Professional Documents
Culture Documents
REMOVAL
1. Disconnect the negative (-) battery terminal.
2. Remove the side pannel (A).
(Refer to the Body group - Crash pad)
3. Remove the heater control unit (A) after loosening the 4 screws.
5. Remove the BCM (A) after loosening the 2 nuts and disconnecting the connector.
1/2
Body Control Module (BCM)>Ремонтные операции
INSTALLATION
1. Connect the connector and reassemble the BCM.
2. Reassemble the center panel, heater control unit and side pannel.
2/2