Professional Documents
Culture Documents
13_55
Elastic Coupling
contents
unrestrained restrained
fig. 5582/5584 fig. 5592/5594
Econ expansion joints of the unrestrained type may be used only if:
- all anticipated movements can be absorbed
- the pipeline is adequately anchored and guided
- the plant and piping is not subjected to excessive forces and movements.
Expansion joints of the restrained type are recommended in all other cases.
pressure/temperature rating: fig. 5582/5584: 16 bar - 40 °C; 3 bar - 90 °C max. allowable short term
(bellows) fig. 5592/5594: 3 bar - 90 °C temperature: 100 °C
on request: one end flanged to DIN PN 10 and the other end to ANSI Class 150: fig. 5582D/A
remark: Apart from the ECONFLEX expansion joints with rubber bellows, we also
supply expansion joints made of stainless steel, or other materials and
with other pressure classes, according to the requirements of our
customers.
Besides, we also supply metal hoses of which the details will be provided
upon request.
dimensions (mm): DN 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500
11/4” 11/2” 2” 21/2” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20”
D 40 40 52 68 76 103 128 152 194 250 300 320 372 415 454
L 95 95 105 115 130 135 170 180 205 240 260 265 265 265 265
fig. 5582/5592 140 150 165 185 200 220 250 285 340 395 445 505 565 615 670
A1)
fig. 5584/5594 45/8” 5” 6” 7” 71/2” 9” 10” 11” 131/2” 16” 19” 21” 231/2” 25” 271/2”
1) all flanges drilled axial compression 2 ) 8 8 12 12 18 18 18 25 25 25 25 25 25 25 25
to the corresponding
figure number axial elongation 4 4 5 6 6 10 10 10 14 14 14 16 16 16 16
2) for axial compression
lateral 8 8 8 10 10 12 12 22 22 22 22 22 22 22 22
the guide plate must
be reversed and the fig. 5582/5592 wt 3.5 3.5 4 4.5 7 7.5 8.5 12.5 17 24 26 39.6 47.2 59 70
tie bars must be (kg)
provided with extra nuts fig. 5584/5594 4 4 4.5 6 8.5 10 12.5 17 24 33 40 59.2 69 83 97