Professional Documents
Culture Documents
Pdfsam Biobase Part 1
Pdfsam Biobase Part 1
Features:
1. Photoelectric sensor, automatic blowing.
2. Designed with circulation wind to ensure the cleanness of
shower area under non-shower status.
3. Double doors with electric interlock.
4. LED display with adjustable blowing time (0-99 min).
5. HEPA Filter, Class 100 cleanness.
Advantages:
Allow existence of people when working
Energy saving design
Sliding panel (wall mounted)
Work by manual, automatic and on schedule Manual
Intelligent warnings
Working Environment Temperature: -10°C~40°C RH: <90% Atmospheric Pressure: 86kPa ~ 106kPa
Power Supply AC110/220V, 50/60 Hz Applicable Room <100 (m3)
Circulating Air >800 (m3/h) Fuse F1.5AL 250V
Noise <48 dB (A) Power Input <55 (W)
03Residue <0.001 (mg/m3) Installation Wall Mounted
Package Size(W*D*H)mm 1110x400x300 Gross Weight (kg) 21
Application:
Hospital, Manufacturing Facility, Food & Beverage Factories, Public Places.
Feature:
Touch control panel and remote control (mobile, cabinet and ceiling mounted)
Work by manual, automatic and on schedule Manual
Intelligent warnings
Touch control panel and remote control (mobile, cabinet and ceiling mounted)
Work by manual, automatic and on schedule Manual
Intelligent warnings
①. 49 Sample positions.
②. 56 Reagent positions.
Model BK-200(SAPPHIRE)
Type Bench-top,Discrete,Fully automatic
Overall
Throughput
200T/H
Performance
Analysis Method
End-point, Fixed-time, Rate
Certification
CE, FDA, ISO9001, ISO14001, ISO13485
49 sample positions, including calibration, quality control
Sample Positions
and emergency
Reagent Positions 56 refrigerated reagent positions
Sample Volume 2ul ~70ul (0.1ul stepping)
Sample & Reagent
Reagent Volume R1&R2:20ul ~350ul (1ul stepping)
Unit
Sample& Having liquid level sensor function,with anti-collision
Reagent Probe function
Probe cleaning Automatic washing both interior and exterior
Reagent tray cooling Continuous 2℃~8℃ cooling within 24 hours
Reaction Time 10 minutes
Temperature Control 37℃±0.1℃, with online software monitor the temperature
Cuvettes 120 reusable reaction cuvettes (optical path length 6mm)
Reaction Unit
Mixer probe After adding reagent and sample, blending immediately
After finishtesting, washing probe wash cuvettes
Washing
automatically
Light Source 12V/30W halogen-tungsten lamp, 2000 hours
Spectroscopic methods Post light split detection technique
Optical System
Wavelength Range 340,405,450,510,546,578,630,700nm
Linear Range 0.000~3.000Abs
Calibration One-point, two-point, multi-point, factor, 4P, 5P, spline
Calibration and
QC Inserting quality control at random, with reaction curve can
Quality Control
check each test items clearly
Emergency sample can be placed in the sample tray at any
Emergency Function
time
Software Software Windows7/8/10 or above,LIS system available
Having reaction curve detection and data display function in
Data Processing
the whole process
Power Supply 110/220V±10% , 50/60Hz
Others
External Size(W*D*H) 950*610*510mm
PT. KLV INSTRUMENT INTERNATIONAL
AUTHORISED DISTRIBUTOR
Jl. A.M. Sangaji No. 27A/VI Petojo Utara Jakarta Pusat
Telp. 021-82735007/8 Fax.021-82735905 Email: klv@cbn.net.id
Package Size(W*D*H) 1120*730*980mm
Gross Weight 185kg
①. 60 Sample positions.
②. 45 Reagent positions.
③. 120 Reaction cuvettes.
④. 300 Tests / Hour.
Model BK-400(CRYSTAL)
Type Discrete, fully automatic
erall
Throughput 300T/H
Performance
Analysis Method End-point, Fixed-time,Rate
Certification CE, FDA, ISO9001, ISO14001, ISO13485
60 sample positions, including calibration, quality control and
Sample Settings
emergency
Sample Volume 2ul ~70ul (0.1ul stepping)
Teflon coating probe, with liquid level sensor, with anti-
Sample unit Sample Probe
collision function
Probe cleaning Automatic washing both interior and exterior
Analysis Items Analyzing maximally 45 items at the same time
Reagent Position 45 low-temperature refrigerated reagent position
20ul ~350ul (1ul stepping), supporting reagent from different
Reagent Volume
brand
Temperature Control Continuous 2℃~8℃ cooling within 24 hours
Reagent unit
Teflon coating probe, with liquid level sensor,withanti-collision
Reagent Probe
function.
Probe cleaning Automatic washing both interior and exterior
Temperature Control 37℃±0.1℃, with online software monitor the temperature
Cuvettes 120 reusable reaction cuvettes (optical path length 6mm)
Mixer After injecting reagent and sample, blending immediately
Reaction unit Washing Automatic water cleaning and drying system
System can record the blank value and get more accurate result
System Adjustment by deducting
blank base value of each cuvette
Light Source 12V/30W halogen-tungsten lamp, 2000 hours
Receiver 8 precision photo receivers
Optical System
Wavelength Range 340, 405, 450, 510, 546, 578, 630, 700mm
Linear Range 0.000~2.500Abs
Calibration One-point, two-point, multi-point, factor
Calibration and
Inserting quality control at random, with reaction curve can
QC Quality Control
check each test items clearly
Emergency Function Emergency sample can be placed in the sample tray at any time
Software Windows 7 /8/10 or above, LIS system available
Software Having reaction curve detection and data display function in the
Data Processing
whole process
Power Supply 110/220V±10%, 50/60Hz
Others External
1020mm*830mm*1200mm
Size(W*D*H)
PT. KLV INSTRUMENT INTERNATIONAL
AUTHORISED DISTRIBUTOR
Jl. A.M. Sangaji No. 27A/VI Petojo Utara Jakarta Pusat
Telp. 021-82735007/8 Fax.021-82735905 Email: klv@cbn.net.id
Package Size(W*D*H) 1168*908*1288mm
Net/Gross Weight 130kg/185kg
①. 90 Sample positions.
②. 90 Reagent positions.
③. 120 Reaction cuvettes.
④. 550 Tests / Hour.
Model BK-500(DIAMOND)
Type Discrete, fully automatic
Overall
Throughput
550T/H
Performance
Analysis Method
End-point, Fixed-time, Rate, Two-point
Certification
CE, FDA, ISO9001, ISO14001, ISO13485
90 sample positions, including calibration, quality control and
Sample Settings
emergency
Sample Volume 2ul ~70ul (0.1ul stepping)
Sample unit Sample Probe Having liquid level induction function
Probe cleaning Automatic washing both interior and exterior
Analysis Items Analyzing maximally 45 items at the same time
Reagent Position R1:45 R2:45 total 90 refrigerated reagent positions
Reagent Volume 20ul ~350ul (1ul stepping), supporting reagent from different brand
Temperature
Continuous 2℃~8℃ cooling within 24 hours
Reagent unit Control
Reagent Probe Having liquid level sensor function
Probe cleaning Automatic washing both interior and exterior
Temperature 37℃±0.1℃, with online software monitor the temperature
Cuvettes 120 reusable reaction cuvettes (optical path length 6mm)
Mixer After injecting reagent and sample, blending immediately
Reaction unit
Washing After finish testing, washing probes and cuvettes automatically
System can record the blank value and get more accurate result by
System adjustment
deducting blank base value of each cuvette
Light Source 12V/30W halogen-tungsten lamp, 2000 hours
Receiver 8 precision photo receivers
Optical System Wavelength
340, 405, 450, 510, 546, 578, 630, 700mm
Range
Linear Range 0.000~2.500Abs
One-point, two-point, multi-point, factor turbidimetry, log4P, log5P,
Calibration and Calibration Spline
QC
Quality Control Inserting quality control at random
Emergency
Emergency sample can be placed in the same tray at any time
Function
Software Windows 7 /8/10 or above, LIS system available
Software
Reaction curve detection and data display function in the whole
Data Processing
process
Others Power Supply AC110/220V±10%, 50/60Hz
PT. KLV INSTRUMENT INTERNATIONAL
AUTHORISED DISTRIBUTOR
Jl. A.M. Sangaji No. 27A/VI Petojo Utara Jakarta Pusat
Telp. 021-82735007/8 Fax.021-82735905 Email: klv@cbn.net.id
External
1170mm*775mm*1135mm
Size(W*D*H)
Package
1358mm*968mm*1446mm
Size(W*D*H)
Gross weight 200Kg
Model BK-360
Type Vertical,Discrete,Fully automatic
Overall
Throughput 300T/H
Performance
Analysis Method End-point,kinetic,Two-point
Certification CE, FDA, ISO9001, ISO14001, ISO13485
Sample Positions 70 sample positions
Reagent Positions 70 pcs (With refrigerated function)
Sample Volume 2-30ul,0.1μl step
Reagent Volume 20-300ul,1ul step
Sample & Automatic liquid level detecting
Reagent Unit Sample& Collision protection function
Reagent Probe Probe internal/external washing
Probe deepth automatic adjustmen
Probe cleaning Automatic washing both interior and exterior
Reagent tray
Continuous 2℃~8℃ cooling within 24 hours
cooling
Reaction Time 10 minutes
Temperature
37±0.1℃,automatic heating
Reaction Unit Control
Cuvettes 90 reusable reaction cuvettes
Washing After finishtesting, washing probe wash cuvettes automatically
Light Source Halogen-tungsten lamp
Wavelength 340-700nm,8 wavelengths,(4 positions are optional)
Optical System
Absorbance range 0-4.00Abs
Linear Range 0.0001Abs
Calibration Linear/nonlinear,one point,multi-point(Max 8 points)
Calibration and
QC plot automatically depict the function condition,show the QC
QC Quality Control
results
Automatic washing cuvette when start test&finish test,Automatic
Intelligent software detect sample& reagent volume,Reaction temperature detecting
when startup
Software Automatic alarm of no reagent,no sample,wrong run,out of
Alarm linearity range etc, Automatic re-test sample in next order after no
reagent
Software Windows 7,Windows 8 or above, windows XP
Power Supply AC110/220V,±10%, 50/60Hz,1000VA
Others
Package 1030*810*1320mm
Model BK-480(RUBY)
Type Vertical,Discrete,Fully automatic
Overall
Throughput 400T/H
Performance
Analysis Method End-point,kinetic,Two-point
Certification CE, FDA, ISO9001, ISO14001, ISO13485
Sample Positions 120 sample positions
Reagent Positions 90 pcs (With refrigerated function)
Sample Volume 2-30ul,0.1μl step
Reagent Volume 20-300μl,1μl step
Sample & Automatic liquid level detecting
Reagent Unit Sample& Collision protection function
Reagent Probe Probe internal/external washing
Probe deepth automatic adjustmen
Probe cleaning Automatic washing both interior and exterior
Reagent tray
Continuous 2℃~8℃ cooling within 24 hours
cooling
Reaction Time 10 minutes
Temperature
37±0.1℃,automatic heating
Reaction Unit Control
Cuvettes 90 reusable reaction cuvettes
Washing After finishtesting, washing probe wash cuvettes automatically
Light Source Halogen-tungsten lamp
Wavelength 340-700nm,8 wavelengths,(4 positions are optional)
Optical System
Absorbance range 0-4.00Abs
Linear Range 0.0001Abs
Calibration Linear/nonlinear,one point,multi-point(Max 8 points)
Calibration and
QC plot automatically depict the function condition,show the QC
QC Quality Control
results
Automatic washing cuvette when start test&finish test,Automatic
Intelligent software detect sample& reagent volume,Reaction temperature detecting
when startup
Software Automatic alarm of no reagent,no sample,wrong run,out of
Alarm linearity range etc, Automatic re-test sample in next order after no
reagent
Software Windows 7,Windows 8 or above, windows XP
Power Supply AC110/220V,±10%, 50/60Hz,1000VA
Package
Others 1220*1340*890mm
Size(W*D*H)
Gross Weight 200kg
①. 20 incubating positions.
②. Membrane keyboard.
③. Bulid-in thermal printer.
④. Real-time graph display
Model Biobase-silver
Reading cuvette Direct reading cuvette
Incubating positions 20 incubating positions
Light source:6V, 10W long life halogen lamp
Filters: 340/405/492/510/546/578/620nm, 2 more open filter positions,
Photometric System
±2nm pass-hand
Wavelength accuracy:±2nm
Measuring range: 0-2.500 O.D.
Photometric linearity:±2% from 0 to 2.000 O.D.
Measuring System Photometric accuracy:±2% from 0 to 2.001 O.D.
Drift<0.005 O.D.
Carry over≤1&
25℃, 30℃, 37℃, RT
Incubator temperature control
Precision: ±0.1℃
Display/Keyboard Back-illuminated LCD/Membrane key
Printer Built-in thermal printer
Interface RS-232
Power Supply AC 110V 60Hz/220V 50Hz
Dimensions 34cm*38cm*18cm
Weigh 8.5Kg
Model UA-200
Wavelength 525nm-660nm
Fault Diagnosis Instrument self-test and wokk in with standard gray level detection
Widely used for textiles, metal utensils, filters, glassware, animal cage and feed, medium (liquid product
stored in open container).
1. Main body: It adopts double layer structure. The chamber corner adopts circular arc transition, with no
cleaning dead corner and anti-corrode.
2. Sealing door: double motor-driven door, compressed air technology.
304 stainless steel door, safety interlock, double door interlock.
3. Sterilizer control system:
Siemens PLC: with advanced control function, large storage and fault free operation time up to 50000
hours
Micro-computer touch screen: with Multi-function and three levels password protection.
4. Printer: It achieves real-time output by micro needle printer, could output the “pressure, temperature,
time, F0value” and other parameters and curves conveniently.
5. Temperature, pressure transmitter setting:
Dual core temperature transmitter, work on system temperature and sterilization recording.
Pressure transmitter: jacket and chamber sets separately.
6. Sterilizer pipeline system:
ASCO seat pneumatic valve
Water ring type vacuum pump
High function biology filter, Teflon filter core
BKQ- BKQ- BKQ- BKQ- BKQ- BKQ-
Model
2000D-B 2000S-B 2500D-B 2500S-B 3000D-B 3000S-B
Capacity 2000L 2500L 3000L
Chamber
1700*1000*1200 2100*1000*1200 2500*1000*1200
Size(W*D*H)mm
Chamber Material 304 stainless steel
Design Pressure 0.245MPa
Working Pressure 0~0.22MPa
Design Temp. 139 ℃
Working Temp. 105~134 ℃
Temp. Precise ≤0.5℃
Heat Uniformity ≤±1℃
0.4~0.8Mpa
Steam
70kg 80kg 100kg
0.15~0.3Mpa
Water
400kg 500kg
Compressed Air 0.5-0.8Mpa
Power Consumption 5.5KW 6.5KW
Power Supply AC380V, 50HZ
Standard Accessory Trolley, Loading cart
PT. KLV INSTRUMENT INTERNATIONAL
AUTHORISED DISTRIBUTOR
Jl. A.M. Sangaji No. 27A/VI Petojo Utara Jakarta Pusat
Telp. 021-82735007/8 Fax.021-82735905 Email: klv@cbn.net.id
External
2020*1880*2200 2420*1880*2200 2820*1880*2200
Size(W*D*H)mm
Package
2300*2100*2400 2700*2200*2350 3100*2200*2350
Size(W*D*H)mm
Net Weight(kg) 2500 2700 3000
Gross Weight(kg) 2800 3000 3300
It is used for the repaid sterilization of small instruments in stomatology, ophthalmology, E.N.T.
department, gynecology, operating room, etc.
Application:
The glass bead sterilizer is commonly used to sterilize forceps, scissors, tweezers, scalpels, needles,
inoculation loops and etc. And the small size makes it be placed on any Laminar Air Flow Work benches
or any other works tables in a clean room atmosphere.
Features:
1. The sterilization isquick, easy and accurate.
2. Once switched 'ON', the units are readyto use within 15 Minutes and ensure total sterilization by
destruction of al Micro-Organisms within10 seconds.
3. Material: stainless steel
4. The glass bead is reusable.
Model GBS-5000A GBS-5000B
Temp.range 100~300℃
Temp.Accuracy ≤±5℃
Heatingtime toMax.Temp ≤25min to reach 300℃
AmbientTemp. 5℃~40℃
Power Consumption 120W 250W
PowerSupply AC220V±10%, 50/60Hz;110V±10%, 60Hz
Chambersize Φ40*80 mm Φ40*140 mm
External size(W*D*H) 130*145*155 mm 130*145*215 mm
Weight of Glass Bead 150g 300g
Package Size(W*D*H) 420*340*260mm 420*340*270mm
G.W. 5kg 5.5kg
Autoclaves are equipment for sterilizing widely used in microbiology, medicine, podiatry, tattooing, body
piercing, veterinary science, mycology, dentistry, and prosthetics fabrication. They vary in size and
function depending on the media to be sterilized.
1. Adopting European N standard, with thermal vacuum and drying functions, it can be used for A-type
hollow instruments and solid instruments. Thermodynamic vacuum guarantees elimination of cold air
from the cavity and makes sure that reaches the optimal effect of sterilization.
2. Specially design for dental clinic field, it could sterilize 12 pieces hand piece at same time, simply and
efficiently.
3. Sliding door design for easy secure operating-for BKM-Z2.
4. Microprocessor control, LCD or LED display and modularized panel for easy operation.
5. Automatic malfunction detection system makes easy maintaining.
Model BKM-Z18N BKM-Z24N
Capacity 18L 24L
Sterilization Class Class N (according to EN 13060 standard)
Sterilization Temp. 121 ℃,134℃
Drying Procedure Heating dry
Display LED display
Testing System B&D test
Temperature: 1 ℃
Control Precision
Pressure: 0.1bar
Sterilization Data Optional Mini printer
Hand lock door
Pressure lock system
Safety System Relief valve in case of over pressure
Pressure or temperature over load protection
Alarm for system failure, finish reminding, water level warning
Water Supply System Build-in water tank, easy to clean
Water tank capacity 4L
Water Consumption 0.16L~0.18L in one cycle
Tray Holder 3 pcs SS trays on SS shelf
Medical stainless steel 304 unibody structure
Max working pressure:2.3bar
Chamber
Min working pressure: -0.9bar
Max temperature: 145 ℃
Ambient Temp. 5~40 ℃
Noise <50dB
Power Supply 110/220V±10%, 60/50Hz
PT. KLV INSTRUMENT INTERNATIONAL
AUTHORISED DISTRIBUTOR
Jl. A.M. Sangaji No. 27A/VI Petojo Utara Jakarta Pusat
Telp. 021-82735007/8 Fax.021-82735905 Email: klv@cbn.net.id
Power Consumption 1500W 1700W
Chamber Size(mm) φ245×360 φ245*470
External Size(mm) 560*450*400 670*450*400
Packing Size(mm) 660*525*495 770*525*495
Gross Weight(kg) 53 60
Model BIOBASE4000
Sample Rack 24 sample tubes/rack, at most 23 racks
Primary Sample
Tubes 11.5-13mm
Pipetting 8ul~1000ul, (10ul) CV<5%
Time To Dispense 8 minutes adding 96 samples
Dispensing System 1 aspirating-dispensing probe with X-Y-Z
Sample Pipetting movement;dilution system with a syringe of 1000ul,
Unit continuous flow washing station.
Reagent Racks 2 reagent tanks(60ml)/ rack, at most 23 racks
QC Racks 24 positions/QC rack, at most 23 racks
Pipetting 8ul~1000ul,1ul stepping
Pipetting Precision (100ul )CV≤0.5%
Reagent Pipetting 2 minutes(typical)^100ul of 96 reagents to plate from
Unit Time To Dispense reagent bottle
Programmable Yes(options & parameters)
3 wash buffers at 2.0L, 1 wash buffers at 5.0L,with
Wash Containers level-sensing
Waste Containers 25L with waste full sensor
Washing System two 8 nozzle manifolds, one to dispense and the other
one to aspirate
Washing Unit Washing Residual <2μl
Reading System 8 independent photometric channels with mono and
bichromatic reading capability
Photometric Range 0.000 ~3.000 OD
Spectral Range 400-700nm
Optical Filters 2 precision filters (450and 630nm); 2 more on request
(4 filters max, 405 nm, 450 nm, 492 nm and 630 nm)
Instrument
Dimension (L*W*H) 1100*720*700mm
Package
Dimension (L*W*H) 1380*910*980mm
Physical Total Weight 150kg
Specification
The LCD screen can display temperature, pressure, time, operating status, error and alarm information,
etc.
It is convenient for users to observe the sterilizer running status.
Multiple security protective device
Over temperature automatic protective device, multiple control and protection for steam generator, door
safety interlock protection and double chamber overpressure protection, electronic circuit safety device.
Automatic door
BKM-Z18/24/45B(III) series adopt automatic door structure, fast and simple operation, protecting
operators from scald.
BKM60/80B(III) series adopt multipoint synchronous linkage pressing technology, reliable and durable.
Efficent vacuum
PT. KLV INSTRUMENT INTERNATIONAL
AUTHORISED DISTRIBUTOR
Jl. A.M. Sangaji No. 27A/VI Petojo Utara Jakarta Pusat
Telp. 021-82735007/8 Fax.021-82735905 Email: klv@cbn.net.id
Efficient vacuum system, low working noise,vacuum lowest limit can reach over -90KPa, vacuum in high
speed, perfect drying performance, thorough sterilization.
Multiple program types
Sterilization programs: Unwrapped, wrapped, ruber,user 01, N-quick, B-quick, prion test program: BD &
Helix, Leakage test.
Auxiliary program: Preheat, drying, washing.
High-efficiency steam generator
BKM-Z18/24/45B(III) adopt build-in instant steam generator. BKM-60/80B(III) adopt build-in energy-
storing steam generator producing steam in high speed and large quantity.
Other features
Pulse vacuum, heating, sterilization, exhausting, vacuum drying totally automatic.
The chamber is heated by film heater, saving energy and time.
Loading tray
Application range:
Technical features:
1. Complete process of filling water, dynamic pulse exhaust, heating, sterilizing, draining and drying runs
automatically.
2. LED screen displays all steps of full process as well as error codes.
3. Sterilization programs for dressings, equipment, rubber, culture medium, waste, etc.
4. Adopting certain temperature (98~102 ℃) exhaust method and
completely empty the cold air inside chamber for ensuring steam saturability.
5. Automatic selecting quick or low exhaust to avoid sterilization liquid overflowing.
6. Inner stainless steel water tank for water and steam to circulate inside. Steam does not exhaust during
sterilization, so as to keep the outside clean and dry.
7. Independent quick service window, easy for repairing and maintenance.
8. Water inlet filter to keep high water quality.
9. Hand wheel type of quick-open door structure, self-expandable sealing ring, easy operating and safe.
10. Optional printer for recording sterilization data.
Application range:
Vertical Autoclave is mainly used in hospitals, laboratories, universities and other institutes where users
need to sterilize temperature-resistance solid and liquid.
Technical Features:
1. Flip-open door structure with spring booster, easy to open.
2. External material: Cold rolled steel with anti-bacteria powder coating.
3. Fixed sterilization programs for dressings, unwrapped and wrapped equipment, rubber, and liquid.
4. Door cover is wrapped completely, to prevent scald effectively.
5. Radial self-expanding silicone rubber seals with high effect and long using life.
6. LED displays inner temperature, time and error codes.
7. Automatic exhausting steam function.
8. Reliable mechanical safety interlock feature.
9. Complete protection system.
Safety Features:
1. Over pressure, safety valve can automatically open to release pressure.
2. Over temperature, the system will stop heating automatically and start alarm.
4. Anti dry-out function. If water level is too low, heating stops and error code displays on screen.
5. Over current, over voltage or electric leakage protection apparatus-air switch.
Features:
1. Pulse vacuum exhaust to ensure the effect of steam sterilization.
2. Removable probe detects the internal temperature of liquid directly, to ensure the sterilization effect of
liquid program.
3. Steam water internal circulation for 75L model.
4. LCD screen display shows pressure, temperature, time and error codes.
5. Standard built-in printer for recording the information during the entire sterilization process.
Model BKQ-B75V BKQ-B100V
Capacity 75L 100L
Chamber Size(mm) φ386×695 φ386×875
Chamber Material 304 medical stainless steel
Max Designed Pressure 0.25MPa
Max Designed Temp 124 ℃ or 137 ℃
Working Pressure 0.22MPa
Working Temp. 121 ℃ or 134 ℃
Temp. Accuracy ±0.1 ℃
Vacuum System Eject vacuum system Water circulationvacuum system
Circulation Patterns Steam water internal circulation External water circulation
Solid instruments 15kg 20kg
Load Wrapped equipment 10kg 15kg
Porous load 5kg 8kg
Power Consumption 5.5KW 5.8KW
Power Supply AC 220V, 50Hz AC 380V, 50Hz
External Size(mm) 610*700*1100 610*700*1270
Package Size(mm) 825*760*1300 825*760*1500
GrossWeight(kg) 145 170
Features:
1. Automatic sterilization process
2. Drying function
3. Over-temperature, over-pressure protection device.
4. Interlock function.
5. Safety valve for over pressure protection.
6. Water level sensor. The power will be cut-off automatically in case of low water level.
7. 304 stainless steel material chamber.
Application:
It is applicable for the sterilization of unpacked solid
instrument in department of stomatology, ophthalmology,
operation room and CSSD.
Features:
1. Sterilizing programs for fabric, instrument, rubber and liquid.
2. Equipped with printer to print date, time and process parameters.
3. Build-in efficient steam generator, microcomputer temperature control.
4. Perfect four-level authority management system to avoid mis-operation.
5. The positive pressure air-exhaust system to exhaust the cold air from chamber.
6. Post-dying function makes the residual humidity of sterilized articles less than 3%.
7. Touch screen display of temperature, pressure, time, running status and failure warning.
8. Over-heat auto protection device, dual door safety lock device, over-pressure relief valve, short-
circuit protection and over-pressure protection.
Application:
It is applicable for the sterilization of unpacked solid
instrument in department of stomatology, ophthalmology,
operation room and CSSD.
Model BKQ-B100H BKQ-B150H BKQ-B200H BKQ-B300H
Capacity 100L 135L 185L 300L
Chamber Size Φ400*850mm φ500*710mm φ500*950mm φ632*1000mm
Chamber material 304 medical stainless steel
Max working pressure 0.23Mpa
Working temp 105~136 ℃
Temp accuracy ±0.1 ℃
Power consumption 11kw 17kw
Power supply 380V, 50HZ
External size(mm) 1250*730*1660 1110*750*1742 1350*750*1742 1400*890*1780
Packaging size(mm) 1450*1000*1950 1370*890*2060 1510*890*2060 1700*1050*2090
Gross weight 310 kg 470kg 540 kg 830 kg
Application:
It can be widely used in department of stomatology
and ophthalmology, operating room and other medical
institutions. It is suitable for all wrapped or unwrapped solid
instrument, A-class cavity instrument (dental hand-pieces
and endoscopes), implantable instrument, dressing fabric
and rubber tubes, etc.
Features:
1. Built-in efficient steam generator, microcomputer temperature control.
BKQ-D/S is a fast, compact and versatile sterilizer which is researched and developed according to the
latest requirements of medical institution and CSSD. It is designed and manufactured combines high
capacity with cost-efficiency, while offering high operating reliability and easy maintenance.
Superb chamber machining and welding process
The acid-proof stainless steel chamber and jacket are automatically robot-
welded to guarantee long time and
trouble-free operation.
Power consu
Model Volume Chamber size External size Net weight Power supply
mption
BKQ-140D-
425 Kg 2.5Kw
A
1035*1700*1100mm
BKQ-
525 Kg 18Kw
140DD-A 420*420*830
146L 380V,50Hz
BKQ-140S- mm
510 Kg 2.5Kw
A
1035*1700*1200mm
BKQ-
610 Kg 18Kw
140SD-A
BKQ-240D-
580 Kg 2.5Kw
A
1286*1848*1000mm
BKQ-
660 Kg 24Kw
240DD-A
BKQ-240S-
660 Kg 2.5Kw
A
1286*1848*1100mm
BKQ-
720 Kg 24Kw
240SD-A 600*600*670
241L 380V,50Hz
BKQ-240D- mm
600 Kg 2.5Kw
B
1286*1848*1000mm
BKQ-
680 Kg 24Kw
240DD-B
BKQ-240S-
680 Kg 2.5Kw
B
1286*1848*1100mm
BKQ-
740 Kg 24Kw
240SD-B
BKQ-350D-
780 Kg 2.5Kw
A
1286*1848*1225mm
BKQ-
880 Kg 24Kw
350DD-A
600*600*980
BKQ-350S- 352L 380V,50Hz
mm 860 Kg 2.5Kw
A
1286*1848*1240mm
BKQ-
960 Kg 24Kw
350SD-A
BKQ-350D- 1286*1848*1225mm 880 Kg 2.5Kw
PT. KLV INSTRUMENT INTERNATIONAL
AUTHORISED DISTRIBUTOR
Jl. A.M. Sangaji No. 27A/VI Petojo Utara Jakarta Pusat
Telp. 021-82735007/8 Fax.021-82735905 Email: klv@cbn.net.id
B
BKQ-
1000 Kg 24Kw
350DD-B
BKQ-350S-
960 Kg 2.5Kw
B
1286*1848*1240mm
BKQ-
1080 Kg 24Kw
350SD-B
BKQ-650D-
1286*1980*1400mm 1170 Kg 4 Kw
B
BKQ-
1286*1980*1400mm 1270 Kg 46 Kw
650DD-B 610*910*1180
655L 380V,50Hz
BKQ-650S- mm
1286*1980*1420mm 1270 Kg 4 Kw
B
BKQ-
1286*1980*1420mm 1370 Kg 46 Kw
650SD-B
BKQ-810D-
1286*1980*1670mm 1260 Kg 4 Kw
B
BKQ-
1286*1980*1670mm 1360 Kg 61 Kw
810DD-B 610*910*1460
810L 380V,50Hz
BKQ-810S- mm
1286*1980*1700mm 1360 Kg 4 Kw
B
BKQ-
1286*1980*1700mm 1460 Kg 61 Kw
810SD-B
BKQ-990D-
1286*1980*2020mm 1300 Kg 4 Kw
B
BKQ-
1286*1980*2020mm 1400 Kg 61 Kw
990DD-B 610*910*1800
999L 380V,50Hz
BKQ-990S- mm
1286*1980*2040mm 1400 Kg 4 Kw
B
BKQ-
1286*1980*2040mm 1500 Kg 61 Kw
990SD-B
BKQ-
1445*1940*1755mm 1950 Kg 5 Kw
1200D-B 680*1180*150
1203 380V,50Hz
BKQ- 0mm
1445*1940*1760mm 2050 Kg 5 Kw
1200S-B
BKQ-
1445*1940*2115mm 2111 Kg 5 Kw
1500D-B 680*1180*187
1500 380V,50Hz
BKQ- 0mm
1445*1940*2130mm 2211 Kg 5 Kw
1500S-B
Range of application:
It's desk-top autoclave sterilizer which is designed for the hospital, clinic, lab, etc.
It's mostly suitable for sterilizing of surgical, dental instruments, glassware, culture medium and
biological dressing, food and goods, etc.
Features:
1. Easy operation, safe and reliable.
2. The sealing ring is made of silicon rubber.
3. Two safety valves keep double safety (for timing control type).
4. It has self-adjustment function (for timing control type)
5. It is well sealed and effectively prevents steam leakage.
6. Over temperature & over pressure auto-protection.
7. Electric heating or gas heating can be used (for Dual fuel Type).
8. The sterilizer is provided with a power switch, user can control the operation easily.
9.
Immersion type electric heating pipe, thermal efficiency is high, stainless steel material tube is durable to
use.
10. Steam-
water inner circulation system: No steam discharge and the environment for sterilizing will be clean and
dry.
11. Double groove pressure gauge, could clearly indicate, convenient observation, reliable performance.
12.
When at lower water level, or at the end of heat preservation time, have buzzer alarm, timing control type
will
automatically stop heating (for timing control type).
Product introduction:
BIOBASE Plasma sterilizer takes H2O2 assterilizing agent
and from plasmatic state of H202 by electromagnetic field
under low temperature. It combines both gaseous and
plasmatic H2O2 to make sterilization for the items in chamber
and decomposed the residual H2O2 after sterilization.It is
widely used in CSSD or other medical institute for the sterilization
of electric wire and cable, optical glasses and glass lens, power
equipment and batteries, endoscopes, catheter, nonmetallic and
other wet or heat sensitive instruments.
Application:
The sterilizer is applicable to sterilize the medical instruments that are thermo labile or nonmoisture tight.
It is not applicable to the sterilization of liquid, powder or cotton fabrics. All the medical instruments that
meet the following conditions can be processed by this type of sterilizer.
BKQ-PS100:
Medical tubular instrument: inner diameter≥1mm, length≤500mm
Nonmetal tubular instrument: inner diameter ≥1mm, length≤2000mm
BKQ-PS200:
Medical tubular instrument: inner diameter≥0.8mm, length≤300mm
Nonmetal tubular instrument: inner diameter ≥1mm, length≤1000mm
Product features:
Low temperature sterilization
The sterilization temperature is 50±5℃ which is much lower than steam sterilization. It is dry sterilization
that has
no harm on instrument, so it extends the device service life.
Safe and environment friendly
The matter after sterilization is water and oxygen molecule that have no toxic harm to staff or patient, and
there
is no need for drainage or air exhausting. High efficient H2O2 filter is installed in the exhausting outlet to
guarantee
no H2O2 pollution to the environment.
Convenient
Only power supply is needed for installation. The system adopts man-
machine control interface with intelligent
program design. Equipped with foot switch (optional) and integrated biological incubator (optional).
Multiple models
The door structure of the sterilizer is customizable (single or double door). To meet pharmaceutical factor
y needs,
chamber material can be stainless steel.
PT. KLV INSTRUMENT INTERNATIONAL
AUTHORISED DISTRIBUTOR
Jl. A.M. Sangaji No. 27A/VI Petojo Utara Jakarta Pusat
Telp. 021-82735007/8 Fax.021-82735905 Email: klv@cbn.net.id
Reliable sterilization
The chamber adopts alloy material which has good thermal conductivity to guarantee a stable temperature
in the
chamber. The purification system makes the H2O2 diffused uniformly. The low temperature storage syste
m
provides a stable concentration of H2O2.
Safe sealing door
The sterilizer adopts mandrill-
driving auto overhead door with reliable sealing function and safe lock device to
guarantee personal safety.
Data management
The 2048M storage (optional) can store original data for inquiring. Mini printer can be used to print opera
tion data
timely. There are two types of record methods to guarantee the data is 100% acquirable.
Advanced configuration
The vacuum pump, controller, pressure transmitter and other key components are world famous brand. Th
e
sterilizer equipped with multiple programs and bar code identification system (optional).
Reassuring
We provide comprehensive operation training materials to key components maintenance intelligent remin
ding
system for your convenience.
Model BKQ-PS40X BKQ-PS100X BKQ-PS100XP BKQ-PS200X BKQ-PS200XP
Volume 64L 135L 225L
Chamber size
650*380*260 750*450*400 1250*450*400
(L*W*H)mm
Power consumption 3.5Kw 3.8Kw 4.7Kw
Power supply 220V,50Hz 380V, 50Hz 380V, 50Hz
External size
850*725*750 990*760*1600 1460*760*1600
(L*W*H)mm
Package Size
1000*900*1220 1220*1080*2000 1690*1000*1960
(L*W*H)mm
Gross Weight(kg) 240 460 580
Application:
Hot air sterilizer is usedto sterilize small surgical instrument, glass, petri dishes etc.
This device is suitable for medical and veterinary clinics, hospitals, pharmacies, health care centers, and
laboratories.
Features:
1. Over-temperature alarm.
2. Adjustable sterilization time.
3. Top air outlet with adjustable air volume.
4. Heating up fast,forced-airconvection, fast sterilization.
5. Fan inside, fully sealed inside, no air circulation with external air, temperature rise fast.
6. High precision microprocessor temperature control; 304 stainless steel inner chamber.
Model HAS-T25 HAS-T50 HAS-T70 HAS-T105 HAS-T200
Capacity 25L 50L 70L 105L 200L
Temp.Range RT+10~250℃
Temp.Precision 0.1℃
Temp.Fluctuation ±0.5℃
Ambient Temp. 5~40℃
Timing Range 1~9999min
Shelves No. 2 pcs
Power Consumption 600W 900W 1150W 1600W 3000W
Power Supply 220V/110V±10%,50/60Hz
InternalSize(W*D*H) mm 300*300*270 420*350*350 400*375*500 500*350*550 600*550*600
ExternalSize(W*D*H) mm 600*470*420 710*520*520 600*550*860 840*530*730 890*730*780
Packing Size (W*D*H) mm 690*550*600 840*680*630 680*680*990 970*670*860 1020*870*910
GrossWeight(kg) 45 50 75 80 100
The lab glassware washers integrate programmed cleaning, disinfecting and drying functions to clean all
glassware stuff, for beaker, flask, pipette, petri dish, burette, measuring cylinder, test tube etc.
1. High efficient cleaning system, designed with European reliable pump, optimized spray arm and
nozzles, and self-cleaning program .
2. Rapid and efficient drying system, designed with independent air heater, HEPA filter and drying
process .
3. Water heating temperature can reach 99℃, while hot air drying temperature can reach 120℃ .
4. Professional configuration design—stainless steel for corrosion resistance;reinforced glass window
mounted to achieve a clear view on washing process .
5.PLC touch screen control with preset 6 programs(including one customized program) .
6. Safety protection—electronic security door lock to prevent unexpected door opening, water & drying
air temperature dual control and equipped with emergency switch .
Automatic medical washing disinfector provides standard and automatic cleaning and disinfection for
most of medical equipments , so as to eliminate the possibility of infection in cleaning and disinfecting .
Feature:
*Two toughened glass doors , prevent cross infection .
*Color LCD touch screen , advanced programmable control system with six standard programs .
*High efficient cleaning system , with rotary nozzles in top ,bottom and among the shelves to make sure
that the spray liquid can contact the surface of devices completely .
*High efficient drying system with HEPA filter , can clean and dry the inner of tubular things .
*Thermal disinfection , water heating system can make sure the water temperature keep above 93℃ to
reach the international disinfecting efficiency level .
2*8*0.2ml
2*8*0.2ml
Rotor No.2 PCR centrigugal tube
PCR centrigugal tube
(speed≤6000rpm)
Noise ≤45dB ≤50dB
External Size(W*D*H) 175*156*125mm
Packing size(W*D*H) 260*200*150mm
Net Weight ≤1.4kg
Gross weight 3kg
An apparatus consisting essentially of a compartment spun about a central axis to separate contained
materials of different specific gravities, or to separate colloidal particles suspended in a liquid
Model: LC-4KC
Application: scientific research institute of biology,
Max .Speed:4000rpm
chemistry, medicine,
Max .RCF:2325xg
pharmacy, food and environment protection. This model also is
angle rotor capacity: 20ml*12
good to
Time range:0~99min
separate plasma or other suspension liquid.
Packing size:35*36*34cm
Steady performance;
G.W: 10kg
Microprocessor control;
Driven by brushless motor and easy to operate;
With mechanical lock.
Speed range: starting~4000 rpm,
Capacity:8*20ml
Model: LC-T4K
Timing range:0-30min
Application: hospital, bio-chemistry lab, making determination
Max.RCF:2325×g
and analyzing to blood serum and so on.
Packing size:38*33*31cm
With safety switch
G.W: 9kg
Model BK-TLLR5K
Microprocessor control, LED display: rotor model, time, RCF and speed;
Quiet, maintenance-free brushless drive;
Double Lid and Lock system;
20 programs memory for standard runs, programmability is available;
Acc/Dec: Choice of 15 acceleration and deceleration rates;
RPM setting function, and short-spin function;
Easyly setting and reading RCF, speed synchronize in time
Automatic rotor recognition and imbalance detection, audible alarm for error and imbalance;
Easily adjust speed, RCF, time and temperature during the running without stop
The shortest Acc/Dec time is less than 30s
Pre-cooling before the rotor start and fast cooling function ;
Automatic temperature compensation, to ensure that the samples do centrifugal in a safe temperature;
Danfoss compressor kit.
Model BK-R1042J
Max. speed 5500rpm
Max. RCF 5400xg
Max. capacity 300mlx4
Speed accuracy ±10rpm
Noise ≤60dB
Timing range 1s~999min/continuous / short spin
Temp range -20℃~40℃
Temp accuracy ±1℃
Power Supply AC220V, 50Hz
Externalsize (L*W*H) 450x575x520mm
Packing size (L*W*H) 820x740x700mm
Net weight 110kg
Gross weight 145kg
DC Brushless motor, special damping device make the motor run steady, free maintenance;
Microprocessor control;
LED display: speed, RCF, time , conversion of RPM/RCF.
Special ventilation design can avoid higher temperature to protect samples. Samples temperature only rise
5℃under 4000r/min for long time running.
External cold-rolled steel with powder coating, stainless steel centrifugal chamber and lid.
It adopts the methods of pulse width modulation (PWM) to realize fast brake with second grade vibration
absorber and effectively guarantees the fast stop without suspension.
Alarm: lid open, imbalance, over speed, rotor mounting abnormally.
Function: automatically electronic lid lock, over speed, over temperature and imbalance protection,
emergency lid-lock release, inching function, short-spin function,memory flashing function.
Model BK-T4K
Max.speed 4000rpm
Speed accuracy ±30rpm
Max. RCF 2200xg
Max. capacity 12*7ml
Timing range 0~99min
Noise ≤58dB
Power supply AC220V, 50Hz
Power consumption 0.25KW
External size(W*D*H) 330*295*255mm
Packing size(W*D*H) 480*445*455mm
Net weight 28kg
Gross weight 36kg