DEUTSCHE NORM
1m ano dat, Garman tanguans ong
Welded precision steel tubes
Dimensions
108 23.040.10
Descriptors: Tube, steel tube, precision tube, dimensions.
Supersedes July 1981
edition.
Geschweiste Prazisionsstahirohre mit besonderer Mafigenauigkeit; Made
keeping with curent practice in standards published by the International Organization for Standardizetion ($0), a
comma has been used throughout as the decimal marker.
Dimensions in mm
1 Scope and field of application
‘This standard specifies cimensions for welded precision
steel tubes and is to be used in conjunction with DIN 2383,
Part 2 which states the relevant technical delivery condi-
tions. The preferred sizes listed in table 2 are mainly used
in mechanical and automotive engineering.
Where stee! tubes of dimensions specified in this standard
are to comply with the technical delivery coneitions listed
in subclause 1.2 of DIN 2993 Part 2, they shall be ordered.
in quality grade Cc,
2 Dimensions
The tube diameter is subject to tha limit deviations speci-
fied in tabie 2.
Hone of the limit deviations isto be zero, this shall be stated
In the order, ¢.9. instead of (55 + 0,28) mm, either (55°%°)
mm or (55.84) mm,
Table 1: Limit deviations for the diameter
of heat treated tubes
] Umit deviations ror
>
‘Wall thickness,
T ameter
0,08 - D and above As specified in table 2,
‘Above 0,05-D
Up 10 0,025. D
41,6 times the values
in table 2
‘Above 0,025: D Twice the values in table 2.
‘The limit deviations for diameters given in table 2 allow for
covality and apply for the cold finished (hard) (BK) and cold
tinished (soft) (BKW} conditions.
For heat treated tubes, ie. cold finished and stress-relie!
annealed (GKS}, annealed (GBK) or normalized (NBK)
tubes, the limit deviations for the diameter increase a5 2
function of the wall thickness/diameter ratio (see table 1).
In the case of intermediate sizes, the deviations for the next,
largest size shall apply.
‘The limit deviations for wall thickness shall be £ 10% of the
‘nominal size and include the concentriely tolerance, which
is calculated as a percentage using the following formula:
Tae = Tain,
Tro Taig
where
is the largest wall thickness measured of a
tube section;
the smatiest wall thickness messured of a
tube section
Tubes are generally ordered in terms of outside diameter
and inside diameter.
‘Where the wall thickness is of significance, the tubes may
also be ordered in terms of outsice diamoter and wall thick
ide diameter and wal thickness. In this case, the
ions specified here refer only to two of three
possible parameters, the deviations for the third being sub-
ject to agreement. Such tubes shall be ordered in quality
grade C.
r,
3 Designation
Designation of a welded precision steel tube, made of
‘3152-3 steel, with an outside diameter, D, of 18 mm and an
inside diameter, Dy, of 13 mm (1D 13), cola finished (ard)
(x:
Tube DIN 2393 - St 52-3 BK 18x 1D 13.
Continued on pagos 2 to 6.
September 1994Page? DIN293 Pat 1
Designation of a welded precision steel tube, made of St 52-3 steel, with an outside diameter, 1, of 18mm and a wal
thickness, 7. of 2.5 mm, cold finished {hard} (®K):
Tube DIN 2393 - St §2-3 BK 18x 2,5
Designation of a welded precision stec! tube, made of St 62-3 steel, with an inside diameter, D,, of 13 mm (ID 13) and a wall
thickness, 7, of 2,6 mm, cold frished (nard) (BK):
Tube DIN 2393 ~ St §2-3 BK ID 13x 2,5
Designation of welded precision stee! tube, made of St 97.8 steel, quality grade C, with an outside diameter, D, of 25 mm
and a wall thickness, 7, of 1,5 mm, normaized (NBK), complying with the technical delivery conditions spect
Tube DIN 2393 - C- 25x 1,5- DIN 17177 - St 37.8 NBK
Table 2: Dimensions
Wall thickness, | Fee
T Os os 1 Ww Ww a 2 2 25 28
(nominal size) LL
Outside
diameter, D Inside diameter, D,
{ominal size and imi deviations)
«| £015] 242015] 2£0:5)
5 44048] 344015} 320,15)
é Sroxs| 4az008| «dss
7 6015] S4z0i5| S40%5| «ez016) 4 zoR5
3 72016] 644035] 6£0i5| S620i5| sz015 |
2 84015] 74z05| 720%5) 62015 otoa5
0 92015] S4zoi5) Bx0%5| 782015] 7£0%5| GAz015| Sto
% W085] 1042 0is| 102015] se015| 9205] GatOTG| stars
u_| sam [tas cae] 1244 008] 2x o08| rre0.6| 11095) toa t015] wox0is| 9ezo5 9Foas
% 14 + 008] 134 008] 13008] 126 t098| £015] 114x075] 172035) Ts tars] ws or]
16 1540.08) 144+ 0.08) 14+0.08| 136 +008) 134008] 1244015] 120.15) 11640,15| 1120.15]
1% 17 #008] 164 & 008] 164 006] 166 +008] 162098] 144 £008] vet008| 1962015] 192015] 1aasoi8
2 19 ace] 184+ 008] 18 + 00e| 1762008) 17 £008] 164 £008] 16008] 156205] 154016] 144 +015
z 21 £008] 204 008) 20 one] 196.4008] 192008] 184 z008| ie L008] 1762008) Wa0r8] teas ate
2 24 +008] 234 4 ons] 29+ 008] 226+ 008] 22 +008] 214% 008) 21 4008] 2084008] 203 008] 194 40,5)
2 254 003] 244008] 2¢ a8] 235 £ 008] 20% 008] 224000] 224008 218 £008] 212008] coat 0.8
2 27 +008] 264 008] 26 008] 256 + 008] 25008] 244 t008| 26008] 256 + 008) 25+ 008] 224 2 008
mo 29 £0.08) 28.4 +008] 28+ 008] 27,6 + 0,08] 27 + 0,08] 2644 008| 26008] 25.6 +008) 25+ 0,08| 244 + 0.08
# 312035) 304% are] 304095] 296036) 20206] toa e0;5| eet0%5| 276 L016] 27 EO%8] 2645 O06
# 342035] 294 ¢016] soz oss] seoaais| soz ats st4to%5] 31 F015] 30st 0%5) 302039] Ax OI5|
Sl a 37 £045] 364 £0.15] 35 40,15] 9564 0,15| 3540.15] 344 40.15] 3440.15] 336 0.15] 3340.15] 324 £0.15)
« 39075] Sea zars| Heel asses] wos] esas] ron] wesoe| waa HesH
(continued)DIN 2993 Pan 1 Pages
Dimensions in ma
T Wall
ee ee ee ee ee
(nominal one andi van] fa
7
5
thick stepped lines, the wall thickness/outside 8
7
3
72
@
oo
Poo Ee 15
*
i205 | 19405 i
14048 | W205] 12205 a
W015 | 154015} 144015] 2
194015 | 184015) 1740.15] 1620.15 cd
24015 | 194015) 1840.15] 1740,15| 26
224015 | 21£0,15| 2040.15] 19 40,16] 3B
244015 | 234015] 2240.15) 214015] 2040.15 wo
2% £0.15 | 2540.15! 242015) 234015 222 0,15) 3
2tO15 | 28+015| 27+015| 2640.15 25 + 0,15} 38
322015 | 31 £015| 304015] 294015] 28 20,15] a7 2015 a
34 £015 | 3340.19] 320,15; 3120.15] 2020.15] 29 40,15 aPage4 pIN2393 Part +
Table 2 (concluded)
Wa tekness Ty ] /
Tr os 8 1 w w a 2 22 | ots Ey
tomas 1
Outside
diameter, D Inside diameter, D,
init (nominal size and timit deviations)
40020] 396 £0.20] 39+0,20/ 364+ 020| 364020] 3762020] 37 £020] 36420201
43+ 020]
426 +020] 424 020{ 414 020)
aaia] aorin|
402020) 39420201
2020
464020] 438 + 020]
434020] 424+ 020
46+ 020] 456 +020 454 020| «44 +020)
Nominal
820 | covarons|
a
6
a
30
5
48s 020] «763 020] 74070) GAx070) 020] «54 O20] L020) HA TOR
504025] 5262025] 624025] S1azo2s] S14025| fost 025] sos cas] «at ozs
Ce] 8.025] 5753 025] s720n8| seas 026] S02 075| cosa oaal tei onal saz Om
Gj €3. 030] 626030] 62+ 0,30] 614+ 030] 614020] 6064030] 6020.0] 042020]
ma | 88 +0,0| 676% 0,0] 67 + 030] 664+ 020] 66 +030] 6564030] 652030] 644x020]
75 73x 0%6| 726 £035) 72 055| 714s Gas] 71035] Tos 035] 703 03s] Saat 3
=] Toss] ses] 773 wal Tere] Teas] azo tae] Maa
% 82% 040) 814+ 0.0] B20 808 + 0.40] 80 040] 794 £ 040)
| 87 £040] 864% 040] 85 +040] eG zoA0| eS zoAo] B1ad 040
* S045] 906 2045] wx o4s| coat 048
100 size 96 £0.45) 95,5 +045] 9540.45} 94.44 0.45
ne [10s £050] 1056 + 060] 10s + osofioaa 00
[ay 2 118 050[ nae + os0[ H5 = aso] is a50
10 125 070| 244 070
140 Bee 135 + 0,70] 1344 + 0,70
190 [som tTDIN 2a93 Pant Pages
Dimensions in ma
T ] ] Wall
3 ww] 4 jas | os | ss ts ? s 2 | ow | mickness,
| T
Outsice
(emia se and ti eatin) creas
36 +020] 362 020] a4 t020] a3 £020] we roa] zon @
3s £020 | se 020] 7 +020| 36 +020] 35 £020) a4 2020] 29020) 6
«2 =020 | 44 £020) 40+ 020] 39 +020] se e020] a7 +020] s62020 «
44020 | 422 020] «2 020] «1 £020] «ozoz0| so t020) s0az0 a
+s £025 | «es 026] 472005] «6 Foas| «6 £025| «t02s| @2025| a t0%
| s« 025 | s9025| 2025] 102s] soxoas| «a oas| vei 0as| «2028 oo
sex030 | se 030] s7 t020/ 56 +030] 58 £030] 642030] ss 0a0| F000
6030 [63 aso] 62090] 612030) 60200] sdz030| ss xoa0| 562020 70
60 +025 | so ons] 67 93s] 66 £035] 622058] 64 £035] 63 2035] 61 e0s5] Sez o35 75
4035 | 73036] 722036/ 71 203s] 70038] 602095) co 205] 6s toas| estas »
79 £040 | 78 040] 77 £040] 764 040] 752040] 74040] 734040] 71 £040] G9 LOM0 6
244040 | 09040] 2 040] €1 + 040| 80080) 792040) 7e2040] 7ex000| T4200 «
a0 +046 | 68 048] 67 £045| t6 2 048] a5 2045] 842085] sarod] 61 04s] 79L0K8 =
844048 | 93 048] 92 +046] 91 #045] 904 045] 9 t0A8| 684045] Gbz045] o1z04s| a eOR8] eOZOAS] WOO
4104 + 050 | 103 + 050102 + 050] 101 + 050 160-2080] 00 O50 98 £050] 96 £050] 9¢%050) e2cs0] so0s0) 10
114-800 |113 + 050) 112 # 980] 1113 a50|110 + 050 109. 050 }108 = 050) 106 = a0| 10« = 080] 02 z 050] oo a0] a0
| 126 + 0,70 }129 + 0.70] 122 + 0,70] 121 + 0,70) 120 + 0.70] 119 + 070 [118 + 0,70}146 + 0.70/14 +.0,70/112 + 0,70] 110 + 0,70] 130
34:8 70 [139 + 070132 + 070) 131 070) 190 a70| 29 2 0.70| 126 x 070 [126.2070] 24 x 070) 12 4070) 204070] 148
144-2080 [143+ oan] + 080141 + 080] 40x 0801094 080[ 100+ on0| 36x on0fi9¢ x 080] 92 zo@n| a0 ono] 50
tT = 9025 - D 1 T+ 008 -DPages OIN 2393 Pant
‘Standards referred to
DIN 2399 Part 2 Welded precision steel tubes; technical delivery conditions
DIN 17177 Electric pressure-welded steel tubes with elevated temperature properties:
fechnicat delivery conditions
Previous editions
IN 2993: 1998-07, 1987-11; 0IN2393-1: 1967-07. 1981-07.
Amendments
'n Comparison with the July 1981 edition, this standard has been restructured and the following amendments made:
a) The limit deviations for wall thickness have been reduced to (£0,35mm), They now include the tolerance on
concentricty,
b) The specified limit deviations only refer to two of three possible parameters, limit deviations for the third parameter
being subject to agreement (cf, clause 2)
) In table 2, tubes with a larger wall thickness o diameter ratio and tubes with wail thicknesses of 8.9 and 10 mm have
been included. Tho limit deviations of +0,08 mm for the outside diameter have bean spacitied for sizes up to 30 mmm, the.
limit deviations for the inside diameter having been reduced for smaller nominal sizes.
international Patent Classification
821 037/08
F 16. 009/02
Gor soevi0ad fw
Y a“
®
cents EE ee
Ur etoode, gisea don My
Dx 921.644.2061 2034, ‘
Pacsonaentote ait monde Magna, wobe Atma of
che Rae Bor ei 8 tN
‘en aenAoeon pseu Se Vee ON SEB heary nde. Di Rt Sch Carel 6
2. mingetende Norman
(912103 Tei?) Gren Prronstahre met buna: Mabe Tete Late
3. Mae, Beatichnung
Bata ea ig es rene trot
ELSA eamimomemmmenecare
ad ein Lae dr nin Ducmenrivekourye gent cst! Benen ozone
Fa gi et ngs = Torn aie tgs Ache 2-8 sat 5 928) err
(5°F mom f) en
Diora ae te ed erie
sasuke pone
Bete (GI omnes RE] Pon ed Ocha ne hs in
Saeeens Set
ene de eer Mate
LE isrdvs Nameietadnon 8 wee Roe nd de ease Matawccunaen beard uw!
be: 2echaten een Se la Aerie de rcpt mots
ezechnung ers ecrien raiznatrobar S52 30m Uterine Em
SrWoraities bm. Roby DIN 7303 S2OBK 18 28
ast gn ntti rennet Greg. 52: nt Bo Aan
Role OIN 7309 ~C~- §1629.8K 18x 019
Semcon moet atu sn, ie Cw 529 testa on ins
Retr OW 2003 -¢- Sx6238K0 19% 25
4 Technische Leterbedigungen
Teche Lierbeampnge ch BDU 298 7422,
ermenewsiat Rete, Ronintigen nt Retungen Fi BN Das Ie a Nog. V.] |
aamiiaiaiide
iT
apsew!
1
hae
<
‘Ss ustila SAT3ihvn