Professional Documents
Culture Documents
by pitonhh
- Hardboard 25cmx60cm.
We need cutting the wood following the annexed plains. You will have 6 pieces of wood and the backboard. The
backboard measures 60cmx25cm.
https://www.instructables.com/ORIG/F7Q/FIC6/KG54EWFU/F7QFIC6KG54EWFU.pdf
Download
https://www.instructables.com/ORIG/FUN/1VFY/KG54EWIE/FUN1VFYKG54EWIE.pdf
Download
https://www.instructables.com/ORIG/F1X/YWOQ/KG54EWIF/F1XYWOQKG54EWIF.pdf
Download
https://www.instructables.com/ORIG/FRV/4TXC/KG54EWIG/FRV4TXCKG54EWIG.pdf
Follow the picture for assemble the structure. I tight it together with nails but you can use screws and glue. I
annexed the plains of assemble to more detailed information.
Step 3: Cutting Fabric for Shoulders Pads and Low Back Pads
I used an old jean but any resistant fabric is ne for the shoulder pads. I cut 30cm of length and the jeans have
15cm of width.
For the low back pad the fabric has to be resistant because support most of all bike's weight.I cut 40cmx70cm of
fabric.
For more comfort I used sponge to ll the pads. Depending of the sponge thickness cut the necessary to ll the
pads (low back pads and shoulders pads). You don't need measures just keep in mind that you have to be able to
close the pad.
To make the backpack we need straps. I used 5cm strap to hip and 2.5cm to shoulder.
-1x20cm
-1x40cm
-2x40cm
-2x30cm
Take the ll and put it inside of the pads, then sew the fabric and the straps like in the pictures (It's not my best
work lol). Leave an opening in the hip pad.
You have all parts! just follow the pictures and get a amazing mountain bike backpack.
Goodbye everybody.