Professional Documents
Culture Documents
High Speed Multipole Cat 6A Connectors
High Speed Multipole Cat 6A Connectors
CAT 6A
CONNECTORS
Cat 6A connector
The high speed connectors complete the line configuration can be used in the LEMO B, K,
of 2B series connector. These new contact W or T series and are suitable for Category 6A.
Specifications: Applications:
– Transmission performance: meets Category – Industry, food processing, industrial
6A specification up to 500 MHz for 10 automation
GigaBit Ethernet transmission according – Technical equipment in buildings
IEEE 802.3an & 2.5 Gigabit and 5 Gigabit – Broadcast networks
Ethernet over Cat-5/Cat-6 twisted pair – Data communication
according to IEEE 802.3bz
– Push-Pull connector These products are specifically designed to
– IP50 or IP68 solution work in harsh environments of temperature
– For cable diameter from 3.2 to 9.9 mm extremes, humidity, and vibration
– Designed for AWG 22, AWG 24 and AWG
26* (* recommended cable length 60 m)
B series models
FGG.2B.514 Straight plug, key (G) or keys
(A…F), cable collet
50
38
ø 15
S 12 S 13
37
ø 15
S 12 S 13
S 17 1.8
Part Number Example:
ENG.2B.514.CYM
M15x1
ø 19.2
ø 18
ø 20
ø 20
S 15 4.3 maxi
EXG.2B.514 Elbow (90°) socket for printed
circuit with two nuts, key (G)
or keys (A…F)
(back panel mounting)
18
34.1
S 17 3.5
M15x1
ø 19.2
ø 20
18
9.4
ø 0.7 ø 0.7
3.2
6.5 maxi
Note: the housing is made of PPS
47
ø 16.5
S 12 S 13
~47
S 17 1.8
M15x1
ø 19.2
ø 18
S 17 3.5
M15x1
ø 19.2
ø 20
~52
~36
ø 16
S 12
ø 25
9 maxi S 18.5
ø 25
6.5 maxi
ø 25
6.5 maxi
PHG.2K.514 Free socket, key (G) or keys
(A…F), cable collet
~54
S 12 ø 19
~54
S 24 5
M20x1
ø 27
ø 25
S 12 9 maxi S 18.5
7.5
S 18.5 3.5
M20x1
ø 25
ø 25
S 12 4 maxi
Insert configuration and electrical characteristics
Male crimp contacts Female crimp contacts
Contact-shell
Reference
ø A (mm)
Crimp
1 1
2 8 8 2
7 7
514 8 0.7 l 1.6 1.5 10
3 3
4 6 6 4
5 5
Note: CAT 6A insulators can be built into the 2B, 2K (IP68) and 2T (IP68) series.
øA
GMA.2B.050.DG 5.0 36 5.5 5.0
GMA.2B.060.DG 6.0 36 6.5 6.0
GMA.2B.070.DG 7.0 36 7.7 7.0
GMA.2B.080.DG 7.8 36 8.8 7.8
Note: Note: The last letter «G» of the part number indicates the colour grey of the
Material: Polyurethane elastomer bend relief. For others colour, refer to the above table and replace letter «G»
Temperature range in dry atmosphere: -40°C +80°C by the letter of the colour required.
+ 0.1
ø 15.1 0
ø 20.2 0
+ 0.1 + 0.1
13.6 0 18.6 0
EXG.2B
ø 0.8
40°
7
1.
ø 6.8
ø 0.8
12.7
6.35
2.54
12.7
T Crimp
(mm)
Type
L S T
S 514 0.7 14 7 4
Note: all dimensions are in millimetres. Mounting nut torque: 6.0 Nm.
t6
-20 Ca
t5
Ca
LEMO
A
t6
Ca
-30
cat6A_RL_limit
dB(TRL_S(1,1))
dB(RL_S(7,7))
dB(RL_S(5,5))
dB(RL_S(3,3))
cat5_RL_limit
cat6_RL_limit
-40
-50
-60
-70
1E6 1E7 1E8 5E8
Frequency (Hz)
dB
Power Sum Next (PSNEXT)
-30
A
t6
Ca
-40
t6
LEMO
Ca
-50
Cat6A–ps_NEXT_limit
Cat5–ps_NEXT_limit
Cat6–ps_NEXT_limit
PS_NEXT_4_mit
PS_NEXT_3_mit
PS_NEXT_2_mit
PS_NEXT_1_mit
t5
Ca
-60
-70
-80
-90
1E6 1E7 1E8 5E8
Frequency (Hz)
Transfer Impedance
Impedance (mOhm) 10.0 kHz - 100.0 MHz (length: 0.40m)
1000
500
200
6
/ Cat
Cat 5
100
Cat 7
LEMO connector
50
20
10
5.0
2.0
1.00
0.010 0.02 0.05 0.10 0.2 0.5 1.0 2 5 10 20 50 100
Frequency f(MHz)
LEMO HEADQUARTERS
SWITZERLAND
LEMO SA
Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens
Tel. (+41 21) 695 16 00 - Fax (+41 21) 695 16 02 - e-mail: info@lemo.com
www.lemo.com
CAT.6A.LEN.P0115 © LEMO / Data subject to change, printed in Switzerland, January 2015
Updated May 2020