Professional Documents
Culture Documents
Plot Scales For The Paper Space Zoom XP in Autocad and Intellicad
Plot Scales For The Paper Space Zoom XP in Autocad and Intellicad
Plot Scales for the Paper Space Zoom XP in AutoCAD and IntelliCAD
I have added here the rule of thumb for choosing the right plot scale for Plot Drawing units
a drawing in AutoCAD or IntelliCAD. scale mm cm m
N.B. The Paper Space should be set for a plot scale 1:1 or 1 mm = 1
10:1 10xp 100xp 10000xp
drawing units. Then in the Paper Space activate the Object Space
Window and do a "zoom 5xp". 5:1 5xp 50xp 5000xp
2:1 2xp 20xp 2000xp
1:1 1xp 10xp 1000xp
The rule is very simple:
"zoom" (millimetres in one drawing unit) x (scale) "xp" 1:2 0.5xp 5xp 500xp
1:5 0.2xp 2xp 200xp
1:10 0.1xp 1xp 100xp
For exemple: if I draw in centimetres (10 mm each) and I want to print at
1:20 0.05xp 0.5xp 50xp
1:50, I will do a "zoom":
1:25 0.04xp 0.4xp 40xp
(10) x (1/50) = 10/50 = "0.2xp" or even directly "10/50xp"
1:50 0.02xp 0.2xp 20xp
1:100 0.01xp 0.1xp 10xp
Other exemple: if I draw in metres (1000 mm each) and I want to print at
1:200, I will do a "zoom": 1:200 0.005xp 0.05xp 5xp
(1000) x (1/200) = 1000/200 = "5xp" or even directly "1000/200xp" 1:250 0.004xp 0.04xp 4xp
1:500 0.002xp 0.02xp 2xp
If you cannot memorize this simple rule, you can print the reference 1:1000 0.001xp 0.01xp 1xp
table on this page. 1:2000 0.0005xp 0.005xp 0.5xp
Memo: The shortcut command for zooming is usually "z", so write simply 1:5000 0.0002xp 0.002xp 0.2xp
"z 0.2xp" (Enter).
http://www.printwhatyoulike.com/print?url=http%3A%2F%2F5ko.free.fr%2Fen%2Facad.html 1/1