Professional Documents
Culture Documents
PSS 21H-4E1 B4
ANNUNCIATOR/NUMERIC
KEYBOARD
6x8
ANNUNCIATOR
PANEL
ANNUNCIATOR KEYBOARD
The Annunciator and Annunciator/Numeric The overlay of the keyboards have a raised
Keyboards provide output information through the use embossed circle on each key, and positive tactile/
of annunciator lights and audible alarms, plus input audible feedback to assure proper switch closure.
information through key switches. Both keyboards are
suitable for use with all I/A Series workstation ANNUNCIATOR KEYBOARD/PANEL
processors.The keyboards may be free standing or The Annunciator Keyboard is an array of 48
workstation/panel mounted. LED/switch pairs arranged in a 12 column by four row
The audio alarms feature multiple pitches which matrix. It also contains a horn silence switch and a
indicate audible differentiation of system alarms and lamp-test switch. Each LED, under control of the
process alarm priorities. An external audio output jack workstation processor’s software, may be ON, OFF,
is available for an attachable, customer supplied, or FLASHING as determined by the process
audio amplifier with speakers. The external speakers conditions. These LEDs, when used in conjunction
provide sufficient capacity to be heard if the keyboard with the unit’s audible annunciator, form an effective
is located in a noisy environment. The keyboards means of calling a user’s attention to specific areas of
have a lamp test function (LED test) which the system. The switch associated with each LED
simultaneously illuminates all the LEDs. may be used to invoke any pre-configured displays or
operator responses.
Product Specifications
PSS 21H-4E1 B4
Page 2
The annunciator panel shares all the same attributes ANNUNCIATOR/NUMERIC KEYBOARD
as the keyboard, except the arrangement of the The Annunciator/Numeric Keyboard is a combination
LED/Switch pairs. They are in a matrix of 6x8. of 32 LED/switch pairs, a 16 section numeric keypad
The annunciator keyboard provides a pocket for each and one NUM LOCK LED. The keypad section is
column of four switches. The columns accept a suitable for entering numeric data into the system.
polyester label used to print the LED/switch names. The 32 LED/switch pairs are arranged in an eight
Each annunciator switch location has two LEDs; red column by four row matrix similar to the annunciator
and yellow. The color for each switch position may be keyboard, and also provides for the insertion of eight
chosen by removing one of the two “knockouts” per polyester labels.
switch location from the polyester annotation legend.
FUNCTIONAL SPECIFICATIONS
Power Requirements Low and Medium Input
27.5 V dc, +/- 5% at the input connector 0.90 V p-p
ENVIRONMENTAL SPECIFICATIONS
The Annunciator Keyboard/Panel and Annunciator/Numeric keyboards are designed for a temperature range
and a control room environment where the temperature is controlled and the relative humidity is indirectly
controlled.
PHYSICAL SPECIFICATIONS
Mass Construction
2.72 kg (6.0 lb) Layered flat mylar (Keyboard)
Cold-rolled steel (Base)
Polyurethane (Foot Pads)
PSS 21H-4E1 B4
Page 3
DIMENSIONS—NOMINAL
KEYPAD SURFACE
mm
in
152
6.0
55.6
2.19
524 152
20.64 6.0
TOP VIEW SIDE VIEW
KEYBOARD
KEYPAD SURFACE
290.6
11.44
68.1 287.2
2.68 10.52
SIDE VIEW TOP VIEW
PANEL
PSS 21H-4E1 B4
Page 4
Foxboro and I/A Series are registered trademarks of The Foxboro Company.
An Invensys company