Professional Documents
Culture Documents
Stud Test: 1.-Welding Test For Stud M10X30Mm L Full Thread, 316 ST STL, Plain
Stud Test: 1.-Welding Test For Stud M10X30Mm L Full Thread, 316 ST STL, Plain
1.- WELDING TEST FOR STUD M10X30MM L FULL THREAD, 316 ST STL, PLAIN.
Note:
GTAW process, ER309L filler metal, Welding
Procedure Specification(WPS-27-10-2012).
satisfactory visual inspection of weld,
minium weld size.
2.-TORQUE TESTING:
34.42 Nm
33.67
34.42 Nm
33.86 Nm
34.51
34.18 Nm
3.-BEND TESTING:
Note:
Bending the Stud using pipe, 5 stud to be
bent 30°. The Stud bend did not break in
the weld, it is satisfactory.
4.- CONCLUSIONS:
Torque and Stud bends were acceptable on Studs M10x30mm L full thread, 316 St Stl,
plain, which are within the client's requirements according to Fabrication Procedures
Manual(GTI-EG-P-002 rev5) Page 57 and 109.