My name is Muhtadin. I graduated from Industrial Engineering at University of Trunojoyo
Madura, Indonesia. During undergraduate I have had a lot of organization experiences as an assistant coordinator in Manufacturing System Laboratory and have joined in some researches conducted by my professor. Furthermore I had a lot of work experiences as Production Planning and Inventory Control Staff in the paper manufacture and as Foreman in Consumer good company. In my college I have conducted research about Hot Press Recycle Plastic HDPE which are made with automation control. The machine was made for altering plastic waste to be a valuable product such as chair, table, and houseware made from plastic. Lately, 3D printing have been growing fast. A large number of companies are moving away from conventional manufacturing to digital. 3D printing offers many advantages in making products with high accuracy, low cost, short time and customizable form. A number of benefits of 3D printing make it easily accepted by many industries including aerospace, automotive, medical, robotics and others. The rapid development of 3D printing makes the demand for filament plastic increase. The abundance of plastic waste in my country makes me want to conduct research on how to produce high quality filaments and low prices using plastic waste. In Indonesia, some researchers have developed the concept of extruder machine to produce filament 3D printing, but few companies produce filaments due to the high cost and complicated process. Based on my previous research and the problems, I want to develop my research in the use of plastic waste by making an Automation Extruder Machine that can produce plastic filaments as the basic material of a 3D printing. In the research plan I will develop extruder machine that can be used not only large enterprise but also micro and small enterprise. Besides reducing plastic waste, this machine will improve the economy of the community in the digital era. Taiwan is one of the largest exporters of electronic components, mobile phones and spare parts in the world. This is evidenced by the many products made in Taiwan in Indonesia. It shows that Taiwan is very advanced in the field of technology. In addition, I choose college of engineering especially Mechanical Engineering at Chung Yuan Christian University because I have engineering background. After I have searched, Chung Yuan Christian University is one of the leading universities in the field of technology in Taiwan. Chung Yuan Christian University provides adequate resources and facilities to produce quality students. Because of the information I am eager to study at Chung Yuan Christian University. During completing my study at Chung Yuan Christian University. I have some plans to join in several activities such as I want to deepen my fundamental knowledge on my field by joining research team and gaining experiences in laboratory skills, join in Research Fellowship Program in the good manufacturing companies in Taiwan, participate in seminars and conferences either outside or inside campus to gat chance and make relation with other researchers. After graduating later, I will become a lecturer at my first campus. I will carry out to continue the research to advance industry in Indonesia and build a young generation with global insight. To realize that goal, I need a higher education and more useful to improve the competence and increase my mindset. Now, I want to take the opportunity to study at Chung Yuan Christian University to support what I aspired above. For the last, I hoped that Chung Yuan Christian University would give me the opportunity to be a student there. I will really study there.