Professional Documents
Culture Documents
Automotive tools
EUROPEAN
MANUFACTURER OF
HAND TOOLS
SINCE 1919
www.uniortools.si
Maintenance 3 -21
Lubrification 22-24
and filtration
Bodywork 25 -35
Wheels, steering 36 - 4 0
and hubs
Ignition and 43 - 4 4
carburation
EAN-13
EAN-code
In the catalogue
check-digit
In the catalogue, only the
designating the product last six figures
are indicated under the
designating the manufacturer, supplier EAN-code,
country of origin of the EAN-code – not of the product the first seven being
identical for all products.
2 2008
MAINTENANCE
Code EAN L
619250 192505 235 280
3
MAINTENANCE
Code EAN L
619251 192512 230 280
4 2008
MAINTENANCE
This tool is used for the removal of the quick couplers that connect fuel
lines. The tool has two forged pins in the jaws that compress the couplers
during removal or repair (the hose can then be removed). The jaw is
dimensioned and adjusted to enable safe and easy work with great
force in a limited space.
Use for:
Opel/Vauxhall, Fiat, GM, VW, Renault itd.
Code EAN L
619252 192529 206 223
5
MAINTENANCE
Code EAN L
619253 192536 190 190
6 2008
MAINTENANCE
The tool for stopping the flow of fluids is an indispensible tool when
changing various automotive parts connected with liquid-bearing hoses.
The tool’s main function is the stoppage of the flow of various fluids in soft
hoses so that a mechanic can replace a certain car part without interruptions
or worrying over a potential spillage.
The tool can be used on soft hoses in cars, trucks, farming machines as well
as various nautical vessels, however, the hose diameter may not exceed 55
mm at any time, as in that case the stoppage of the flow is not guaranteed.
Code EAN L
619254 192543 55 285 580
7
MAINTENANCE
This tool is primarily intended for cutting exhaust pipes but, due to the
design of its cutting chain and blades, it can also be used for copper pipe,
plastic pipe and various other pipes with diameters between 25 and 85 mm.
The tool is safe and easy to use due to accessories such as:
– a longer cutting chain enabling you to cut pipes with diameters
of up to 85 mm;
–larger cutting blades, enabling you to cut steel tube up to 3 mm thick,
brass tube up to 4 mm thick, PVC tube up to 5 mm thick
– a plastic-coated T–handle that decreases the amount of force necessary
to use the tool, enhances grip and prevents slipping;
2082 GRIP PLIERS FOR CUTTING EXHAUST PIPES
– a universal locking mechanism that keeps the tool in position until you
Material: jaws – special carbon steel.
Material: handles made from sheet steel. release the locking mechanism and stop cutting.
Used for cutting exhaust pipes in partial
replacements of exhaust systems.
Cutting capacity: 25–85 mm. The cutting chain is subject to wear, which is why we are offering
The plastic-coated T-handle provides better
grip for the user. it as a spare part (art. 2082.1).
Universal locking mechanism.
Very long cutting chain.
Code EAN L
619256 192567 305 200
8 2008
MAINTENANCE
Studs are screws without a surface that can be gripped, which prevents
their removal without damaging them. This tool is intended to do exactly
that – removing studs without damaging the threads. The tool works
through a system of three rollers that grip the stud at three points during
removal, removing the stud without damaging it. The three rollers have no
sharp edges, enabling removal without causing damage as they .
Despite this, the tool can work in both directions. Tightening with the tool is
2076 ROLLER-TYPE STUD EXTRACTOR not recommended though as the increased force in tightening could damage
Material: chrome vanadium the system of rollers, which are dimensioned solely for loosening.
roller system grips on to stud,
in both directions
easy extraction of studs
Usage:
1. Position roller-type stud extractor on stud
2. START turning stud extractor COUNTER CLOCK wise
Code EAN D L
3. When stud removed, simply pull down stud extractor
619238 192383 M5 21,5 60 19 3/8’’ 130
619239 192390 M6 23,5 60 21 1/2’’ 130
619240 192406 M7 23,5 60 21 1/2’’ 130 Important: Do not use roller-type stud extractor for tightening!
619241 192413 M8 23,5 60 21 1/2’’ 130
619242 192420 M 10 27,5 69 21 1/2’’ 180
619243 192437 M 12 27,5 69 21 1/2’’ 185
619244 192444 M 14 34,3 72 21 Ø16 265
619245 192451 R 1/4’’ 23,5 60 21 1/2’’ 130
619246 192468 R5/16’’ 23,5 60 21 1/2’’ 130
619247 192475 R 3/8’’ 27,5 69 21 1/2’’ 185
619248 192482 R 7/16’’ 27,5 69 21 1/2’’ 185
619249 192499 R1/2’’ 34,3 72 21 Ø16 255
9
MAINTENANCE
10 2008
MAINTENANCE
Art. Code EAN 943P1 943P2 943P3 943P4 943P5 943P6 943P7 943P8 943P9 943P10 943P11 943P12
942A1 619030 190303 2
942A2 619031 190310 943P1
942A3 619032 190327
942A4 619033 190334
942A5 619034 190341
942A6 619035 190358
942A7 619036 190365
943P2
942A8 619037 190372
942A9 619038 190389
942A10 619039 190396
942A11 619040 190402
942A12 619041 190419
942A13 619042 190426
942A14 619043 190433 943P3
942A15 619044 190440
942A16 619045 190457
942A17 619046 190464
942A18 619047 190471
942A19 619048 190488
942A20 619049 190495
942A21 619050 190501 943P4
942A22 619051 190518
942A23 619052 190525
942A24 619053 190532
944A1 619054 190549 2
944A2 619055 190556
944A3 619056 190563
944A4 619057 190570 943P5
944A5 619058 190587
944A6 619059 190594
944A7 619060 190600
944A8 619061 190617
944A9 619062 190624
944A10 619063 190631 943P6
944A11 619064 190648
944A12 619065 190655
944A13 619066 190662
944A14 619067 190679
944A15 619068 190686
943P7
944A16 619069 190693
944A17 619070 190709
944A18 619071 190716
944A19 619072 190723
944A20 619073 190730
944A21 619074 190747
943P8
944A22 619075 190754
944A23 619076 190761
944A24 619077 190778
944A25 619078 190785 2 2
944A26 619079 190792 2 2
944A27 619080 190808 2 2
943P9
944A28 619081 190815 2 2
944A29 619082 190822 2
944A30 619083 190839 2 943P10
944A31 619084 190846
944A32 619085 190853 2
944A33 619086 190860 2 943P11
944A34 619149 191492
944A35 619484 194844 943P12
11
MAINTENANCE
943P1 TOOL CHEST BIG - 7 DRAWERS 943P2 TOOL CHEST BIG - 8 DRAWERS
locking system locking system
drawers with ball-bearing slides drawers with ball-bearing slides
the syntetic covering protect drawers and tools from damage the syntetic covering protect drawers and tools from damage
ecological lacquered with cadmium and lead free colour ecological lacquered with cadmium and lead free colour
7 drawers (five dimensions 585x615x75mm, 8 drawers (seven dimensions 585x615x75mm,
two dimensions 585x615x155mm) one dimension 585x615x155mm)
capacity of small drawers: 30kg capacity of small drawers: 30kg
capacity of large drawers: 42kg capacity of large drawers: 42kg
possible use of SOS tool tray system in drawers possible use of SOS tool tray system in drawers
943P3 TOOL CHEST SMALL - 7 DRAWERS 943P4 TOOL CHEST SMALL - 8 DRAWERS
locking system locking system
drawers with ball-bearing slides drawers with ball-bearing slides
the syntetic covering protect drawers and tools from damage the syntetic covering protect drawers and tools from damage
ecological lacquered with cadmium and lead free colour ecological lacquered with cadmium and lead free colour
7 drawers (five dimensions 415x615x75mm, 8 drawers (seven dimensions 415x615x75mm,
two dimensions 415x615x155mm) one dimension 415x615x155mm)
capacity of small drawers: 30kg capacity of small drawers: 30kg
capacity of large drawers: 42kg capacity of large drawers: 42kg
possible use of SOS tool tray system in drawers possible use of SOS tool tray system in drawers
12 2008
MAINTENANCE
943P5 TOOL CHEST - 2 DRAWERS AND DOOR 943P6 TOOL CHEST - 4 DRAWERS
locking system locking system
drawers with ball-bearing slides drawers with ball-bearing slides
the syntetic covering protect drawers and tools from damage the syntetic covering protect drawers and tools from damage
ecological lacquered with cadmium and lead free colour ecological lacquered with cadmium and lead free colour
2 drawers dimensions 415x615x75mm 4 drawers dimensions 415x615x75mm
with door capacity of small drawers: 30kg
capacity of small drawers: 30kg possible use of SOS tool tray system in drawers
possible use of SOS tool tray system in drawers
943P7 CABINET FOR MODULAR WORK BENCH 943P8 SUPPORT FOR MODULAR WORK BENCH
locking system ecological lacquered with cadmium and lead free colour
ecological lacquered with cadmium and lead free colour
with door
13
MAINTENANCE
943P11 LONG CONNECTOR FOR MODULAR WORK BENCH 943P12 SHORT CONNECTOR FOR MODULAR WORK BENCH
ecological lacquered with cadmium and ecological lacquered with cadmium and
lead free colour lead free colour
14 2008
MAINTENANCE
These tool trays of polyethylene foam are used for clearer SOS System
and better organised tool storage in tool boxes, tool cases, S- Safety
the drawers of tool carriages and tool cabinets. O - Order 964/2 SOS SET OF COMBINATIONS WRENCHES IN SOS TOOL TRAY
This storage is known as the SOS SYSTEM. S - Survey
System Code EAN Set
These tool trays can be used in a wide range of
temperatures, do not absorb dampness and, Material: 619429 194295 8-24 12 1460
Low density polyethilene foam
with normal use, have a long lifespan. Operating temperature range:
They protect the tools by holding them in their own -70°C till +95°C
specifically designed place, thus preventing them from
moving uncontrollably around in the storage area. As the
positions in the tray are precisely defined and designed
for each specific tool, it is also easy to establish which
tools are missing.
6x7+8x9+10x11+12x13+ 8+9+10+12+13+
14x15+16x17+18x19+ 120/1 14+17+19+20+
110/1 21+22+24
20x22+21x23+24x26+
25x28+27x32
982/2A 190 x 370 x 30
982/1 190 x 370 x 30
15
MAINTENANCE
188.3 120
188.4 150
964/4 SOS SET OF OFFSET RING WRENCHES IN SOS TOOL TRAY 188.5 50
188.8 150
187 HX 3+4+5+6+7
TX8+10+
187 TX 15+20+25+
27+30+40
0.8x4.0+
187 SL 1.0x5,5+
1.2x7.0
187 PH PH1+2+3
Art. Dim.
E4+5+
21x23 + 24x26+ 25x28 + 189 6+7+8+
180/1 27x32 9+10+11
982/4 190 x 370 x 30
982/5 190 x 370 x 30
964/6 SOS SET OF BI PLIERS IN SOS TOOL TRAY 964/7 SOS SET OF BI AND GRIP PLIERS IN SOS TOOL TRAY
406 BI 180
445 BI 240
508 BI 170
430 250
461 BI 160
982/7 190 x 370 x 30
982/6 190 x 370 x 30
16 2008
MAINTENANCE
964/8 SOS SET OF LOCK RING PLIERS IN SOS TOOL TRAY 964/10 SOS SET OF HAMMER AND PUNCHES IN SOS TOOL TRAY
Art. Dim.
Art. Dim.
0.5x3.0x80,
0.8x4.0x100,
605 TBI 1.0x5.5x125, 193 HXS 3, 4, 5, 6, 8, 10
1.2x6.5x150
615 TBI PH0, PH1, PH2 982/13 190 x 370 x 30
17
MAINTENANCE
Art. Dim.
613 VDE PH1x80,
TBI PH2x100
1.0x5.5x125,
603 VDE 0.4x2.5x75,
TBI
0.6x3.5x100
Art. Dim.
461 VDE 160
BI 10, 11, 12, 13,
14, 15, 16, 17,
190 18, 19, 20, 21,
478 VDE 22, 23, 24, 27,
BI 160 30, 32
190.1A BI 260
406 VDE 180
BI 190.2 BI 380
190.5 125
190.6 75
192 HX 5, 6, 8, 10, 12
18 2008
MAINTENANCE
Art. Dim.
6, 7, 8, 9, 10,
11, 12, 13, 14,
238 15, 16, 17, 18,
19, 20, 21, 22
Art. Dim. 238.3 165
10, 11, 12, 13,
14, 15, 16, 17, 238.4 250
190 18, 19, 20, 21,
22, 23, 24, 27,
30, 32 238.5 125
190.6 23
TX20, TX25,
TX27, TX30,
192 TX TX40, TX45,
TX50, TX55,
TX60
192 HX 5, 6, 7, 8, 9, 10,
12, 14, 17
1.5, 2, 2.5, 3, 4,
220 5, 6, 8, 10
641 2, 3, 4, 5, 6, 8
642 4
660 150
670 150
19
MAINTENANCE
Code EAN L B A C
617778 177793 200 30 18 18 320
Dim Ø mm Ø mm Ø mm Ø mm
soft wire med. hard wire hard wire piano wire
200 6 5 4 3.2
”SHARK nippers”
3x higher cutting capacity as the traditional
cutting nippers by same hand power
75
cutting capacity (10N = 1kg)
50
25
traditional Shark
20 2008
MAINTENANCE
L2
L1
21
LUBRIFICATION AND FILTRATION
As car repair shops usually need to replace various types of oil filters, we
have developed a tool that can be used on the majority of standard ones.
When used, the tool conforms to the filter as tightening it makes it grip
the filter. The tool can be used on all filters with diameters ranging from
60 to 120 mm.
Because of the limited space during changing, the tool is sized and
adjusted to require as little space as possible. The hooks are ribbed to
make them suitable for filters without an edge to allow gripping and
which would be difficult to replace with conventional methods.
1976 ADJUSTABLE OIL-FILTER WRENCH The tool works in both directions and thus allows both the tightening
material gripping arms: carbon tool steel and loosening of oil filters, as it adjusts and utilises the effort invested
removes all type of oil filters
from 60 to 120 mm diameter optimally in both cases.
arms are ribbed, for better griping oil filter
for assembeling or dissasembeling oil filters
used with ratchet 3/8« and proper extension bar
22 2008
LUBRIFICATION AND FILTRATION
This tool comes in as many as 8 sizes, which can be used on the majority of
standard car oil filters on the market. Using it is simple as all that is needed is
to place the appropriate tool on the filter and rotate it with ease.
The tool can also be used when fitting oil filters as the design and material
have been carefully selected so that the tool can withstand the maximum force
applied to it. Because of the surface protection, the tool is highly resistant to
scratches and damage as well as to atmospheric and chemical effects.
Ribs Flat
23
LUBRIFICATION AND FILTRATION
This tool has three removable hooks that grip the gas tank cap firmly so
it does not move. As access to this cap is usually difficult when making
replacements, the tool is constructed so that it requires minimum space.
Simply place the tool on the cap and rotate in the appropriate direction.
The tool adapts to the cap itself and the cap can then be removed very
quickly. The replacement of the cap is also straightforward.
This tool ensures safe work and a long service life.
24 2008
BODYWORK
This tool for the removal of the front windscreen wiper arms has a
robust construction and enables the application of greater forces when
removing front windscreen wiper arms that have become “glued” to
the drive shaft as well as extending the service life of the tool.
They are used for removing wipers that are elevated above the surface
of the car body.
Working with this tool is straightforward and quick.
25
BODYWORK
A set of tools for the removal of glued windscreen glass with the
aid of a wire.
Using the longer tool, make an opening between the car body and the
glass, through which you run the wire that is then attached to both
tools. Using the »T« shaped tool, pull the wire between the car body
and the glass, thus separating them. The tool is made to allow fast and
safe work, while its shape ensures that the work is performed without
expending excessive energy.
Code EAN L1 L2
619272 192727 354 78 274
26 2008
BODYWORK
Code EAN L B2 B1 A
619267 192673 230 28 8,5 2,5 134
27
BODYWORK
Code EAN L B1 B2 A
612892 128924 6x8 97 10 11,3 4,6 18
612893 128931 10 x 12 112 12,7 14 5,6 29
612894 128948 14 x 18 16,5 21 6,6 57 ART. Dim.
137
612895 128955 20 x 24 174 23 27,3 8,6 150
6762.1
6762.2
6480 1.2x6.5+1.6x8.0+2.0x12.0
6483 PH 2,3
6484 PH 4
6489 5.6
6492 TX 20,25,30,40
Code EAN L
605063 050638 1/2” - 5/16” 37 60
28 2008
BODYWORK
434 A WHEEL AND RACK GRIP PLIERS 434 D WHEEL AND RACK GRIP PLIERS
jaws droped forged from special tool steel jaws droped forged from special tool steel
handles made from sheet steel handles made from sheet steel
surface finish: nickel plated surface finish: nickel plated A
screw chrome plated A screw chrome plated
L L
max max
L
max
Code EAN L A
616722 167220 220 16 50 500
L
max
Code EAN L A
616723 167237 250 16 80 640
30 2008
BODYWORK
1900 AUTO BODY REPAIR TOOL SET 1901 AUTO BODY REPAIR TOOL SET
1912 ROUND PEEN END DOLLY 1913 LIGHT DINGING SPOON - 1913
Material: carbon tool steel Material: carbon tool steel
head polished: mirror polished head polished: mirror polished
31
BODYWORK
Code EAN D1 D2 H
619210 192109 56 56 58 757
Code EAN A B H
619213 192130 171 58.5 401 1700
32 2008
BODYWORK
Code EAN A B H
619216 192161 109 59 670 Code EAN A1 B1 A2 B2 H
17
619219 192192 86 61 61 61.5 74.5 1375
Code EAN A B H
619217 192178 118 55 24 960
Code EAN A B1 B2 H
619220 192208 76 73 48 66 1375
33
BODYWORK
34 2008
BODYWORK
1932 STANDARD BUMPING HAMMER 1935 FENDER & PANEL DINGING HAMMER
Material: carbon tool steel Material: carbon tool steel
head polished: mirror polished head polished: mirror polished
handle: octagonal shape, hickory wood handle: octagonal shape, hickory wood
striking face round: 40mm, square: 38mm striking face: round 40mm and 32mm
Code EAN L D1 D2 H
619232 192345 325 40 12 138 460
35
WHEELS, STEERING AND HUBS
36 2008
WHEELS, STEERING AND HUBS
Code EAN D L L1
619148 191485 22,9 64 M8 28 84
Code EAN L
619288 192888 250 390
37
WHEELS, STEERING AND HUBS
Code EAN L1 D1 L2 D2
600785 007854 17 260 26 300 12 720
600786 007861 19 280 28,5 300 12 806
Art. Dim. 600787 007878 22 32 300 12 850
300
231P 17,19,21 600788 007885 24 315 33,5 400 14 1300
600789 007892 27 355 38,5 400 20 2250
600790 007908 30 425 42,5 400 20 2560
600791 007915 32 430 48 400 20 2780
609815 098159 33 430 48 400 20 2780
Code EAN D1 D2 L T
616762 167626 15 30 80 14 175 Code EAN L1 L2
24
616763 167633 17 27 30 85 14 218 600782 007823 17 255 27 399
616764 167640 19 29 30 85 15 214 600783 007830 19 285 29,5 551
616765 167657 21 31 30 85 17 239
231P L 1/2” IMPACT SOCKETS FOR ALLOY WHEELS 213 FOUR WAY RIM WRENCHES
Material: chrom molybdenum Material: chrome vanadium
black finish D1 D2 forged and oil hardened
with plastic protection lacquered
L
T L
L
Code EAN D1 D2 L T
619015 17 27 25 130 24 268
619016 19 29 30 130 24 344 DIN 3319, ISO 6788
619017 21 31 30 130 24 383
Code EAN L
600810 008103 17 19 11/16” 1/2” 370 1245
600811 008110 17 19 22 1/2” 370 1268
600809 008097 17 19 21 23 370 1306
600812 008127 17 19 22 24 370 1311
600813 008134 24 27 30 3/4” 700 3874
600814 008141 24 27 30 32 700 3900
38 2008
WHEELS, STEERING AND HUBS
Code EAN L A ΦD
601554 015545 330 53 25 405
39
WHEELS, STEERING AND HUBS
Use:
Fixed torque wrenches are mainly used in the automotive industry, namely when changing How to apply the torque:
tyres or when the preset torque is sufficient for the required torque. * Select the right torque wrench for the required level of torque.
* Apply the socket with the required size on the base.
Advantages:
Its advantage compared to adjustable and other torque wrenches is that it requires no * Apply the socket precisely on the wheel lug nut.
time-consuming setting of the torque amount because several different torque amounts have * Turn the torque wrench handle until you hear a CLICK.
already been preset. Fixed torque wrenches are colour-coded and differ in the preset torque * When you hear the CLICK, the desired torque has been reached
amounts - different colours of the plastic strip on the handle mean different torque amounts.
Due to these clear markings you will be able to find the desired wrench quickly and easily and and the lug nut is properly fastened.
save even more time. * Stop fastening.
When the desired torque is reached, the wrench emits a characteristic noise so that the user
immediately knows when to stop fastening. When released, the wrench resets itself to the
starting position and can be used again to apply the torque.
All fixed torque wrenches are in line with standards such as ISO 6789, ANSI 107.14M, U.S. Fed
GGG-W-686D, which stipulate precisely the calibration quality and accuracy, giving you a
guarantee of quality.
As this wrench features a fixed torque amount, its internal structure differs from the Unior
standard and adjustable wrenches in that it is more durable, less prone to wear and tear and
consequently requires less servicing due to incorrect use.
267A PRE-SET TORQUE WRENCHES FOR CARS 267B PRE-SET TORQUE WRENCHES FOR TRUCKS
* Material: chrome vanadium * Material: material: chrome vanadium
guaranteed to meet ISO 6789, ANSI 107.14M and guaranteed to meet ISO 6789, ANSI 107.14M and
U.S. Fed GGG-W-686D U.S. Fed GGG-W-686D
torque is preset torque is preset
easy to use and calibrate easy to use and calibrate
factory calibrated for accuracy to within +/-4% factory calibrated for accuracy to within +/-4%
40 2008
SUSPENSION AND TRANSMISION
The tool set also includes a spacer bar for conical springs, which
increases the usefulness of the Shock Absorber Remover.
Development of this tool took safety into account as the large forces
involved in removing shock absorbers may present a risk of injury
to the user.
For this reason, all grippers in the set feature enlarged grip edges to
firmly grip the spring in the tool thus preventing any possibility of
slipping, which could injure the tool user.
SUSPENSION COMPRESSOR FOR SHOCK The tool is supplied in a durable PVC case that enables easier
2051 ABSORBER SPRINGS and safer transportation.
How it works:
1. Select the appropriate cup
for your spring.
2. Place the remover on the spring.
3. START compressing the shock
absorber spring.
D
Cup 1 80 - 115 2
Cup 2 110 - 150 2
Cup 3 140 - 195 2
41
SUSPENSION AND TRANSMISION
176 DOUBLE ENDED OFFSET SOCKET WRENCHES 177 DOUBLE ENDED OFFSET SOCKET WRENCHES
Material: chrome vanadium Material: chrome vanadium
chrome plated D2 L3 chrome plated D2 L3
D1 D1
L2 95
O
T L2 95
O
T
L1 C L1 C
ISO 2236 ISO 2236
Code EAN L1 L2 C D1 T L3 D2 Code EAN L1 L2 C D1 T L3 D2
609102 091020 6 105 22 21 10 7 27 6 37 609083 090832 8 126 25 24 12 9 30 7 68
609103 091037 7 105 22 21 11 8 27 6 38 609084 090849 9 126 25 25 13 9 30 7 68
609104 091044 8 126 25 24 12 9 30 7 68 609085 090856 10 134 30 30 15 12 36 8 120
609105 091051 9 126 25 25 13 9 30 7 68 609086 090863 11 135 30 30 16 13 36 8 123
609106 091068 10 134 30 30 15 12 36 8 120 609087 090870 12 143 34 34 17 13 43,5 8 168
609107 091075 11 135 30 30 16 13 36 8 123 609088 090887 13 150 34 34 20 13 43,5 12 190
609108 091082 12 143 34 34 17 13 43,5 8 168 609089 090894 14 170 40 40 21 14 48 12 220
609109 091099 13 150 34 34 20 13 43,5 12 190 609090 090900 15 171 40 40 22 15 48 14 225
609110 091105 14 170 40 40 21 14 48 12 220 609091 090917 16 197 45 46 24 17 57 15 320
609111 091112 15 171 40 40 22 15 48 14 225 609092 090924 17 197 45 46 25,3 18 57 15 360
609112 091129 16 197 45 46 24 17 57 15 320 609093 090931 18 209 52 49 28,5 18 61 15 380
609113 091136 17 197 45 46 25,3 18 57 15 360 609094 090948 19 209 52 49 28,5 19 61 15 430
609114 091143 18 209 52 49 28,5 18 61 15 380 609095 090955 20 220 54 55 29,5 21 63,5 15 488
609115 091150 19 209 52 49 28,5 19 61 15 430 609096 090962 21 220 54 55 30 22 63,5 15 500
609116 091167 20 220 54 55 29,5 21 63,5 15 488 609097 090979 22 241 60 61 32 22 68 16 683
609117 091174 21 220 54 55 30 22 63,5 15 500 609098 090986 23 241 60 61 33 24 74 20 750
609118 091181 22 241 60 61 32 22 68 16 683 609099 090993 24 242 63 65 34,5 25 77,5 20 683
609119 091198 23 241 60 61 33 24 74 20 750
609120 091204 24 242 63 65 34,5 25 77,5 20 683
609121 091211 25 242 63 65 35 26 77,5 20 717
609122 091228 26 278 67 70 36 27 81 22 800
609123 091235 27 278 67 70 36,5 28 81 22 875
609124 091242 28 294 71 70 38,5 29 84 23 1050
609125 091259 29 300 73 85 40 30 90 24 1100
609126 091266 30 316 75 85 42 31 96,5 25 1367
609127 091273 32 305 79 85 44 32 97,5 25 1467
609128 091280 35 385 93 88 48,5 35 100 27 1560
609129 091297 36 395 94 88 49,5 36 101 27 1700
42 2008
IGNITION AND CARBURATION
186.1 290
186.2 45
186.3 75
186.4 21
Code EAN D L
600776 007762 21 27 66 125
603192 031927 19 26 63 120
603193 031934 16 22 63 90
Code EAN D B L
608111 081113 16 21 250 300 630
608112 081120 20,8 27 250 300 668
Code EAN D L B
600771 007717 16 19 145 120 160
607956 079561 19 22 115 120 150
600772 007724 21 24 115 120 160
600773 007731 21 24 180 120 240
43
IGNITION AND CARBURATION
L
Code EAN D B L
608115 081151 16 21 250 500 936
608116 081168 20,8 27 250 500 974
200 STARTER AND BLOCK WRENCHES 200 CB SET OF STARTER AND BLOCK WRENCHES IN CARTON BOX
Material: chrome vanadium
chrome plated
jaw opening DIN 475 ISO 691
hardness DIN 899 B1 B2
rust prevention DIN EN 12540 L
A1 A2
Code EAN L B1 B2 A1 A2
600671 006710 11 x 13 150 16,5 19 7 8,5 58 Code
600672 006727 13 x 17 185 24,2 8,7 10,3 104 200 CB EAN Set
19,2
600673 006734 14 x 17 185 20,5 24,2 8,7 10,3 110 600677 006772 11-22 5 615
600674 006741 15 x 16 185 21,6 23,6 8,7 10,3 106 11x13,13x17,14x17,15x16,19x22
600675 006758 15 x 17 185 21,6 24,2 8,7 10,3 106
600676 006765 19 x 22 230 27,2 31,8 10 11,5 175
44 2008