WESTCO LAND SDN BHD (Company No. 458875-D)
23, Jalan Seri Sentosa 2B, Taman Seri Sentosa, off Jalan Klang Lama, $8000, Kuala Lumpur
‘Tel : 03-77882033 Fax : 03-77882032. Email : westcoland@gmail.com
SUBMISSION FORM
To Xeshmen Consult Sdn hd Refs we fre-ee(ar- 182
Date» 005 [21
Intevin 4 Ws lactyw
poues 2 146
‘CADANGAN MEMBINA SESEBUAH BANGLO 2 TINGKAT DAN 1 BASEMEN BESERTA KOLAM RENANG DI ATAS LOT
PT 32373, NO. 15, JALAN PIU 3/17, TROPICANA INDAH RESORT HOMES, 47410 PETALING JAYA, SELANGOR
DARUL EHSAN UNTUK MYLUXZWORLD COM SDN BHD
HSF-No.1- met wetuod of Staremont
Description
Kindly welp to Gud attactcd Wamdity for tue MIT wchusd
Statemsat tor your approval: Pile Cuosew is +
Pie Wo: It
Test toad IBSOEN-
Twat You.
Submitted by Myluxzwowd Cova SAK Bud
Essential Design lntegiaced
Edvioud Suipiaay LW) Sdn Bia
Name LAU 2U6N HOG
Consultant Reply
Consultant c
Signature
Name
Dateff
‘s/¢y
aD
y
-
ayy lS
Kc
| [fear ae
7 orn ah
GaN Ho}
e Or LIP |
Scanned by CamScannerMETHOD STATEMENT OF MAINTAINED LOAD TEST
(USING MACHINE AND COUNTERWEIGHTS AS KENTLEDGE)
1. Scope of Work
The works consist of preparation of test site, pile head, arrangement of test
equipment and procedure in conducting the load test.
The test will be carried out using machine and steel counterweights as the
kentledge. The arrangement of test equipment and the procedure of test will
follow the conventional maintained load test.
2. Preparation Works
The ground within 3m around the test pile will be leveled and compacted
before the arrangement of equipment and kentledge. Steel plates will be
placed id necessary.
The head of the test pile will be formed to give a plane surface which is
normal to the axis of the pile, and adequately strengthened to withstand the
concentration application of load from the loading equipment. As the pile is
cut to ground level during installation, the soil around the test pile will be
removed to about 300mm below existing ground level to ensure that the load
is not transmitted to the ground except through the pile.
3. Load Test Arrangement
3.1 Kentledge
The machine and steel counterweights will be used as the kentledge.
The total weight of machine and steel blocks will be at least 10% in
excess of the test load. The machine will be moved to position
centrally over the test pile and will be resting firmly on the sleepers.
A strong universal I-beam will be sitting on stone blocks placed not
less than 2m from the edge of the test pile.3.2 Test Equipment
The test load will be applied by means of a single acting hydraulic
jack powered bay hand pump, and fitted with a load measuring
device, or a pressure gauge. The gauge used is recently calibrated
and will come with a calibration certificate for inspection by S.O.
The hydraulic jack, hose, pump, coupling and other apparatus to be
operated under hydraulic pressure are capable of withstanding a test
pressure equivalent to 1.5 times the maximum test load without
leakage.
Settlement of the pile head will be measured by means of four dial
gauges capable of reading to 0.01mm. The gauges are recently
calibrated and the calibration certificates will be submitted before
the commencement of test. An independent reference frame will be
set up to permit movement of test pile to be measured. The supports
for this frame will be located not closer than 1m from the test pile,
and fixed rigidly to the ground. The entire measuring assembly will
be protected against the rain, direct sunlight and other disturbances
that might affect its reliability. The measurement of pile movement
is made by four dial gauges mounted onto magnetic stands resting
on a piece of steel plate measuring not less than 500mm x 500mm x
25mm thick, which is positioned between the pile head and the jack.
The needles of these dial gauges, placed in diametrically opposite
positions and are equidistance from the pile axis, will bear on glass
surface attached on the reference frame.
4. Application of test load
Load is applied to the test pile following the schedule attached as appendix.
The manner reading are to be taken is also indicated.‘CALCULATION FOR REQUIRED PRESSURE ( HYDRAULIC CYLINDER MODEL CLEG2006)
(CYLINDER EFFECTIVE AREA =4122i22
TONS = 5350 51
‘Load / Pressure Conversion and Test Procedure: ‘Test Load 185 Tonnes
Toad Holding tne]
are Remarks
Comes) [PPS Gow)
Fis cycle loading schedule (65 tomes)
0 0 ° Eater ae
1625 | 86935, iz |
3230_| 13875 T ding oe aka 215 misuse inervle for howe | LOAD
a
% Tae dios ame Ten rey Oa
i
- Resting be ken st 15 mime merase hour | UNLOAD
Tas
— - ‘andingw be taken a 15 mitme mservals for Lbowr | LOAD
555.00, z Tae ieiiow aie Tan ieee Oa
3216.25, 7
00 | 347730 7
a - Reading be ken 15 msm imereals for Lor | UNLOAD
0 0.007 T
Reading be taken at 15 minute meres for our | LOAD
jeeeiaoe [ox toerl
Tes | 9597 0 Zz Tet hibe Gam Te ey
148 [_ 7918.00 7
i] sses0 | 1 |
‘Randingw be taken 215 mitme imtervls for hear | UNLOAD
Toss =end Tet ac
Plan Of Load Test Assembly