Professional Documents
Culture Documents
Glaend System Cable Support Catalogue
Glaend System Cable Support Catalogue
Being first is good, being smart is better, being both is Simply the Best!
THE PERFECT PARTNER FOR YOUR PROJECTS!
A complete FRP system: We listen to our customers. With this in mind plus the demand for new
creative and unique products that last longer, reduce installation time and costly maintenance, we have
developed a range of FRP / GRP cable ladders, trays and supports that you can install our Trefoil Cleat,
ETIN tubing clamps as well as other time saving accessories.
Our unique FRP design: We have designed our FRP system based on the same concept that made us the
unprecedented market leader, supplying to the Oil and Gas Industry in the North Sea shelf over 3 decades.
This environment represents one of the harshest test conditions possible. Our cable management systems have
passed the test of time and documented installations serve as our reference, can be found at major Oil and
Petrochemical companies around the world. This is why our FRP system is Simply the Best!
Our main factory and headquarters in Norway (left) and our factory in Malaysia (right).
Below is our fabrication facility in Malaysia where the FRP systems are engineered and fabricated in large scale.
Total supplier: As a total supplier of cable management and multidiscipline support systems and of all types of
materials, with worldwide references, our recommendations are trustworthy and focused.
You can be confident that when you are next in the market for a non-metallic support system, Oglaend System
FRP ladder, tray and support will be your best choice for value, ease of installation and technical quality.
2
Discipline guide:
MultiGrid™ FRP Support System
Contents: Page
Project References 11
Cable Ladder type FOE
Elbows, Covers, Dividers, Splice Connectors,
Risers, Drilling Jig and Accessories. 12
Cable Tray type FTE with Elbows,
Risers, Covers, Dividers, Splice Connectors,
Drilling Jig and Accessories 24
Page 20 Cable Ladder Cover Page 20 HD Cover Fixing Clamp
Loading Data 30
Page 20 Support System in FRP
DESIGN TOOLS MultiGrid™
Oglaend FRP products are available in Central & Cantilever Supports, Splice
the following design tools AVEVA PDMS Connectors, Drilling Jig and much more 31
and INTERGRAPH PDS. Designers and
engineers please contact Oglaend System MultiGrid™ Installation Guide 32
at www.oglaend-system.com
FRP Support Channels 35
HD Flexi Special Screws for FRP Products 42
Fixing Clamp
Accessories Screws, Nuts and Bolts 43
HIGHLIGHTS Page
Chemical Exposure Chart 44
Installation, Storage & Handling Guide 45
Russian Fire and Extreme Climate Condition Cert. 8
Updated Project List 11 Oglaend System main Catalogues 46
FRP Step Down Splice Connector 22 Worldwide Locations 47
New Loading Data for IEC and Nema 29
!
Page 10 NEW
for more
FRP
information
from
Oglaend Industries Malaysia
www.oglaend-system.com
Oglaend System has developed new extreme low smoke & toxicity Phenolic resin
systems which was designed to meet the high standards set by the United States
Coast Guard (USCG) and Marine Equipment Directive (MarED) where products
can be used in all areas and applications offshore.
Oglaend has been accredited the following standard/approval
United States Coast Guard (USCG) under new Fire Test Procedure (FTP) codes:
· IMO Resolution MSC.307 (88) Annex 1, Part 5
· IMO Resolution MSC.307 (88) Annex 1, Part 2
Marine Equipment Directive (MarED) which states that the products are
universally acceptable across Europe under the “Wheelmark” marking.
Oglaend System offers ABS rated product under 2009 Steel Vessels Rules
1-1-4/7.7, 4-8-4/21.9.4(d) & (e), 4-8-4 Appendix 1.
3
OUR FRP PRODUCT LINE
A new generation in the market
When we designed this new cable management and multidiscipline support system we had one thing in mind:
To be Simply the Best, in FRP products. With over 30 years experience as the world leader in the supply of cable
support systems, we had evaluated market trends, customer requirements, designs and cost factors.
With all these factors in mind, we have created a full range of products that are user-friendly and cost-efficient
with a unique high strength solution in today’s market. Combined with creative user-friendly fittings and smart
accessories you can see why Oglaend System is Simply the Best!
Process control
Resin bath Heated
die
Continuous mats
and surface veil
Pre-molding and
finish-molding
Pulling
Cutting
Pultrusion is a continuous process of roving or mat/roving bundles, which are drawn through a resin
impregnated bath to coat each fiber with a specially formulated resin mixture. The impregnated fibers are then
drawn through a heated die which forms the desired cross section. Curing of the thermosetting resin is initiated
by heat in the die and catalyst in the resin. The rate of reaction is controlled by heating the die.
The resulting high uni-directional strength profile is cut to length and ready to be used in the Oglaend System
FRP Cable Management and Multidiscipline Support system.
4
FROM CONCEPT TO INSTALLATION
With smart solutions from Oglaend System, you can reduce cost and aid installation. Together with our satisfied
customers, our engineering/design team has developed a well-known technology into Simply the Best!
The British Gas Tapti-project site where FOE-150 standard cable ladders were installed, including some special designed solutions to
complete the client´s tasks.
5
The ADVANTAGES of Reduce installation costs
Oglaend System and time by:
FRP Products Longer spans between the supports.
Snap on Lids.
Flexible fitting.
Quick locking anti-vibration nuts.
Apply Oglaend System´s Smart technology.
Our anti-vibration locking system and our patented SmartLok P composite insert which is heat resistant, fire
retardant and halogen free, means no mess, no fuss, no glue; just a quick, clean and simple installation. We are
confident that if you use this system, you will see the
advantages for yourself.
Flexi around
FOE-150 every obstacle
6
Our patented
SmartLok rung insert P
30
20
TENSILE LOAD
FOE-150 NR Ladder 10
27,2
27.2
22,7
22.7
kN
18,1
18.1
13.6
All metal Lock Nut
13,6
9.0
9,0
4.5
4,5
00 Standard Nut
10
10 20 30 40 50 60 70
20 30 40 50 60 70 80
80 90
90 100
100 110
110
Time (seconds)
Time (seconds)
HIGH STRENGTH
Higher strength than structural steel on a weight
to weight ratio. ASTM D-638 / ASTM D-695.
IMPACT RESISTANT
Returns to original position without any permanent
deflection or distortion. ASTM D-256 / IEC 60068-2-75.
FIRE RETARDANCY
LIGHT WEIGHT All products used in the construction of ladders and trays
FRP pultrusion is lightweight, average 15% to 20% that are manufactured in accordance with ASTM-E84 class 1
of steel products. & BS476 part 7 class l and ll.
CORROSION RESISTANT Self extinguishing to UL94 V-0 under test procedure
Pultruded products are not susceptible to rusting, pealing ASTM-D 635.
nor flaking and are impervious to a broad range of ULTRAVIOLET STABILITY
corrosive elements. All pultruded products contained an ultraviolet inhibitor,
NON-CONDUCTIVE this is further complimented with an external surface veil.
Glass reinforced pultrusions have low thermal conductivity ASTM D570 / BS 2782 M552A / ASTM G154.
and are non-conductive. ASTM D-149 / ASTM D-495. WEIGHT AND SHIPPING
ELECTRO-MAGNETIC TRANSPARENCY Our versatile system is light weight and can be packed
Pultruded products are transparent to radio waves, flat to reduce expensive shipping costs.
microwaves and other electromagnetic frequencies. HALOGEN FREE
DIMENSIONAL STABILITY Our products are Rated Zero Halogen according to
The coefficient of thermal expansion of pultruded IEC60754.
products are marginally less than steel and aluminum. SURFACE & VOLUME CONDUCTIVITY
LOW TEMPERATURE Oglaend System has a full range of ladder and tray
FRP has excellent mechanical properties at low products that are conductive and tested in accordance
temperatures. to ASTM D-257.
8
5. MATERIAL CONTENT a ttached to the FRP ladder and tray using the
a. Glassfibre to resin ratio shall be maintained between Oglaend System self-locking bolt and safety nut.
45%-65% by weight in all pultruded components.
c. Fasteners for ladders are 10mm diameter for splice
b. Flat sheet shall be 40%-50%
plates and 8mm for the rung fixing detail.
6. LADDER SIZES d. Fasteners for trays are 6mm diameter.
a. Ladder Heights: 70, 100, 150mm.
b. Ladder Widths: 150 to 900mm. 11. PHYSICAL PROPERTIES
c. Ladder Lengths: 3m & 6m. Straight Ladder section shall be pultruded glass reinforced
d. Rung Spacing is 300mm (other sizes available). with a premium resin system:
e. Radius of Fittings: 300mm is standard. a. Our ladder and tray members
600 & 900 on request. Fittings shall be mitered type. are designed specifi cally to
d. No molded or pressed fitting are acceptable as they optimize the load capacity in a
would not comply with loading specification. the form of a beam section.
e. All ladder rungs are perforated as standard. This UNIQUE style has two b
important advantages, the
7. CABLE TRAY SIZES first being the way our splice
a. Widths: 50, 100, 150, 200, 300, 400 & 600mm. plate fits flush and tightly
For sizes greater than 400mm contact Oglaend System. between the flanges (see «b» is described
b. Depths: 50 and 80mm respectively. detail “a”) thus preventing the in detail on
c. Tray covers are self-locking and clip-on type. page 7.
plate from slipping at time of
d. All trays will be perforated at 300mm centers. installation. The other is our patented rung to ladder
e. Radius of Fittings: 250mm is standard. attachment where the rung fits neatly between two flanges
and locked using our patented insert (see detail «b»).
8. LOADING REQUIREMENTS
b. Rung to side rail member connections shall be connected
a. There are three working load classifications
by a fire retardant (UL94 VO halogen free) composite
for FRP cable ladder based on (20’) support
locking clip. The rung to side rail mechanical connection
spans with a minimum safety factor of 1.5.
shall resist both vertical shear and rung pullout.
Class Working Load (Nema) c. The height of the rung is 24mm to maximize cable
installations.
A 50 Lbs./Lineal Ft or (74 kgs/m)
B 75 Lbs./Lineal Ft or (111 kgs/m) d. All Rungs have perforations along the length to aid easy
C 100 Lbs./Lineal Ft or (148 kgs/m) installation of cables.
e. All sections are able to use Oglaend System ETIN tubing
b. Span support criteria shall be specified
clamp and TREFOIL SmartCleats and other fixing
(refer to the following table).
accessories.
Support f. Straight sections of ladder and tray are pre-drilled to
Span (Ft.) Working Load in Lbs./Lineal Ft. accept connector plates.
Class A Class B Class C g. All cut ends and drilled splice plate holes are sealed
20 50 (74kgs/m) 75 (111kgs/m) 100 (148kgs/m) prior to goods leaving factory.
18 61 92 123
16 78 117 156 12. ANTI STATIC – ASTM D257
14 100 150 200 All products can be supplied with Anti Static Properties
12 139 208 - ranging from Surface resistivity 106 to 1010. For Volume
10 200 - - Resistivity 105 contact Oglaend System for further details.
* Independent test reports are required to substantiate 13. RESISTANCE TO ENVIRONMENTAL FACTORS
NEMA FG 1 load criteria. Composites display excellent resistance to the corrosive
effects of freeze-thaw because composites are not attacked by
9. IEC LOADING galvanic corrosion and have low water absorption, they resist
Oglaend System offers a range of ladder and tray products the destructive expansion of freezing water.
that are IEC 61537 certified by DNV which offers a Safe
Working Load x 1.7. Contact us for more information. 14. EARTHING
Earthing or Bonding jumpers are NOT required on standard
10. CONNECTOR PLATES AND FASTENERS non conductive ladders or trays. They are only required when
a. Splice plates are in Stainless Steel AISI 316L or in FRP using conductive ladders or trays or upon customer’s request.
designed with sufficient strength to suit all applications.
Suggested install distance for bonding jumpers is 18m (60ft).
b. ANTI VIBRATION SOLUTION. All splice plates are
9
15. RESIN SYSTEMS maximizing performance to meet application. · IMO Resolution MSC.307 (88) Annex 1, Part 5
When choosing a resin system for your application, it is always · IMO Resolution MSC.307 (88) Annex 1, Part 2
best to discuss your application with us as each installation can be
ABS Rules
very different in terms of chemical, smoke & toxicity requirements.
2009 Steel Vessels Rules 1-1-4/7.7, 4-8-4/21.9.4(d) & (e),
Below is an overview of our current systems: 4-8-4 Appendix 1.
Polyester (Halogen Free)
This resin is the most widely used resin systems. It offers 17. INSTALLING CABLE LADDERS CORRECTLY
good weathering properties with resistance to ultra-violet light Straights Sections
and has good corrosion resistance. The resin can also be Supports must be located so that splice joints between
formulated to meet specific fire and smoke standards and can horizontal runs sit between the support points and the
be supplied with conductive properties. quarter point of the span. Details as below:
Chemical Resistance
Fire Performance Oil & Gas
Low Smoke
Low Toxicity
Conventional Resin
Conductive Resin 10 = Best
Chart is based on Oglaend’s resin only
Exposure to High Temperatures
Waste Water
10
OGLAEND SYSTEM PROJECT LIST FOR FRP
CLIENT PROJECT LOCATION PRODUCT
Adyard Indago Abu Dhabi FOE-150 Ladders, Trays
Adyard Maersk Abu Dhabi FTE Trays-50-300 Tray Fittings
Arabian Falcon Adyard Abu Dhabi FTE Trays
Gulf Piping Offshore Abu Dhabi FOE-100 Ladders, Fittings
Maersk General products Abu Dhabi FOE Ladders (Nema 20C)
NPCC Maersk Abu Dhabi FOE Ladders and FTE and FTE Trays, Fittings (Nema 20C)
Total CLOV FPSO Angola FOE 70, FTE 50
Alfasi Desalination Plant Australia FOE 70
Leonard Electrics State Aquatic Centre Australia FOE 70
Downer EDI SSJV Desalination Plant Australia FOE 100 Ladder, Fittings HD Supports
Downer EDI SSJV Desalination Plant Phase 2 Australia FOE 100 Ladder, Fittings HD Supports
Southern Cross Electrical Pigment plant upgrade Australia FOE 100 Ladder
Vestas Wind Mill Various Windwill Park Australia Support Channels
BP Accomodation Azerbaijan FOE-100 Ladder, Fittings
BelWind Transformer Platform Belgium FOE Ladder, FTE Tray, FRP Support
London Array Transformer Platform Belgium FOE, FTE, FTE Antistatic, FRP Support
Conoco Philips RUP Bohai Bay China FOE-150 Ladders and Fittings
Conoco Philips Well Head, D,E,F Bohai Bay China FOE-150 Ladders
ETS Track Boulevard Tunnel Denmark FOE-70 Ladders
Semco Maritime Horns Rev 2 Accomodation Denmark FOE Ladders and FTE Trays
Vestas Wind Mill Various Windmill park Denmark Support Channels
Copenhagen Zoo Artic Ring Denmark FOE 70
BK Gulf Atlantis Dubai FOE-100 Ladders, FTE Trays & Fittings
BK Gulf Palm Island Dubai FOE-100 Ladders, Fittings
BK Gulf Palm Interchange Dubai FOE-100 Ladders, Fittings
Chalmers Tapti project Dubai FTE Trays & Fittings
Cumberland Electro Services DPE Fateh Dubai FTE Trays
Danway Electrical DUBAL Dubai FTE Trays and Fittings
Dubai Petroleum General projects Dubai Various FTE Trays
Hydrolink AI Shaheen Dubai FTE Tray
Innovative Technology Various project Dubai FTE Trays
JR McDermott Maersk Dubai FOE Ladders and FTE Trays, Fittings (Nema 20C)
Kaz Intertrade Oil & Gas Dubai FOE Ladders
Lamprell Various project Dubai Etin Clamps, FTE Trays, FOE Ladders
Lamprell Gulphino Dubai FTE Trays
Metito Oil & Gas Dubai FTE Trays
SBM FPSO Dubai FOE-150 Ladders (Nema 20C)
SEMCO Maritime Various project Dubai All products
Suliman Petrotech Oil & Gas Dubai FTE Trays
Alderley FZE Various project Dubai/UK FTE Trays, Fittings
Vestas Wind Mill Various Windmill Park Germany Support Channels
British Gas India Tapti project India FOE 150 Ladders (Nema 20C)
Aqua Treat Oil & Gas Jordan FTE Trays
JV Inkai Petrochemical plate Kazakhstan FOE-150 Ladders and Fittings
Sime Darby Maersk Malaysia FOE Ladders and FTE Trays, Fittings (Nema 20C)
Sime Darby Maersk Malaysia FOE-150 Ladders (Nema 16B)
Sime Darby Kumang Cluster Malaysia FOE-150 Ladders, Fittings and FTE Trays
Lynas Lamps Up Malaysia FOE Ladders (Nema 20C)
SMOE Zatwika Project Myamar FOE 150, FTE 50
DONG Energy Transformer Platform Netherland FOE Ladders
Hemworthy Pazfloor FPSO Norway FTE Tray
Siemens Norsk Hydro Norway FOE Ladders, FTE Trays and FRP Support
Avinor Sola Airport Norway FOE 70, FTE 50, Support Channels
Cegelec New Doha Airport Qatar FOE-100 Ladders
Kentech Qatar Tachnical Services Qatargas II Qatar FTE Tray
Maersk Project at Adyard Qatar FOE-150 Ladders and FTE Trays (Nema 20)
Mw Kellog Shell Pearl Qatar FOE Ladders and FTE Trays (Nema 20C)
Prochem Engineering Oil & Gas Qatar FOE Ladders
Qatar Aviation Fuels Jetty area Qatar FTE-150 Ladders
Qatar Kentz Qatargas Qatar FOE-150 Ladder
Qatar Petroleum Jetty area Qatar FOE Ladders (Nema 20C)
Washington Group International Qatargas Qatar FTE Tray
Qatar Gas Qatar Gas Modification Raslaffan Qatar FOE 150
Cegelec New Doha Airport Qatar FOE 100, FTE 50
Qatar gas Laffan Refinery Qatar FTE 50
Acciona Infraestructura Adriatic LNG Spain FOE-100 Ladders, Fittings
Viny Thai Windmill, Chemical plant Thailand FRP Tray
PTTEP Montara Thailand FRP Ladder Tray
PTTEP Bongkot Thailand FRP/Ladder Tray
PTTEP Arthit (Maintenance) Thailand FRP/Ladder Tray
Pearl Oil PPB2 Power System Thailand FRP/Ladder Tray
PTTEP Montara Thailand FRP Ladder Tray
PTTEP Bongkot (Maintenance) Thailand FRP/Ladder Tray
Pearl Oil PPB2 Power System Improvement Thailand FRP Ladder Tray
PTTEP PTTEP Bundle Project Thailand FRP/Ladder Tray
CPOC CPOC JKB Thailand FRP/Ladder Tray
CPOC CPOC MDE Thailand FRP/Ladder Tray
Salamander Salamander B Thailand FRP/Ladder Tray
PTTEP BC3 Thailand FRP/Ladder Tray
Dragon Oil Zhdanov A, Crane Vessel Turkmenistan FOE Ladders and FTE Trays
Adma Opco Zadco Central Super Complex UAE FOE 150 GA, FTE 50
Adma Opco Zadco Pressure Upgrade UAE FOE 150 GA, FTE 51
Gasco Ruwais Jetty UAE FOE 150, FTE 50
Dubai Petroleum Al Jalil Platform UAE FOE 150, FTE 50
Adma Opco Potable Water Zirku Island UAE FTE 80
Seatrax uk Al Shaheen UK FTE Trays for the cranes construction
Acciona Croydon Tunnels UK FTE-50 & FOE-100
British Fuels Not available UK FTE Trays & Fittings
Fabricom Liverpool Dock UK FTE-50, FOE-100 & Supports
Farebrother Thorton Bio Waste UK FTE-50, FOE-150 & Supports
Goodwin & Price Birmingham Queensway UK FTE-80 & Supports
Vestas Wind Mill Various WIndmill Park UK Support Channels
London Array Offshore WIndmill UK Support Channels
Vung Ang FLSmith Coal Fire Thermal Power Plant Vietnam FOE 70
11
CABLE LADDER FOE
Product selection and options
FOE Ladder Range Standard Range Product Option on Request Resin Code
Material Polyester Class 1 (C1) a. Polyester Resin Class 2 C2
FOE-70, supplied standard in C2
b. OLSTAR system, low flame, smoke & toxicity resin* AC
c. Vinyl ester VE
d. Phenolic System PH
Length 3m 6m (special sizes between 3 and 6m are possible )
Width 150-900mm 1000-1200mm (only on selected products)
Height 70,100 & 150 200mm
Rung Spacing 300mm 120-500mm
Rung Attachment SmartLok® Stainless Steel BarrelLok (available on all ladder products)
Assembly SS bolt sets with anti-vibration
flange nut
Splice Detail Full height SS/FRP splicing details
Elbow Radius 300mm 450-600 & 900mm
Angles 45˚ or 90˚ 30˚ or 60˚
* OLSTAR acrylic system ABS approved with anti static properties
GUIDELINES: To change resin system:
NOTE: Select resin code and add to article no.
For standard products just select the article number below. Example: Polyester Resin Class 2 = Art. no. 74429C2
Loading: See page 30. C1 = Standard, resin code not required.
Chemical Guide : See page 44.
Ladder accessories: See page 13-23. Loading Depth Height
Nuts and bolts: See page 42 and for full range 43.
FOE-150 NR** 121 mm 150 mm
This symbol tells you that the product
is supplied with stainless steel bolt FOE-150 GA*
4(8) sets and locking nut washers.
M10x20 (In brackets are optional). FOE-100 71 100
FOE-70 46 70
* General Application
** Nema Rated
12
CABLE LADDER FOE
Cable Ladder FOE-150 GA Nema 16B
Loading
m
13
CABLE LADDER FOE
377 437
Wid
Width th
43
7 Tee-Piece Available in 600 and 900 radius
Type C2 Art. no. Kg
W FOE-70 TE-150/150-R3 73718 5.3
id
th FOE-70 TE-200/200-R3 70308 5.6
FOE-70 TE-300/300-R3 73719 6.2
43 FOE-70 TE-400/400-R3 70309 7.0
7 FOE-70 TE-450/450-R3 73720 7.5
FOE-70 TE-500/500-R3 70310 7.9
FOE-70 TE-600/600-R3 73721 8.5
14
CABLE LADDER FOE
Splice connector Reducer Part
Splice connector to be ordered separately
separate order Type C2 Art. no. Kg
FOE-70 RP-150 73730 0.8
FOE-70 RP-200 70326 0.9
FOE-70 RP-300 73731 1.0
FOE-70 RP-450 73732 1.1
FOE-70 RP-500 73733 1.2
Simple Type C1 Art. no. Kg
left/right FOE-100 RP-150 70275 1.0
Reducer Part FOE-100 RP-300 70276 1.2
FOE-100 RP-450 70277 1.4
FOE-100 RP-600 70278 1.6
FOE-100 RP-750 70279 1.8
Reducer part is
FOE-150 RP-150 70280 1.5
complete with
FOE-150 RP-300 70281 1.9
screws and
FOE-150 RP-450 70282 2.3
FRP brackets
4 FOE-150 RP-600 70283 2.8
M10x20 FOE-150 RP-750 70284 3.2
Reducer Central
C1 Art. no.
Type Kg C1 Art. no.
Type Kg
FOE-100 RE-300/150 70327 2.5 FOE-150 RE-300/150 70338 4.7
FOE-100 RE-450/150 70328 2.6 FOE-150 RE-450/150 70339 4.8
FOE-100 RE-600/150 70329 2.7 FOE-150 RE-600/150 70340 4.9
FOE-100 RE-450/300 70330 2.7 FOE-150 RE-450/300 70341 4.9
FOE-100 RE-600/300 70331 2.8 FOE-150 RE-600/300 70342 5.0
FOE-100 RE-750/300 70332 2.9 FOE-150 RE-750/300 70343 5.1
FOE-100 RE-900/300 71447 3.0 FOE-150 RE-900/300 71450 5.2
FOE-100 RE-600/450 70333 2.9 FOE-150 RE-600/450 70344 5.1
FOE-100 RE-750/450 70334 3.0 FOE-150 RE-750/450 70345 5.2
FOE-100 RE-900/450 70335 3.2 FOE-150 RE-900/450 70346 5.3
FOE-100 RE-750/600 70336 3.1 FOE-150 RE-750/600 70347 5.3
FOE-100 RE-900/600 70337 3.3 FOE-150 RE-900/600 70348 5.4
Reducer Left
C1 Art. no.
Type Kg C1 Art. no.
Type Kg
FOE-100 RE-L-300/150 70349 2.3 FOE-150 RE-L-300/150 70360 4.3
FOE-100 RE-L-450/150 70350 2.4 FOE-150 RE-L-450/150 70361 4.4
FOE-100 RE-L-600/150 70351 2.5 FOE-150 RE-L-600/150 70362 4.5
FOE-100 RE-L-450/300 70352 2.5 FOE-150 RE-L-450/300 70363 4.5
FOE-100 RE-L-600/300 70353 2.6 FOE-150 RE-L-600/300 70364 4.6
FOE-100 RE-L-750/300 70354 2.7 FOE-150 RE-L-750/300 70365 4.7
FOE-100 RE-L-900/300 71448 2.8 FOE-150 RE-L-900/300 71451 4.8
FOE-100 RE-L-600/450 70355 2.7 FOE-150 RE-L-600/450 70366 4.7
FOE-100 RE-L-750/450 70356 2.8 FOE-150 RE-L-750/450 70367 4.8
FOE-100 RE-L-900/450 70357 3.0 FOE-150 RE-L-900/450 70368 4.9
FOE-100 RE-L-750/600 70358 2.9 FOE-150 RE-L-750/600 70369 4.9
FOE-100 RE-L-900/600 70359 3.1 FOE-150 RE-L-900/600 70370 5.0
Reducer Right
C1 Art. no.
Type Kg C1 Art. no.
Type Kg
FOE-100 RE-R-300/150 70371 2.3 FOE-150 RE-R-300/150 70382 4.3
FOE-100 RE-R-450/150 70372 2.4 FOE-150 RE-R-450/150 70383 4.4
FOE-100 RE-R-600/150 70373 2.5 FOE-150 RE-R-600/150 70384 4.5
FOE-100 RE-R-450/300 70374 2.5 FOE-150 RE-R-450/300 70385 4.5
FOE-100 RE-R-600/300 70375 2.6 FOE-150 RE-R-600/300 70386 4.6
FOE-100 RE-R-750/300 70376 2.7 FOE-150 RE-R-750/300 70387 4.7
FOE-100 RE-R-900/300 71449 2.8 FOE-150 RE-R-900/300 71452 4.8
FOE-100 RE-R-600/450 70377 2.7 FOE-150 RE-R-600/450 70388 4.7
FOE-100 RE-R-750/450 70378 2.8 FOE-150 RE-R-750/450 70389 4.8
FOE-100 RE-R-900/450 70379 3.0 FOE-150 RE-R-900/450 70390 4.9
FOE-100 RE-R-750/600 70380 2.9 FOE-150 RE-R-750/600 70391 4.9
FOE-100 RE-R-900/600 70381 3.1 FOE-150 RE-R-900/600 70392 5.0
15
CABLE LADDER FOE
Exit Plate Combine to fit actual width
4 Type FRP Art. no. Kg
M6x16
FOE EX-150 74545 0.4
150
Splice Connectors
Type FRP Art. no. Kg SS Art. no. Kg
FOE-70 SC 70396 0.2 70397 0.3
4 4(8) 4(8) FOE-100 SC 75051 0.3 74858 0.4
M6x16 M10x25 M10x25 FOE-150 SC 75045 0.5 74859 0.6
Spans up to 4m, 4 bolt sets are recommended.
Spans above 4m, 8 bolt sets are recommended.
4 bolt sets (8) bolt sets Composite bolt and nut sets are available on request.
included as are optional
standard
16
Build your own flexible riser from the components below:
To build your own flexi riser: -R6
First select the correct riser part FOE-70, 100 or 150. For medium radius
6 pcs Splice Angle plates of 30°
Then select the required splice angle 22.5°, 30° or 45°. between ladders and
2 Riser Parts
give fixed riser
Factory built flexi risers and dimensional details angle of 90°.
refer to pages 18, for article no. refer to page 19.
-R4 -R8
For small radius For large radius
4 pcs Splice Angle plates of 45° 8 pcs Splice Angle plates of 22.5°
between ladders and 1 Riser Part between ladders and
give fixed riser of 90° angle. 3 Riser Parts
Refer to table next page. give fixed riser
angle of 90°.
Refer to table next page.
Riser Part
Type C2 Art. no. Kg
FOE-70 RI-PA-150 73741 0.8
FOE-70 RI-PA-200 70403 0.8
FOE-70 RI-PA-300 73742 0.9
FOE-70 RI-PA-400 70404 1.0
FOE-70 RI-PA-450 73743 1.1
FOE-70 RI-PA-500 70405 1.1
FOE-70 RI-PA-600 73744 1.2
How to use:
Splice Angle Plates can be used to make 22.5°, Splice Angle Plates 45°/30°/22.5°
30° and 45° risers very simply and quickly. Type FRP Art. no. Kg SS Art. no. Kg
2 plates are
FOE-70 SA-VE-45 70406 0.1 74190 0.1
required to
45° FOE-100 SA-VE-45 70407 0.1 74191 0.1
build one riser.
FOE-150 SA-VE-45 70408 0.2 74192 0.2
FOE-70 SA-VE-30 70409 0.1 74193 0.1
Special angle FOE-100 SA-VE-30 70410 0.1 74194 0.1
plates like 60° FOE-150 SA-VE-30 70411 0.2 74195 0.2
can also be FOE-70 SA-VE-22.5 70412 0.1 74196 0.1
30°
offered. FOE-100 SA-VE-22.5 70413 0.1 74197 0.1
FOE-150 SA-VE-22.5 70414 0.2 74198 0.2
17
CABLE LADDER FOE
Installation measurements between ladder ends at various riser radius.
Factory Factory
fabricated fabricated
fixed risers fixed risers
FOE-70 Inside -R4 -R6 -R8
FOE-100 Inside
-R4 -R6 -R8
Factory
fabricated
fixed risers
FOE-150 Inside FOE-150 Outside
-R4 -R6 -R8
18
CABLE LADDER FOE
Factory fabricated fixed risers
FOE-70 Riser 90° Inside FOE-70 Riser 90° Outside
Type Radius C2 Art. no. Kg Type Radius C2 Art. no. Kg
FOE-70 RI-IN-90-150-R4 409 73747 1.69 FOE-70 RI-OU-90-150-R4 393 73765 1.69
FOE-70 RI-IN-90-200-R4 70415 1.72 FOE-70 RI-OU-90-200-R4 70424 1.72
FOE-70 RI-IN-90-300-R4 73748 1.79 FOE-70 RI-OU-90-300-R4 73766 1.79
FOE-70 RI-IN-90-400-R4 70416 1.91 FOE-70 RI-OU-90-400-R4 70425 1.86
FOE-70 RI-IN-90-450-R4 73749 1.99 FOE-70 RI-OU-90-450-R4 73767 1.99
FOE-70 RI-IN-90-500-R4 70417 2.03 FOE-70 RI-OU-90-500-R4 70426 2.02
FOE-70 RI-IN-90-600-R4 73750 2.09 FOE-70 RI-OU-90-600-R4 73768 2.09
FOE-70 RI-IN-90-150-R6 607 73753 2.89 FOE-70 RI-OU-90-150-R6 591 73771 2.89
FOE-70 RI-IN-90-200-R6 70418 2.97 FOE-70 RI-OU-90-200-R6 70427 3.02
FOE-70 RI-IN-90-300-R6 73754 3.09 FOE-70 RI-OU-90-300-R6 73772 3.09
FOE-70 RI-IN-90-400-R6 70419 3.26 FOE-70 RI-OU-90-400-R6 70428 3.29
FOE-70 RI-IN-90-450-R6 73755 3.49 FOE-70 RI-OU-90-450-R6 73773 3.49
FOE-70 RI-IN-90-500-R6 70420 3.56 FOE-70 RI-OU-90-500-R6 70429 3.54
FOE-70 RI-IN-90-600-R6 73756 3.64 FOE-70 RI-OU-90-600-R6 73774 3.64
FOE-70 RI-IN-90-150-R8 804 73759 4.10 FOE-70 RI-OU-90-150-R8 788 73777 4.10
FOE-70 RI-IN-90-200-R8 70421 4.20 FOE-70 RI-OU-90-200-R8 70430 4.20
FOE-70 RI-IN-90-300-R8 73760 4.34 FOE-70 RI-OU-90-300-R8 73778 4.40
FOE-70 RI-IN-90-400-R8 70422 4.40 FOE-70 RI-OU-90-400-R8 70431 4.80
FOE-70 RI-IN-90-450-R8 73761 5.00 FOE-70 RI-OU-90-450-R8 73779 5.00
FOE-70 RI-IN-90-500-R8 70423 5.10 FOE-70 RI-OU-90-500-R8 70432 5.10
FOE-70 RI-IN-90-600-R8 73762 5.30 FOE-70 RI-OU-90-600-R8 73780 5.30
FOE-100 Riser 90° Inside FOE-100 Riser 90° Outside
Type Radius C1 Art. no. Kg Type Radius C1 Art. no. Kg
FOE-100 RI-IN-90-150-R4 434 74236 2.08 FOE-100 RI-OU-90-150-R4 393 74254 2.08
FOE-100 RI-IN-90-300-R4 74237 2.18 FOE-100 RI-OU-90-300-R4 74255 2.18
FOE-100 RI-IN-90-450-R4 74238 2.28 FOE-100 RI-OU-90-450-R4 74256 2.28
FOE-100 RI-IN-90-600-R4 74239 2.38 FOE-100 RI-OU-90-600-R4 74257 2.38
FOE-100 RI-IN-90-750-R4 74240 2.48 FOE-100 RI-OU-90-750-R4 74258 2.48
FOE-100 RI-IN-90-900-R4 74241 2.68 FOE-100 RI-OU-90-900-R4 74259 2.68
FOE-100 RI-IN-90-150-R6 633 74242 3.54 FOE-100 RI-OU-90-150-R6 593 74260 3.54
FOE-100 RI-IN-90-300-R6 74243 3.74 FOE-100 RI-OU-90-300-R6 74261 3.74
FOE-100 RI-IN-90-450-R6 74244 3.94 FOE-100 RI-OU-90-450-R6 74262 3.94
FOE-100 RI-IN-90-600-R6 74245 4.14 FOE-100 RI-OU-90-600-R6 74263 4.14
FOE-100 RI-IN-90-750-R6 74246 4.34 FOE-100 RI-OU-90-750-R6 74264 4.34
FOE-100 RI-IN-90-900-R6 74247 4.74 FOE-100 RI-OU-90-900-R6 74265 4.74
FOE-100 RI-IN-90-150-R8 831 74248 5.00 FOE-100 RI-OU-90-150-R8 790 74266 5.00
FOE-100 RI-IN-90-300-R8 74249 5.30 FOE-100 RI-OU-90-300-R8 74267 5.30
FOE-100 RI-IN-90-450-R8 74250 5.60 FOE-100 RI-OU-90-450-R8 74268 5.60
FOE-100 RI-IN-90-600-R8 74251 5.90 FOE-100 RI-OU-90-600-R8 74269 5.90
FOE-100 RI-IN-90-750-R8 74252 6.20 FOE-100 RI-OU-90-750-R8 74270 6.20
FOE-100 RI-IN-90-900-R8 74253 6.80 FOE-100 RI-OU-90-900-R8 74271 6.80
19
CABLE LADDER FOE
Cable Ladder Cover
For high wind application
Type C1 Art. no. Kg/m
FOE CO-CL-150 71468 1.0
M6 bolt sets FOE CO-CL-200 71469 1.15
are used to
join panel
FOE CO-CL-300 71470 1.6
together, these FOE CO-CL-400 71471 2.15
bolts are used FOE CO-CL-450 71472 2.4
to install the
HD Cover FOE CO-CL-500 71473 2.7
Fixing Clamp FOE CO-CL-600 71474 3.15
as seen below.
Reinforcing ribs FOE CO-CL-750 71475 3.9
FOE CO-CL-900 71476 4.7
All the above wind load data was gathered from wind tunnel testing and does not simulate the actual working conditions.
Please consider this when selecting the correct clamp system for your application.
7 x 20mm
GP Cover Clamp
1
M6x16 Type SS Art. no. Kg
FOE CC 74856 0.1
20
CABLE LADDER FOE
Use 6 clamps per section Cover Flat Elbow 90°
Type C1 Art. no. Kg
FOE CO-FE-90-150 74715 0.9
FOE CO-FE-90-300 74716 1.9
FOE CO-FE-90-450 74717 3.2
FOE CO-FE-90-600 74718 4.6
FOE CO-FE-90-750 74719 6.3
FOE CO-FE-90-900 74720 8.1
HD Flexi Clamp
Cover Flat Elbow 45°
seen on page 20 are Type C1 Art. no. Kg
designed to fit all FOE
fittings to increase FOE CO-FE-45-150 74801 0.6
wind protection FOE CO-FE-45-300 74802 1.2
FOE CO-FE-45-450 74803 2.0
All covers for fittings FOE CO-FE-45-600 74804 3.1
are suppllied as one FOE CO-FE-45-750 74805 4.1
Use 4 clamps per section
piece construction FOE CO-FE-45-900 74806 5.2
Cover Tee-Piece
Type C1 Art. no. Kg
FOE CO-TE-150 74721 0.8
FOE CO-TE-300 74722 1.7
FOE CO-TE-450 74723 2.8
FOE CO-TE-600 74724 4.1
FOE CO-TE-750 74725 5.7
FOE CO-TE-900 74726 7.6
Cover Cross
Type C1 Art. no. Kg
FOE CO-CP-150 71655 1.2
FOE CO-CP-300 71656 2.0
FOE CO-CP-450 71657 3.2
FOE CO-CP-600 71658 4.4
FOE CO-CP-750 71659 6.0
FOE CO-CP-900 71660 8.0
Use the same for inside and outside risers.
Cover Flexi-Riser
Type C1 Art. no. Kg
FOE CO-FR-150 74760 0.3
FOE CO-FR-300 74761 0.6
FOE CO-FR-450 74762 0.9
FOE CO-FR-600 74763 1.2
FOE CO-FR-750 74764 1.5
FOE CO-FR-900 74765 1.8
Use the same for inside and outside risers.
30 A full range of dividers are available for all horizontal fittings and all
vertical fittings inside our outside radiuses.
4
M6x16
For assistance, please contact Oglaend System.
21
CABLE LADDER FOE
40
Fixing/Expansion Clamp
65
Type A (mm) FRP Art. no. Kg
FOE FC-A40X65 6 71410 0.06
Ø 11
1
M10x20
Sealing Kits
Acrylic Spray Acrylic Sealing Products Art. no. Volume
Sealer FRP SK-2 (brush) 74779 5L
FRP SK-1 (spray) 74780 400ml
22
CABLE LADDER FOE
«Build your own FOE ladder at site» Rung spacing standard is 300 mm.
Rung widths from 150mm to 900mm
Pre-drilled side channels in 70,100 or 150 heights,
Ask for alternative rung spacing or resin systems.
supplied in 3 or 6m lengths for easy assembly
Order 10 rungs per ladder at standard spacing of 300mm.
at site. Rungs supplied pre-slotted,
complete with the patented
SmartLok insert and SS pan FOE Side Channel
head bolts for easy assembly. Type Art. no. 6m Art. no. 3m Kg/m
FOE-70 71453 74133 0.8
FOE-100 71418 74136 1.4
FOE-150 71454 74137 2.8
FOE-150 GA 71456 71455 2.2
Maersk Al Shaheen
PTTEP
Mearsk Montara
Al Shaheen PTTEP Montara
23
CABLE TRAY FTE
Product
selection and options
FTE Tray Range Standard Range Product Option on Request Resin Code
Material Polyester Class 2 (C2) a. Polyester Class 1 with anti-static C1A
Polyester Class 1 (C1) b. OLSTAR system, low flame, smoke & toxicity resin* AC
c. Vinyl ester VE
d. Phenolic System PH
Perforations Bottom Non perforated bottom
Length 3m 6m
Width 50-100-150-200-300-400 and 600mm Contact Oglaend System for other sizes
Height 50-80mm
Assembly SS bolt sets with anti-vibration
locking nut washers as standard
Splice detail Full height SS/FRP splicing details
Elbow Radius 250mm Alternative radiuses available on request
Angles 45˚ or 90˚ 30˚ or 60˚
* OLSTAR acrylic system ABS approved with anti-static properties
GUIDELINES: To change resin system:
NOTE: For standard products select the article number below. Select resin code and add to article no.
Loading: See page 30. Example: Polyester Resin Class 1 anti-static = Art. no. 74400C1A
Chemical guide : See page 44.
Tray accessories: See pages 24-29.
Nuts and bolts: See page 42 and for full range page 43.
FTE-50 FTE-80
Loading Loading
depth depth
H: 47 80 H: 77
50
Loading
FTE-80 CT-400 424 71461 71461C1 5.1
m
depth
m
80 H: 77 B
A
24
CABLE TRAY FTE
Flat Elbows 90°
Type C2 Art. no. C1 Art. no. Kg
FTE-50 FE-90-50 74568 74568C1 0.8
FTE-50 FE-90-100 74569 74569C1 1.1
FTE-50 FE-90-150 74572 74572C1 1.3
FTE-50 FE-90-200 74570 74570C1 1.6
FTE-50 FE-90-300 74571 74571C1 2.2
FTE-50 FE-90-400 71463 71463C1 4.8
FTE-50 FE-90-600 71559 71559C1 6.5
dth FTE-80 FE-90-50 74582 74582C1 1.3
Wi
FTE-80 FE-90-100 74583 74583C1 1.5
FTE-80 FE-90-150 74581 74581C1 1.8
23
7.5 FTE-80 FE-90-200 74584 74584C1 2.1
7.5
23 FTE-80 FE-90-300 74585 74585C1 2.7
FTE-80 FE-90-400 71493 71493C1 3.2
Tee-Piece
Type C2 Art. no. C1 Art. no. Kg
FTE-50 TE-50/50 74660 74660C1 0.6
FTE-50 TE-100/100 74661 74661C1 0.7
FTE-50 TE-150/150 74659 74659C1 0.9
FTE-50 TE-200/200 74662 74662C1 1.1
50 FTE-50 TE-300/300 74663 74663C1 1.6
0
30 FTE-50 TE-400/400 71465 71465C1 2.1
0 FTE-50 TE-600-600 71561 71561C1 2.7
FTE-80 TE-50/50 74664 74664C1 0.9
FTE-80 TE-100/100 74665 74665C1 1.0
FTE-80 TE-150/150 74668 74668C1 1.2
FTE-80 TE-200/200 74666 74666C1 1.4
FTE-80 TE-300/300 74667 74667C1 1.9
FTE-80 TE-400/400 71495 71495C1 2.9
Radius Tee-Piece
Type C2 Art. no. C1 Art. no. Kg
FTE-50 TE-50-50 R3 71629 71629C1 1.7
FTE-50 TE-50-100 R3 71630 71630C1 2.4
FTE-50 TE-50-150 R3 71631 71631C1 2.8
FTE-50 TE-50-200 R3 71632 71632C1 3.2
FTE-50 TE-50-300 R3 71633 71633C1 3.7
FTE-50 TE-50-400 R3 71634 71634C1 4.0
FTE-50 TE-50-600 R3 71635 71635C1 4.3
FTE-80 TE-50-50 R3 71636 71636C1 2.5
FTE-80 TE-50-100 R3 71637 71637C1 2.9
FTE-80 TE-50-150 R3 71638 71638C1 3.4
FTE-80 TE-50-200 R3 71639 71639C1 3.9
FTE-80 TE-50-300 R3 71640 71640C1 4.3
FTE-80 TE-50-400 R3 71641 71641C1 4.8
25
CABLE TRAY FTE
Splice Connectors
Type FRP Art. no. SS Art. no. Kg
2(4) FTE-50 SC 75043 74880 0.1
M6x16
FTE-80 SC 75052 74881 0.2
Combi-Riser
Type FRP Art. no. SS Art. no. Kg
4
M6x16 FTE-50 CR-50 75046 74670 0.9
FTE-50 CR-100 75047 74671 1.0
FTE-50 CR-150 75039 74669 1.1
FTE-50 CR-200 75048 74672 1.2
Supplied FTE-50 CR-300 75049 74673 1.4
as inside FTE-50 CR-400 71642 71490 1.6
riser. Turn FTE-50 CR-600 71644 71562 2.0
the splice
FTE-80 CR-50 75072 74674 1.5
plates over
FTE-80 CR-100 75073 74675 1.6
to make an
FTE-80 CR-150 75074 74678 1.7
outside riser.
FTE-80 CR-200 75075 74676 1.8
FTE-80 CR-300 75076 74677 2.0
FTE-80 CR-400 71643 71496 2.2
26
CABLE TRAY FTE
Cover Flat Elbow 90°
Type C2 Art. no. C1 Art. no. Kg
B FTE-CO-FE-90-50 74735 74735C1 0.4
A C FTE-CO-FE-90-100 74736 74736C1 0.5
FTE-CO-FE-90-150 74739 74739C1 0.8
FTE-CO-FE-90-200 74737 74737C1 1.0
FTE-CO-FE-90-300 74738 74738C1 1.5
FTE-CO-FE-90-400 71499 71499C1 1.9
FTE-CO-FE-90-600 71651 71651C1 4.6
Cover Combi-Riser
Type C2 Art. no. C1 Art. no. Kg
FTE-CO-CR-50 74844 74844C1 0.25
FTE-CO-CR-100 74845 74845C1 0.4
FTE-CO-CR-150 74848 74848C1 0.65
FTE-CO-CR-200 74846 74846C1 0.8
FTE-CO-CR-300 74847 74847C1 1.0
FTE-CO-CR-400 71531 71531C1 1.1
FTE-CO-CR-600 71653 71653C1 1.2
Cover Tee-Piece
Type C2 Art. no. C1 Art. no. Kg
FTE-CO-TE-50 74840 74840C1 0.25
FTE-CO-TE-100 74841 74841C1 0.4
FTE-CO-TE-150 74839 74839C1 0.65
FTE-CO-TE-200 74842 74842C1 0.8
FTE-CO-TE-300 74843 74843C1 1.0
FTE-CO-TE-400 71530 71530C1 1.1
FTE-CO-TE-600 71654 71654C1 1.2
Special Request
If you have a special design requirement, please contact Oglaend System for options and availability.
27
CABLE TRAY FTE
Supply with complete Cover Fixing Clamp
profiles, rods Used in high wind application
and nuts.
Type Width FRP Art. no. Kg
Height: FTE-50 CC-HD-50 130mm 73930 0.31
Add 44mm FTE-50 CC-HD-100 180 73931 0.37
to tray height.
FTE-50 CC-HD-150 230 73929 0.43
FTE-50 CC-HD-200 280 73932 0.49
FTE-50 CC-HD-300 380 73933 0.60
FTE-50 CC-HD-400 480 71491 0.72
FTE-50 CC-HD-600 680 71563 0.82
Height =
94 / 124mm FTE-80 CC-HD-50 130 73934 0.35
FTE-80 CC-HD-100 180 73935 0.41
FTE-80 CC-HD-150 230 73938 0.47
FTE-80 CC-HD-200 280 73936 0.53
FTE-80 CC-HD-300 380 73937 0.64
FTE-80 CC-HD-400 480 71497 0.75
End Cover
Type FRP Art. no. Kg
2
M4.8x13 FTE-50 EC-50 74727 0.02
FTE-50 EC-100 74728 0.04
FTE-50 EC-150 74885 0.05
FTE-50 EC-200 74728 0.06
FTE-50 EC-300 74730 0.10
FTE-50 EC-400 71492 0.12
FTE-50 EC-600 71564 0.16
FTE-80 EC-50 74731 0.03
FTE-80 EC-100 74732 0.06
FTE-80 EC-150 74886 0.08
FTE-80 EC-200 74733 0.10
FTE-80 EC-300 74734 0.20
FTE-80 EC-400 71498 2.30
Reducer Part
Type Art. no. Kg
FTE-50 RP-50 70438 0.10
FTE-50 RP-100 70439 0.12
FTE-50 RP-150 70440 0.15
FTE-50 RP-200 70441 0.17
FTE-50 RP-300 71606 0.20
FTE-80 RP-50 70442 0.15
FTE-80 RP-100 70443 0.18
FTE-80 RP-150 70445 0.20
2 Reducer Part FTE-80 RP-200 70446 0.22
M6x16
FTE-80 RP-300 71607 0.25
Hinge Vertical
Type FRP Art. no. SS Art. no. Kg
FTE-50 HV 75044 74882 0.2
3 FTE-80 HV 75053 74883 0.3
M6x16
5
M6x16
28
CABLE TRAY FTE
Divider
4 Type H (mm) FRP Art. no. Kg/m
M6x16
FTE-50 DI 45 74540 0.4
FTE-80 DI 70 74541 0.5
H
H: 45 and 70 mm
30
Ø 11
Ø 11
Fixing Clamps Fits both ladders and trays
1 Type SS Art. no. Kg
M10x20 Ø7
11 x 20 FOE/FTE FC-B40x65 74783 0.04
Sealing Kits
Acrylic Sealing Products Art. no. Volume
Acrylic Spray
Sealer
FRP SK-2 (brush) 74779 5L
FRP SK-1 (spray) 74780 400ml
29
LOAD TABLE FOR OGLAEND SYSTEM
FOE CABLE LADDER & FTE TRAYS
SAFE WORKING LOAD (SWL) KG/M - BASED ON IEC 61537
Span (ft) 4.9 6.6 8.0 9.8 12.0 13.1 14.8 16.0 18.0 20.0
Span L (mm) 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000
SWL Load (kg/m) kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m
FTE CABLE TRAYS, ISO POLYESTER
74400 FTE 50-P-50 180 100 70 40
74401 FTE-50-P-100 190 105 90 50
74399 FTE-50-P-150 200 110 105 55
74402 FTE-50-P-200 240 130 115 60
74403 FTE-50-P-300 300 140 135 76
71460 FTE-50-P-400 390 220 150 80
71557 FTE-50-P-600 450 250 160 90
74410 FTE-80-P-50 260 120 100 65 45
74411 FTE-80-P-100 285 130 107 70 47
74409 FTE-80-P-150 320 155 110 76 50
74412 FTE-80-P-200 350 190 130 80 55
74413 FTE-80-P-300 520 250 190 130 85 70
71461 FTE-80-P-400 650 360 250 160 110 90
• IEC 61537 data indicates a minimum safety factor of 1.7
• Text in BOLD are actual results.
SAFE WORKING LOAD (KG/M) - UNIFORM DISTRIBUTED LOAD - BASED ON IEC 61537
Product Type FOE-70 FOE-100 FOE-150GA FOE-150 FOE-150 FOE-150
Resin System ISO POLYESTER ISO POLYESTER ISO POLYESTER ISO POLYESTER OLSTAR SYSTEM PHENOLIC SYSTEM
Load (kg/m) (kg/m) (kg/m) (kg/m) (kg/m) (kg/m) (kg/m)
FOE CABLE LADDERS
Span (mm) 1500 420 790 850 920 940 –
2000 185 600 700 870 900 –
2500 109 500 580 700 830 –
3000 63 325 500 640 780 –
3500 – 178 390 610 700 –
4000 – 130 350 530 580 –
4500 – 90 310 430 410 –
5000 – 75 220 304 330 –
5500 – 52 145 210 230 –
6000 – 39 130 156 162 170
• IEC 61537 data indicates a minimum safety factor of 1.7.
Unless otherwise stated, data above is theoretical and based on simple beam uniformed distributed load. Text in BOLD are actual results.
FIGURE 1 FIGURE 2
SWL Loading Test Procedure (2004) Uniformly Distributed Load
L L/5 0.4L
L/2 L/2
L : Supporting Distance Measurement
: Support Of Deflection
: Cable Tray Joint 1) All of the loading data shown in the 2) Load tests for NEMA FG-1 are carried out on a section of
: Cable Tray cataloque for IEC 61537 are achieved in the cable ladder non-fixed at both ends as per Figure 2
Ref.: IEC Pub. 61537 “ Cable Tray Systems accordance to the above Figure 1. and conducted up to destruction of the product.
and Cable Ladder Systems for Cable Management”
30
FRP / GRP MULTIDISCIPLINE
SUPPORT SYSTEM
Being first is good, being smart is better, being both is Simply the Best! 31
MultiGrid™ – The Most Complete
THIS IS HOW YOU GET STARTED:
Choose starters according to the required load capacity
Increased load capacity
We offer
welded starters
for whatever
support solution
you need!
The Mekano™ Support Channels See the full range in our MultiGrid catalogue.
Increased load capacity
Choose channels according to the required load capacity
32
Multidiscipline Support System
The FRP Support System is independent, still integrated in the MultiGrid™ steel concept
Choose starters according to the required load capacity
Increased load capacity
Cold Work
Starting Brackets
for Bolting and
clamp on.
Eliminate the
need for
HOT WORK.
We offer
bolted starters Hot Work
Starting Brackets
for whatever for Welding.
support solution
you need! The FRP Support
System is secured
to main structure
with various starter
brackets.
See full range on
page 35.
Cold Work
Solutions with
FRP channels
The FRP Support Channels and parts.
combined with FRP or Steel Starters
give required load capacity.
See page 34.
Load Data for max. Dead Weight Vertical Safety 2. Max “dead weight load” for each hanger is
2500 kg with use of 4pcs M10 bolt in each leg.
Type U-Frame Load data for typical industrial support Channel CH100-1 Max load in kg
Safety factor x 2 included. Bolt dim. M10.
Point load Support Width = W
Channels* Point UDL
W (m) Single/Double Load (kg) Load (kg)
2.00 Single 140 140
2.00 Double 345 345
W
1.75 Single 172 196
UDL load 1.50 Single 245 326
1.25 Single 312 499
1.00 Single 340 680
* Only the horizontal channel is double (Back to back).
All verticals are single.
Max bending moment for the bolted connection is 612 Nm.
34
Support Channels Type FRP C2 Art. no. Kg/m
These channels are the basic support channels when combined S-M FRP CH100-1-6 74991 2.15
with steel brackets specially developed by Oglaend System, will give S-M FRP CH53-1-6 73642 1.60
the unique FRP Smart Support Solution. S-M UNO CH45-1-U-6 71370 1.34
S-M UNO CH43-1-U-6 71371 1.12
S-M FRP CH42-1-6 73632 0.93
S-M UNO CH42-1-U-6 74480 0.87
100 50 42 24 45 43 43 43 53 55 42 42
Y X
X Y
Sectional Properties
X Axis Y Axis
Height Width Weight Area Ix Cx Rx Iy Cy Ry
Art. no. (mm) (mm) (kg/m) (mm2) (mm4) (mm) (mm) 4
(mm ) (mm) (mm)
71370 Heavy duty 43 45 1.34 688 144100 22.5 14.47 203415 18.98 17.19
71371 Medium/Heavy duty 43 43 1.12 575 126081 21.50 14.81 161322 19.62 16.76
74480 Light duty 42 42 0.87 464 95837 21.0 14.37 133232 18.49 16.94
1 bolt 1(2)
M10x50
B How to use:
For Beam Clamp Light Support
Use U-channel adapted to beam width + 100mm.
2 bolts Add Beam Clamp Light after adapting them to the flange height (B).
35
Beam Clamp and Starter Bracket
Fits beam widths 200-300mm, supplied complete with brackets and
bolt set. Give strong support for Back to Back Beam 100x100.
Type SS Art. no. Kg
4 S-FRP FC-BC (Beam C) 73634 5.2
M10x30
For Beams S-FRP FC-BS (Bolt Support) 73636 1.2
For Concrete The Starter Bracket provides the same advantages as concrete constructions.
Fix with 4 expansion bolts M10x60. Supplied.
4
M10x60 Every connection point with Gusset Plates need 8 bolt sets:
S-M HE-M10x30 1371327
4 S-M NU-FL-M10 1371973
M10x30
Supplied as bolt set ordering gusset plates.
How to use: For easy and quick installation use our Smart Jigs for
pre-drilling the 8 holes. See next page.
65 40 Fixing/Expansion Clamp
Type A (mm) FRP Art. no. Kg
FOE FC-A40X65 6 71410 0.06
36
Back to Back
Sealing Kits
Acrylic Spray Acrylic Sealing Products Art. no. Volume
Sealer FRP SK-2 (brush) 74779 5L
FRP SK-1 (spray) 74780 400ml
Spacer Plate
for Double Channel Support
Type C2 Art. no. Kg
1 S-FRP SH-100x50 74996 0.05
M10x30
How to use: Place the plate between the channel ends and hold
with a clamp when drilling through.
See our special Smart Jigs above.
1 1
M10x30 M10x70
37
!
NEW Build your own
TRAPEES SUPPORT
Part Description Length Dia Pack FRP Art. no. Kgs
(mm) (mm) /m
Uno Channel
S-M UNO CH42-1-U-6 6000 – – 74480 0.87
S-M UNO CH43-1-U-6 6000 – – 71371 1.12
S-M UNO CH45-1-U-6 6000 – – 71370 1.34
TFRP Threaded Rod
S-FRP TR-M10-1500 1500 M10 – 71364 0.15
TPU Nuts
NU-FL-M10 (40 LF) M10 – 25 71362 0.007
NU-FL-M10 (26 SF) M10 – 25 71365 0.007
Support Washer
S-M Washer 50x37 – 25 71552 0.02
TPU Bolts
Loading for a TPU S-M HE-M10x40 (40 LF) 40 M10 25 71359 –
one nut fixing = S-M HE-M10x40 (26 SF) 40 M10 25 71413 –
240kgs Fixing/Expansion Clamp
FOE FC-A40x65 – – – 71410 0.06
Safety factory = 3 TPU Nut for UNO Channels
S-UNO NU-M10 (CN-43) – M10 25 71551 –
CENTRAL SUPPORT
Top Type Depth Length Loading FRP Art. no. Kg
!
NEW
(mm) (mm) (kgf)
S-FRP CS-50-150 500 135 310 71440 1.9
S-FRP CS-50-200 500 235 300 71441 2.2
S-FRP CS-50-300 500 335 300 71442 2.5
S-FRP CS-50-400 500 435 260 71443 2.8
S-FRP CS-50-500 500 535 245 71445 3.1
S-FRP CS-50-600 500 635 240 71446 3.4
D Post Safety factor = 3
Threaded Rod
60 90 Type FRP Art. no. Kg
A S-FRP TR-M10-1500 71364 0.15
Glass filled Polyurethane Nut
Type Pack FRP Art. no. Kg
S-FRP NU-FL-M10 25 71365 0.007
38
Heavy Duty FRP
NEW Cantilever Arm
& Type
Dim L
(mm)
UDL
Kgf
C2
Art. no.
Weight
Kg
improved FRP CA-HD-100 135 390 70448 1.0
FRP CA-HD-150 185 380 70449 1.1
FRP CA-HD-200 235 370 70450 1.2
L FRP CA-HD-300 335 325 70271 1.5
FRP CA-HD-450 485 225 70272 1.9
FRP CA-HD-600 635 215 70273 2.1
FRP CA-HD-750 785 200 70274 2.3
FRP CA-HD-900 985 170 71553 2.6
UDL = Uniformly Distributed Load - safety factor = 3.
Longer supports can be supplied upon request.
cc
Toggle Clamp
39
FRP Profile Description:
Channels Dimensions mm Shape Stock 3m 6m C1 C2 VE Kg/m Art. No. Art. No. Color
H x W x T x (T) C1 C2
S-M FRP CH100-1-6 100 x 50 x 6 x x x x NS 2.15 74991C1 74991 RAL7040
S-M FRP CH53-1-6 53 x 55 x 7 x 5 x x x x NS 1.6 73642C1 73642 RAL7040
Channel Strut
S-M UNO CH43-1-U-6* 43 x 43 x 4 x x x x NS 1.12 71371C1 71371 RAL7040
S-M UNO CH45-1-U-6* 45 x 43 x 5 x x x x NS 1.34 71370C1 71370 RAL7040
S-M UNO CH42-1-U-6* 42 x 42 x 3 x x x x NS 0.87 74480C1 74480 RAL7040
S-M FRP CH42-1-6 42 x 24 x 5 x 3 x x x x NS 0.93 73632C1 73632 RAL7040
Flat Sheet
926 x 3000 x 3 x x x NS 5.3 74143C1 — RAL7040
136 x 3000 x 6.35 x x x NS 1.6 74146C1 — RAL7040
Rectangular Box
RU-LW-3000 37 x 20 x 3000 x x x x x NS 0.5 74479C1 74479 RAL7040
Equal Angle
50 x 50 x 5 x x x x NS 0.9 74120C1 74120 RAL7040
50 x 50 x 3 x x x x NS 0.6 74121C1 74121 RAL7040
75 x 75 x 6 x x x x NS 1.56 71534C1 71534 RAL7040
101 x 101 x 6.4 x x x x NS 2.5 71535C1 71535 RAL7040
152 x 152 x 6.4 x x x x NS 3.61 71536C1 71536 RAL7040
Unequal Angle
100 x 50 x 6 x 6 NS x x x NS 1.65 71533C1 71533 RAL7040
Square Box
50.8 x 50.8 x 6.35 NS x x x NS 2.1 74126C1 74126 RAL7040
Wide Flange Beam
102 x 102 x 6.4 NS x x x NS 3.6 71537C1 71537 RAL7040
152 x 152 x 6.4 NS x x x NS 5.45 71538C1 71538 RAL7040
203 x 203 x 9.5 NS x x x NS 10.85 71539C1 71539 RAL7040
I Beam
102 x 50 x 6.4 NS x x x NS 2.4 71540C1 71540 RAL7040
152 x 76 x 9.5 NS x x x NS 5.3 71541C1 71541 RAL7040
305 x 152 x 9.5 NS x x x NS 10.75 71542C1 71542 RAL7040
40
Typical Coupon Properties
Typical coupon properties of Oglaend System Reinforced
Plastics structural fiberglass channels (Standard, Polyester &
Vinylester fire retardant shapes). Properties derived per the
ASTM test method. Surface veil and ultraviolet inhibitors are
standard in all channels.
41
SPECIAL SCREWS FOR FRP PRODUCTS: Please also study the following page.
Type Where to use Art. no.
Self-Tapping SS Screws FOR END COVER
MARUTEX M4.8 x 13 mm 1371373
S-M PS-M10 x 25 FOR FOE-150 & -100 SPLICE PLATES
Pan head with star and flange nuts 74139
S-M LS-NU-M6 x16 FOR FTE SPLICE PLATES & FOE COVER
Locking sets with pan head and flange nuts 74140
TPU Bolts
S-M HE-M10 x 40 TPU 40 LF M10 40 190 6 25 71359
S-M HE-M10 x 40 TPU 26 SF M10 40 140 6 25 71413
Stud Bolts
S-M HE-M10 x 30 FRP M10 30 240 8 25 71487
S-M HE-M10 x 50 FRP M10 50 240 8 25 71488
S-FRP TR-M10-80 FRP M10 80 240 8 25 71489
SmartLock Insert in SS
for Rung fixing
Metal Pin M8 SS — — — — 25 71354
42
HUSK: Skruer er inkludert!
REMEMBER: Screws are included!
STD. packs PG. HDG SS
SKRUER
/ SCREWS TYPE PG+HDG / SS Art. no. Art. no. Art. no.
M 6 x 12 * S-M LS-NU-M6x12 200 1372750 1371981
LÅSESKRUER M 6 x 16 * S-M LS-NU-M6x16 200 84487
LOCKING BOLT SETS M 6 x 20 * S-M LS-NU-M6x20 100 1371982
*) Low m/linsehode og flensmutter M 6 x 30 S-M LS-NU-M6x30 100 1372749 1371361
With pan head and flange nuts M10 x 20 * S-M LS-NU-M10x20 100 1371983
M10 x 25 * S-M LS-NU-M10x25 100 1371980 1371437
Self-Lock only in SS M10 x 50 S-M LS-NU-M10x50 50 1371589 1371362
M 6 x 12 * S-M LS-M6x12 200 1372167 1372161
M 6 x 16 * S-M LS-M6x16 200 84493
LÅSESKRUER M 6 x 25 DIN 603 S-M LS-M6x25 200 / 100 1372169 1372162
LOCKING BOLTS M 6 x 50 DIN 603 S-M LS-M6x50 200 / 100 1371360 85520
*) Low M10 x 20 * S-M LS-M10x20 200 / 100 1372163
M10 x 25 * S-M LS-M10x25 100 / 50 1372765
M10 x 30 DIN 603 S-M LS-M10x30 100 / 50 86008 89821
M10 x 35 DIN 603 S-M LS-M10x35 100 82709
High M10 x 50 DIN 603 S-M LS-M10x50 50 89822
M10 x 70 DIN 603 S-M LS-M10x70 50 81396
M 6 x 12 DIN 933 S-M HE-M6x12 200 1372780
SEKSKANTSKRUER M 6 x 16 DIN 933 S-M HE-M6x16 200 1372171 1371318
HEXAGONAL BOLTS M 6 x 20 DIN 933 S-M HE-M6x20 200 1372172 1371319
M 6 x 30 DIN 933 S-M HE-M6x30 200 1371320
M 8 x 20 DIN 933 S-M HE-M8x20 200 1371301 1371321
M 8 x 25 DIN 933 S-M HE-M8x25 200 1371302 1371322
Lengre utgaver M 8 x 30 DIN 933 S-M HE-M8x30 200 1371303 1371323
leveres i DIN 931 M10 x 16 DIN 933 S-M HE-M10x16 100 1372178 1371324
delgjenget. M10 x 20 DIN 933 S-M HE-M10x20 200 / 100 1371304 1371325
M10 x 25 DIN 933 S-M HE-M10x25 200 / 100 1371305 1371326
Longer lengths M10 x 30 DIN 933 S-M HE-M10x30 200 / 100 1371306 1371327
in DIN 931 M10 x 35 DIN 933 S-M HE-M10x35 100 1371307 1371328
M10 x 45 DIN 933 S-M HE-M10x45 100 1371308 1371329
partly threaded. M10 x 50 DIN 933 S-M HE-M10x50 100 1371309 1371330
M10 x 55 DIN 933 S-M HE-M10x55 100 / 50 1371310 1371331
M12 x 25 DIN 933 S-M HE-M12x25 100 1371311 1371332
M12 x 35 DIN 933 S-M HE-M12x35 100 1371312 1371333
M12 x 45 DIN 933 S-M HE-M12x45 100 / 50 1371313 1371334
Spisset / Cone point M10 x 40 DIN 933 S-M HE-M10x40 100 1371314 1371335
M 6 x 16 DIN 7985 S-M PS-M6x16 200 1372164 1372156
LINSESKRUER M 6 x 20 DIN 7985 S-M PS-M6x20 200 1372842 1372157
PAN HEAD SCREWS M 6 x 25 DIN 7985 S-M PS-M6x25 200 84954 1372158
With Torx T30 M 6 x 30 DIN 7985 S-M PS-M6x30 200 1372166 1372159
M 6 x 40 DIN 7985 S-M PS-M6x40 100 1372168 1372160
BITS for torx T30 conical Bits conical Torx T30 1371417
6 mm DIN 6923 S-M NU-FL-M6 200 1372843 1371971
FLENSMUTTERE 8 mm DIN 6923 S-M NU-FL-M8 200 1372831 1371972
FLANGE NUTS 10 mm DIN 6923 S-M NU-FL-M10 200 1372832 1372180 1371973
Self-Lock only in SS 12 mm DIN 6923 S-M NU-FL-M12 200 1371343
M 6 x 10 DIN 934 S-M NU-M6 100 1372844 1372781
SEKSKANTMUTTERE M 8 x 13 DIN 934 S-M NU-M8 100 1372176 1371340
HEXAGONAL NUTS M10 x 17 DIN 934 S-M NU-M10 100 / 50 1372845 1371341
M12 x 19 DIN 934 S-M NU-M12 100 / 50 1372179 1371342
5x30.5x1.5 S-M WA-5x30.5x1.5 200 84394
SKIVER 6x12x1.6 DIN 125 S-M WA-6.4x12x1.6 200 1372782
WASHERS 6x18x1.6 DIN 125 S-M WA-6.4x18x1.6 200 1372175 1371349
OD Type codes: 6x25x1.5 S-M WA-6x25x1.5 200 1372848 1371350
Ø t= 8x16x1.6 DIN 125 S-M WA-8.4x16x1.6 100 1372849 1371345 1371351
8x40.3x1.5 S-M WA-8x40.3x1.5 200 84345
10.5x20x2 DIN 125 S-M WA-10.5x20x2 100 1372850 1371352
10.5 x 20 x 2
12x24x2.5 DIN 125 S-M WA-13x24x2.5 100 1371346 1371353
7x30.4x1.5 S-M WA-7x30,4x1,5 200 84562
11x32x1 S-M WA-11x32x1 200 1371354
7x35x2 S-M WA-7x35x2 200 1371594
10x(29x33)x3 S-M WA-10x(29x33)x3 200 84110
M 6 DIN 6798 S-M SW-M6 200 1372852 1371355
STJERNESKIVER M8 DIN 6798 S-M SW-M8 100 1371356
STAR WASHERS M10 DIN 6798 S-M SW-M10 100 1372854 1371357
M12 DIN 6798 S-M SW-M12 100 1371359 1371358
M 6 x 40 S-M AC-6x40 100 1372767
EKSPANSJONSBOLTER M 6 x 52 S-M AC-6x52 100 1371368
CONCRETE ANCHOR BOLTS M 8 x 50 S-M AC-8x50 100 1372768 1371369
Kvaliteter: V.G. = 5.8 M 8 x 60 S-M AC-8x60 100 1371364
Qualities: S.S. = A4-70 M10 x 60 S-M AC-10x60 50 1372769 1371365 1371370
P.G. = 5.8 M10 x 92 S-M AC-10x85 50 1371366 1371371
M12 x 110 S-M AC-12x110 25 89823
SELVBORENDE SKRUER i 100-pakn. / SELF-TAPPING SCREWS in packs of 100
Inntil/Up to 1 mm stålplate/steelplate 4,2 x 13mm 32-PH 100 1349417
Inntil/Up to 3 mm stålplate/steelplate 4.2 x 14mm 34-PH 100 1372820
Inntil/Up to 3 mm stålplate/steelplate 4.2 x 25mm 36-PH 100 1372821
SELVBORENDE RUSTFRIE SKRUER / SELF-TAPPING STAINLESS STEEL SCREWS
For opptil 2.5mm tykkelse 4.8 x 13 mm M
ARUTEX M4.8x13 SS in A2 quality 100 1371373
For up to 2.5mm thickness 4.8 x 25 mm M
arutex M4.8x25 SS in A2 quality 100 1371374
Bits for Marutex Bits 1371375
Maks tiltrekningsmoment / Max tightening torque for Self-Lock Flange Nuts: M6 = 8-10Nm, M8 = 20-23Nm, M10 = 40-45Nm, M12 = 80-85Nm
43
PG = 4-7 my zink. HDG = 40-70 my zink. SS = A4-70 (Hex = A4-80)
Chemical exposure chart
The information compiled in this exposure chart is related to data collected from actual projects installed in the field.
Temperatures used are neither minimum nor maximum but represents a cross section of test conditions.
Some products may be suitable for higher temperatures but individual testing should be carried out prior to installation.
Please contact Oglaend System for any special applications you may have.
RESIN SELECTION
Isophthalic ISOFR Uses modified premium grade Isophthalic polyester resins.
Fire retardant and complies with ASTM E 84 and ASTM D635
Vinyl ester VEFR Uses vinyl ester fire retardant resin and complies with ASTM E 84 and ASTM D635
1. Always observe common safety procedures. than a clean edge. Excessive heat will burn resin
When a circular power saw is used, always wear and fiberglass.
safety glasses, suitable dust mask and gloves.
5. Support the fiberglass profile material rigidly
2. Overalls or suitable clothing would also protect during the cutting or drilling process. Movements
the operator during sawing or cutting, machining may cause chipping at the profile edges.
or sanding operations. Although the dust created
is non-toxic and presents no serious health 6. Always touch-up or seal any cut surfaces or
issues, it can cause skin irritation. The amount edges of the fiberglass shape before installing as
of irritant varies among different individuals and this will prolong the service life.
can be reduced or eliminated by use of protective 7. When installing cable ladder or tray product from
clothing and/or protective creams. Oglaend, ensure that you use original parts which
3. Avoid excessive pressure when sawing or drilling. make up part or all of the main support system,
Excessive force can wear the tooling down for example splice plates, fittings, fixing clamps
(Diamond or carbide grit edged saw blades, and FRP supports. The use of non Oglaend’s
carbide tip drill bits are best suited for fiberglass). product in your management system could affect
the loading performance and warranty of the total
4. Refrain from generating excessive heat in any system.
sawing or drilling operation. Excessive heat
softens the resin thus resulting in a rough rather
45
PRODUCT PORTFOLIO
Oglaend System offer a broad range of cable support systems for all applications,
e.g. cabIe Iadders, cable trays, junction box racks, tubing clamps, cable cleats,
heating cables, control systems etc.
If you need further information, please do not hesitate to contact us!
Company presentation
46
SALGSKONTORER
LOCATIONS
HOLDING COMPANY Russia (St. Petersburg) AGENTER - FORHANDLERE/ Iceland
Øglænd Industrier AS Oglaend System Russia AGENTS - DlSTRlBUTORS Smith & Norland
P.O. Box 133 Tel.: + 7(812) 313 1580 Abu Dhabi Tel.: + 354 52 03 000
NO-4358 Kleppe Fax: + 7(812) 313 1580 Proserv Albadie LLC Fax: + 354 52 03 011
Tel.: + 47 51 78 81 00 Email: info@oglsys.ru Tel.: + 971 26 27 73 70 Email: sminor@sminor.is
Fax: + 47 51 78 81 60 www.oglaend-system.ru Fax: + 971 29 27 79 72 www.sminor.is
www.oglaend-system.com Email: proserv@emirates.net.ae
Singapore (South East Asia) www.proserv.no lndonesia
DATTERSELSKAP/SUBSIDIARY Oglaend System Singapore Pte. Ltd. PT. Multi Tarex MuIia
Norway Tel.: + 65 67 48 82 78 Australia Tel.: + 62 21 3983 5337
Øglænd System AS Fax: + 65 67 48 86 15 J. T. Day Pty. Ltd. Fax: + 62 21 3983 5340
P.O. Box 133 Email: oglaend.system@pacific.net.sg Tel.: + 61 8 9303 2248 Email: agus@multitarex.co.id
NO-4358 Kleppe Fax: + 61 8 9303 2446 www.multitarex.com
Tel.: + 47 51 78 81 00 Sweden Email: enquiries@jtday.com.au
Fax: + 47 51 78 81 60 Ögländ System AB www.jtday.com.au Italy
Fax sales office: + 47 51 78 81 61 Tel.: + 46 40 45 74 60 Piemme Broker S.R.L.
Email: oglaend@oglsys.no Fax: + 46 40 45 67 25 Brazil Tel.: + 39 02 906 33621
www.oglaend-system.com Email: oglaend-system@oglsys.se M.O.TECH do Brazil Fax: + 39 02 906 32036
Tel.: + 55 21 2532 2101 Email: m.maiandi@pmbroker.it
Denmark UK Fax: + 55 21 2517 2437 www.pmbroker.it
Øglænd System AS Oglaend System UK Ltd. Email: motech@motech.com.br
Tel.: + 45 86 88 66 66 Tel.: + 44 121 552 9662 www.motech.com.br Malaysia
Fax: + 45 86 88 66 67 Fax: + 44 121 544 6627 Offshore Industries Sdn Bhd
Email: oglaend-system@oglsys.dk Email: oglaend.system@oglsys.co.uk Brunei Tel.: + 6 03 92 84 0613
Shinba Integrated Engineering Services Fax: + 6 03 92 84 1051
Dubai (Middle East) USA Tel.: + 673 333-1489 Email: oisbkl@tm.net.my
Oglaend Industries Middle East Oglaend System USA Fax: + 675 333-6333
Tel.: + 971 4 887 8134 Tel.: +1 832 288 4452 Email: info@shinbaies.com Poland
Fax: + 971 4 887 8143 Email: sales@oglsys-us.com Nd Service Sp. Z.O.O.
Mobile: + 971 50 55 86 183 Canada Tel.: + 48 665 070 111
Email: sales@oglaend.ae Korea Apel/CSA Enterprises Email: wojciech.pedzich@ndservice.pl
Oglaend System Korea Co Ltd Tel.: + 1 902 450 5647 www.ndservice.pl
Tel.: + 82 518 320 761 Fax: + 1 902 450 5286
Malaysia Email: urquhart@csarep.com
Fax: + 82 518 320 762 Thailand
Oglaend Industries Sdn Bhd www.csarep.com
Email: oglaend@oglaend-system.co.kr Probity International Co Ltd.
Tel.: + 6 03 51 922 049
Tel.: + 66 2 710 6146 Ext. 107
Fax: + 6 03 51 922 039 NOSO Ltd.
SALGSKONTORER/SALES OFFICES Fax: + 66 2 710 6147
Mobile: + 6 016 9565 532 Tel.: + 1 709 782 2645
Norway Email: ak@probity.co.th
Email: sales@oglaendind.com Fax: + 1 709 782 0534
Øglænd System AS, Division Oslo: www.probity.co.th
Email: fraser@oglaendind.com
Tel.: + 47 22 25 15 10 Email: mshinkle@coil.ca
Fax: + 47 22 25 25 21 www.noso.ca The Baltic States
The Netherlands Bastini OÜ
Oglaend System BV Øglænd System AS, Division Ålesund: Finland Tel.: + 372 660 5811
Tel.: + 31 1804 14 204 Tel.: + 47 70 19 09 50 Elmarino - Shipping OY Fax: + 372 660 5812
Fax: + 31 1804 19 395 Fax: + 47 70 19 09 51 Tel.: + 358 22 54 61 00 Email: sales@bastini.ee
Email: rfq@oglaend-system.nl Fax: + 358 22 54 62 76
Øglænd System AS, Division Trondheim: Vietnam
Tel.: + 47 73 80 99 70 Finn H&T Group Oy MT Corp.
Fax: + 47 73 80 99 77 Tel.: + 358 45 630 4004 Tel.: + 848 821 0373
Fax: + 358 3 575 2550 Fax: + 848 821 0358
Email: teppo.kuivanen@finnhtgroup.fi Email: mail@mt-co.com
FRP products are www.finnhtgroup.fi
stocked in bulk volume
at various locations
around the world.
Contact your nearest
office for more details.
•
*• ••
•
•
•
•
X•
•
Oglaend System´s goal is to develop systems that are better, simpler and
more economic.