Professional Documents
Culture Documents
B. SOP-DUTA-SFTY-2 - Alat Pelindung Diri
B. SOP-DUTA-SFTY-2 - Alat Pelindung Diri
: SOP-DUTA-SFTY-02
PT. DUTA UTAMA TEHNIK ABADI Page: 1 of 5
MECHANICAL-ELECTRICAL-CONDTRUCTION
Alat Pelindung Diri (APD) Date: 17 December 2013
Rev. No: 0
Doc. No.: SOP-DUTA-SFTY-02
PT. DUTA UTAMA TEHNIK ABADI Page: 1 of 5
MECHANICAL-ELECTRICAL-CONDTRUCTION
Alat Pelindung Diri (APD) Date: 17 December 2013
Rev. No: 0
Revision History
Table Of Contents
Contents ............................................................................................................... 2
The Following personal Protective gadgets are to be provided and used by all personel.
All Personel will be issued with safety helmet, which shall be required to be worn at
any time in the construction site. Safety helmets shall be checked periodically of sign
of wear or any damage. Old ones shall be discarded and replaced with the new one.
Specified working gloves shall be used by personal involved in works which are
exposed to the following hazards :
i) Risk of abrasion
ii) Risk of cutting
iii) Risk of tearing
iv) Risk of burn or chemical
v) Risk of infection
The wearing of gloves shall be avoided, as far as practical when worker approaches to
a rotating or moving object.
Suitable safety footwear shall be worn by personel involved in works which are
exposed to the following hazards :
Doc. No.: SOP-DUTA-SFTY-02
PT. DUTA UTAMA TEHNIK ABADI Page: 1 of 5
MECHANICAL-ELECTRICAL-CONDTRUCTION
Alat Pelindung Diri (APD) Date: 17 December 2013
Rev. No: 0
Suitable ear protection shall be worn by personel working in areas of high noise level
or when using tools or equipment that generate high noise level.
i) External cup type which fits over the ears shall be worn to higher noise level
ii) Internal plug type usually made of compressible foam and fits inside the ears may
be worn to lower noise level
iii) Equipment generating high noise levels shall be equipped with sound muffler and
be located far enough not to disturb works.
Suitable eye protection shall be worn by personel involved in works which are
exposed to the following hazards :
i) Radiation glare
ii) Hot sparks or metal spatter
iii) Dust ingress
iv) Flying particles
v) Chemical splash
vi) Harmful vapors
For welding works proper welding helmet with specified dark glasses shall be used.
Scratched or fogged glasses shall be replaced with new one.
Doc. No.: SOP-DUTA-SFTY-02
PT. DUTA UTAMA TEHNIK ABADI Page: 1 of 5
MECHANICAL-ELECTRICAL-CONDTRUCTION
Alat Pelindung Diri (APD) Date: 17 December 2013
Rev. No: 0
Safety belt shall be worn by personnel working at elevated level higher than 2.0
meters above ground or above water, where proper elevated platforms are not
available or not practical.