=6)%
alllABOUT US
Ismat is a high-concept, technically sophisticated manufacturer of rubber moulded, extruded,
lining and polyurethane products. Based in Sharjah - UAE since 1994, we cater to large OEMs In
the construction, marine, oilfield and other manufacturing sectors for all their rubber requirements.
The founder, Mr.Yakub envisioned Ismat as a forward-thinking engineering company driven by
innovation and a passion for state-of- the-art products, that meet the accelerating demands of our
customers.
OUR PRODUCTS
1. Moulding 2.Extrusion 3.Lining 4.Polyurethane 5. Building Protection System
6. Aircraft Chock 7.Rubber Sheets & Electrical Mats 8. Industrial Plastics
MOULDING
MOUNTING
Applications:
Used in Engines, Generators as anti vibrators and in heavy Equipments,
plants and machineries mainly to isolate vibrations from work surfaces,
Reduce noise levels, absorb shock.
Type:
Conical mountings, Machine mountings, Bushes, Spherical mountings,
Buffer mountings pads, Bobbins, Spring, mounts, side bearer mounts,
suspension components.
SEALS
Applications:
Hydraulics and pneumatics.
Type:
‘0’ Rings, 'U! and 'V' Seals, Chevron packings, Quad seals, oil seals,
Dowty seals, Cup seals. Available with re-inforced metals and canvas.
Polymers:
Nitrile, Neoprene, Viton, Silicon, Polyurethanes and Teflon.GRABBER PADS
Applications:
Forklifts in Concrete and Cement block industries and on transport vehicles.
Type:
With or without holes or metal inserts.
Comments:
High abrasive and tensile strength. Good resistance against wear and tear applications.
GASKETS
Applications:
Rubber gaskets are typically used for water pipes; other fluids,
oils, and chemicals and other low-pressure applications.
Type:
Fabric Reinforced and plain types in different shapes.
Comments:
Arubber gasket is a mechanical seal that serves to prevent leak
between two objects while under pressure and temperature.
Polymers:
EPDM, Nitrile, Neoprene, Viton, Silicon.
RUBBER BALLS
Applications:
They are used as check or ball valves as screen cleaning and screen
de-blinding as air restriction, in flow control and flow meter applications
in the pharmaceutical food and chemical processing industries and in
Dewatering industries.
Type:
Fully Customized.
Polymers:
Natural, Nitrile, Neoprene, Polyurethane.Applications:
Rubber bellows are used
to sealing environments
carrying liquids, slurry and
gases, constructions and
elastomer coated fabrics
or rubbers to fit any specific
applications needs.
Polymers:
Natural, Neoprene, Nitrile, Silicon, Viton
eo Sa
Applications:
Valves are devices, available in various shapes and sizes, designed to meter, maintain or
restrict the flow of materials through hoses, pipes, tubing or entire systems. Valves generally work by
allowing flow while they are in their open position, and restrict flow when they are closed,
Type:
There are wide varieties of rubber valves like check valves, ball valves, air pressure valves, butterfly
valves, gate valves etc. Rubber is used to design valves so as to allow one way sealing devices like as
duckbill valves, umbrella valves, flapper valves etc. to withstand harsh chemical environments. The
right valve design as per flow parameters can be produced by using rubber.
Applications:
Used on the ladder legs as anti-slip and anti-skid purpose. To provide
stability while mounting the ladder and as a means of protecting the
flooring from being directly exposed to the aluminium metal.
Type:
Fully Customized.
Polymers:
Natural, SBR, Polyurethane.EXTRUTION
The rubber stripes and profile are considered to be the most popular product in rubber extrusion production
line. Profiles and stripes are available in a variety of shapes, sizes, rubber materials. We manufacture both
solid and sponge types.
Profiles are used as sealing components with anti friction qualities for the smooth operation of windows
and doors. These rubber profiles are extensively used in a vast range of diverse applications. These
rubber profiles mainly serve as sealing components between the glass and aluminium sections .
Some examples of the profiles that we manufacture are shown in the pictures below. Being custom
manufacturers, we design and develop rubber profiles to the specific requirements of our customers.
Mainly used as water tight gaskets for the hatch covers in the shipping industry.
These packing's are manufactured in sponge rubber as well in solid rubber ina
variety of hardness, ranging from 40 + shore A to 85 + shore A.
Rubber packing's are manufactured in oil and weather resistant polymers
such as Neoprene, Nitrile, and EPDM and in special cases
yn and Viton.
Polymers:
Natural, Nitrile,Neoprene,Silcon and Viton.
Round rubber cord are a good
alternative in areas where
the sealing is not too aggressive
or under very high pressure. These ¢)
cords can be installed veryeasily in inaccessible work areas and
can be joint on site with adequate adhesive. They provide sufficient resistance and elasticity in the
sealing applications.
Polymers:
NBR, EPDM, Silicon and Viton.
FENDER
Auber 00-Type Fender (ener Seles neater
Legs L__» |
Rubber fenders are more popular in the marine industry. Marine
rubber fenders are placed along the sides of a boat or ship to
provide a cushioning effect to prevent damage and protect the boat
from impact.
Boat fenders are made from soft rubber and used between boats
and other objects like piers, pilings, and docks to protect the boat.
from damage. Fenders for boats are available in a wide range of shapes and sizes that can be used
for small yachts to the largest vessels. They are designed to absorb the berthing energy due to their
deflection. Marine fenders are manufactured from natural rubber as well as synthetic rubbers such
as EPDM, SBR and Neoprene. Rubber fenders can withstand all possible operating conditions in
the automobile and marine industry.
Rubber fenders have applications in all kinds of shipbuilding, harbor construction, and maritime
transportation. We manufacture floating buoy, cylindrical, DD-type, DO type, square, key hole type
and corner rubber fenders.
All of these fenders can further be designed with different specifications and can also be custom
designed.
LINING
RUBBER LINING
Rubber lining is a rubber sheet or membranes used for protection from corrosion in aggressive
chemical environments.There are several rubber lining applications some of which include
resistance to acid, chemicals and alkalis, abrasion resistance, infect
protection.
Polymers:
Natural , Synthetic, Chloprene and EPDM
POLYURETHANE
POLYURETHANE- A STRONG RESILIENT VERSATILE POLYMER
Polyurethane components possess many inherent strengths. The outstanding engineering properties
of this compound makes it ideal for demanding mechanical, chemical, thermal and electrical applications.
The high coefficient of friction of polyurethane makes it eminently suitable for frictional drives. It's
sturdy electrical and thermal properties, resistance to chemical media and broad temperature
tolerance- all enhance its range of applications.
Polyurethane has additional advantages to recommend it: high load bearing; excellent abrasion
resistance; deep impact and tensile strength; tough against wear and tear; versatility in engineering
applications. It can be formulated to exhibit low or high resilience with a wide variety of hardness.
Polyurethane combines the advantages of rigid plastics, metals, and ceramics with the flexibility
of rubber. In many instances, polyurethane has actually replaced metal, rubber, wood and plastic,
given their exceptional performance and cost benefits.
We cast all of our standard and custom formulas as well in and entire range of durometeres,
10 shore A to 80 Shore D.BUILDING PROTECTION SYSTEM
Comer guards are designed to give drivers the maximum
visibility using Black and Yellow strips, the correct hazard
warning colours. The solid rubber guards’ wrap-around design
protects your property corners, columns and entrances that are
exposed to vehicle and warehouse traffic. The corner guards can
be securely fitted to concrete brick, plain or plastered.
TWPEA
TPEB TYPEC TYPED
Arange of solid rubber wall guards designed to be easily and securely fixed to walls. The guards can
wrap around steel or concrete bollards, absorbing impact to reduce damage to property. The guard
is supplied in a large range of thicknesses and widths. The screw head is concealed in the recessed
grooves, stopping any accidental damage to property or vehicles. This range of guards can be fixed
horizontally or vertically along walls, round columns and ramp areas. The wall guards can be fitted
to many surfaces i.e. bricks, plaster, steel or concrete. Designed to absorb impact damage in loading
bays, service areas and car parks. The solid rubber wall guards are fixed at an equi distance of 500mm
to reduce the risk of accidental damage to all vehicle types. We supply the 'E' guards cut to the exact
length to suit your site requirements.
a“. SSS aeThey are designed not to cause any damage to vehicles. Rubber wheel stopper gives
the driver a clear warming that their rear wheels are parked correctly. They are supplied
with pre-drilled holes for concrete or asphalt installations.
The wheel stoppers reduce the risk of accidental damage to columns, concrete pillars
and lighting columns, etc. They are manufactured in Solid and Hollow types for a tough
service life. The product absorbs impact and quickly recovers back to its original
shape when the load is removed.
They are cut to the exact size to suit your site requirements. The product can be
delivered in an All Black with a Bright Yellow Strip rubber finish.
Ismat speed humps offer the best solutions
for slowing down traffic safely. Installin gour
ramps will reduce the risk of accidents on
your site. As manufacturers, ourproduct range
gives you best quality rubber, with the
longest working life.
AIRCRAFT CHOCK
Rubber Chocks are made up of fully rubber Construction for maximum gripand
life. Itis widely used by civil airline and air forces worldwide. The wheel when set
against the rubber chocks experience the flexibility. This unique capability of
rubber chockis possible due the equilateral triangle shape and unique internal
design of the product. The product also comes with rounded corners to avoid
wheel trapping and are deeply ribbed for maximum grip on concrete and
tarmac surfaces.
Aircraft chocks made exclusively for large, heavy aircraft.
Typical users include : Field based operators, Ground Support Equipment and
military. They come ready to use with heavy duty, high quality rope attached for
easy handling for Air BusBoeing etc, .
The Rubber chocks are of two types:
1, Moulded
2. Extruded
The moulded one is made of several segments in black &yellow colours and secured with three numbers of Gi
threaded bar fastened by nuts and with a centre metal pipe flared at both ends for excellent rigidity. The Extru-
ded Chocks a single piece either in black or yellow colour and provided with centre nylon rope for handling.
The chocks are designed to be very stable and with stand heavy loads to prevent the aircraft from the roll over.
The synthetic rubber used to make the chocks enable it to with stand wide range of climatic conditions. The
designs of the chocks make them very stable whenever in use and take when not in use. These chocks can be
used for Business, commercial cargo and military air crafts.RUBBER SHEETS & ELECTRICAL MATS
BAS
We offer superior quality rubber sheets in variable thicknesses and
dimensions. These rubber sheets are used as floor coverings around
the electrical panels and between the flanges & joints subjected to air
pressure & water. These sheets are manufactured using the blend of
high quality natural and synthetic rubber. Tested on various parame-
ters of friction and durability, the range is also customized as per the
requirements of client. We provide electrical mats for 9KV to 15KV.
Electrical Mats are used as floor covering around electrical panels as a
safeguard to the life and limb of the workmen due to possible leakage of
current and short-circuit. Electrical Mats are used in power generation
plants, sub-stations, workshops etc.INDUSTRIAL PLASTICS
Industrial plastic division manufactures parts from various Industrial plastics like PTFE, Nylon, Teflon, PP,
PEEK, Delrin, HDPE, UHMW etc. to any other customized plastic requirement as required by the custo-
mer, and also stocks are available in the form of rods and sheets.
* Virgin PTFE and filled grades of PTFE like Glass, Carbon, MOS2, Graphite and Bronze if you have any
specialized requirements we can also produce material from other exotic grades of PTFE like ceramic,
peek etc.
* PEEK known as poly-ether-ether- ketone is a high performance thermoplastic made by Victrex plastics
and offers excellent chemical, wear and electrical resistance along with high temperature performance.
PEEK also offers an excellent resistance to Radiation
* PCTFE previously known as KEF-F is now available under the brand name Neoflon and is made by
Daikin Japan, PCTFE is a fluorocarbon based polymer and offers a unique combination of physical and
mechanical properties and an excellent temperature range from +204 deg C to -204 deg C. PCTFE also
has extremely low outgassing, making it well suited for use in aerospace and flight applications.COIN MAT WHEEL STOPPER = AIRCRAFT CHOCK
CARDOOR SEALS SILICONE RUBBER PU PRODUCTS — RUBBER MOUNTING
Rad Fale
BAG |! gee 9
Certificate