as specifed, inclusive of trasport of samples to laboratory
6.00 Drilling through rock including rock Rate only
coring
7.00 Installation of standpipes to required Nos. 0.00
depth in the borehole, and moniroring during period of contract. 8A Excavation of test pits of plan dimensions 1.5m x 1.5m, 8A.1 Up to 1.2m depth Nos. 0.00 8A.2 For depths greater than 1.2m Nos. 0.00
8B Excavation of pit or trench to a depth Rate only
greater than 1.2m for purpose of locating underground sservices.
9.00 In situ Tests (Other than SPT)
9.10 Vane Shear Test Nos. 0.00 9.20 Permeability Test Nos. 0.00 9.30 Static Cone Penetration Test Nos./m 0.00 9.40 Plate Bearing Test Nos. 0.00 9.50 Pressuremeter Test Nos. 0.00 9.60 In situ density Test Nos. 0.00 9.70 Other probing test, as specidied Nos./m 0.00
10.00 Collecting Groundwater samples Nos. 0.00
(Note the rates for testing of these samples are required separately in 11.11 to 11.13
11.00 Laboratory Tests
11.10 Natural Moisture content Rate only 11.20 Bulk density and dry density Rate only 11.30 Proctor compaction test Rate only 11.40 Specific Gravity Rate only 11.50 Particle size distribution i) Sieve analysis only Rate only ii) Sieve analysis and hydrometer Rate only analysis 11.60 Atterberg Limits Rate only 11.70 Organic content Rate only 11.80 Consolidation Tests with at least …... Rate only Loading increments and …... Unloading increments
11.90 Triaxial Test (minimum 3 specimens)
i) UU Test Rate only
ii) CU Test with pore water pressure Rate only measurements iii) CD Test Rate only iv) any other test, as specified Rate only 11.10 Direct Shear Test (minimum 3 Rate only specimens) 11.11 Tests for Sulphate Rate only 11.12 Tests for Chioride Rate only 11.13 pH Test Rate only 11.14 Uniaxial compressive Test on rock Rate only cores 11.15 Any other tests, as specified Rate only
12.00 Provision for complying with other Lump Sum
requirements ( e.g. Surveying, insurance, etc.) of the specification