Professional Documents
Culture Documents
In this tutorial you will create this part using loft feature
3. Click Circle, sketch a circle start at origin. Click Smart Dimension, click on circle and set dimension
to 1 in.
www.solidworkstutorials.com/solidworks-loft/ 2/8
27/03/13 How to use Lofted Boss/Base
4. Exit sketch.
Set distance to 1 in apart, set # to 2 and OK. Two more plane added, click View
Orientation>Isometric
www.solidworkstutorials.com/solidworks-loft/ 3/8
27/03/13 How to use Lofted Boss/Base
7. Click Circle, sketch a circle start at origin. Click Smart Dimension, click on circle and set dimension
to 2 in.
Exit sketch.
9. Click Circle, sketch a circle start at origin. Click Smart Dimension, click on circle and set dimension
to 1 in.
www.solidworkstutorials.com/solidworks-loft/ 4/8
27/03/13 How to use Lofted Boss/Base
Exit sketch.
10. Click Features>Lofted Boss/Base click bottom circle, middle circle, top circle
and OK.
www.solidworkstutorials.com/solidworks-loft/ 5/8
27/03/13 How to use Lofted Boss/Base
Leave a Comment
Name *
E-mail *
Website
Submit
www.solidworkstutorials.com/solidworks-loft/ 6/8