-1272-FG FT-1272-SG FT-1572-FG FT-1572-SG FT-1872-FG FT-1872-SG FT-2472-FG FT-2472-SG 72˝ 1829 69˝ 1753
FT-1284-FG FT-1284-SG FT-1584-FG FT-1584-SG FT-1884-FG FT-1884-SG FT-2484-FG FT-2484-SG 84˝ 2134 81˝ 2057
FT-1296-FG FT-1296-SG FT-1596-FG FT-1596-SG FT-1896-FG FT-1896-SG FT-2496-FG FT-2496-SG 96˝ 2438 93˝ 2362
FT-12120-FG FT-12120-SG FT-15120-FG FT-15120-SG FT-18120-FG FT-18120-SG FT-24120-FG FT-24120-SG 120˝ 3048 117˝ 2972
* To order Floor Trough with Gray Fiberglass Grating, add suffix “G”. Example: FT1224-FGG
To order Floor Trough with Gray ADA-compliant wide “T” Bar Fiberglass Grating, add suffix “-ADA”. Example: FT1224-FG-ADA. Available for Floor Troughs
with Fiberglass Grating only—NOT for troughs with stainless steel grating.
Floor Drains
width length
model # description in. mm in. mm
FD-FG* with yellow fiberglass grating 12˝ 305 12˝ 305
FD-SG with stainless steel grating 12˝ 305 12˝ 305
Note: Floor opening = 111⁄2˝ x 111⁄2˝ (292 x 292)
* To order Floor Drain with Gray Fiberglass Grating, add suffix “G”. Example: FD-FGG
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Printed in U.S.A.
Foodservice Division: Phone 800-441-8440 ©2012 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100 Rev. 04/12
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
_CE Williams MS Page: 77
Garland/US Range E24‐12H Item #29
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
1 208 60 1 Direct 20.2
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-09-20 FROM TAYLOR ADAMS, THIS
ITEM HAS BEEN APPROVED.
Item: E24-12H
Project:_____________________________
Date:_______________________________
Standard Features
• Stainless steel front and sides
• Removable porcelain enameled spill-over bowls
• 4" (102mm) Sanitary legs
• Heat-On indicator lamps
• Two 8 1/2" (216mm) 2.1 kW elements
• Infinite switch with “Heat On” indicator light for
each element
• One-Year limited parts & labor warranty
(USA & Canada only)
Specifications
The Garland E24-12H electric heavy duty counter hot plate
is designed and engineered for high volume fast food
operations, providing fast preheat, high production and
versatility with quality results. Designed as freestanding
units or to bank with other E24 series equipment or with
G24 series gas counter equipment providing flush fronts
and backs. Stainless steel front and sides, 15" (381mm)
wide x 29" (710mm) deep x 11 1/4" (286mm) high. Elements
tilt up to facilitate removal of porcelain enameled spillover
bowls for easy cleaning. Infinite heat switch with indicator
light controls each 8 1/2" (216mm) diameter 2.1 kW ele-
ment, both switches have “OFF” settings. Indicator lights
are mounted on switch panel and show when element is
“ON”. Front access panel is removable.
15" 29"
[381mm] [737mm]
11-1/4"
[286mm]
Item: _______________________________
Project:_____________________________
Approval:___________________________
Equipment Stands
Models:
CS24 Stands for E24 & G24 Series
CS24-15 CS24-24 CS24-48 CS24-72
CS24-18 CS24-36 CS24-60
CSD Stands for Designer Series
CSD-GF CSD-18 CSD-30 CSD-42
CSD-15 CSD-24 CSD-36
Standard Features
• Stainless steel construction
• Seamless welded square tube legs
• 35-1/2" (902 mm) working height
• Accommodates 15"-72" (381-829 mm) widths
• Intermediate shelf in units up to 48" (1219 mm)
• CS24 stands depth 28 29/32" , CSD stands
depth 24".
• All CS24 and CSD stands are designed
specifically to fit Garland indented models.
Stainless Steel CS24/ CSD Series Counter Options & Accessories
Equipment stand Shown with optional casters Swivel casters set of 4 w/front brakes
Specifications:
Shall be Garland Countertop Equipment Heavy
Duty Stand for use with E24, G24 or ED,GD designer
series units. One unit per stand. Model _______with
stainless steel construction and seamless welded
square tube legs. Unit to have intermediate shelf,
with working height of 35-1/2" (902 mm).
• Many local codes exist, and it is the responsibility of the owner and installer to
comply with those codes.
• Garland reserves the right to change or improve product specifications without
notification.
• Garland products are not approved or authorized for home or residential use,
but are intended for commercial applications only. Garland will not provide
service, warranty, maintenance or support of any kind other than in commecial
applications.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
Specification Sheet
Worktables with Flat Top and
Short Form Specifications
Eagle worktables, Spec-Master® series, model ____________. Stainless Steel Base with
Top constructed of 14 gauge 300 series stainless steel, with
11⁄2˝ roll on front and rear, and sides turned down 90°.
Undershelf—Spec-Master® Series
Undershelf is adjustable and constructed of 18 gauge 300 MODELS:
series stainless steel with marine edge. Top reinforced with T2424SE T24144SE T30132SE T36144SE
stainless steel hat channels and sound deadened. Constructed T2430SE T3030SE T30144SE T4848SE
with uni-lok® patented gusset system with the gussets T2436SE T3036SE T3648SE T4860SE
recessed into the hat channels to reduce lateral movement. T2448SE T3048SE T3660SE T4872SE
Legs are 15⁄8˝ O.D., stainless steel, with stainless steel gussets T2460SE T3060SE T3672SE T4884SE
and 1˝ stainless steel adjustable bullet feet. T2472SE T3072SE T3684SE T4896SE
T2484SE T3084SE T3696SE T48108SE
T2496SE T3096SE T36108SE T48120SE
T24108SE T30108SE T36120SE T48132SE
Spec-Master® Series Worktables with Flat Top and Stainless Steel Base with Undershelf
T24120SE T30120SE T36132SE T48144SE
T24132SE
Tabletop
• Patented uni-lok® gusset system (patent #5,165,349): gussets
are recessed into hat channel, reducing lateral movement.
• Top reinforced with welded-on hat channel.
• Sound-deadened between top and channels.
• 11⁄2˝ (38mm)-diameter 180° rolled edges on front and rear.
Ends are turned down 90° providing for flush installations
when required.
• 14 gauge 300 series polished stainless steel.
Adjustable Undershelf
• 18 gauge 300 series stainless steel.
• Guesset welded to each corner.
• Heavy duty marine edge design.
Patented uni-lok® System
(Patent No. 5,165,349) Legs—15⁄8˝ (41mm)-diameter
• 24˝ to 36˝ (610 to 914mm)-wide units that are 96˝ (2438mm)
and longer come with six legs or more. 48˝ (1219mm)-wide
units that are 72˝ (1829mm) and longer come with six legs
or more.
• Heavy gauge stainless steel.
• 1˝ (25mm) adjustable stainless steel feet.
Options / Accessories
Drawer Duplex receptacles
Lock Pot rack
Casters Sink
Stainless steel bullet feet Additional undershelf
Overshelves Stabilizer Bar (for 30˝-
and 36˝-wide tables)
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA Certifications / Approvals
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB® Division.
Phone: 302-653-3000 • Fax: 302-653-2065 • e-mail: quotes@eaglegrp.com EG10.41C Rev. 09/15
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2015 by the Eagle Group
_CE Williams MS Page: 89
Eagle Group T3060SE Item #34
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Printed in U.S.A.
Foodservice Division: Phone 800-441-8440 ©2015 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100 Rev. 09/15
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
_CE Williams MS Page: 90
Eagle Group 502971 Item #34
Tier Drawers and Drawer Assemblies for Stainless Steel and Hardwood Tables
Regular Tier Drawers
• Heavy gauge type 430 stainless steel cabinet with three roller-track drawers.
• Available with nylon feet or legs.
• Includes guides, zinc-plated full-extension slides, and stainless steel drawer.
• Hemmed safety pull handle on each drawer.
• All shipping weights are approximate.
width x length x height weight
model # description in. mm lbs. kg
TD3 3 drawers, with nylon feet 221⁄2˝ x 24˝ x 22˝ 572 x 610 x 559 75 34.0
TD3L 3 drawers, with legs 221⁄2˝ x 24˝ x 341⁄2˝ 572 x 610 x 876 78 35.4
• Utilizes totally removable drawer slides certified by the National Sanitation Foundation.
• Otherwise, design and features are the same as tier drawers listed above.
• Hemmed safety pull handle on each drawer.
• Optional pan replacement available: Model #608120.
width x length x height weight
model # description in. mm lbs. kg
NTD3 3 drawers, with nylon feet 221⁄2˝ x 24˝ x 22˝ 572 x 610 x 559 75 34.0
NTD3L 3 drawers, with legs 221⁄2˝ x 24˝ x 341⁄2˝ 572 x 610 x 876 78 35.4
Options / Accessories
Drawer lock (suffix “-L”)
Pan replacement for NSF-Approved Tier Drawers
Pan replacement for drawer assemblies
* Holes are predrilled for 20˝ x 20˝ drawers only. • Removable drawer pan.
• Type 304 stainless steel assemblies.
• Insulated front.
• Self-closing drawer slides that fully extend from housing.
• These drawer assemblies are stackable.
Optional Pan
width x length x height Replacement
(drawer pan only) weight
model # in. mm lbs. kg model #
50297 * 20˝ x 15˝ x 5˝ 508 x 381 x 127 40 18.1 17 608
502971 20˝ x 20˝ x 5˝ 508 x 508 x 127 40 18.1 6082
* Tables must be field drilled for mounting.
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Printed in U.S.A.
Foodservice Division: Phone 800-441-8440 ©2018 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100 Rev. 06/18
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
_CE Williams MS Page: 92
Custom CUSTOM Item #35
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
Cord &
1 120 60 1 5‐15P 7.0 1
Plug
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-09-20 FROM TAYLOR ADAMS, THIS
ITEM HAS BEEN APPROVED.
BL
3 23
DIS S Quantity per batch
ADES C Up to 2.2 lbs
in cutter function
CUTTER FUNCTION
A SALES FEATURES • 3 qt. stainless steel cutter bowl with handle, and high
resistance smooth blade assembly.
R 2 N Ultra Combination Processor: Bowl cutter & Vegetable
Prep equipped with a cutter attachment for chopping, fine VEGETABLE FUNCTION
mincing, emulsions, grinding and kneading, and a vegetable • Vegetable preparation attachment equipped with
preparation attachment for slicing, grating, ripple cut slicing, 2 hoppers :
and julienne. 1 large hopper (surface : 12 square inches) and 1 cylindrical
hopper (Ø : 2 1/4’’). Removable bowl and lid.
• Removable chute and feed lead for dishwasher safe and
B TECHNICAL FEATURES easy cleaning.
R 2 N Ultra Combination Processor: Bowl cutter & Vegetable • Vertical pusher presses on vegetables for uniform cuts.
Prep. Single phase 120/60/1. Power 1 HP. Speed: 1725 rpm. • Large range of 23 stainless steel discs available as option.
3 qt. cutter bowl in stainless steel and smooth bowl-base blade COULIS/ FRUIT SAUCE & CITRUS PRESS FUNCTIONS:
assembly. Vegetable preparation attachment in composite
• Option: Cuisine Kit including a coulis/ fruit sauce attachment
material equipped with 2 hoppers : 1 large and 1 cylindrical and a citrus press attachment to prepare amuse-bouche, in-
hopper. Supplied with 2mm (5/64’’) grating and 4mm (5/32’’) a-glass preparations, sauces, soups, sorbets and ice cream,
slicing discs. Large range of 23 stainless steel discs available as smoothies, jam, fruit pastes...
option. 10 to 30 meals.
Select your options at the back page, F part. ACCESSORIES INCLUDED
• Cutter attachment: lid and high resistance stainless steel
smooth blade assembly with removable cap.
C TECHNICAL DATA • Vegetable attachment : chute, feed lead and discharge plate.
• Supplied with 2 mm (5/64’’) grating and 4mm (5/32’’)
Output power 1 HP
slicing discs
Electrical data 120V/60/1 - 7 Amp
Speed 1725 rpm
Dimensions (WxDxH) 8 3/4’’ x 15 13/16’’ x 19 3/16’’
Rate of recyclability 95%
Net weight 27 lbs
Nema # 5-15P STANDARDS
ETL electrical and sanitation Listed/ cETL (Canada)
R 2 N Ultra
• OPTIONAL DISCS
Slicing
1 mm (1/32”) 27051
2 mm (5/64”) 27555
3 mm (1/8”) 27086
4 mm (5/32”) 27566
5 mm (3/16”) 27087
6 mm (1/4”) 27786
Ripple cutting
2 mm (5/64”) 27621
G ELECTRICAL DATA
120V/60/1 - delivered with cord and plug
R 2 N Ultra
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 1/2" 1/2" 1
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 1 2"
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
1 208/240 60 3 44.1/50.6 15.9/21.0
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 3/4" 3/4" 1 2"
Project ________________________________________
C4eT 6.20 ES
Item __________________________________________
Quantity ______________________________________
Date _________________________________________
Dimensions
Weights
Views
C4eT 6.20 ES
9758232_04 ENG_USA 05/15. © 2015 Manitowoc. Please note that the product is being continuously improved and that, as a result, these specifications are subject to change without notice.
View from above with wall clearances
(disappearing door optional)
2
_CE Williams MS Page: 104
Convotherm C4 ET 6.20ES Item #39
Capacity
C4eT 6.20 ES
Electrical specifications
Water
Sheet pans, full size (18"x26")* 6 Flow pressure 22 - 87 PSI / 1.5 - 6 bar
Frying baskets, half size (12"x20") 12 Drain version Permanent hookup (recommend
ed) or funnel waste trap
Plates (optional plate rack) 27
Type 2" I. D. (comes elbow-shaped as
Max. loading weight standard)
Per combi steamer 132 lbs Slope for drainpipe min. 3.5% (2°)
Per shelf level 33 lbs
* Wire shelves required.
Water quality
Electrical supply Water connection A* for water injection
General requirements Drinking water, typically treated
208V 3PH 60Hz / 240V 3PH 60Hz * water
Rated power consumption 15.9 / 21.0 kW (install a water treatment system if
necessary)
Rated current 44.1 / 50.6 A
TDS 70 - 125 ppm
Power supply wire gauge 6 AWG
Hardness 70 - 125 ppm (4 - 7 gpg)
Conductor insulation rating 194°F / 90°C
Water connection B* for cleaning, recoil hand shower
440V 3PH 60Hz / 480V 3PH 60Hz *
General requirements Drinking water, typically untreated
Rated power consumption 16.3 / 19.3 kW water
Rated current 21.4 / 23.3 A TDS 70 - 360 ppm
Power supply wire gauge 8 AWG Hardness 70 - 360 ppm (4 - 21 gpg)
Conductor insulation rating 194°F / 90°C Water connections A, B*
When using the ConvoSmoke option, the pH value 6.5 - 8.5
only available voltage options are:
Cl- (chloride) max. 60 ppm
208V 3PH 60Hz *
Cl2 (free chlorine) max. 0.2 ppm
Rated power consumption 15.9 kW
2-
SO4 (sulfate) max. 150 ppm
Rated current 44.1 A
Fe (iron) max. 0.1 ppm
Power supply wire gauge 6 AWG
SiO2 (silica) max. 13 ppm
Conductor insulation rating 194°F / 90°C
NH2Cl (monochloramine) max. 0.4 ppm
240V 3PH 60Hz *
Temperature max. 104°F / max. 40°C
Rated power consumption 21.0 kW
* See connection positions diagram, p. 2.
Rated current 50.6 A
NOTICE: The owner/operator/purchaser must ensure that the water quality
Power supply wire gauge 6 AWG requirements are met. Otherwise the original equipment warranty is void.
Conductor insulation rating 194°F / 90°C
* Prepared for connection to an energy optimizing system.
3
_CE Williams MS Page: 105
Convotherm C4 ET 6.20ES Item #39
Emissions
Water consumption
Accessories
C4eT 6.20 ES
Emissions ACCESSORIES
Heat emission (For more detailed information, please refer to the Accessories brochure.)
Latent 3400 BTU/h
Sensitive 4300 BTU/h Stacking kit
Drain temperature max. 140°F / 60°C
Combinations allowed 6.20 on 6.20
Decibel rating max. 70 dBA 6.20 on 10.20
If combining two electrical units
9758232_04 ENG_USA 05/15. © 2015 Manitowoc. Please note that the product is being continuously improved and that, as a result, these specifications are subject to change without notice.
Select the “stacking kit for Convotherm 4 electrical units”
Water consumption
If combining one electrical unit and one gas unit in a stack
Water connection A* ing kit
Average consumption for cooking 1.35 gph Select the “stacking kit for Convotherm 4 electrical units” if:
Required flow rate 0.16 gpm Bottom combi steamer EB/ES
Water connections A, B Top combi steamer GB/GS
Average consumption for cooking** 2.01 gph Select the “stacking kit for Convotherm 4 gas units” if:
Required flow rate 3.96 gpm Bottom combi steamer GB/GS
* Values intended as guide for specifying the water treatment system. Top combi steamer EB/ES
** Incl. water required for cooling the wastewater.
NOTICE: See connection positions diagram, p. 2.
Equipment stand
Standard support surface height 26.38"
Please note:
Please refer to the Installation manual for further technical data
and for instructions on installation and setup.
Convotherm reserves the right of design improvement or
modification, as warranted.
There are numerous federal, national and local laws, regulations
and standards. It is the responsibility of the owner and installer
to observe these laws, regulations and standards (e.g. fire
regulations and health and safety standards).
Convotherm combi steamers are built to comply with the
applicable standards for manufacturers.
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 3/8" 1
Model: QT1+CR
Part #: 160-52080
Snapshot
Application
System Benefits
STEAM & COMBI OVENS - For the reduction of
• Reduces maintenance frequency and cost, and extends chloramines, chlorine and sediment.
equipment life.
• Inlet shut-off valve makes filter replacement quick and • Detailed installation, operation and maintenance
simple. manual included with each system.
Model: QT1+CR
Part #: 160-52080
Specifications
System
Dimensions ”21h x 10.1”w x 4.3”d
(Height x Width x Depth, Inches)
Replacement Media
Model Description Part Number Qty
CTO-Q10 Pre/Post-Filter 300-05828 1
CTO-QCR Chloramine Filter 300-05831 1
Options
Model Description Part Number
Flush Valve Kit QT Flush Valve Kit 160-52912
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
1 208/240 60 3 44.1/50.6 15.9/21.0
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 3/4" 3/4" 1 2"
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 3/8" 1
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
1 208 60 3 Direct 30.0 10.4 3/4
2 208 60 3 30.0
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-09-20 FROM TAYLOR ADAMS, THIS
ITEM HAS BEEN APPROVED.
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
1 208‐240 60 3 Direct 29.8‐34.4 10.7‐14.3
2 208‐240 60 3 Direct 29.8‐34.4 10.7‐14.3
ELECTRICAL 1 REMARKS
Top Steamer
ELECTRICAL 2 REMARKS
Bottom Steamer
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 3/4" 1 1‐1/2"
2 3/4" 2
PLUMBING 1 REMARKS
C1 for Reservoir, Common Drain for C1 & C2
PLUMBING 2 REMARKS
C2 for Condenser
Project
Quantity
Approved
Boilerless Convection Steamer, Automatic Water Fill &
Date
Drain, Two 12 kW Boiler-Free Counter Type Design
DRAIN CONNECTION** D
1.5" NPT-M
Do not connect other units to this
drain.
Drain line must be vented.
Do not connect the appliance’s
drain connection to any drain
material that cannot sustain 140°.
OPERATING
CLEARANCES
3" Left, 3" Right and 4" Rear.
SERVICE CLEARANCES
12" on control side. Contact factory
for variances to clearances.
36.95"
939mm CONTROLS**
APPROX.
SureCook 60-minute electro
mechanical timer with load
compensating feature.
Two function control switch for Timed
Cooking, Continuous Steaming and
Holding.
APPROVALS
UL and CUL listed, classified to
NSF#4 and Energy Star.
67.20"
1707mm
40.07" 40.57"
34.51" 1018mm C2 1030mm
877mm
C1
7.73" 8.39"
6.01" 196mm 213mm
153mm D
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L/NSF#4 and CSA (AGA, CGA). (NOT TO SCALE)
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 3/8" 1
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
Specification Sheet
Worktables with Backsplash
Short Form Specifications
Eagle worktables, Spec-Master® series, model ____________. and Stainless Steel Base
Top constructed of 14 gauge 300 series stainless steel with
11⁄2˝ roll on front, 41⁄2˝ backsplash, and sides turned down 90°.
with Undershelf
Adjustable undershelf constructed of 18 gauge 300 series
stainless steel with marine edge. Top reinforced with stainless
—Spec-Master® Series
steel hat channels and sound deadened. Constructed with uni- MODELS:
lok® patented gusset system with the gussets recessed into the T2424SE-BS T24108SE-BS T3072SE-BS T3660SE-BS
hat channels to reduce lateral movement. 15⁄8˝-diameter T2430SE-BS T24120SE-BS T3084SE-BS T3672SE-BS
stainless steel legs, with stainless steel gussets and T2436SE-BS T24132SE-BS T3096SE-BS T3684SE-BS
1˝ stainless steel adjustable bullet feet. T2448SE-BS T24144SE-BS T30108SE-BS T3696SE-BS
T2460SE-BS T3030SE-BS T30120SE-BS T36108SE-BS
T2472SE-BS T3036SE-BS T30132SE-BS T36120SE-BS
Spec-Master® Series Worktables with Backsplash and Stainless Steel Base with Undershelf
T2484SE-BS T3048SE-BS T30144SE-BS T36132SE-BS
T2496SE-BS T3060SE-BS T3648SE-BS T36144SE-BS
Tabletop
• Patented uni-lok® gusset system (patent #5,165,349): gussets
are recessed into hat channel, reducing lateral movement.
• Top reinforced with welded-on hat channel.
• Sound-deadened between top and channels.
• 41⁄2˝ (114mm)-high 90° backsplash with 1˝ (25mm) turn at 90°.
• 11⁄2˝ (38mm)-diameter 180° rolled edge on front. Ends are
turned down 90°, providing for flush installations when required.
• 14 gauge 300 series polished stainless steel.
Adjustable Undershelf
• Heavy gauge stainless steel.
• Gusset welded to each corner.
Patented uni-lok® System
(Patent No. 5,165,349) • Heavy duty marine edge design.
Legs—15⁄8˝ (41mm)-diameter
• Tables 96˝ (2438mm) and longer come with six legs or more.
• Heavy gauge stainless steel.
• 1˝ (25mm) adjustable stainless steel feet.
Options / Accessories
Drawer Duplex receptacles
Lock Pot rack
Casters Sink
Stainless steel bullet feet Additional undershelf
Overshelves Stabilizer Bar (for 30˝-
Power strip (for material handling) and 36˝-wide tables)
TOP VIEW
FRONT VIEW SIDE VIEW
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Printed in U.S.A.
Foodservice Division: Phone 800-441-8440 ©2015 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100 Rev. 10/15
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
_CE Williams MS Page: 120
Metro 2448NK3 Item #45
® Item # ______________________________________________
®
Job ________________________________________________
5PCB 5PC
11.20
Job ________________________________________________
11.20
®
METRO®
STEM CASTERS
Dimensions
Standard Casters — Stem Type
Wheel Load Approx.
Diameter Face Rating Pkd. Wt.
Cat. No. (in.) (mm) (in.) (mm) (lbs.) (kg) Type Wheel Tread (lbs.) (kg)
1
4LD 4 102 /2 12 125 56 Stem/Swivel Resilient 11/2 .6
1
5LD 5 127 /2 12 125 56 Stem/Swivel Resilient 2 .9
5M 5 127 11/4 32 200 90 Stem/Swivel Resilient 21/2 1.1
5MB 5 127 11/4 32 200 90 Stem/Brake Resilient 23/4 1.2
5MR 5 127 11/4 32 200 90 Stem/Rigid Resilient 31/2 1.5
5MDA 5 127 11/4 32 250 111 Stem/Swivel High Modulus Donut 21/2 1.1
5MDBA 5 127 11/4 32 250 111 Stem/Brake High Modulus Donut 25/8 1.17
5MDRA 5 127 11/4 32 250 111 Stem/Rigid High Modulus Donut 23/8 1.08
5MP 5 127 11/4 32 300 135 Stem/Swivel Polyurethane 21/8 .94
5MPB 5 127 11/4 32 300 135 Stem/Brake Polyurethane 21/4 1
5MPR 5 127 11/4 32 300 135 Stem/Rigid Polyurethane 2 .9
NOTE 1: Stem casters are shipped with donut bumper at no additional charge.
NOTE 2: Rigid casters are held in position by a connecting channel. When ordering rigid casters, shelf width must be known.
NOTE 3: Load Height for all 5M, 5MD and 5MP casters — 63/32" ± 1/16" (155 ± 1.5mm).
NOTE 4: Load Height for 4LD caster — 45/8" ± 1/16" (118 ± 1.5mm).
NOTE 5: Load Height for 5LD caster — 55/8" ± 1/16" (143 ± 1.5mm).
NOTE 6: Brakes are foot-operated.
5MDGSA 5 122 11/4 32 150 68 Swivel High Modulus Donut 21/2 1.1
5MDBGSA 5 122 11/4 32 150 68 Brake High Modulus Donut 25/8 1.17
5MDRGSA 5 122 11/4 32 150 68 Rigid High Modulus Donut 23/8 1.08
5MPGSA 5 127 11/4 32 300 135 Swivel Polyurethane 21/8 .94
5MPBGSA 5 127 11/4 32 300 135 Brake Polyurethane 21/4 1
5MPRGSA 5 127 11/4 32 300 135 Rigid Polyurethane 2 .9
NOTE 1: Stem casters are shipped with donut bumper at no additional charge.
NOTE 2: Rigid casters are held in position by a connecting channel. When ordering rigid casters, shelf width must be known.
NOTE 3: Load Height for all 5MD and 5MP casters — 63/32" ± 1/16" (155 ± 1.5mm).
NOTE 4: All casters are grease sealed with zerk fittings in swivel and axle.
Casters (Stem Type)
Manufactured by:
®
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
Racks
Eagle Wall Mounted Rack, model __________________.
Constructed of 3⁄16˝ x 2˝ (aluminum or stainless steel) flat bar
bolted together. Furnished with one stainless steel double
Ceiling mounted (non-NSF)
prong sliding pot hook every 12˝, and provided with stainless
• Racks are triple-bar construction.
steel mounting brackets.
• Supported with plated chain hangers supplied.
• Available in stainless steel or aluminum.
• Provided with double-pronged pot hooks.
Wall Mounted
• Racks are double-bar construction.
• Supplied with die-formed stainless steel brackets.
• Available in stainless steel or aluminum.
• Provided with double-pronged pot hooks.
Table Mounted
• Racks are triple-bar construction.
• Front-to-back adjustable crossbracing, plus adjustable
undershelf.
• 15⁄8˝ (41mm) tubular stainless steel supports extend
through tabletop and are secured to adjustable undershelf.
Units 108˝ (2743mm) and longer have three supports.
• Provided with double-pronged pot hooks.
• Available in stainless steel or aluminum.
Options / Accessories
Additional sliding hooks
All-welded construction
12˝-wide adjustable shelves (for Table Mounted Racks)
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Printed in U.S.A.
Foodservice Division: Phone 800-441-8440 ©2014 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100 Rev. 06/14
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
_CE Williams MS Page: 126
Eagle Group 300696 Item #46
utility rack
Patented
uni-lok®
post
System
(Patent No.
overshelves 5,165,349)
utility rack
mounting
plate
Flex-Master® Overshelf System for Stainless Steel Worktables
OVERSHELVES POSTS
16/430 16/304 width length weight CHROME STAINLESS height weight
model # model # in. mm in. mm lbs. kg model # model # in. mm lbs. kg
411030 421030 10˝ 254 30˝ 762 10.1 4.6 418202 418002 18˝ 457 1.7 0.8
411036 421036 10˝ 254 36˝ 914 12.1 5.5 430202 430002 30˝ 762 2.4 1.1
411048 421048 10˝ 254 48˝ 1219 13.1 6.0 448202 448002 48˝ 1219 5.6 2.5
411060 421060 10˝ 254 60˝ 1524 15.2 6.9
411072 421072 10˝ 254 72˝ 1829 17.2 7.8
411084 421084 10˝ 254 84˝ 2134 19.3 8.8 UTILITY RACKS
for overshelf
411096 421096 10˝ 254 96˝ 2438 21.3 9.7 length weight
411010 421010 10˝ 254 108˝ 2743 23.4 10.6 model # in. mm lbs. kg
411012 421012 10˝ 254 120˝ 3048 25.4 11.5
411013 421013 10˝ 254 132˝ 3353 27.4 12.5 PRT30-C 30˝ 762 1.7 0.8
411014 421014 10˝ 254 144˝ 3658 29.4 13.4 PRT36-C 36 914 1.9 0.9
411230 421230 12˝ 305 30˝ 762 11.1 5.1 PRT48-C 48˝ 1219 2.1 1.0
411236 421236 12˝ 305 36˝ 914 12.3 5.6 PRT60-C 60˝ 1524 2.5 1.1
411248 421248 12˝ 305 48˝ 1219 14.8 6.7 PRT72-C 72˝ 1829 2.9 1.3
411260 421260 12˝ 305 60˝ 1524 17.2 7.8 PRT84-C * 84˝ 2133 4.1 1.9
411272 421272 12˝ 305 72˝ 1829 19.7 9.1 PRT96-C * 96˝ 2438 4.9 2.2
411284 421284 12˝ 305 84˝ 2134 22.1 10.0 PRT108-C * 108˝ 2743 5.6 2.5
411296 421296 12˝ 305 96˝ 2438 24.6 11.2 PRT120-C * 120˝ 3048 6.2 2.8
411210 421210 12˝ 305 108˝ 2743 27.0 12.3 PRT132-C ** 132˝ 3353 6.9 3.1
411212 421212 12˝ 305 120˝ 3048 29.5 13.4 PRT144-C ** 144˝ 3658 7.6 3.5
411213 421213 12˝ 305 132˝ 3353 31.5 14.3
* Provided in two sections.
411214 421214 12˝ 305 144˝ 3658 33.5 15.2 ** Provided in three sections.
POT HOOKS
weight MOUNTING PLATE
model # lbs. kg model # 311915
300696 0.2 0.1
pot hook
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Printed in U.S.A.
Foodservice Division: Phone 800-441-8440 ©2009 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100 Rev. 05/09
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
_CE Williams MS Page: 128
Custom CUSTOM Item #47
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 1/2" 1/2" 1
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 1 2"
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
1 115 60 1 13.5
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 3/8" 1 3/4"
2 2 3/4"
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-09-20 FROM TAYLOR ADAMS, THIS
ITEM HAS BEEN APPROVED.
B322S * Contact Scotsman for bin top requirements. ** Add 6” Height for bin legs.
2018
• 5 years parts on the compressor and condenser.
DOE
• Warranty valid in North, South & Central
Small Cube Medium Cube America for commercial installations.
7/8” x 7/8” x 3/8” 7/8” x 7/8” x 7/8” • Contact factory for warranty in other regions.
9001:2015
(2.22 x 2.22 x .95 cm) (2.22 x 2.22 x 2.22 cm) • Residential Applications: 1 year parts and labor
8.3
3.25
3/4" FPT
1/2" FPT DRAIN 26
CONDENSER 10.25
DRAIN
22.00 REF.
WATER COOLED REMOTE COOLED 3/4" FPT
DRAIN PLAN VIEW
BACK VIEW BACK VIEW
57.6
63.9
22.67
25.15
.88" DIA
ELECTRICAL
ACCESS LOUVER AND
C0522 - 500lb Cube Ice Machine
REMOVABLE FILTER
AC UNITS ONLY
INTAKE
EXHAUST AIR
AIR
3/8" FPT
WATER
INLET
3/4" FPT
AIR COOLED DRAIN LEFT SIDE VIEW FRONT VIEW
3.6
BACK VIEW 1.43
Specifications
Water Usage
Max. Fuse Size Energy Consumption Gallons/100 lb (liters/45.4 kg)
Model Number Condenser Basic Electrical or HACR Circuit Circuit Min. Circuit kWh/100 lb (45.4 kg) Potable Condenser
Cube Size: medium or small Unit Volts/Hz/Phase Breaker (amps) Wires Ampacity 90˚F(32˚C)/70˚F(21˚C) 90˚F(32˚C)/70˚F(21˚C)
C0522MA-1 Air 115/60/1 15 2 13.5 5.94 18.0/68.2 -
med.
Shipping Weight:
160 lb / 73 kg
BTUs per hour:
7,900
Operating Requirements
Refrigerant: R-404A Minimum Maximum
Air Temperatures 50°F (10°C) 100°F (38°C)
Water Temperatures 40°F (4.4°C) 100°F (38°C)
Remote Cond. Temps -20°F (-29°C) 120°F (49°C)
Water Pressures 20 PSIG (1.4 bar) 80 PSIG (5.5 bar)
Electrical Voltage -5% +10%
Features
New sleek, contemporary styling. A perfect match to Prodigy Plus ® cube ice machines and
other Scotsman ice machines.
Convenient, built-in scoop holder.
Easily removable baffle, no tools required for cleaning.
Lightweight.
Unique recessed drain fitting for maximum installation flexibility.
Corrosion resistant.
Spring loaded door with hidden hinges for easy opening and closing (except for B230P).
Available in metallic finish or durable rotocast plastic.
Certification
Storage Bins
B530S show with optional KLP8S legs.
DESIGNED
ENGINEERED
ASSEMBLED
USA
IN THE
9001:2015
Storage Capacity
B322S B330P B530P/S B842S B948S
Polyurethane
Insulation Bin Interior Warranty
D J
B322S, B330P, B530P/S, B842S, B948S -
K
N F
M G
L H
Dimensions
Storage Bins
Model # A B C D E F G H J K L M N P R S T
B322S 28.23 34 45.5 61.24 18 3.88 25 32.75 44 6 22 15.5 3.25 22.5 11 6 .75 NPT
B330P 28.15 34 45.5 47.24 18 3.33 25 32.42 31 6 30 23.5 3.08 30.5 15 6 .75 NPT
B530P/S 28.15 34 45.5 61.24 18 3.09 25 31.93 44 6 30 23.5 2.83 30.5 15 6 .75 NPT
B842S 28.07 34 45.5 61.87 18 3.88 25 32.75 44 6 42 35.5 3.25 42.5 21 6 .75 NPT
B948S 28.05 34 45.5 61.24 18 3.88 25 32.75 44 6 48 41.5 3.25 48.5 24 6 .75 NPT
with
Water Filters
SSM Plus and Aqua Patrol Plus ® Water Filtration Systems
®
Features
SSM Plus
Extends the life of your Scotsman machine and provides cleaner, more consistent ice.
® Now with AquaArmor with AgION ® , a silver-based anti-microbial compound that reduces the
growth of bacteria, microorganisms, algae, mold and slime on ice machine surfaces, preventing
premature clogging.
Ultrafine half-micron filtration, combined with food-grade polyphosphate, assures that chlorine,
off-tastes, odors and particles stay out of your ice.
Filtration can reduce unscheduled water-related maintenance calls by as much as 40%.
Easy to install and maintain.
AquaPatrol Plus ®
Leaves chlorine in water to keep machine cleaner longer.
Polyphosphate feed to inhibit scale build up.
Easy to install and maintain.
Water Filters
Tighter pore size now eliminates more undesirable compounds.
New smaller footprint gives operations more flexibility.
The SSM and AquaPatrol Plus filter and replacement cartridge have been tested and listed by
NSF only for the functions listed above. Check for compliance with state and local law and
regulations. Do not use where the water is micro-biologically unsafe, or with water of unknown
quality without adequate disinfection before or after the unit. Can be used on water that may
AP3-P contain filterable cysts.
Certification Warranty
15
• Contact factory for warranty in other regions.
• Residential Applications: 1 year parts and labor
INLET
INLET
3/4” MNPT INLET OUTLET
3/8” FNPT OUTLET
3/4” FNPT 3/4” FNPT
3/8” FNPT
H
D SSM2-P & D
H
AP2-P SC10 -A
D H
W W
OUTLET
3/4” FNPT
INLET OUTLET
3/4” FNPT 3/4” FNPT
INLET
3/4” MNPT
SSM1-P & SSM3-P &
AP1-P AP3-P H
D H
SC20 -A
Specifications
Water Filters
AP2-P 16.6 5.5 19.26 Double System for Cubers up to 650 lb (295 kg) and flakers, nuggets and 4.2
nugget dispensers up to 1,200 lb (544 kg).
AP3-P 21 5.5 19.26 Triple System for Cubers over 1,300 lb (544 kg) 6.3
Pre-Filters
SC10-A 5.16 5.5 12.44 Single System for Cubers up to 650 lb (295 kg) and flakers, nuggets and 5
Coarse
Shipping Accessories
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
Cord &
1 208‐240 60 1 6‐20P 6.0
Plug
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-10-01 FROM ROBERT BRYANT, MR.
WALTER CAMPBELL APPROVED DELFIELD INSTEAD OF
CONTINENTAL WITH 5" CASTERS. "NO SUBSTITUTE
ACCEPTED."
Project ___________________________________
Quantity _________________________________
Date _____________________________________
Coolscapes™ Heated Pass-Thru
Models
CSHPT1-S CSHPT2-S
CSHPT1-SH CSHPT2-SH
CSHPT1P-SH
Specifications
Heating system: All components are mounted to the top
cabinet ceiling, outside the food zone. Cabinets are designed
to maintain temperatures between 120ºF and 200ºF. Heating
elements are located behind the vertical ducts. The design of
the heater, which is full length of the vertical duct, allows for
optimal air flow and energy efficiency. Fan motor is mounted
outside of the heated compartment. System is controlled
using an electronic temperature control.
SIDE VIEW
ALL MODELS
Specifications
SHELF Btu/Hr
Volume No. of Ship Nema
Model V/Hz/Ph Amps CAPACITY Unit H.P. System
Cu. Ft. Shelves Weight Plug
SQ. FT. Cap
CSHPT1-S
208-240/60/1 6 23 11.5 3 N/A 6-20P
CSHPT1-SH
CSHPT2-S
208-240/60/1 10.5 50 25.5 6 N/A 6-20P
CSHPT2-SH
Delfield reserves the right to make changes to the design or specifications without prior notice.
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
115/208‐
1 60 1 7.8
230
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-10-01 FROM ROBERT BRYANT, MR.
WALTER CAMPBELL APPROVED DELFIELD WITH 5" CASTERS
INSTEAD OF CONTINENTAL. "NO SUBSTITUTES ACCEPTED."
WARMERS
DL1WE-SS DL2WE-SS DL3WE-SS
One Section Two Section Three Section Digital Thermometer
DL1WE-SS Exterior Temperature Control
CHARACTERISTICS Reach-In Pass-Thru Reach-In Pass-Thru Reach-In Pass-Thru
DIMENSIONAL DATA
Net Capacity (cu. ft.) 22 22 52 52 75 75
Width, Overall (in.) 281/2 281/2 57 57 851/2 851/2
Depth, Overall (Incl. Hdls.) (in.) 351/2 39 351/2 39 351/2 39
Depth (Less Door(s)) (in.) 32 32 32 32 32 32
Depth (Doors(s) Open 90°) (in.) 58 84 58 84 58 84
831/4"
Clear Door Width (in.) 217/8 217/8 217/8 217/8 217/8 217/8
Clear Full-Door Height (in.) 585/8 585/8 585/8 585/8 585/8 585/8
Clear Half-Door Height (in.) 271/2 271/2 271/2 271/2 271/2 271/2
Height, Overall (Inc. 6" Legs)(in.) 831/4 831/4 831/4 831/4 831/4 831/4
No. of Full Door(s) 1 2 2 4 3 6
No. of Half Door(s) 2 4 4 8 6 12 6"
6" Adj. Legs 32"
No. of Shelves 3 3 6 6 9 9
28 1/2" 34"
Shelf Area (sq. ft.) 20.4 20.4 40.8 40.8 61.2 61.2
35 1/2"
Tray Slide Capacity (Half) 12 ea. 12 ea. 12 ea. 12 ea. 12 ea. 12 ea.
Tray Slide Capacity (Full) 25 ea. 25 ea. 25 ea. 25 ea 25 ea 25 ea Digital Thermometer
ELECTRICAL DATA
Cabinet Specifications 115/208-230/60/1 115/208-230/60/1 115/208-230/60/1 115/208-230/60/1 115/208-230/60/1 115/208-230/60/1
Digital Thermometer
Note: All specifications subject to change without notice. DL3WE-SS Exterior Temperature Control
83 1/4"
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-10-01 FROM ROBERT BRYANT, MR.
WALTER CAMPBELL APPROVED DELFIELD INSTEAD OF
CONTINENTAL WITH 5" CASTERS. "NO SUBSTITUTE
ACCEPTED."
Pass-Thru Refrigerator
Item No: Quantity:
REFRIGERATION SYSTEM
Environmentally-safe R-134a refrigerant
Self contained, performance-rated “plug”
refrigeration system
Refrigeration system is readily accessible on top of
cabinet, separate from the “food zone” to increase
storage capacity
Automatic, hot gas condensate evaporator
CABINET ARCHITECTURE
3” non-CFC polyurethane foam insulation
Chrome-plated flow line handles
Cam action, lift off hinges
Self-closing doors
Magnetic snap-in door gaskets
Cylinder lock in door
Heavy-duty, epoxy-coated steel shelves
Options and Accessories Adjustable 6” stainless steel legs
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
DIMENSIONAL DATA
Net Capacity (cu. ft.) 52 (1472 cu l)
Width, Overall (in.) 57 (1448 mm)
Depth, Overall (incl. handles) (in.) 38 3/4 (984 mm) 77 1/4” 58 5/8” 21 7/8”
(1962 mm) (1489 mm) (556 mm)
Depth [less doors] (in.) 32 (813 mm) DOOR OPENING DOOR OPENING
ELECTRICAL DATA
Voltage (int’l) 115/60/1 (220/50/1)
Feed Wires (incl. ground) 3
Total Amps (int’l) 6.9 (5.3)
10 ft. Cord/Plug [attached] (int’l) Yes (No)
SHIPPING DATA
Height - Crated (in.) 85 1/2 (2172 mm) 58 1/8”
(1476 mm)
Width - Crated (in.) 64 (1626 mm)
Depth - Crated (in.) 42 (1067 mm)
Volume - Crated (cu. ft.) 133 (3766 cu l)
Weight Std - Crated (lbs.) 645 (293 kg)
Weight SS - Crated (lbs.) 715 (324 kg)
SIDE VIEW
Weight Std - Uncrated (lbs.) 465 (211 kg)
IMPORTANT NOTE: If the cabinet is located directly against a wall and/or under a low ceiling, a minimum
Weight SS - Uncrated (lbs.) 545 (247 kg) clearance of 12” is required.
* Rating @ +25°F evaporator, 90°F ambient
Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit. REFRIGERATION SYSTEM CABINET CONSTRUCTION
A “performance rated”, air-cooled, hermetically All materials are of top quality, assembled to con-
sealed, capillary-type refrigeration system is in- form with strict quality-assurance requirements.
stalled on the top of each refrigerator. Plasticized The cabinet front is constructed of heavy-gauge
fin coil and air circulation fans are contained within polished stainless steel for durability. All cabinet
a concealed “plug”-type insulated housing, read- joints and seams are sealed vapor-tight. Case is of
ily accessible on top of the cabinet and separate all metal, welded construction and internally sup-
Equipped with one NEMA-5-15P Plug from the food zone to increase food storage ca- ported and braced for a rigid unit construction.
(varies by country) pacity. The entire “plug” system is fully charged Cabinet design eliminated overlapping panels with
with environmentally safe R-134a refrigerant and raw edges. Cabinet body is insulated with non-CFC,
05/27/10
mounted on a sturdy steel, rail-type base which can foamed-in-place polyurethane foam with an aver-
be easily removed if freezer conversion is desired. age thickness of 3 inches to ensure increased ener-
Refrigerators are designed to maintain 38°F-40°F gy efficiency. Full-length louvered air grille located
Toll-Free: 800-523-7138 above the doors allows equal air circulation to the
(3°-5° Centigrade) while operating with an unre-
Phone: 215-244-1400 condensing unit. Easily removable, low-wattage,
stricted air supply in a maximum ambient tempera-
Fax: 215-244-9579 ture of 100°F. All condensate water is evaporated anti-sweat door heaters concealed by a non-me-
by an automatic, non-electric, corrosion-resistant tallic, non-conductive, high-impact thermal breaker
539 Dunksferry Road condensate evaporator. A strict quality-assurance strip eliminate condensate build-up on the cabinet
Bensalem, PA 19020 team inspects all materials and components to cer- front. Automatic interior lighting is activated by
www.continentalrefrigerator.com tify that each model conforms to the most exacting an easily accessible interior switch. Cabinets are
standards. All models are factory performance- equipped with 6 inch adjustable stainless steel legs.
tested for a minimum of 16 hours prior to crating.
Due to our continued efforts in developing innovative DOOR CONSTRUCTION
products, specifications subject to change without notice. INSULATION Solid hinged door shells are constructed of heavy-
All cabinet walls, top and bottom have high density, gauge stainless steel and are internally braced and
foamed-in-place, non-CFC polyurethane insulation. urethane-foam-insulated for rigidity. Door corners
are welded construction and polished. Replaceable
SHELVING snap-in door gaskets are self-adjusting, heavy-
Shelves are designed for heavy-duty use with .306” duty, magnetic type. Door handles and hinges are
®
diameter frame and brace members and .140” di- chrome-plated and non-corrosive. Doors are pro-
MADE IN THE U.S.A. ameter fill wires spaced 3/4” apart. Shelves are vided with built-in cylinder locks which are keyed
welded steel and epoxy-coated for a durable, long, alike. Hinges are cam action, lift-off type featuring
© Copyright 2013. Continental Refrigerator. rust-free service life. Adjustments are in 1 inch in- positive safety stop at 120 degrees.
A Division of National Refrigeration & Air Conditioning Products, Inc. crements and a wide door opening allows the use
of a variety of optional pan and tray slide types. DL2RE-PT (8/27/13)
VERIFY QUANTITY
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
1 1/3
Cord &
2 115 60 1 5‐15P 6.9
Plug
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-10-01 FROM ROBERT BRYANT, MR.
WALTER CAMPBELL APPROVED DELFIELD INSTEAD OF
CONTINENTAL WITH 5" CASTERS. "NO SUBSTITUTE
ACCEPTED."
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
115/208‐
1 60 1 7.8
230
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-10-01 FROM ROBERT BRYANT, MR.
WALTER CAMPBELL APPROVED DELFIELD INSTEAD OF
CONTINENTAL WITH 5" CASTERS. "NO SUBSTITUTE
ACCEPTED."
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-09-20 FROM TAYLOR ADAMS, THIS
ITEM HAS BEEN APPROVED.
Project ___________________________________
UTS: Mobile Tubular Frame Tray & Silver Carts With Cylinders
Item _____________________________________
Quantity _________________________________
UTS
CSI Section 11400
Approved ________________________________
Date _____________________________________
Mobile Tubular Frame Tray & Silver Carts With Cylinders
Models
• UTS-1 Tray & silver cart with molded fiberglass tray shelf
• UTS-1SS Tray & silver cart with 14-gauge stainless steel tray shelf
UTS-1
Specifications
Vertical frame shall be integrally welded 16-gauge 1.00”
(2.5cm) outside diameter stainless steel tubing, attached to
a bottom frame of similar stainless steel tubing. Unit shall
have (4) 4.00” (10cm) diameter polyolefin swivel casters (all
locking), and a non-marking extruded vinyl sleeve bumper at
each corner.
Plan View
UTS-1 & UTS-1SS
Mobile Tubular Frame Tray & Silver Carts With Cylinders
46.68”
(119cm)
35.75”
(91cm)
6.82”
(17cm)
5.13”
(13cm)
35.25” 23.37”
(90cm) (59cm)
Specificaions
Model Shelf Dimensions Capacity Per Shelf Ship Weight
(Length X Depth)
UTS
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
1 1/4
2 115 60 1 4
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-09-20 FROM TAYLOR ADAMS, THIS
ITEM HAS BEEN APPROVED. PROVIDE UNIT WITH BUMPERS.
Item No.
Quantity
CABINET CONSTRUCTION
Standard construction includes the lid, door, adjustable hinges, and
door latches made from stainless steel. Balance of exterior is white
finish on steel. One-piece, reinforced stainless steel floor for maxi-
mum milk crate support. Balance of interior is galvanized steel.
Heavy-duty, epoxy coated steel wire floor racks are provided for
added floor protection. Floor drain is centrally located for easy
cleaning, connecting to drain hose with hose adapter. ST34N (white exterior shown)
Models are also offered with stainless steel exterior in place of white
finish on steel. A stainless steel interior is optionally available.
Additional options include wrap around and corner bumpers.
REFRIGERATION
Refrigeration system uses R404A refrigerant, which is CFC and
HCFC-free for compliance with environmental safety concerns.
ELECTRICAL
Units wired at factory and ready for connection to a 115/60/1 phase,
15 amp dedicated outlet. 8’ long cord and plug set included.
ST49N (white exterior shown)
SPECIAL FEATURES
One-piece, reinforced stainless steel floor for maximum sup-
port of milk crates.
Stainless options available. ELECTRICAL CONNECTION
Units pre-wired at
factory and include 8’
long cord and plug
set.
Available From:
Location Quantity
PLAN VIEWS
ST SERIES School Milk Coolers
Models: ST34N, ST49N, ST58N
MODEL ST34N-S ST49N-S ST58N-S
Number of doors/lids 4 4 4
CASE CAPACITIES
ELECTRICAL DATA
REFRIGERATION DATA
WEIGHT DATA
ST49N-S
ELECTRICAL CONNECTION
Units pre-wired at factory and include 8’
long cord and plug set.
ST58N-S
BEVERAGE-AIR® CORPORATION
3779 Champion Blvd. • Winston-Salem, NC 27105 USA • (336) 245-6400 • Fax (336) 245-6453 • (888) 845-9800 • www.beverage-air.com
Specifications are subject to change without prior notice. 04/16
_CE Williams MS Page: 156
Custom CUSTOM Item #56
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
1 1/4
2 115 60 1 4
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-09-20 FROM TAYLOR ADAMS, THIS
ITEM HAS BEEN APPROVED. PROVIDE UNIT WITH BUMPERS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
1 1/4
2 115 60 1 4
✔
APPROVED REVISE REJECTED
NOTES:
PER EMAIL DATED 2018-09-20 FROM TAYLOR ADAMS, THIS
ITEM HAS BEEN APPROVED. PROVIDE UNIT WITH BUMPERS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 1/2" 1/2" 1
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 B-0133-B
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
Job Name__________________________Date_________
12 7/16"
Model Specified_____________________ Quantity______
315mm
Customer/Wholesaler______________________________
Contractor_______________________________________
Architect/Engineer_________________________________
Finger Hook
Quarter-Turn Eterna
Cartridges w/ Spring
Checks & Lever Handles 3 3/4"
w/ Color Coded Indexes
3 11/16" 95mm
94mm
14 1/16" 2"
8" [51mm]
203mm 357mm Flanges w/
Adjustable From 1/2" NPT
7 3/4" to 8 1/4" Mounting Female Inlets
[197mm to 210mm] Surface
Drawn: DHL Checked: JRM Approved: JHB Date: 08/27/15 Scale: 1:8 Sheet: 1 of 2
_CE Williams MS Page: 175
T&S Brass B‐0133‐B Item #73
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 B-0133-B
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
ITEM SALES NO. DESCRIPTION
NO.
1 B-0107 1.42 GPM Spray Valve
2 010476-45 #27 Washer
7 3 000907-45 Spray Valve Hold Down Ring
4 002987-40 Grip Handle
5 001014-45
Washer, B-0100 Hose Barrel
2 44" Flexible Stainless Steel, Less
6 B-0044-H2A Handle
8 7 000888-45 EasyInstall Overhead Spring
8 000821-40 Spring Body
9
9 B-0109-01 6" Wall Bracket
6 10 10 004R Finger Hook
11 000369-40 3/8" NPT x 18" Riser
EasyInstall Kit: Nut, Bushing, O-ring
11 12 EZ-K & Lock Washer
13 001065-45 O-Ring
14 014200-45 Star Washer, Anti-Rotation
5 Quarter-Turn Eterna Cartridge, LTC
15 002711-40 w/ Spring Check, Handle, Index &
12 Screw
4 16 000922-45 Lever Handle Screw
3 13 17 001660-45 Blue Index-CW
18 001638-45 Lever Handle
2 24 14 Quarter-Turn Eterna Cartridge, LTC
19 012442-40 w/ Spring Check
1 23 15 20 001019-45 Coupling Nut Washer
21 00AA 1/2" NPT Female Eccentric Flange
16
Quarter-Turn Eterna Cartridge, RTC
22 012443-40
17 w/ Spring Check
23 001661-45 Red Index-HW
22 18
Quarter-Turn Eterna Cartridge, RTC
24 002712-40 w/ Spring Check, Handle, Index &
Screw
19 20 21
Drawn: DHL Checked: JRM Approved: JHB Date: 08/27/15 Scale: NTS Sheet: 2 of 2
_CE Williams MS Page: 176
T&S Brass B‐0230‐K Item #73
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 B-0230-K
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
Job Name__________________________Date_________
Model Specified_____________________ Quantity______
Customer/Wholesaler______________________________
Contractor_______________________________________
Architect/Engineer_________________________________
Kit Contains
(2) of each Item
2 3/16"
56mm
1 5/8" 1 3/8"
41mm 36mm
Minimum
1 3/4"
44mm
1/2" NPT
Male Threads
Drawn: DHL Checked: JRM Approved: JHB Date: 03/13/14 Scale: 1:1 Sheet: 1 of 2
_CE Williams MS Page: 177
T&S Brass B‐0230‐K Item #73
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 B-0230-K
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
ITEM SALES NO. DESCRIPTION
NO.
1 000999-45 Brass Lock Washer
2 002954-45 Shank Lock Nut
3 013357-20 1/2" NPT x 1-5/8" Lg. Close Nipple
1 2 3
Drawn: DHL Checked: JRM Approved: JHB Date: 03/13/14 Scale: NTS Sheet: 2 of 2
_CE Williams MS Page: 178
Salvajor 300‐SA‐6‐ARSS‐LD Item #74‐75
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
1 3
2 208 60 3 Direct 8.8 3.17
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 1/2" 1 2"
3 HP Model 300
JOB: Item No.:
FOOD WASTE DISPOSER
SPECIFICATIONS
CORROSION RESISTANT BODY
Permanent molded from heat treated aluminum alloy.
EXTENDED LIP WATER SEAL
Protects the motor from damage by water.
TAPERED ROLLER BEARING
Provides longer motor life, quiet operation and
shock absorbing.
WATER COOLED MOTOR
Provides maximum efficiency and longer life.
QUIET OPERATION
Extra thick rubber mounting adaptor and drain
outlet isolates sound and eliminates vibration.
WASTE MIXING CHAMBER
Extra large to ensure proper mixture of water to waste.
Cone Assembly
TABLE CUT-OUT:
12” CONE - 12 7/8”
15” CONE - 15 7/8” ALL PIPING ½"
18” CONE - 18 7/8”
OPTIONAL
CONE COVER VACUUM
BREAKER
FOOD WASTE
DISPOSER
MSS MRSS
2" or 3” DRAIN
LEG SUPPORT – Single leg, adjustable. NOTE: Dimensions in parenthesis are in centimeters
(Specifications subject to change without notice)
ASSEMBLIES: (See Specification Sheet) Current specification details may be found online at www.salvajor.com
The Salvajor Company 4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA
1- 800 - SALVAJOR (816) 363 - 1030 FAX: 1 - 800 - 832 - 9373
www.salvajor.com Email: sales@salvajor.com service@salvajor.com
Manufacturers of Commercial Food Waste Disposing Systems since 1944 Printed in USA
Form No.S300 (06-17)
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
1 208 60 3
2 15
3 30
4 208 60 3
CLPS66eN-BAS
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
DISHWASHER
CLPS66eN-BAS DISHWASHER
■ Single, sloping scrap screen and deep basket
■ Stainless panels enclose perimeter and bottom
■ Door actuated drain closure
■ Single point electrical connection (three phase
only), does not include the booster heater
■ Convertible hot water or low temp final rinse
■ Vent fan and booster heater control
DIRECTION OF OPERATION
❑ Right to Left
❑ Left to Right
VOLTAGE
❑ 208/60/1 ❑ 240/60/1 ❑ 380/60/3
❑ 208/60/3 ❑ 240/60/3 ❑ 480/60/3
❑ 600/60/3 Shown with optional vent hoods
CLPS66eN-BAS
DISHWASHER 701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
THE CLeN SERIES WAREWASHER IS NOW STANDARD WITH MORE EFFICIENT FEATURES THAN EVER . . .
Inside and out the CLeN warewashers by Hobart are packed with standard components and patented design
innovations that make them the biggest value in the dishwasher industry.
CLPS66eN-BAS
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
DISHWASHER
CLPS66eN-BAS
DISHWASHER 701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
4 3/4"
11 1/4"
68 1/2"
20 1/2"
65 9/16"
8 7/8"
CL
MAY BE DRAINED TO
EITHER SIDE OF VALVE,
PLUG OPPOSITE SIDE.
65 1/2"
BOOSTER HEAT 30 KW
MINIMUM
SUPPLY MAXIMUM 58 1/2" FLUE FOR
ELEC. RATED
SPECS. AMPS CIRCUIT PROTECTIVE GAS HEAT
CONDUCTOR DEVICE
AMPACITY
200-240/50/3 80.2 90 90 WALL
380-415/50/3 53.2 60 60
200/50/3 80.8 90 90
208-240/60/3 80.2 90 90
208/60/3 83.9 90 90
240/60/3 80.2 90 90
380/60/3 42.5 60 60 14 1/2"
380-415/60/3 46.4 60 60
480/60/3 40.1 50 50 18 5/8"
600/60/3 33.7 40 40
3" MIN. FLUE
CLEARANCE
CLPS66eN-BAS
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
DISHWASHER
4 3/4"
11 1/4"
20 1/2"
68 1/2"
65 9/16"
R-L OPER
34"
CL
MAY BE DRAINED TO
EITHER SIDE OF VALVE,
PLUG OPPOSITE SIDE. 8 7/8"
14 1/2" 11"
FRONT OF
MACHINE
2 HOLES FOR
CL MACHINE BOLTING TABLE
TO TANK
1 1/4" 1 1/4"
8" AVG
3/8"
TRACK HEIGHT
3/8" 3" ABOVE TANK LIP 7/8"
3"
1/4" - 5/16" USE SILICONE SEALER BETWEEN
22" TABLE AND LIP OF TANK TO
INSIDE TANK PREVENT LEAKAGE
CLPS66eN-BAS
ELECTRIC L-R 701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
CL
MODEL:
38 5/8" CLPS66eN BASE
36 1/16" L-R OPERATION
11 7/16" 19 7/16" D-974807
REV B
6 7/8" 18 7/16"
6 3/16" 18 1/8"
3 9/16" 4"
BOOSTER
3 7/16"
4 1/4" P2 EXHAUST
DWT 3/8" 4" X 16"
5/8" P3 11 1/2"
5 1/2" CHEMICAL PORTS
10 1/2"
CL
2"
2 1/4"
1/2"
P1 E1 E4 E5 E2 P1 P7
E3 P5 FLOOR SINK
23" P12 (BY OTHERS)
OPEN DOOR P4 P6
CLEARANCE 12"
MIN
20"
SERVICE
CLEARANCE PLUMBING NOTES:
(BOTH SIDES) ELECTRIC, STEAM, AND GAS HEATS
WATER HAMMER ARRESTOR (MEETING ASSE-1010 STANDARD
OR EQUIVALENT) TO BE SUPPLIED (BY OTHERS) IN
COMMON WATER SUPPLY LINE AT SERVICE CONNECTION.
MISCELLANEOUS NOTES: RECOMMENDED WATER HARDNESS TO BE 3 GRAINS OR LESS
FOR BEST RESULTS.
OPTIONAL VENT HOODS OR EXTENDED HOODS EXHAUST
REQUIREMENTS: 200 CFM ENTRANCE END FOR NON-BOOSTER MACHINE (P6 CONN): RECOMMENDED BUILDING
400 CFM EXIT END. FLOWING WATER PRESSURE TO THE DISHWASHER IS 20 PSI,
(15 PSI MIN - 25 PSI MAX). IF PRESSURES HIGHER THAN 25 PSI
ALL DIMENSIONS TAKEN FROM FLOOR LINE MAY BE ARE PRESENT, A PRESSURE REGULATING VALVE WITH INTERNAL
INCREASED APPROXIMATELY 3/4" OR DECREASED 1/2". THERMAL EXPANSION BY-PASS MUST BE SUPPLIED (BY OTHERS)
66" INSIDE TANK (AT TABLE CONNECTION) IN THE WATER LINE TO THE DISHWASHER.
65-25/32" TABLE TO TABLE. FOR CONVENIENCE WHEN CLEANING, WATER TAP SHOULD BE
NET WEIGHT OF MACHINE: 770 LBS (STD HEIGHT), INSTALLED NEAR MACHINE WITH HEAVY DUTY HOSE AND
DOMESTIC SHIPPING WEIGHT: 876 LBS (STD HEIGHT). SQUEEZE VALVE.
CLeN LATENT AND SENSIBLE HEAT DISSIPATION WHEN USED, CHEMICAL SANITIZING FEEDER MUST BE CERTIFIED
INFORMATION ON F40459. TO NSF STANDARD 29.
CLPS66eN-BAS
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
ELECTRIC R-L
CL MODEL:
CLPS66eN BASE
19 7/16" R-L OPERATION
D-974806
18 7/16" 39 1/8" REV B
18 1/8" 36 1/16"
11 7/16" 14 9/16"
6 3/16" 4"
3 9/16" BOOSTER 3 7/16"
EXHAUST
1/8" 4" X 16"
11 1/2" 4 1/4" DWT
CHEMICAL
PORTS 5/8"
5 1/2"
CL
10 1/2"
2" P3
2 1/4"
1/2" P2
P7 E1 E4 E5 E2 P1 P4 P1
FLOOR SINK
23" P5 (BY OTHERS)
OPEN DOOR P6 E3
P12
CLEARANCE 12"
MIN
20"
SERVICE
CLEARANCE
(BOTH SIDES)
PLUMBING CONNECTIONS
CONNECTION INFORMATION
(AFF = ABOVE FINISHED FLOOR)
ELECTRICAL CONNECTIONS
LEGEND
CONNECTION INFORMATION
(AFF = ABOVE FINISHED FLOOR) ELECTRIC, STEAM, AND GAS HEATS
P1 DRAIN: 2" FPT, 7-3/8" AFF TWO POSSIBLE CONNECTIONS;
LEGEND MAY BE DRAINED TO EITHER SIDE OF VALVE, PLUG OPPOSITE SIDE.
ELECTRIC, STEAM, AND GAS HEATS P2 SANITIZER FEEDER: REMOVE 1/8" NPT PIPE PLUG TO ACCESS TAPPED HOLE.
1/8" NPT 59-1/2" AFF (LOW TEMP ONLY)
E1 ELECTRIC CONNECTION: SINGLE POINT, ELEC, GAS,
& STEAM, 1-1/4" CONDUIT HOLE OR 2" CONDUIT, P3 RINSE FEEDER: REMOVE 1/8" NPT PIPE PLUG TO
63-3/4" AFF ACCESS TAPPED HOLE. 1/8" NPT 59-9/16" AFF.
E2 ELECTRIC CONNECTION: BOOSTER. 15KW/30KW, P4 DETERGENT PROBE SENSOR: REMOVE CAP AND STUD ASSEMBLY TO ACCESS
1-1/4" CONDUIT HOLE OR 2" CONDUIT HOLE, 7/8" DIA HOLE (WASH TANK ONLY). 14-5/8" AFF.
63-3/4" AFF P5 INDIRECT DRAIN-FLOOR SINK: BY OTHERS, 0" AFF. WHEN REQUIRED,
E3 ELECTRIC CONNECTION: DETERGENT, SANITIZER INSTALL FLOOR SINK OUTSIDE THE PERIMETER OF THE DISHWASHER.
(LOW TEMP ONLY) AND RINSE FEEDERS. P6 COMMON WATER CONNECTION: 1/2" FPT,
1/2" CONDUIT. 64-1/4" AFF 11-3/16" AFF.
HIGH TEMP. W/O BOOSTER 180°F MIN.
194°F MAX.
ELECTRIC HEAT ONLY LOW TEMP. 120°F MIN.
SINGLE PHASE OR FIELD CONFIGURED P7 COMMON WATER CONNECTION: 1/2" FPT,
11-3/16" AFF
3 PHASE SEPARATE ELECTRIC CONNECTION HIGH TEMP. W/15K BOOSTER 140°F MIN.
E4 ELECTRIC CONNECTION: MOTORS AND CONTROLS HIGH TEMP. W/30K BOOSTER 110°F MIN.
1-1/4" CONDUIT. 63-3/4" AFF.
E5 ELECTRIC HEAT: 15,000 WATTS,
WASH TANK. 1" CONDUIT HOLE, 63-3/4" AFF.
OPTIONAL DRAIN WATER TEMPERING
P12 COLD WATER CONNECTION: 1/2" FPT, COLD TEMP 80°F MAX 7-3/8" AFF.
CLPS66eN-BAS
DISHWASHER 701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
SPECIFICATIONS: Meets requirements of ASSE Standard No. cally trigger rinse. Final rinse water line is equipped with a vacuum
1004. breaker downstream of an electrically operated solenoid valve in
DESIGN: Semi automatic, high or low temperature single-tank, common piping system. Rinse agent and Low Temp Final Rinse –
rack-type dishwasher with flexible thermal layer curtains at the Sanitizer agent (5.25% sodium hypochlorite – bleach) dispenser
ends of chamber and between wash and final rinse zones. Insu- injection ports provided in final rinse piping above chamber.
lated hinged inspection doors located in front of machine provide Caution: Certain materials, including silver, aluminum, and pewter
easy access to wash arms, rinse arms, strainer, strainer basket, are attacked by sodium hypochlorite (bleach) in the chemical
and pump intake screen. Length of machine inside tank (at table sanitizing dishwasher mode of operation.
connection) 66". Machine designed to clean and s anitize with hot FILL: Fill water line is equipped with vacuum breaker on down-
water 160°F wash and 180°F (minimum) final rinse, or low tem- stream side of electrically operated solenoid valve in common
perature 130°F wash and 120°F final rinse and a chemical sanitizer. piping system, for automatic maintenance of tank level.
Water hardness recommended to be 3 gr. or less for best results. DRAIN AND OVERFLOW: Large bell-type automatic overflow
Automatic interlocks shut off pump and conveyor if door is opened and drain valve inside power scrapper tank controlled from inside
when machine is in operation. of machine. Power scrapper overflows to drain. Wash tank drain
CONSTRUCTION: Tanks, chambers, frame, legs, control box, controlled from inside of the machine overflows to power scrapper
doors, and all panels are constructed of stainless steel. through large internally mounted stainless steel tubing. Drain seals
PUMPS: The two recirculating stainless steel pumps and impel- are large diameter high temperature o-rings. Drain automatically
lers with ceramic seat seals. Easily accessible pump assembly seats by closing inspection doors. Common drain utilizes a remov-
permits quick inspection. The pumps are self-draining. All piping able large diameter stainless steel tube sealed by rubber o-rings
distributing water to the upper and lower wash arms is stainless at each drain housing. Drain housing can be plumbed from load or
steel tubing. unload end of machine.
PUMP MOTORS: Built for Hobart 2 hp grease-packed ball STANDARD EQUIPMENT: Digital display of power scrapper, wash
bearings, splash proof, ventilated with manual, resettable inherent and final rinse temperature. Positive low water protection for tank
overload protection. Available in electrical specifications of 208- heat. Thermal Layered Curtains throughout machine are keyed to
240/60/1, 208-240/60/3, 480/60/3 and 600/60/3. Also available, but ensure proper placement. Drains are automatically closed when
not submitted for UL listing are 200-240/50/3 and 380-415/50/3. inspection doors are closed. Stainless steel adjustable feet. Bolted
stainless steel enclosure panels around perimeter and underneath
CONTROLS: A stainless steel control module with power and machine. Automatic tank fill. Door interlocks. Auto-timer. Vent fan
“start/stop” buttons is mounted on top of the machine. Machine and booster heater controls. Single point electrical connection.
control circuitry will be operated from a 120-volt control circuit Low temperature alerts. Service diagnostics. Dirty water indicator.
transformer. Electrical components are completely wired with Configuration “intelligent” delime notification. NSF rated configu-
105°C, 600V thermoplastic insulated wire with stranded conductors rable Pot and Pan dwell mode. Energy Saver Mode. NAFEM Data
routed through UL listed electrical conduit or covered wire way. Protocol compliant.
CONVEYOR: Rapid Return drive, designed for more even through- WASH TANK HEATING SELECTIONS (must choose one):
put of racks and allows for a 16-inch separation between the wash
ELECTRIC: One electric Incoloy® sheathed immersion heater
and the rinse zone. Racks conveyed automatically through wash
(15 KW) removable from inside tank. Tank water temperature is
and rinse zones and onto clean dish table. Ball Detent Clutch drive
controlled by microprocessor controlled thermostat with positive
prevents damage to machine or racks, should movement of racks
low-water protection and magnetic contactor. (Disconnect switches
be obstructed. Rack tracks, c onveyor structure, and drive units
not furnished.) A high limit device mounted on the surface of the
of stainless steel for 193⁄4" x 193⁄4" racks as standard. Conveyor
tank additionally protects heating element.
speed: 5.6 FPM.
STEAM: One-inch stainless steel steam coil. Tank water tem-
DRIVE MOTOR: Built for Hobart, 1⁄6 horsepower gear motor,
perature controlled by microprocessor controlled thermostat with
ventilated with manual, resettable inherent overload protection.
positive low-water protection. Steam supplied to machine through
Available in electrical specifications of 208-240/60/1, 208-240/60/3,
high temperature steam solenoid valve and line strainer.
480/60/3 and 600/60/3. Also available, but not s ubmitted for UL
Listing are 200-240/50/3 and 380-415/50/3. GAS: Regulated infrared immersion tube gas burner system.
Microprocessor controlled thermostat and a blower with a pressure
POWER SCRAPPER: CLPS66eN power scrapper is equipped with
switch control tank water temperature. Positive low water protec-
an upper and lower wash arm with specially shaped nozzles having
tion is provided. A high limit device mounted on the surface of the
large openings and arranged to effectively scrap all types of table-
tube additionally protects immersion tube. A solid-state igniter
ware. Power scrapper arms and end caps are easily removable for
board controls the gas valve and provides flame ignition. A trans-
cleaning without use of tools. Removable perforated stainless steel
former steps the control circuit voltage down from 120 volts to
strainer pans support a deep perforated stainless steel basket.
24 volts to power the igniter board and gas valve. For natural gas,
Basket and strainer pans (3) can be removed without lower wash
gas pressure to burner (customer connection) not to exceed
arm removal.
7" W.C. For LP gas, gas pressure to burner (customer connec-
POWER WASH: Wash tank is equipped with upper and lower tion) not to exceed 11" W.C. If gas pressure is higher than 7" W.C.
stainless steel CFD Wash Arms which effectively direct water jets natural or 11" W.C. LP pressure regulating valve must be supplied
to all ware surfaces. Both upper and lower wash arms are self- (by others) in the gas line to the dishwasher.
aligning and have easily r emovable end caps for cleaning without
OPTIONAL EQUIPMENT AT EXTRA COST:
use of tools. A removable perforated s tainless steel strainer pan
Stainless steel pressureless booster heater. Stainless steel vent
supports a deep perforated stainless steel b asket.
hoods with vent stack and locking-type damper. Higher than
FINAL RINSE: Final rinse flow rate: 2.1 gpm, .62 gpr, 126-gph. standard chamber. Side loaders and unloaders. Floor mounted
Stainless steel upper and lower Auto Position Rinse Arms™ have steam booster. 193⁄4" x 193⁄4" peg, combination and miscellaneous
single rows of nozzles. Racks entering the rinse zone automati- racks. Table limit switch. Drain water tempering kit.
As continued product improvement is a policy of Hobart, specifications are subject to change without notice.
■ Positive forced circulation of high velocity Specifications, Details and Dimensions on Inside and Back.
heated air
■ Fits CLe models For use with
■ High velocity industrial type blower-dryer is CLe Series Dishwashers
quiet, giving truly high performance at a low
sound level
■ 2 H.P. blower
■ 10 KW electric heat
VOLTAGE
❑ 208/60/3 ❑ 380/60/3
❑ 240/60/3 ❑ 200/50/3
❑ 480/60/3 ❑ 380-415/50/3
❑ 600/60/3
DESIGN: To promote rapid drying of tableware and Conveyor is Hobart “Dual Drive” with s tainless steel
trays by forced circulation of high velocity heated air pawls, designed to connect to CLe warewasher.
through the blower dryer.
ELECTRIC HEAT: 3 - 3.3 KW Incoloy® electric
Heavy-duty direct drive industrial fan blows room heaters are used for a total of 10 KW heating
air through electric heater and large area ducting. capacity. T hermostatic control and separate over
Heated air directed vertically downward to drying temperature protection are standard. Electrical
area through rectangular orifice covering full width of specifications are 208/60/3, 240/60/3, 480/60/3,
chamber. Baffles below conveyor redirect air upward 600/60/3, 380/60/3, 200/50/3, 380-415/50/3.
within drying area and minimize heating of discharge
BLOWER: Industrial fan-type with direct drive wheel.
table or hot air contact with clean-dish operator at
Housing of welded construction.
end of machine.
2 H.P. Blower direct drive motor. Exhaust requirement
Any object which will pass through the machine will
is 200 to 400 CFM.
be handled at the dryer area without necessity of
readjusting blower plenum upward or downward. MOTOR: Splashproof enclosure, v entilated design.
Furnished only in three-phase electrical specifications
CONSTRUCTION: Chamber construction is stainless
of the basic CLe Model in 208-240/60 and 480/60.
steel, welded and bolted. Vent is 4" x 16" inside
The controller circuit operates on 115 volts s upplied
dimension and contains a locking type control
by the transformer on the dishwasher.
damper.
MOTOR CONTROL: Ambient temperature
Stainless steel wrap-around encloses entire external
compensated automatic resetting solid state over-
component assembly consisting of electric heater,
load protection, pre-wired. Operation controlled by
motor and blower. Blower dryer is approximately
dishwasher m otor switch, i.e. blower functions only
173⁄8" above height of machine.
during machine operation.
Tank portion is constructed of stainless steel with
legs and lower c ross-members of 15⁄8" stainless steel
tubing and stainless steel adjustable feet.
As continued product improvement is a policy of Hobart, specifications are subject to change without notice.
ELECTRICAL
VOLTS CYCLE PHASE CONN AFF NEMA AMPS KW HP MCA MOCP
1 600 60 3
✔
APPROVED REVISE REJECTED
NOTES:
MISSING ITEM NO. 78 VENT DUCTS. VERIFY ALL
DIMENSIONS.
✔
APPROVED REVISE REJECTED
NOTES:
REFER TO SUBMITTAL 114000-03 KITCHEN EQUIPMENT FOR
ADDITIONAL COMMENTS.
Item No._____________________
Quantity______________________
Job Name_____________________
Spec No._____________________
MADE
IN THE
USA Notes
WATER WASTE
HOT HOT HOT COLD COLD FILTERED FILTERED CONDENSER CONDENSER INDIRECT DIRECT
SIZE AFF GPH SIZE AFF SIZE AFF INLET SIZE OUTLET SIZE SIZE SIZE
1 3/8" 1
2 1/2" 2
3 3/8" 3/8" 3
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 B-7232-01
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
Job Name__________________________Date_________
Model Specified_____________________ Quantity______
Customer/Wholesaler______________________________
Contractor_______________________________________
Architect/Engineer_________________________________
18" 5 1/2"
[458mm] [139mm]
1/2"
[13mm]
16 9/16" 3/4"
[421mm] [19mm] 1/2"
[13mm]
EB-0107 2 3/8"
High Flow [60mm]
Spray Valve
Drawn: KJG Checked: JRM Approved: JHB Date: 02/16/15 Scale: 1:8 Sheet: 1 of 2
_CE Williams MS Page: 206
T&S Brass B‐7232‐01 Item #82
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 B-7232-01
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
ITEM SALES NO. DESCRIPTION
NO.
1 EB-0107 High Flow Spray Valve (Blue)
2 012504-40 Grip Handle (Blue)
3 014938-45 Roller Replacement Kit
4 014949-45 Hose Stop Repair Kit
5 014941-45 3/8" x 35' Hose Replacement Kit
6 014932-45 Small Coated Spring
7 014946-45 3/8" Swivel Repair Kit
8 014948-45 O-Ring Replacement Kit
9 014940-45 Ratchet Repair Kit
5
7
8
3
2
Drawn: KJG Checked: JRM Approved: JHB Date: 02/16/15 Scale: NTS Sheet: 2 of 2
_CE Williams MS Page: 207
T&S Brass 0RK2 Item #82
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 0RK2
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
Customer/Wholesaler______________________________
Contractor_______________________________________
2 1/2" Architect/Engineer_________________________________
64mm
Minimum 3 5/8"
92mm
Maximum
6"
152mm
2 3/4" [70mm]
Wall Flange w/ Set Screw
4-Arm Handle Adjustable Polished Chrome
w/ Blue Index Plated Wall Sleeve
1/2" NPT
Female Inlet
3 1/8"
79mm
1 3/8"
35mm 1/2" NPT
Female Outlet
Drawn: JBC Checked: JRM Approved: JHB Date: 02/23/16 Scale: 1:2 Sheet: 1 of 2
_CE Williams MS Page: 208
T&S Brass 0RK2 Item #82
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 0RK2
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
ITEM SALES NO. DESCRIPTION
NO.
1 000939-45 Escutcheon, Set Screw
2 005960-40 Eterna Cartridge, RTC
3 002521-45 4-Arm Handle
4 000922-45 Lever Handle Screw
5 001660-45 Blue Index-CW
6 001501-40 Escutcheon
7 151F Escutcheon Tube
Hex Bushing, 1/2" NPT Male x 3/8"
8 001359-40 NPT Female
2
8
3
7
6
4
Drawn: JBC Checked: JRM Approved: JHB Date: 02/23/16 Scale: NTS Sheet: 2 of 2
_CE Williams MS Page: 209
T&S Brass B‐CVH1‐2 Item #82
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 B-CVH1-2
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
Job Name__________________________Date_________
Model Specified_____________________ Quantity______
Customer/Wholesaler______________________________
Contractor_______________________________________
Architect/Engineer_________________________________
2 3/8" 1 1/8"
60mm 29mm
Notes:
1. Maximum Pressure 400 PSI, Maximum Temperature 200° F
2. Not to be Used for Natural Gas Applications.
Drawn: JBC Checked: JRM Approved: JHB Date: 01/18/16 Scale: 1:1 Sheet: 1 of 1
_CE Williams MS Page: 210
T&S Brass B‐0512 Item #82
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 B-0512
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
Job Name__________________________Date_________
Model Specified_____________________ Quantity______
Customer/Wholesaler______________________________
5 5/8" Contractor_______________________________________
143mm Architect/Engineer_________________________________
5"
126mm
1 11/16"
44mm
2 5/8"
66mm
1 15/16"
50mm
Escutcheon
2 1/4"
57mm
Rough-In Requirement:
(2) 1 9/16"[ 40mm] Faucet Mounting Holes
1/4" [6mm] Center Mounting Screw
Product Specifications: Product Compliance:
Concealed Mixing Faucet w/ 4-Arm Handles ASME A112.18.1 / CSA B125.1
NSF 61 - Section 9
NSF 372 (Low Lead Content)
ANSI A117.1 (ADA)
Drawn: KJG Checked: JRM Approved: JHB Date: 04/30/14 Scale: 1:2 Sheet: 1 of 2
_CE Williams MS Page: 211
T&S Brass B‐0512 Item #82
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 B-0512
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
ITEM SALES NO. DESCRIPTION
NO.
1 006020-40 Eterna Cartridge, RTC
2 015986-45 Spacer
3 000020-40 Escutcheon
4 002819-45 Screw
5 001661-45 Red Index-HW
6 000922-45 Lever Handle Screw
7 001660-45 Blue Index-CW
8 002521-45 4-Arm Handle
5 7
8
4
Drawn: KJG Checked: JRM Approved: JHB Date: 04/30/14 Scale: NTS Sheet: 2 of 2
_CE Williams MS Page: 212
T&S Brass B‐0109‐01 Item #82
Model No.
T&S BRASS AND BRONZE WORKS, INC.
2 Saddleback Cove / P.O. Box 1088 B-0109-01
Travelers Rest, SC 29690
Item No.
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
Job Name__________________________Date_________
Model Specified_____________________ Quantity______
Customer/Wholesaler______________________________
Contractor_______________________________________
Architect/Engineer_________________________________
1 1/2"
38mm
2 1/4"
57mm