Professional Documents
Culture Documents
User Guide
用户手册
Contents
1 About This Document ..................................................................................................................................... 1
Overview of Contents ...................................................................................................................................................... 1
Special Fonts and Symbols .......................................................................................................................................... 1
How to Use This Document ......................................................................................................................................... 1
2 Starting the IPC Tool ....................................................................................................................................... 2
3 Connecting the Cameras to IPC Tool ........................................................................................................ 5
4 Configuring the Cameras .............................................................................................................................. 6
Setting .................................................................................................................................................................................... 7
Connection Status ................................................................................................................................................... 7
Camera Models ......................................................................................................................................................... 7
MAC ................................................................................................................................................................................. 7
IP ....................................................................................................................................................................................... 7
Device Information .................................................................................................................................................. 8
Video ............................................................................................................................................................................... 8
Network ......................................................................................................................................................................... 9
Upgrade.......................................................................................................................................................................10
Batch Setting ....................................................................................................................................................................11
Network .......................................................................................................................................................................12
NTP ................................................................................................................................................................................12
Video Format.............................................................................................................................................................13
Upgrade.......................................................................................................................................................................13
i
Honeywell
目录
1 前言 ..................................................................................................................................................................... 14
章节概述 ...............................................................................................................................................................................14
特殊字体与符号 .................................................................................................................................................................14
使用说明 ...............................................................................................................................................................................15
3 连接摄像机 ........................................................................................................................................................ 19
4 配置 ..................................................................................................................................................................... 20
设置 ........................................................................................................................................................................................21
连接状态 .......................................................................................................................................................................21
摄像机型号 ..................................................................................................................................................................21
MAC 地址 ....................................................................................................................................................................21
IP .....................................................................................................................................................................................21
设备信息 .......................................................................................................................................................................22
视频 ................................................................................................................................................................................22
网络设置 .......................................................................................................................................................................23
升级 ................................................................................................................................................................................23
批量设置 ...............................................................................................................................................................................24
网络设置 .......................................................................................................................................................................24
NTP ................................................................................................................................................................................25
视频制式 .......................................................................................................................................................................25
升级 ................................................................................................................................................................................26
ii
Honeywell
This document describes how to use IPC Tool. IPC Tool provides a way for users to configure or update the
cameras.
Overview of Contents
This user guide includes:
• Chapter 1, About This Document, which is a brief introduction of this user guide.
• Chapter 2, Starting the IPC Tool, which introduces how to successfully start IPC Tool when your
windows system is protected by a firewall.
• Chapter 3, Connecting the Cameras to IPC Tool, which describes how to connect the cameras to the
IPC Tool.
• Chapter 4, Configuring the Cameras, which is divided into Settings and Batch Settings parts to
describe how to configure a camera or conduct batch settings to a few cameras.
Indicates referenced chapter, figure number, page number, etc. In the electronic
Italic
version, click on italicized text to switch to the corresponding page.
Alerts or notes the user to the presence of important operating and maintenance
(servicing) instruction in the literature accompanying the product.
Insert the CD that came with your camera into your computer's disk drive, and follow the on-screen
instructions. Double-click the IPC Tool icon to start the IPC Tool.
If the Windows Security Alert appears, select the check boxes for all three types of networks, and then click
Allow access. Then, click Refresh to refresh the IPC Tool.
Figure 2-1 Windows Security Alert
If the Windows Security Alert is not shown and the IPC Tool cannot be started, add the program to the
firewall exception list:
1. Go to Control Panel System and Security Windows Firewall Allowed programs, and click Allow
another program…
Figure 2-2 Firewall
2
Honeywell
2. In the Add a Program window, click Browse:
Figure 2-3 Add a Program
4. In the Add a Program window, select IPCTool.exe in the Programs list, and then click Add.
Figure 2-5 Adding IPC Tool
3
Starting the IPC Tool
5. In the Allowed programs and features list, select IPCTool.exe, select the check boxes for Domain,
Home/Work, and Public, and then click OK.
Figure 2-6 Allow programs to communicate through Windows Firewall
4
Honeywell
To connect cameras to the IPC Tool, open the IPC Tool, input the username and password of the camera
that you want to connect to, and then click Connect. Do this for each camera that you want to connect. The
default username is admin and the default password is 1234.
You can distinguish the newly added cameras by their live videos (click ).
Figure 3-1 Connecting to the Cameras
5
Configuring the Cameras
The following figure shows the basic layout of the IPC Tool.
Figure 4-1 IPC Tool Layout
You can configure a single camera or multiple cameras at the same time. To configure a single camera,
click Setting. To configure multiple cameras, click Batch Setting.
6
Honeywell
Setting
Click Setting to check or configure the following options of a selected camera: Connection Status, Camera
Models, Mac Address, IP Address, Device Information, Video, Network, Upgrade (see Figure 4-1).
Connection Status
You can filter the cameras according to their connection status. Click the drop-down list to choose a
connection status:
Figure 4-2 Connection Status Option
Camera Models
You can filter the cameras according to models of the camera. Click the drop-down list to choose a camera
model:
Figure 4-3 Camera Models
MAC
This column displays the MAC address of each camera.
IP
This column displays the IP address of each camera.
7
Configuring the Cameras
Device Information
Click Device Information to view or edit the device information of the selected camera.
Figure 4-4 Device Information
Device Name - You can edit the name of the selected camera.
Version - The system version of the selected camera.
Video Format - The format of the selected camera (NTSC or PAL).
If the format of the selected camera is not available, its video format will not be
shown on this page.
More Details - Click Web Page to go to the detailed configuration website of the selected camera.
If the web browser version is IE8, IE9 or IE 10, select Use TLS1.2 in Internet Options. Otherwise, the web
page may not be displayed:
Video
Click Video to display the first stream live video of the selected camera.
Figure 4-5 Video
8
Honeywell
Network
Click Network to configure the network settings for the selected camera.
Obtain DNS server address automatically option will not be available if the
selected camera is in a different subnet.
DHCP - To obtain the IP address automatically, select DHCP check box. Otherwise, manually enter the IP
address.
Obtain DNS Server Address Automatically - To obtain the preferred DNS server address automatically,
select the Obtain DNS server address automatically check box. Otherwise, manually enter the DNS server
address.
9
Configuring the Cameras
Upgrade
Click Upgrade to upgrade the firmware of the selected camera..
Figure 4-7 Upgrade
10
Honeywell
Batch Setting
Click Batch Setting to check or configure the following options of a few selected cameras: Connection
Status, Camera Models, Mac Address, IP Address, Camera Version, Camera Format, Network, NTP, Video
Format and Upgrade.
Figure 4-8 IPC Tool Home Page - Batch Setting
For details about the connection status and camera models, refer to Connection Status and Camera
Models on page 7.
11
Configuring the Cameras
Network
Click Network to configure the network settings for the selected cameras.
Figure 4-9 Network - Batch Setting
NTP
Click NTP to set the time for the selected connected cameras:
Figure 4-10 NTP - Batch Setting
Time Zone - Select the time zone for the selected cameras.
Daylight Saving - Select to enable Daylight Saving mode.
DHCP - Select to get the NTP server address through DHCP.
12
Honeywell
NTP Server - Manually enter the NTP server address or domain to synchronize the time.
Click Apply to apply this setting.
Video Format
Click Video Format to set the format of the selected connected cameras (NTSC or PAL). Click Apply to
apply this setting.
Figure 4-11 Video Format - Batch Setting
Upgrade
Click Upgrade to upgrade the firmware of the selected connected cameras.
The cameras of a certain module are displayed from oldest to newest firmware
version.
13
前言
1 前言
章节概述
本手册包括以下章节:
第一章:前言
第三章:连接摄像机
第四章:配置
分为“设置”及“批量设置”,分别介绍如何设置单个摄像机或批量设置摄像机。
特殊字体与符号
手册中可能出现特殊字体、符号和图标,参考下表说明:
表示参考的章节标题、图编号、页数等,电子版手册中可直接点击,跳转到相应的章节
Italic
或图片。
【】 表示可点击的按钮或标签页名称。
必须遵守或注意的信息,避免对系统的硬件或软件组成部分造成损坏。
14
Honeywell
使用说明
• 产品以实物为准,手册中的图片仅供参考。
• 产品实时更新,如有升级恕不另行通知。
• 在使用产品之前,请仔细阅读这本手册,并妥善保存以备后用。
• 本手册已经审阅并保证其准确性,产品说明中有疑问或争议的,以霍尼韦尔公司最终解释为准。对于用户在
使用过程中对手册内容的误解、误操作而导致的任何后果,霍尼韦尔公司恕不承担责任。
15
启用 IPC Tool
2 启用 IPC Tool
图 2-2 防火墙
16
Honeywell
2. 在弹出的窗口点击【浏览】,如下所示:
图 2-3 添加程序
4. 在应用列表中选择“IPC Tool.exe”后,点击【添加】,如下图所示:
17
启用 IPC Tool
18
Honeywell
3 连接摄像机
输入其他摄像机用户名和密码继续连接其他相应摄像机。
用户可通过摄像机的实时视频分辨摄像机(点击 )。
图 3-1 连接摄像机
19
配置
4 配置
用户可点击【设置】对单个摄像机进行设置,或点击【批量设置】对多个摄像机进行批量设置。
20
Honeywell
设置
连接状态
用户可以通过“连接状态”筛选出所需摄像机。 点击连接状态下拉框显示连接状态选项,如下图所示:
图 4-2 连接状态选项
表 4-1 连接状态及描述
图标 状态 描述
N/A 全部 所有搜索到的摄像机
摄像机型号
用户可以通过“摄像机型号”筛选出所需摄像机。点击下拉框显示摄像机型号列表,如下图所示:
图 4-3 摄像机型号
MAC 地址
显示每个摄像机所对应的 MAC 地址。
IP
显示每个摄像机所对应的 IP 地址。
21
配置
设备信息
点击【设备信息】查看或编辑所选摄像机的设备信息。
图 4-4 设备信息
设备名 -可编辑所选摄像机名称。
版本 -所选摄像机的版本信息。
若无法获得摄像机视频制式,则此项为空。
更多细节 - 点击【网页浏览】查看或设置所选摄像机更多配置信息。
1. 点击 IE 浏览器右上角 。
2. 点击【Internet 选项】【高级】。
4. 重新进入【网页浏览】,并点击“继续浏览此网页(不建议)”。
视频
点击【视频】显示所选摄像机第一路实时视频。
图 4-5 视频
22
Honeywell
网络设置
点击【网络设置】为所选摄像机设置网络选项。
图 4-6 网络设置
点击【应用】应用此网络设置。
升级
点击【升级】将所选摄像机升级到目标版本。
图 4-7 升级
当前版本 - 所选摄像机当前版本。
目标文件 -点击【浏览】查找所需目标文件;点击【升级】将所选摄像机升级到目标版本。
23
配置
批量设置
连接状态 摄像机型号
“连接状态”及“摄像机型号”详情请分别参见第 21 页连接状态和摄像机型号章节。
摄像机排列顺序按照版本信息排列。
网络设置
点击【网络设置】来设置所选摄像机的网络信息。
24
Honeywell
按照如下步骤为摄像机分配 IP 地址:
1. 根据摄像机连接状态筛选摄像机。
2. 单击选择需要设置 IP 地址的摄像机。
4. 点击【应用】并刷新此界面。
NTP
点击【NTP】为所选摄像机设置时间,如下图所示:
时区 -为所选摄像机选择所在时区。
夏令时 – 勾选启用夏令时模式。
视频制式
点击【视频制式】设置所选摄像机的制式(NTSC 或 PAL),选择后点击【应用】。
25
配置
图 4-11 视频制式 – 批量设置
升级
点击【升级】对所选摄像机进行批量升级。
同一型号的摄像机按固件版本号排序。
图 4-12 升级 – 批量升级
按照如下步骤批量升级摄像机:
1. 筛选出需要升级的摄像机。
2. 点击【浏览】查找目标升级文件。
3. 选中升级文件后,点击【升级】。
26
Honeywell Security and Fire, Your Partner of Choice
霍尼韦尔安防与消防,您值得信赖的合作伙伴
大中华区总部:
中国上海市遵义路 100 号虹桥上海城 A 座 35 楼
邮编:200051
电话:(86)21-22196888
传真:(86)21-62370740
Honeywell
http://www.security.honeywell.com
http://www.cn.security.honeywell.com
©2016 Honeywell International Inc. All rights reserved.