Professional Documents
Culture Documents
APPLICATION
The STERIS 5085 General Surgical Table is a mobile,
electrohydraulically operated surgical table designed to
support virtually all general and bariatric surgical
procedures including cardiac and vascular, endoscopic,
gynecology, urology, nephrectomy, neurology,
ophtalmologic and orthopedics with the addition of STERIS
table accessories.
DESCRIPTION
The STERIS 5085 General Surgical Table is a mobile,
electrohydraulically operated surgical table specifically
designed to provide patient positioning flexibility required
(Typical only - some details may vary.)
for modern surgical care facilities. The STERIS 5085 General
Surgical Table features powered lateral tilt, Trendelenburg/ Weight:
Reverse Trendelenburg, Zip-Slide™ movable tabletop and 820 lb (372 kg) approximate.
adjustable height functions. This table is designed to
The standard table configuration includes:
function with:
• Power adjustable height, back, leg, Trendelenburg, Zip-Slide
• 1200 lb (544 kg) load; with the ability to raise/lower but
movable tabletop, radiolucent Kidney™ elevator mechanism,
no tabletop articulation or slide.
flex/reflex, and lateral tilt functions.
• 1000 lb (454 kg) load; with the ability to perform all
• Manual, removable, adjustable head section.
patient posturing but without tabletop slide.
• Pendant hand control.
• 600 lb (272 kg) load; with the ability to perform all
patient posturing and full tabletop slide. • Mobile base with hydraulically operated self-compensating
floor locks.
The STERIS 5085 General Surgical Table is constructed of
aluminum alloy, stainless steel, and other high quality
materials. The table is equipped with a large sliding tabletop
STANDARDS
providing maximum radiological access without patient
STERIS 5085 General Surgical Tables are in compliance with the
reversing.
following
The STERIS 5085 General Surgical Table is powered by standards:
either internal battery or facility electric through use of the
• Underwriters Laboratories (UL) Standard 60601-1 –
INTELLIPOWER® dual power system. 2nd Edition, as certified by ETL.
The table control system accepts positioning commands • Standard CSA-C22.2 No. 601.1-M90, Standard for Electro-
from three sources: Medical Equipment, as certified by ETL (pending).
1. A primary Hand Control. • IEC 60601-1: 1993, 2nd Edition, 1995, Electrical Safety, as
2. Physician-controlled foot control (which includes certified by ETL.
Trendelenburg Tilts, Lateral Tilts and Height functions).
• IEC 60601-1-2: 2001, Electromagnetic Compatibility, as
3. Backup Hand Control functions as override to primary certified by ETL.
Hand Control. Located in table base.
• EN 55011: Group I, Class A, Emissions Testing, as certified
Overall size (W x L x H):
by ETL.
20 x 81 x 22.8 to 42.5" (508 x 2057 x 581 to 1080 mm).
Item ________________________
Location(s)___________________
____________________________
SD901 (12/01/10)
Dimensions are typical -
drawing is not to scale.
1
15
16
3
12
5
14
13
6 8
9
7 6
11 10
KEY:
1 Head Section 10 Primary Fuses
9 Ground Equalization Terminal (Male Connection) 18 Foot Pump (Hydraulic) Pedal (Not Shown)
2
• IEC 60601-1 Medical Electrical Equipment Part 1
Dimensions are inches (mm). Society of Dimensions are typical -
General Requirements for Safety. 2nd Edition, as Automotive Engineers (SAE) measurements drawing is not to scale.
certified by ETL. are approximate based on metric dimensions.
• IEC 60601-1-6 Medical Electrical Equipment Part 1-6: 43 16 21.5
Collateral Standard: Usability 2006, 2nd Edition, as (1095) (395) (548)
certified by ETL (pending).
• IEC 60601-2-46 – 1st Edition, as certified by ETL.
• CE Marked to Medical Device Directive, Column
93/42/EEC (pending).
• Title 21 - FDA, Part 820 - Quality System Regulation.
• Class 2 Equipment.
18 (454)
• Type B Equipment. 25 39.5
16 (395) (1002)
• IPX-4 (Fluid Ingress Protection), as certified by ETL. (641)
3
See Primary Hand
Control LCD Display
LED
Touch Pads
LED
Primary Hand Control LCD Display
LED
• TILT LEFT/ TILT RIGHT
LED • LEVEL
• STOP
NOTE: The LCD Display values are approximate. Their
accuracy may vary according to environmental conditions (e.g.,
Primary Hand Control
altitude, humidity, temperature). Also, if a sensor is not operating
properly, the value indicated may be incorrect. Check patient
input signals to activate table functions and articulations. LED
positioning visually before proceeding.
indicators, LCD Display (see illustration) and soft keys provide
Foot Control System can be actuated at any time and will
the following table operation information:
allow table operation in the event of primary control or power
LCD includes: malfunction. A pedal (foot pump) provides hydraulic power if
• Auto Limit Sensors necessary. This foot pedal is located at the side of the table
• Battery Power base. UNLOCK and SLIDE functions do not require foot pump
• Low Battery actuation.
• Maintenance Required Backup (Override) Control System can be actuated at any
• Tabletop Positioning (FLEX/REFLEX, SLIDE HEAD/FOOT, time and will allow table operation in the event of primary control
BACK UP/DOWN, LEG UP/DOWN and KIDNEY UP/ or power malfunction. A pedal (foot pump to provide hydraulic
DOWN) power) and Backup Hand Control (see illustration) comprise
this system. The hand control is located at table leg end behind
LEDs include:
a cover plate and stored in the table base. The foot pedal is
• FLOOR LOCK located at the side of the table base. Included functions on
• NORMAL and REVERSE Patient Orientation Backup Hand Control are: SLIDE HEAD/FOOT, HEIGHT UP/
• LEVEL DOWN, TREND./REV. TREND., TILT RIGHT/LEFT, BACK UP/
Touch Pads include: DOWN and FLOOR LOCK/UNLOCK.
• Menu Advancement (Forward and Backward) UNLOCK and SLIDE functions do not require foot pump
actuation. A green LED on the Backup Hand Control indicates
• Programmed positions in combination with LCD (i.e.,
the system is active.
Beach Chair)
• Floor Lock Activation
• TREND/REVERSE TREND
• HEIGHT UP/ HEIGHT DN
4
TABLE MOTION
Refer to illustration on Page 7 for the following ranges of table
CAUTION
Back-up mode motion:
Auto Limit Sensors NOT available
• Flex/Reflex: 140°/100°±1°
SLIDE HEAD SLIDE FOOT • Slide Motion: HEAD: 9" (227 mm)
FOOT: 9" (227 mm) from center
• Height Range: 22.8 to 42.5" (581 to 1080 mm)
USE WITH FOOT PUMP
• Trendelenburg Range: 30°±1°
BACK UP BACK DN
• Reverse Trendelenburg Range: 30°±1°
• Tilt Range: 20°±1°
LEG UP LEG DN
• Back Section Motion: UP: 80°±1°
DOWN: 40°±1°
TREND REVERSE
TREND • Leg Section Motion: UP: 0°
DOWN: 105°±1°
HEIGHT UP HEIGHT DN
• Kidney Elevator Mechanism: 4" (110 mm)
• Head Section (Manual): 90°±1°, 15° increments
TILT LEFT TILT RIGHT
OPTIONS
KIDNEY UP KIDNEY DN
PREVENTIVE MAINTENANCE
TABLE OPERATION
Customers are encouraged to contact STERIS concerning our
Press the desired position touch pad on the hand pendant or comprehensive preventive maintenance program. Under the
optional foot control to position/articulate the STERIS 5085 terms of this program, preventive maintenance, adjustments
General Surgical Table tabletop (refer to Operator Manual). and replacement of worn parts are provided on a scheduled
basis to help ensure optimal equipment performance and help
The following pre-operative actions must be completed before
avoid untimely or costly interruptions. STERIS maintains a
the table can be used:
global staff of well equipped, factory-trained technicians to
• Power activation: Use battery power or plug the table provide these services, as well as expert repair services. Please
power cord into both table base and facility power contact STERIS for details.
receptacle. Toggle Main Power Switch to ON for facility ac
power. NOTES
• Turn the table on: Press any button on the Hand Control
to turn table ON. 1. Approximate Table Operating Weight: 820 lbs (372 kg).
• Lock the table: Press the FLOOR LOCK button on the 2. Patient Weight Capacity:
Hand Control and then the LOCK button to order the floor
locks into the "locked" position. • 1200 lb (544 kg) load; with the ability to raise/lower but no
Auto Limit Sensor™ control device (using the Intelligent Limit tabletop articulation or slide.
Sensors) provides instant user feedback on conflicting tabletop • 1000 lb (454 kg) load; with the ability to perform all patient
articulations when the table is positioned in standard posturing but without tabletop slide.
configuration and how to resolve the conflict. • 600 lb (272 kg) load; with the ability to perform all patient
posturing and full tabletop slide.
5
3. STERIS 5085 General Surgical Table accessories have UTILITY REQUIREMENTS
specific weight claims/capacities. Accessories may limit
Power Source:
table patient weight capacity.
Battery/Electric-Powered Table
4. A patient grounding post/potential equalization terminal
Line Power Input:
(male connector, DIN 42801) is provided with the table. The
100/120/220/230-240 V ac (Jumper Selectable), 1 Ø, 50/60 Hz,
female connector for patient grounding is not furnished by 4.0 Amp
STERIS.
Environmental Use Conditions:
5. WARNING – EXPLOSION HAZARD: Table must not be Temperature: 50 - 104°F (10 - 40°C)
used in the presence of flammable anesthetics. Relative Humidity (RH): 20 - 80%
6. For further product information refer to Operator Manual
(413724-246) or contact STERIS corporation. CUSTOMER IS RESPONSIBLE FOR COMPLIANCE WITH
APPLICABLE LOCAL AND NATIONAL CODES AND
REGULATIONS.
6
Dimensions are inches (mm). SAE Dimensions are typical -
measurements are approximate based on drawing is not to scale.
metric dimensions.
4 (110)
42.5 (1080)
22.8 (581)
105°
9 (227)
9 (227) 90°
90°
80° 140°
40°
20°
20°
30°
100°
30°
7
Reference the following equipment drawing for installation details
Equip. Dwg. No. Equipment Drawing Title
413724-501 STERIS 5085 General Surgical Table
Dimensions are typical - Dimensions are inches (mm). SAE
drawing is not to scale. measurements are approximate
based on metric dimensions.
81 (2057)
1 (31) 1 (20) 23
21 19
3 (80)
12 (535) (472) (595)
(302)
22 20
(549) (508)
45 40
(1135) (1017)
9
(227)
9
(227)
42.5
(1080)
22.8
(581)
WARNING – EXPLOSION HAZARD: Table must not be used in the presence of flammable anesthetics.
Global Headquarters
STERIS Corporation
5960 Heisley Road
Mentor, OH 44060-1834 • USA
440-354-2600 • 800-548-4873
www.steris.com
This document is intended for the exclusive use of STERIS Customers, including
architects or designers. Reproduction in whole or in part by any party other than
SD901 ©2010, STERIS Corporation. All rights reserved. (12/01/10) a Customer is prohibited.