You are on page 1of 1

Pensula SS (Penjejak Surya Lajur Satu Sumbu)

Technical Specification
PV Module
PV Module supported Up to 600 Wp

Structural & Mechanical


Tracking Type Horizontal single - axis tracker

Maximum capacity per row 50kW base on 545W PV modules


Maximum quantity PV module per
1 x 92 pcs
row
Maximum lingked rows 32
Drive type Rotating Pin Gear drive
Array High 45" (1143 mm above grade) minimum
Tracking range ±50o
Module configuration Single in portrait
Module attachment Single fastener
Ground Coverage Ratio (GCR) 30% up to 55% typical
Flexibility of terrain N-S up to 8.5o; E-W up to 35o
Structural material HDG steel and Al alloy
Foundation Steel pile, concrete
Quantity of foundation pe MW Normaly 400pcs/MW
Allowable wind load 225 km/jam 3 second exposure

Electrical
Motor type 3ph, 380 VAC
MW per drive motor 1.2 MW DC
Motor drive type 2.2 kW, 3 ph, 380VAC
Solar Tracking Method Optical close loop controller
Controller Power Supply 12 to 24 VDC

Protection
Night Stow mode Yes
Motor drive Overload Yes
Wind load Yes

You might also like