Professional Documents
Culture Documents
SOLUTION
Product Catalogue
2019
About Us
Comba Telecom is a leading supplier of infrastructure and
wireless enhancement solutions to mobile operators and enter-
prises to enhance and extend their wireless communications
networks. Established in 1997, and listed on the Hong Kong Stock
Exchange in 2003, it has grown to become a global supplier with
its extensive distribution network and 60+ offices globally.
Small Cells
Compliant to all major technologies including GSM, CDMA, WCDMA, LTE, and Tetra.
Widely frequency range compliance e.g. 700MHz, 800MHz, 850MHz, 900MHz, 1800MHz, 1900MHz, AWS, 2100MHz,
2300MHz and 2600MHz.
Support multi-modulations and multi-operators applications so that providing cost-effective solutions.
Support various output power from 0.01 W to 40 W.
Wide range of product line that can be used from high-rise building to underground railway for all kinds of applications.
Product Overview
Comba DAS - ComFlex Series Overview
Highlight:
Max. 100W input power from BTS.
-163dBc PIM.
WEB GUI, RF routing and diagnosis function.
Max. supports 32 RF input and 32 RUs connection.
RU output power 1/2/5/10/20/40W.
Highlight:
Max. 100W input power from BTS.
-163dBc PIM.
WEB GUI, RF routing and diagnosis function.
Max. supports 32 RF input and 32 RUs connection.
Modular designed RU supports up to 8 bands,
20W per band without fan.
Highlight:
Max. 100W input power from BTS.
-163dBc PIM.
Supports flexible SISO & MIMO and multi-sector.
RU output power 1/2/5/10/20/40W.
WEB GUI.
Highlight:
Max. supports 8 RF input and 16 RUs.
Modular design easy for upgrade and maintenance.
Supports multi-operator input and each adjustable gain.
RU output power 1/2/5/10/20/40W.
WEB GUI, automatic calibration and commissioning.
Highlight:
Max. supports 8 RF input and 16 RUs.
Modular design easy for upgrade and maintenance.
Supports multi-operator input and each adjustable gain.
RU output power 1/2/5/10/20/40W.
WEB GUI, automatic calibration and commissioning.
Comba Wireless Repeater Series Overview
Highlight: Highlight:
Support indoor. Support outdoor.
3 Sub bands, 80 dB gain. 3 Sub bands, 80 dB gain.
0.5/1/2W output power. 0.5/1/2W output power.
Support up to 6 Bands. Support Dual/Tri Bands.
Highlight: Highlight:
Support indoor. Support indoor.
2 Sub bands, 75 dB gain. 2 Sub bands, 75 dB gain.
13/15/17dBm output power. 15/17dBm output power.
Support Single Band. Support Dual/Tri Bands.
Central Freq./ band width settable. Central Freq./ band width settable.
CMS Typical Network Management Diagram
Comba Base Station Series Overview
Indoor Base Station Solution
Highlight:
Support different scenarios application from hundreds to ten thousand square meters
Support different Single/Dual Band operation
Different output power level50mW/100mW/125mW and cascade networking
Highlight: Highlight:
Support 4 Carriers (GSM/EDGE/GPRS). TDD/FDD & Customized Band Design
Support output power level up to80W 5MHz/10MHz/15MHz/20MHz bandwidth support.
Innovative IP-Based backhaul Support output power level up to 80W
Comba User Equipment Overview
Highlight: Highlight:
LTE Cat 4/6/12 LTE Cat4/6
High Antenna Gain Compact & Smart footprint
High Speed Data Rate Customized Band Available
Customized Band Available
DAS Series
700/800E/850/900/1800
1W
ComFlex /1900/AWS/2100/2300/ GSM/UMTS/
(Max.
MU 2600 LTE/CDMA
Input)
Max. 8
MU
700/800E/850/900/1800
100 W
ComFlex 1900/AWS/2100/2300/ GSM/UMTS/
(Max.
Plus ACU 2600 LTE/CDMA
Input)
Max. 32
700/800/850/900/1800/
Low Power 2/5W 1900/AWS/2100/2300/ GSM/UMTS/
RU (Output) 2600 LTE/CDMA
Max. 4
700/800/850/900/1800/
High Power 20/40W 1900/AWS/2100/2300/ GSM/UMTS/
RU RU (Output) 2600 LTE/CDMA
Max.4
700/800E/850/900/1800
/
10/20W GSM/UMTS/
Modular RU 1900/AWS/2100/2300/
(Output) LTE/CDMA
2600
Max. 8
Wireless Enhancement Product Profile
Band GSM/
800/850/900/1800/1900/
Selective RX-xx39 5/10W UMTS/
2100/2600
RX Series LTE/CMDA
Channel GSM/
5/10
Selective RX-xx23 800E/900/2100 UMTS/
/20W
RX Series LTE
GSM/
mBDA 0.5/1/ 800E/850/900/1800/1900
mBDA-xx33 UMTS/
Outdoor 2W AWS/2100/2600
LTE/CDMA
GSM/
mBDA mBDA-RF- 0.5/1/ 800E/850/900/1800/1900
UMTS/
Indoor xx00 2W AWS/2100/2600
LTE/CDMA
Single GSM/
15/17/ 800/850/900/1800/1900/
Band MP-xx32 UMTS/
20dBm 2100/2600
mPico LTE/CDMA
Multi
GSM/
17/
Band MP-xx32 800/900/1800/2100 UMTS/
20dBm
LTE/CDMA
mPico
Wireless Access Product Profile
Home B3/B40
50mw
Small HNB-35,A01 FDD 1800 LTE
x2
Cell TDD 2300
B1/B3/B7/B40
Enterpri ENB-35L 125mw
FDD 2100/1800/2600 LTE
se Pico x2
TDD 2300
LTE B1/2/3/4
or
PolyCell 125mw LTE B2+UMTS B4 GSM/UMTS/
ENB-35xxx
1.0 x2 LTE B7+UMTS B1 LTE
or
LTE B3+GSM1800
4 GSM/EDGE/GPRS
GSM
ENB-10, A57 N/A Carriers GSM
BBU
Indoor/Outdoor Type
CPE Series
LTE FDD
B1/B3/B5/B7/B8/B20
LTE TDD B40 GSM/UMT
Indoor AP2600-IDU
CAT4 UMTS B1/B5/B8 S/
CPE ,A6
GSM LTE
850/900/1800/1900
Wi-Fi 2.4/5.8GHz
Outdoor AP2600-OP,
CAT4 LTE TDD B38/39/40/41 LTE
CPE A14
Core Network
2
Product application Scenario 1: Mega (>10,000 m )
Park Supermarket
Product Recommend:
Product Recommend:
Wireless RepeatermBDA Series
Wireless RepeatermBDA Series
Wireless Repeater Pico
Wireless Repeater Pico
Small Cell –Enterprise Pico
Index
ComFlex Series Distributed Antenna System............................................................................................22
ComFlex-5H00(CI) 1W2W..........................................................................................................23
ComFlex-5000(CI) 1W2W.......................................................................................................... 26
ComFlex-6100(CI) 1W................................................................................................................ 29
ComFlex-6800(CI) 20W40W......................................................................................................32
ComFlex-6900(CI)....................................................................................................................... 35
ComFlex-4500(CI) 2W5W.......................................................................................................... 38
ComFlex-4100(CI) 5W................................................................................................................ 41
ComFlex-5200(CI) 20W40W......................................................................................................44
ComFlex-5P00 (CI) 20W.............................................................................................................47
ComFlex-5000(CI) 20W40W......................................................................................................50
ComFlex-4300(CI) 40W.............................................................................................................. 53
ComFlex-4500(CI) 10W20W......................................................................................................56
ComFlex-4C00 (CI) 20W40W.................................................................................................... 59
ComFlex-4100(CI) 40W.............................................................................................................. 62
ComFlex CM 20W........................................................................................................................65
ComFlex CM 20W........................................................................................................................68
ComFlex-8A00 (CM) 20W.......................................................................................................... 71
ComFlex-8B00 (CM) 20W.......................................................................................................... 74
ComFlex-8C00 (CM) 20W.......................................................................................................... 78
ComFlex-5M00(AI) 10W20W.....................................................................................................81
ComFlex AM................................................................................................................................. 84
ComFlex-5900(AM) 20W............................................................................................................88
ComFlex-4100(AM) 20W............................................................................................................91
ComFlex-8A00 (AM) 20W.......................................................................................................... 94
RX Series Digital Band Selective Repeater................................................................................................98
RX-0739....................................................................................................................................... 100
RX-8132....................................................................................................................................... 101
RX-9139....................................................................................................................................... 102
RX-1823....................................................................................................................................... 103
RX-1839....................................................................................................................................... 105
RX-1939....................................................................................................................................... 106
RX-2139....................................................................................................................................... 107
RX-2620....................................................................................................................................... 108
RX-2623....................................................................................................................................... 109
RX Series Multi-band Digital Band Selective Repeater............................................................................111
RX-7137....................................................................................................................................... 114
RX-7539....................................................................................................................................... 116
RX-7639....................................................................................................................................... 118
RX-7839....................................................................................................................................... 120
RX-5239....................................................................................................................................... 122
RX Series Digital Channel Selective Repeater.........................................................................................124
RX-2123 III3.................................................................................................................................124
RX-0823....................................................................................................................................... 126
RX-0823....................................................................................................................................... 128
RX-2123 IV4................................................................................................................................ 129
RX-0823....................................................................................................................................... 132
RX-9123....................................................................................................................................... 133
RX-9123 IV4................................................................................................................................ 136
800MHz Tetra Band Selective Repeater...................................................................................................138
RX-8039....................................................................................................................................... 138
Critical Point™ Public Safety Bi-Directional Amplifier.............................................................................140
RX-7W22 Class A PS 700/800MHz BDA.............................................................................. 140
RX-7W22Class B PS 700/800MHz BDA............................................................................... 143
RX-4122 PS UHF 400MHz BDA..............................................................................................146
Critical Point™ Public Safety Distributed Antenna System..................................................................... 148
RH-7W22 PS 700/800MHz DAS..............................................................................................148
mBDA Series Digital Band Selective Repeater........................................................................................ 152
mBDA-0733.................................................................................................................................153
mBDA-9133.................................................................................................................................154
mBDA-1833.................................................................................................................................155
mBDA-1933.................................................................................................................................156
mBDA-2033.................................................................................................................................157
mBDA-2133.................................................................................................................................158
mBDA-2633.................................................................................................................................159
Combiner for Dual Single Band mBDAs..................................................................................................160
mBDA Indoor Digital Band Selective Repeater........................................................................................162
mBDA-100...................................................................................................................................162
mBDA-200S................................................................................................................................ 166
mBDA-200SS............................................................................................................................. 172
mBDA-300...................................................................................................................................178
MP Series Digital Pico Repeater..............................................................................................................184
MP-0832.......................................................................................................................................185
MP-8132.......................................................................................................................................186
MP-9132.......................................................................................................................................187
MP-1832.......................................................................................................................................188
MP-1932.......................................................................................................................................189
MP-2132.......................................................................................................................................190
MP-2632.......................................................................................................................................191
Multi-band Digital Pico Repeater.............................................................................................................192
Dual-band Digital Pico Repeater............................................................................................................. 193
MP-7V32...................................................................................................................................... 193
MP-7532.......................................................................................................................................195
Dual-band Digital Pico Repeater............................................................................................................. 197
MP-7632.......................................................................................................................................197
MP-7832.......................................................................................................................................199
Tri-band Digital Pico Repeater................................................................................................................ 200
MP-5K32...................................................................................................................................... 200
MP-5232.......................................................................................................................................201
MP-5832.......................................................................................................................................202
LTE1800 ICS Pico Repeater.....................................................................................................................203
SN-1823....................................................................................................................................... 203
Home Small Cell..................................................................................................................................... 206
HNB-35,A01................................................................................................................................ 206
Enterprise PiCO......................................................................................................................................208
ENB-35L...................................................................................................................................... 208
PolyCell Solution.................................................................................................................................... 210
DP (Distributed Point)............................................................................................................................. 212
CP (Center Point)....................................................................................................................................214
CK (Cell Kernel)...................................................................................................................................... 215
GSM IP-Base Station...............................................................................................................................216
RRU........................................................................................................................................................216
ENB-10, A57R............................................................................................................................ 217
BBU........................................................................................................................................................218
ENB-10, A57............................................................................................................................... 218
LTE eNodeB............................................................................................................................................219
Indoor CPE............................................................................................................................................. 222
AP2600-IDU, A06.......................................................................................................................222
Outdoor CPE.......................................................................................................................................... 223
AP2600-OP, A14.........................................................................................................................223
CP2600-OP, A10.........................................................................................................................224
Comba EPC System................................................................................................................................226
Gateway................................................................................................................................................. 228
Coverage Management System.............................................................................................................. 230
CMS V8.2.....................................................................................................................................230
ComFlex DAS Series
Page 24 of 234
ComFlex Series Distributed Antenna System
ComFlex-5H00(CI) 1W2W
Features
Modularized Master Unit supports field upgrade and independent gain control.
RF module supports both simplex and duplex.
Compact slim Remote Unit for OPEX saving.
Full operation bandwidth system supports multi-operator application.
Supports all major technologies GSM, CDMA, WCDMA and LTE.
Comply with 3GPP.
Optical link auto gain control.
Web based GUI for intelligent commissioning and configuration.
Product Description
The ComFlex series Distributed Antenna System is an RF over fibre solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and low power Remote Unit (RU). The MU includes the Chassis,
Power Supply Unit (PSU), Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can
support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a compact
and slim form factor for easy installation; it is an integrated design which supports 3 independent bands,
850MHz, 1900MHz and 2600MHz.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba Tri-Band DAS offers service providers an optimal solution for
multiple applications from a single building to a campus, mega mall, or sports arena and beyond.
Page 23 of 232
Specifications
Optical
System 850MHz, 1900MHz, 2600MHz
Optical Fiber Single Mode
Optical Wavelength nm 1310, 1550 + WDM
Electrical
850MHz 1900MHz 2600MHz
Uplink Frequency Range 824-849 1850-1910 2500-2570
MHz
Downlink Frequency Range 869-894 1930-1990 2620-2690
Operating Bandwidth MHz 25 60 70
Uplink Output Power dBm -25 -25 -25
Downlink Output Power dBm 30/33 30/33 30/33
Mechanical---MU
Chassis 178 x 482x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 12
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
Operating Temperature °C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Page 24 of 232
Specifications
Mechanical---LRU
1W 2W
Dimensions, H x W x D mm 680 x 260 x 180
Weight kg 25
RF Connectors N-Female
Page 25 of 232
ComFlex Series Distributed Antenna System
ComFlex-5000(CI) 1W2W
Features
Modularized Master Unit supports field upgrade and independent gain control.
RF module supports both simplex and duplex.
Compact slim Remote Unit for OPEX saving.
Full operation bandwidth system supports multi-operator application.
Supports all major technologies GSM, CDMA, WCDMA and LTE.
Comply with 3GPP.
Optical link auto gain control.
Web based GUI for intelligent commissioning and configuration.
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and low power Remote Unit (RU). The MU includes the Chassis,
Power Supply Unit (PSU), Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can
support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a compact
and slim form factor for easy installation; it is an integrated design which supports 3 independent bands,
1900MHz, AWS and AWS MIMO.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba Tri-Band DAS offers service providers an optimal solution for
multiple applications from a single building to a campus, mega mall, or sports arena and beyond.
Page 26 of 232
Specifications
Optical
1900MHz, AWS, AWS
System
MIMO
Optical Fiber Single Mode
Electrical
1900MHz AWS AWS MIMO
Uplink Frequency Range 1850-1910 1710-1755 1710-1755
MHz
Downlink Frequency Range 1930-1990 2110-2155 2110-2155
Operating Bandwidth MHz 60 45 45
Uplink Output Power dBm -25 -25 -25
Downlink Output Power dBm 30/33 30/33 30/33
Page 27 of 232
Mechanical---MU
Chassis 178 x 482x 360
Chassis 12
RF Connectors N-Female
Mechanical---LRU
1W 2W
Dimensions, H x W x D mm 680 x 260 x 180
Weight kg 25
RF Connectors N-Female
Page 28 of 232
ComFlex 600 Series DAS
ComFlex-6100(CI) 1W
Features
Industry’s first DAS system with superior PIM performance MINI-DIN RF connectors.
Independent coupling port for uninterrupted network testing.
Modular Master Unit supports flexible field upgrade and maintenance.
Independent gain control for each RF source.
High MTBF and low noise design with modular PSU and convection cooling.
RF module supports both simplex and duplex.
Compact, slim Remote Unit for OPEX saving.
Supports multi-operator and mixed mode application.
Optical link auto gain control.
Web based GUI for intelligent commissioning and configuration.
Product Description
The ComFlex 600 series Distributed Antenna System is an RF over fiber solution that enhances a
wireless network’s coverage by extending cellular services from existing cell sites to an indoor
environment. The system consists of the Master Unit (MU) and Low power Remote Unit (RU). The MU
includes the Chassis, Power Supply Unit (PSU), Fiber Optical Unit (FOU) and RF Unit (RFU). With a
modular design, it can support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is
designed with a compact and slim form factor for easy installation; it is an integrated design which
supports 6 independent bands: 700MHz (lower ABC), 700MHz (upper C),800MHz, 850MHz, 1900MHz,
and AWS band.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba Hex-Band DAS offers service providers an optimal solution for
variable venue sizes such as single buildings, office campuses, megamalls and sports arenas.
Page 29 of 232
Specifications
Optical
700MHz (lower ABC), 700MHz (upper C), 800MHz, 850MHz, 1900MHz,
System
AWS
Optical Fiber Single Mode
Electrical
700MHz 800/850MHz 1900MHz AWS
Uplink Frequency Range 698-716/776-787 817-824/824-849 1850-1915 1710-1755
Downlink Frequency MHz
728-746/746-757 862-869/869-894 1930-1995 2110-2155
Range
Operating Bandwidth MHz 18/11 7/25 65 45
Uplink Output Power dBm -25 -25 -25 -25
Downlink Output Power dBm 30 30 30 30
Uplink Maximum Gain dB 20
Downlink Maximum Gain dB 20
ATT Adjustable
dB MU: 0-40, RU: 0-30
Range(1dB step)
Pass Band Ripple (p-p) dB ≤4 ≤6 ≤6 ≤4
3GPP TS 25.106
3GPP TS 36.106 3GPP TS 36.106 3GPP TS 25.106
Spurious Emission 3GPP TS 36.106
FCC FCC FCC
FCC
Uplink Noise Figure at
dB ≤6
Maximum Gain
System Delay sec ≤3
VSWR ≤ 1.5
Max. Input RF Power at
dBm 30
Master Unit
Page 30 of 232
Specifications
Mechanical---MU
Chassis 7” x 19” x 15.7” (178 x 482x 400)
Operating Temperature °C 0 to 40
Mechanical---RU
Remote Unit 23.6” x 9.8” x 5.9” (600 x 250 x 150)
Dimensions, H x W x D in(mm)
Power Supply Unit 16.1” x 4.4” x 3.5” (408 x 111 x 90)
Remote Unit 44.1 (20)
Weight (approx.) lb(kg)
Power Supply Unit 7.7 (3.5)
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 120
RF Connectors Mini DIN-Female
QMA-Female
Coupling Port Connectors (For DL related testing, coupling value: -45dB:700&850&800;
-35dB:1900&AWS)
QMA-Female
RF Expansion Port
(1 x TX_EXT + 1 x RX_EXT)
Fiber Connectors SC/APC
Operating Temperature °C -20 to 50
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Convection
Installation Type Wall and Pole
Page 31 of 232
ComFlex Series Distributed Antenna System
ComFlex-6800(CI) 20W40W
Features
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and high power Remote Unit (RU). The MU includes the Chassis,
Power Supply Unit (PSU), Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can
support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a compact
and slim form factor for easy installation.
This solution is an effective point-to-multipoint distributed antenna system that provides flexible and
scalable solution of multi-band, multi-operator coverage extension applications, such as citywide
enhancement, highway, canyons, campus, underground tunnels, airports, convention centers, etc.
Page 32 of 232
Specifications
Optical
System 700MHz, 800MHz, 850MHz, 1900MHz, AWS1+AWS3
Optical Fiber Single Mode
Optical Wavelength nm 1310, 1550 + WDM
Electrical
700MHz 800/850MHz 1900MHz AWS1+AWS3
Uplink Frequency Range 698-716/776-787 817-824/824-849 1850-1915 1710-1780
Downlink Frequency MHz
728-757 862-869/869-894 1930-1995 2110-2180
Range
Operating Bandwidth MHz 18/11 7/25 65 70
Downlink Output Power dBm 43/46 43/46 43/46 43/46
Uplink Maximum Gain dB 33
Downlink Maximum Gain dB 36
ATT Adjustable
dB MU: 0-40, RU: 0-30
Range(1dB step)
Pass Band Ripple (p-p) dB ≤5 ≤5 ≤6 ≤6
3GPP TS 25.106
Spurious Emission 3GPP TS 36.106 3GPP TS25.106 3GPP TS 25.106
3GPP TS 36.106
Uplink Noise Figure at
dB ≤6
Maximum Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Input RF Power at
dBm 30
Master Unit
Mechanical---MU
Chassis 178 x 482 x 360
Chassis 12
Page 33 of 232
Specifications
Mechanical---HRU
Dimensions, H x W x D mm 1350 x 315 x 225
Weight (approx.) kg 70
RF Connectors DIN-Female
Page 34 of 232
ComFlex Series Distributed Antenna System
ComFlex-6900(CI)
Features
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and high power Remote Unit (RU). The MU includes the Chassis,
Power Supply Unit (PSU), Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can
support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a compact
and slim form factor for easy installation.
This solution is an effective point-to-multipoint distributed antenna system that provides flexible and
scalable solution of multi-band, multi-operator coverage extension applications, such as citywide
enhancement, highway, canyons, campus, underground tunnels, airports, convention centers, etc.
Page 35 of 232
Specifications
Optical
System 2300MHz, 2300MIMO, 2500MHz, 2500MIMO
Optical Fiber Single Mode
Optical Wavelength nm 1310, 1550 + WDM
Electrical
2300MHz 2300MIMO 2500MHz 2500MIMO
Uplink Frequency Range 2305-2315 2305-2315 2496-2690 2496-2690
MHz
Downlink Frequency Range 2350-2360 2350-2360 2496-2690 2496-2690
3, 5, 10, 15, and 3, 5, 10, 15, and
Operating Bandwidth MHz 3, 5, and 10 3, 5, 10
20 20
Downlink Output Power dBm 46 46 46 46
Uplink Maximum gain dB 30
Downlink Maximum gain dB 36
ATT Adjustable Range(1dB
dB 0-30
step)
Pass Band Ripple (p-p) dB ≤4 ≤4 ≤6 ≤6
3GPP TS 3GPP TS
Spurious emission 3GPP TS36.106 3GPP TS 36.106
36.106 36.106
Uplink Noise Figure at Maximum
dB ≤5
Gain
System Delay sec ≤ 3.5
VSWR ≤ 1.5
Max. Input RF Power at Master
dBm 30
Unit
Mechanical---MU
Chassis 178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 12
Fiber Optical Unit 2
Weight (approx.) kg
RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240; 50/60Hz
Power Consumption (approx.) W 85
RF Connectors 4.3-10
Fiber Connectors SC/APC
Operating Temperature °C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Page 36 of 232
Specifications
Mechanical---HRU
40W
Dimensions, H x W x D mm 1350 x 315 x 225
Weight (approx.) kg 70
RF Connectors DIN-Female
Page 37 of 232
ComFlex Series Distributed Antenna System
ComFlex-4500(CI) 2W5W
Features
Modularized Master Unit supports field upgrade and independent gain control.
RF module supports both simplex and duplex.
Compact slim Remote Unit for OPEX saving.
Full operation bandwidth system supports multi-operator application.
Supports all major technologies GSM, CDMA, WCDMA and LTE.
Optical link auto gain control.
Web based GUI for intelligent commissioning and configuration.
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and medium power Remote Unit (RU). The MU includes the
Chassis, Power Supply Unit (PSU), Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design,
it can support up to8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a
compact and slim form factor for easy installation; it is an integrated design which supports 4
independent bands,900MHz, 1800MHz, 2100MHz and 1800MIMO.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba Quad-Band DAS offers service providers an optimal solution for
multiple applications from a single building to a campus, mega mall, or sports arena and beyond.
Page 38 of 232
Specifications
Optical
System 850MHz, 1800MHz, 2100MHz, 2600MHz
Electrical
850MHz 1800MHz 2100MHz 2600MHz
Uplink Frequency Range 824-849 1710-1785 1920-1980 2500-2570
Downlink Frequency MHz
869-894 1805-1880 2110-2170 2620-2690
Range
Operating Bandwidth MHz 25 75 60 70
Uplink Output Power dBm -20 -20 -20 -20
Downlink Output Power dBm 33/37 33/37 33/37 33/37
Uplink Maximum gain dB 23@2W, 27@5W
Downlink Maximum gain dB 23@2W, 27@5W
ATT Adjustable
dB MU: 0-40, RU: 0-30
Range(1dB step)
Pass Band Ripple (p-p) dB ≤4 ≤5 ≤5 ≤5
Spurious emission 3GPP TS 25.106 3GPP TS 36.106 3GPP TS 25.106 3GPP TS 36.106
Uplink Noise Figure at
dB ≤6
Maximum Gain
System Delay sec ≤3
VSWR ≤ 1.5
Max. Input RF Power at
dBm 30
Master Unit
MTBF hr >100,000
Page 39 of 232
Mechanical---MU
Chassis 178 x 482x 360
Chassis 11
RF Connectors N-Female
Specifications
Mechanical---MRU 2W 5W
Remote Unit 660 x 250 x 160
Dimensions, H x W x D mm
Power Supply Unit 408 x 111 x 90
Remote Unit 25
Weight (approx.) kg
Power Supply Unit 3.5
RF Connectors N-Female
Page 40 of 232
ComFlex Series Distributed Antenna System
ComFlex-4100(CI) 5W
Features
Modularized Master Unit supports field upgrade and independent gain control.
RF module supports both simplex and duplex.
Compact slim Remote Unit for OPEX saving.
Full operation bandwidth system supports multi-operator application.
Supports all major technologies GSM, CDMA, WCDMA and LTE.
Comply with 3GPP.
Optical link auto gain control.
Web based GUI for intelligent commissioning and configuration.
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and medium power Remote Unit (RU). The MU includes the
Chassis, Power Supply Unit (PSU), Fiber Optical Unit (FOU) and RF Unit (RFU). With a modular design,
it can support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a
compact and slim form factor for easy installation; it is an integrated design which supports 4
independent bands900MHz, 1800MHz, 2100MHz and 2600MHz.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba DAS offers service providers an optimal solution for variable venue
sizes such as single buildings, office campuses, mega malls and sports arenas.
Page 41 of 232
Specifications
Optical
System 900MHz, 1800MHz, 2100MHz, 2600MHz
Optical Fiber Single Mode
Optical Wavelength nm 1310, 1550 + WDM
Electrical
900MHz 1800MHz 2100MHz 2600MHz
Uplink Frequency Range 880-915 1710-1785 1920-1980 2500-2570
MHz
Downlink Frequency Range 925-960 1805-1880 2110-2170 2620-2690
Operating Bandwidth MHz 35 75 60 70
Uplink Output Power dBm -20 -20 -20 -20
Downlink Output Power dBm 37 37 37 37
Mechanical---MU
Chassis 178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 12
Fiber Optical Unit 2
Weight (approx.) kg
RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
Operating Temperature °C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Page 42 of 232
Specifications
Mechanical---MRU
Remote Unit 660 x 250 x 160
Dimensions, H x W x D mm
Power Supply Unit 408 x 111 x 90
Remote Unit 25
Weight (approx.) kg
Power Supply Unit 3.5
RF Connectors N-Female
License Note
License Code 900MHz 1800MHz 2100MHz 2600MHz
N/A √ √ √ √
Page 43 of 232
ComFlex Series Distributed Antenna System
ComFlex-5200(CI) 20W40W
Features
Modularized Master Unit supports field upgrade and independent gain control.
High MTBF with modular PSU and convection cooling.
RF module supports both simplex and duplex.
Compact slim Remote Unit for OPEX saving.
Full operation bandwidth system supports multi-operator application.
Supports all major technologies GSM, CDMA, WCDMA and LTE.
Independent coupling port of MU for uninterrupted network testing.
Optical link auto gain control.
Web based GUI for intelligent commissioning and configuration.
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and Remote Unit (RU). The MU includes the MU Rack, Power
Supply Unit (PSU), Fiber Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can support up
to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a compact and slim
form factor for easy installation; it is an integrated design which supports 3 independent bands, 900MH,
1800MHz and 2100MHz.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba Tri-Band DAS offers service providers an optimal solution for
multiple applications from a single building to a campus, mega mall, or sports arena and beyond.
Page 44 of 232
Specifications
Optical
System 900MHz, 1800MHz, 2100MHz
Optical Fiber Single Mode
Optical Wavelength nm 1310, 1550 + WDM
Electrical
900MHz 1800MHz 2100MHz
Uplink Frequency Range 880-915 1710-1785 1920-1980
MHz
Downlink Frequency Range 925-960 1805-1880 2110-2170
Operating Bandwidth MHz 35 75 60
Uplink Output Power dBm -20 -20 -20
Downlink Output Power dBm 43/46 43/46 43/46
Uplink Maximum gain dB 33
Downlink Maximum gain dB 35@20W, 38@40W
ATT Adjustable Range(1dB step) dB MU: 0-40, RU: 0-30
Pass Band Ripple (p-p) dB ≤5 ≤6 ≤6
3GPP TS 25.106
Spurious emission 3GPP TS 25.106 3GPP TS 25.106
3GPP TS 36.106
Uplink Noise Figure at Maximum
dB ≤5
Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Input RF Power at Master
dBm 30
Unit
Mechanical---MU
Chassis 178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 11
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
Operating Temperature °C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Page 45 of 232
Specifications
Mechanical---HRU
20W 40W
Dimensions, H x W x D mm 1270 x 236x 236
Weight (approx.) kg 49
Page 46 of 232
ComFlex Series Distributed Antenna System
ComFlex-5P00 (CI) 20W
Features
Modularized Master Unit supports field upgrade and independent gain control.
High MTBF with modular PSU and convection cooling.
RF module supports both simplex and duplex.
Compact slim Remote Unit for OPEX saving.
Full operation bandwidth system supports multi-operator application.
Supports all major technologies GSM, CDMA, WCDMA and LTE.
Independent coupling port of MU for uninterrupted network testing.
Optical link auto gain control.
Web based GUI for intelligent commissioning and configuration.
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and Remote Unit (RU). The MU includes the MU Rack, Power
Supply Unit (PSU), Fiber Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can support up
to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a compact and slim
form factor for easy installation; it is an integrated design which supports 3 independent bands, 1800MH,
2100MHz and 2600MHz.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba Tri-Band DAS offers service providers an optimal solution for
multiple applications from a single building to a campus, mega mall, or sports arena and beyond.
Page 47 of 232
Specifications
Optical
System 1800MHz, 2100MHz, 2600MHz
Optical Fiber Single Mode
Optical Wavelength nm 1310, 1550 + WDM
Electrical
1800MHz 2100MHz 2600MHz
Uplink Frequency Range 1710-1785 1920-1980 2500-2570
MHz
Downlink Frequency Range 1805-1880 2110-2170 2620-2690
Operating Bandwidth MHz 75 60 70
Uplink Output Power dBm -20 -20 -20
Downlink Output Power dBm 43 43 43
Uplink Maximum gain dB 33
Downlink Maximum gain dB 35
ATT Adjustable Range(1dB step) dB MU: 0-40; RU: 0-30
Pass Band Ripple (p-p) dB ≤6 ≤6 ≤6
Spurious emission 3GPP TS 36.106 3GPP TS 25.106 3GPP TS 36.106
Uplink Noise Figure at Maximum
dB ≤5
Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Input RF Power at Master
dBm 30
Unit
Mechanical---MU
Chassis 178 x 482x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 12
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
Operating Temperature °C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Page 48 of 232
Specifications
Mechanical---HRU
20W
Dimensions, H x W x D mm 1270 x 236 x 236
Weight (approx.) kg 49
Page 49 of 232
ComFlex Series Distributed Antenna System
ComFlex-5000(CI) 20W40W
Features
Modularized Master Unit supports field upgrade and independent gain control.
RF module supports both simplex and duplex.
Compact slim Remote Unit for OPEX saving.
Full operation bandwidth system supports multi-operator application.
Supports all major technologies GSM, CDMA, WCDMA and LTE.
Comply with 3GPP.
Optical link auto gain control.
Web based GUI for intelligent commissioning and configuration.
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and high power Remote Unit (RU). The MU includes the Chassis,
Power Supply Unit (PSU), Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can
support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a compact
and slim form factor for easy installation; it is an integrated design which supports 3 independent bands,
1900MHz, AWS, and AWS MIMO.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba DAS offers service providers an optimal solution for multiple
applications from a single building to a campus, mega mall, or sports arena and beyond.
Page 50 of 232
Specifications
Optical
System 1900MHz, AWS, AWS
Optical Fiber Single Mode
Optical Wavelength nm 1310, 1550 + WDM
Electrical
1900MHz AWS AWS
Uplink Frequency Range 1850-1910 1710-1755 1710-1755
MHz
Downlink Frequency Range 1930-1990 2110-2155 2110-2155
Operating Bandwidth MHz 60 45 45
Uplink Output Power dBm -20 -20 -20
Downlink Output Power dBm 43/46 43/46 43/46
Mechanical---MU
Chassis 178 x 482x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 12
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
Operating Temperature °C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Page 51 of 232
Specifications
Mechanical---HRU
20W 40W
Dimensions, H x W x D mm 1270 x 236 x 236
Weight (appr.) kg 49
RF Connectors D-Female x 3
Page 52 of 232
ComFlex Series Distributed Antenna System
ComFlex-4300(CI) 40W
Features
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and High power Remote Unit (RU). The MU includes the
Chassis, Power Supply Unit (PSU), Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design,
it can support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a
compact and slim form factor for easy installation; it is an integrated design which supports 4
independent bands, 700MHz (lower ABC & upper C), 850MHz, 1900MHz and AWS band.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba Quad-Band DAS offers service providers an optimal solution for
multiple applications from a single building to a campus, mega mall, or sports arena and beyond.
Page 53 of 232
Specifications
Optical
System 700MHz, 850MHz, 1900MHz, AWS
Optical Fiber Single Mode
Optical Wavelength nm 1310, 1550 + WDM
Electrical
700MHz 850MHz 1900MHz AWS
Uplink Frequency Range 698-716/776-787 824-849 1850-1915 1710-1755
Downlink Frequency MHz
776-787 869-894 1930-1995 2110-2155
Range
Operating Bandwidth MHz 18/11 25 65 45
Uplink Output Power dBm -20 -20 -20 -20
Downlink Output Power dBm 46 46 46 46
Uplink Maximum gain dB 33
Downlink Maximum gain dB 36
ATT Adjustable Range(1dB
dB MU: 0-20, RU: 0-30
step)
Pass Band Ripple (p-p) dB ≤5 ≤5 ≤6 ≤5
Spurious emission 3GPP TS 36.106 FCC FCC FCC
Uplink Noise Figure at
dB ≤6
Maximum Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Input RF Power at
dBm 30
Master Unit
Mechanical---MU
Chassis 7” x 19” x 15.7” (178 x 482 x 400)
Fiber Optical Unit 1.5” x 7.3” x 11.8” (37 x 185 x 299)
Dimensions, H x W x D mm
per RF Unit 4.1” x 1.8” x 10.2” (103 x 46 x 259)
Power Supply Unit 5.5” x 2.5” x 15.7” (140 x 63 x 400)
Chassis 24.3 (11)
Fiber Optical Unit 4.4 (2)
Weight (approx.) kg
Per RF Unit 2.2 (1)
Page 54 of 232
Specifications
Mechanical Specifications--HRU
53.1” x 8.9” x 12.4”
Dimensions, H x W x D Remote Unit in(mm)
1350 x 225 x 315
Weight (approx.) Remote Unit lb(kg) 154.3(70)
AC110/220V VAC 100 – 240 / 47 – 63Hz
Power Supply VD
DC-48 -58 – -40
C
Power Consumption (approx.) W 1350
RF Connectors DIN – Female
Fiber Connectors SC/APC
Operating Temperature °C -40 – +70
Operating Humidity % ≤ 95
Ingress protection IP65
Enclosure Cooling Fan
Installation Type Wall / Pole
Ordering Information
Module Name P/N
Master Unit Chassis MU01-RACK-E01
Page 55 of 232
ComFlex Series Distributed Antenna System
ComFlex-4500(CI) 10W20W
Features
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and high power Remote Unit (RU). The MU includes the Chassis,
Power Supply Unit (PSU), Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can
support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a compact
and slim form factor for easy installation; it is an integrated design which supports 4 independent bands,
850MHz, 1800MHz, 2100MHz and 2600MHz.
This solution is an effective point-to-multipoint distributed antenna system that provides flexible and
scalable solution of multi-band, multi-operator coverage extension applications, such as citywide
enhancement, highway, canyons, campus, underground tunnels, airports, convention centres, etc.
Page 56 of 232
Specifications
Optical
System 850MHz, 180MHz, 2100MHz, 2600MHz
Optical Fiber Single Mode
Optical Wavelength nm 1310, 1550 + WDM
Electrical
850MHz 1800MHz 2100MHz 2600MHz
Uplink Frequency Range 824-849 1710-1785 1920-1980 2500-2570
Downlink Frequency MHz
869-894 1805-1880 2110-2170 2620-2690
Range
Operating Bandwidth MHz 25 75 60 70
Uplink Output Power dBm -20 -20 -20 -20
Downlink Output Power dBm 40/43 40/43 40/43 40/43
Uplink Maximum gain dB 32@10W, 33 @20W
Downlink Maximum gain dB 32@10W, 35 @20W
ATT Adjustable Range(1dB
dB MU: 0-40, RU: 0-30
step)
Pass Band Ripple (p-p) dB ≤5 ≤6 ≤6 ≤6
Spurious emission 3GPP TS 25.106 3GPP TS 36.106 3GPP TS 25.106 3GPP TS 36.106
Uplink Noise Figure at
dB ≤6
Maximum Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Input RF Power at
dBm 30
Master Unit
MTBF hr >100,000
Mechanical---MU
Chassis 178 x 482x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 11
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
Operating Temperature °C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Page 57 of 232
Specifications
Mechanical---RU
10W 20W
Dimensions, H x W x D mm 1350 x 315 x 225
Weight (approx.) kg 70
RF Connectors DIN-Female
Page 58 of 232
ComFlex Series Distributed Antenna System
ComFlex-4C00 (CI) 20W40W
Features
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and High power Remote Unit (RU). The MU includes the
Chassis, Power Supply Unit (PSU), Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design,
it can support up to8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a
compact and slim form factor for easy installation; it is an integrated design which supports 4
independent bands, 850MHz, 1900MHz, AWS and AWSMIMO band.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba DAS offers service providers an optimal solution for multiple
applications from a single building to a campus, mega mall, or sports arena and beyond.
Page 59 of 232
Specifications
Optical
System 850MHz, 1900MHz, AWS, AWS MIMO
Optical Fiber Single Mode
Optical Wavelength nm 1310, 1550 + WDM
Master Unit -4 to -2
Optical Output
Remote dBm
Power 3.0 to 5.0
Unit
Optical Return Loss dB >50
Max. Optical Loss dB 6.5
Optical Automatic Gain Control dB 6.5
Maximum Remote Unit per Master
4 (8 with FOU extension)
Unit
Electrical
850MHz 1900MHz AWS AWS
Uplink Frequency Range 824-849 1850-1910 1710-1755 1710-1755
Downlink Frequency MHz
869-894 1930-1990 2110-2155 2110-2155
Range
Operating Bandwidth MHz 25 60 45 45
Uplink Output Power dBm -20 -20 -20 -20
Downlink Output Power dBm 43/46 43/46 43/46 43/46
Uplink Maximum gain dB 33
Downlink Maximum gain dB 35@ 20W, 38@40W
ATT Adjustable
dB MU: 0-40, RU: 0-30
Range(1dB step)
Pass Band Ripple (p-p) dB ≤5 ≤6 ≤5 ≤5
Spurious emission 3GPP TS 25.106 3GPP TS 25.106 3GPP TS 25.106 3GPP TS 25.106
Uplink Noise Figure at
dB ≤6
Maximum Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max Downlink Input
dBm 30
Power
Mechanical---MU
Chassis 178 x 482x 360
Fiber Optical Unit 37 x185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 11
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
Operating Temperature °C 0 to 40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Page 60 of 232
Specifications
Mechanical---HRU
Dimensions, H x W x D mm 1350 x 225 x 315
Weight (approx.) kg 70
RF Connectors DIN-Female
Page 61 of 232
ComFlex Series Distributed Antenna System
ComFlex-4100(CI) 40W
Features
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and high power Remote Unit (RU). The MU includes the Chassis,
Power Supply Unit (PSU), Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can
support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a compact
and slim form factor for easy installation; it is an integrated design which supports 4 independent bands,
850MHz, 1800MHz, 2100MHz and 2600MHz.
This solution is an effective point-to-multipoint distributed antenna system that provides flexible and
scalable solution of multi-band, multi-operator coverage extension applications, such as citywide
enhancement, highway, canyons, campus, underground tunnels, airports, convention centres, etc.
Page 62 of 232
Specifications
Optical
System 900MHz, 1800MHz, 2100MHz, 2600MHz
Optical Fiber Single Mode
Optical Wavelength nm 1310, 1550 + WDM
Electrical
900MHz 1800MHz 2100MHz 2600MHz
Uplink Frequency Range 880-915 1710-1785 1920-1980 2500-2570
Downlink Frequency MHz
925-960 1805-1880 2110-2170 2620-2690
Range
Operating Bandwidth MHz 35 75 60 70
Uplink Output Power dBm -20 -20 -20 -20
Downlink Output Power dBm 46 46 46 43
Uplink Maximum gain dB 38
Downlink Maximum gain dB 38
ATT Adjustable
dB MU: 0-40, RU: 0-30
Range(1dB step)
Pass Band Ripple (p-p) dB ≤5 ≤6 ≤5 ≤5
Spurious emission 3GPP TS 25.106 3GPP TS 36.106 3GPP TS 25.106 3GPP TS 36.106
Uplink Noise Figure at
dB ≤6
Maximum Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Input RF Power at
dBm 30
Master Unit
Mechanical---MU
Chassis 178 x 482x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 360
Chassis 11
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
Operating Temperature °C 0 to+40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Page 63 of 232
Specifications
Mechanical---HRU
40W
Dimensions, H x W x D mm 1350 x 315 x 225
Weight (approx.) kg 70
RF Connectors DIN-Female
Page 64 of 232
ComFlex Series Distributed Antenna System
ComFlex CM 20W
Features
Modularized Master Unit and Remote Unit support field upgrade andindependent gain control.
RF module supports both simplex/duplex optional and adjusts gain for each module.
Full operation bandwidth system supports multi-operator application.
Supports all major technologies GSM, CDMA, WCDMA, LTE
Comply with 3GPP and supports LTEMIMO.
Optical link auto gain control.
Web based GUI for intelligent commissioning and configuration.
Supports FOU extension in Master Unit.
RU supports PSU/PA/optical backup (conditional) and white optional.
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and high power Remote Unit (RU). The MU includes the Chassis,
Power Supply Unit (PSU), Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can
support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a compact
form factor for easy installation, and its modular design is easy for upgrading and maintenance, which
supports up to 8 bands including MIMO frequency.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba DAS offers service providers an optimal solution for multiple
applications from a single building to a campus, mega mall, or sports arena and beyond.
Page 65 of 232
Specifications
Optical
System 700MHz, 850MHz, 900MHz, 1800MHz, 2100MHz,2300MHz,2600MHz
Electrical
700 850 900 1800 2100 2300 2600
MHz MHz* MHz* MHz MHz MHz MHz
Uplink Frequency 1710-178 1920-198 2300-240 2500-257
703-748 824-849 880-915
Range 5 0 0 0
MHz
Downlink 1805-188 2110-217 2300-240 2620-269
758-803 869-894 925-960
Frequency Range 0 0 0 0
Operating
MHz 45 25 35 75 60 100 70
Bandwidth
Uplink Output -30 -30 -30 -30 -30
dBm -30 -30
Power
Downlink Output 43 43 43 43 43
dBm 43 43
Power
Uplink Maximum
dB 30
gain
Downlink Maximum
dB 35
gain
ATT Adjustable
dB MU: 0-40, RU: 0-30
Range(1dB step)
Pass Band Ripple
dB ≤5 ≤5 ≤5 ≤6 ≤6 ≤6 ≤6
(p-p)
3GPP TS 3GPP TS
3GPP TS 3GPP TS 25.106 25.106 3GPP TS 3GPP TS 3GPP TS
Spurious emission
36.106 25.106 3GPP TS 3GPP TS 25.106 36.106 36.106
36.106 36.106
Uplink Noise Figure
dB ≤5
at Maximum Gain
se
System Delay ≤2
c
VSWR ≤ 1.5
Max Downlink Input
dBm 30
Power
* Note: 850MHz and 900MHz can’t be used together unless there is at least 5MHz frequency interval.
Page 66 of 232
Specifications
Mechanical---MU
Chassis 178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 12
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
RF Connectors N-Female
Mechanical---RU
CMU 528 x 298 x 251
CMU 25
Mounting Rack 8
RF Connectors N-Female
Page 67 of 232
ComFlex Series Distributed Antenna System
ComFlex CM 20W
Features
Modularized Master Unit and Remote Unit support field upgrade andindependent gain control.
RF module supports both simplex/duplex optional and adjusts gain for each module.
Full operation bandwidth system supports multi-operator application.
Supports all major technologies GSM, CDMA, WCDMA, LTE.
Comply with 3GPP and supports LTEMIMO.
Optical link auto gain control.
Web based GUI for intelligent commissioning and configuration.
Supports FOU extension in Master Unit.
RU supports PSU\PA\optical backup (conditional) and black optional.
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and high power Remote Unit (RU). The MU includes the Chassis,
Power Supply Unit (PSU), Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can
support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a compact
form factor for easy installation, and its modular design is easy for upgrading and maintenance, which
supports up to 8 bands including MIMO frequency.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba DAS offers service providers an optimal solution for multiple
applications from a single building to a campus, mega mall, or sports arena and beyond.
Page 68 of 232
Specifications
Optical
700MHz, 800MHz, 850MHz, 1800MHz, 1900MHz,
System
2100MHz,AWS,2600MHz
Optical Fiber Single Mode
Electrical
700 800 850 1800 1900 2100 2600
AWS**
MHz MHz* MHz* MHz** MHz** MHz** MHz
Uplink Frequency 1710-17 1850-19 1920-19 1710-175 2500-25
703-748 806-824 824-849
Range 85 10 80 5 70
MHz
Downlink 1805-18 1930-19 2110-21 2110-215 2620-26
758-803 851-869 869-894
Frequency Range 80 90 70 5 90
Operating
MHz 45 18 25 75 60 60 45 70
Bandwidth
Uplink Output -30 -30 -30 -30 -30 -30
dBm -30 -30
Power
Downlink Output
dBm 43 43 43 43 43 43 43 43
Power
Uplink Maximum
dB 30
gain
Downlink
dB 35
Maximum gain
ATT Adjustable
dB MU: 0-40, RU: 0-30
Range(1dB step)
Pass Band Ripple
dB ≤6 ≤5 ≤5 ≤6 ≤6 ≤6 ≤6 ≤6
(p-p)
3GPP
TS 3GPP TS
3GPP 3GPP 3GPP 3GPP 3GPP 3GPP
Spurious 25.106 25.106
TS TS TS TS TS TS
emission 3GPP 3GPP TS
36.106 25.106 25.106 36.106 25.106 36.106
TS 36.106
36.106
Uplink Noise
Figure at dB ≤5
Maximum Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max Downlink
dBm 30
Input Power
* Note: When 800MHz and 850MHz used together the gain will be 3dB decrease in 800MHz DL
and 850MHz UL, and 800MHz output power will be 40dBm and 850MHz NF will be 8dB.
** Note: 1800MHz, 1900MHz, 2100MHz and AWS band will not be used together due to
frequency interference. Suggest 1800+2100 and 1900+AWS band.
Page 69 of 232
Specifications
Mechanical---MU
Chassis 178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 12
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
RF Connectors N-Female
Mechanical---RU
CMU 528 x 298 x 251
CMU 25
Mounting Rack 8
RF Connectors N-Female
Page 70 of 232
ComFlex Series Distributed Antenna System
ComFlex-8A00 (CM) 20W
Features
Modularized Master Unit and Remote Unit support field upgrade andindependent gain control.
RF module supports both simplex/duplex optional and adjusts gain for each module.
Full operation bandwidth system supports multi-operator application.
Supports all major technologies GSM, CDMA, WCDMA, and LTE.
Comply with 3GPP and supports LTEMIMO.
Optical link auto gain control.
Web based GUI for intelligent commissioning and configuration.
Supports FOU extension in Master Unit.
RU supports PSU/PA/optical backup (conditional) and black optional.
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and high power Remote Unit (RU). The MU includes the Chassis,
Power Supply Unit (PSU), Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can
support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a compact
form factor for easy installation, and its modular design is easy for upgrading and maintenance, which
supports up to 8 bands including MIMO frequency.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba DAS offers service providers an optimal solution for multiple
applications from a single building to a campus, mega mall, or sports arena and beyond.
Page 71 of 232
Specifications
Optical
800MHz, 800MIMO, 900MHz, 1800MHz, 1800MIMO, 2100MHz,
System
2600MHz, 2600MIMO
Optical Fiber Single Mode
Electrical
800 800 900 1800 1800 2100M 2600M 2600
MHz MIMO MHz MHz MIMO Hz Hz MIMO
Uplink Frequency 1710-17 1710-17 1920-19 2500-25 2500-25
832-862 832-862 880-915
Range 85 85 80 70 70
Downlink MHz
1805-18 1805-18 2110-21 2620-26 2620-26
Frequency 791-821 791-821 925-960
80 80 70 90 90
Range
Operating 35 75 75 60
MHz 30 30 70 70
Bandwidth
Downlink Output 43 43 43 43 43 43
dBm 43 43
Power
Uplink Maximum
dB 30
gain
Downlink
dB 35
Maximum gain
ATT Adjustable
dB MU: 0-40, RU: 0-30
Range(1dB step)
Pass Band Ripple
dB ≤5 ≤5 ≤5 ≤6 ≤6 ≤6 ≤6 ≤6
(p-p)
3GPP 3GPP
3GPP TS 25.106
Spurious emission 3GPP TS 36.106 TS TS 3GPP TS 36.106
3GPP TS 36.106
25.106 25.106
Uplink Noise
Figure at Maximum dB ≤5
Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Downlink
dBm 30
Input Power
Page 72 of 232
Mechanical---MU
Chassis 178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Dimensions, H x W x D mm
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Chassis 12
Fiber Optical Unit 2
Weight (approx.) kg
Per RF Unit 1
Power Supply Unit 2.5
RF Connectors N-Female
Specifications
Mechanical---RU
Total Dimension 602 x 300 x 873
Total Weight 93
CMU 25
Weight (approx.) kg
RF Unit 15x 4
Mounting Rack 8
Page 73 of 232
ComFlex Series Distributed Antenna System
ComFlex-8B00 (CM) 20W
Features
Modularized Master Unit and Remote Unit support field upgrade and
Independentgain control.
RF module supports both simplex and duplex in MU.
Full operation bandwidth system supports multi-operator application.
Supports all major technologies GSM, WCDMA and LTE.
Comply with 3GPP.
Optical link auto gain control.
Web based GUI for intelligent commissioning and configuration.
Supports FOU expansion in Master Unit.
GSM 1800 & UMTS 2100 support PA backup.
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and medium power Remote Unit (RU). The MU includes the
Chassis, Power Supply Unit (PSU), Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design,
it can support up to 8 independent RF inputs and 2 Remote Units (or 4 Remote Units with FOU
extension). The Remote Unit is designed with a compact form factor for easy installation, and itsmodular
design is easy for upgrading and maintenance which supports 8 independent bands, 1800MHz,
1800MIMO, 2100MHz, 2100MIMO, 2300MHz, 2300MIMO, 2600MHz and 2600MIMO.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba DAS offers service providers an optimal solution for multiple
applications from a single building to a campus, mega mall, or sports arena and beyond.
Page 74 of 232
Specifications
Optical Specifications
1800MHz, 1800MIMO, 2100MHz, 2100MIMO, 2300MHz, 2300MIMO,
System
2600MHz, 2600MIMO
Optical Fiber Single Mode
Optical Wavelength nm 1310, 1550 + WDM
Electrical Specifications--MU+RU A
2100MHz 2100MIM 2300MH 2300MIM 2600MIM
2600MHz
O z O O
Uplink 1920-1980 1920-1980 2300-2390 2300-2390 2500-2570 2500-2570
Frequency MHz
Range Downlin
2110-2170 2110-2170 2300-2390 2300-2390 2620-2690 2620-2690
k
Operating Bandwidth MHz 60 60 90 90 70 70
Uplink Output Power dBm -30 -30 -30 -30 -30 -30
Downlink Output 43 43 43 43
dBm 43 43
Power
Uplink Maximum gain dB 30
Downlink Maximum
dB 35
gain
ATT Adjustable Range
dB MU: 0-40, RU: 0-30
(1dB step)
Pass Band Ripple
dB ≤5 ≤5 ≤6 ≤6 ≤6 ≤6
(p-p)
3GPP TS 25.106
Spurious emission 3GPP TS 36.106 3GPP TS 36.106
3GPP TS 36.106
Uplink Noise Figure at
dB ≤5
Maximum Gain
se
System Delay ≤2
c
VSWR ≤ 1.5
Max. Downlink Input
dBm 30
Power
Electrical Specifications--MU+RU B
1800MHz 1800MIMO
Uplink 1710-1785 1710-1785
Frequency Range MHz
Downlink 1805-1880 1805-1880
Operating Bandwidth MHz 75 75
Uplink Output Power dBm -30 -30
Downlink Output Power dBm 43 43
Page 75 of 232
Specifications
Mechanical Specifications--MU
Chassis 178 x 482 x 360
Chassis 12
Fiber Optical Unit 2
Weight (approx.) kg
RF Unit 1
Power Supply Unit 2.5
RF Connectors N-Female
Mechanical Specifications--RU A
Combine and Monitor
Dimensions 528 x 298 x 251
Unit mm
H x W x D (approx.)
RF Unit 528 x 290 x 152
Combine and Monitor
30
Weight (approx.) Unit kg
RF Unit 20
RF Connectors N-Female
Page 76 of 232
Mechanical Specifications--RU B
Combine and Monitor
528 x 298 x 251
Unit mm
Dimensions
H x W x D (approx.) RF Unit 528 x 290 x 152
Switch Unit 15
RF Connectors N-Female
Page 77 of 232
ComFlex Series Distributed Antenna System
ComFlex-8C00 (CM) 20W
Features
Modularized Master Unit and Remote Unit support field upgrade and independent
gain control.
RF module supports both simplex/duplex optional and adjusts gain for each module.
Full operation bandwidth system supports multi-operator application.
Supports all major technologies GSM, CDMA, WCDMA and LTE.
Comply with 3GPP and supports LTEMIMO.
Optical link auto gain control.
Web based GUI forintelligent commissioning and configuration.
Supports FOU extension in Master Unit.
RU supports PSU/PA/optical backup (conditional) and grey optional.
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and high power Remote Unit (RU). The MU includes the Chassis,
Power Supply Unit (PSU), Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design, it can
support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a compact
form factor for easy installation, and its modular design is easy for upgrading and maintenance which
supports 8 independent bands, 900MHz, 1800MHz, 2100MHz, 2600MHz, 900MIMO, 1800MIMO,
2100MIMO and 2600MIMO.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba DAS offers service providers an optimal solution for multiple
applications from a single building to a campus, mega mall, or sports arena and beyond.
Page 78 of 232
Specifications
Optical
900MHz, 900MIMO, 1800MHz, 1800MIMO,
System
2100MHz,2100MIMO,2600MHz, 2600MIMO
Optical Fiber Single Mode
Electrical
900 900 1800 1800 2100 2100 2600 2600
MHz MIMO MHz MIMO MHz MIMO MHz MIMO
1710- 1710- 1920- 1920- 2500- 2500-
Frequen Uplink 832-862 832-862
1785 1785 1980 1980 2570 2570
cy MHz
Downlin 1805-18 1805-18 2110-21 2110-21 2620-26 2620-26
Range 791-821 791-821
k 80 80 70 70 90 90
Operating
MHz 30 30 75 75 60 60 70 70
Bandwidth
Uplink Output Power dBm -30 -30 -30 -30 -30 -30 -30 -30
Downlink Output 43 43 43 43 43
dBm 43 43 43
Power
Uplink Maximum
dB 30
gain
Downlink Maximum
dB 35
gain
ATT Adjustable
dB MU: 0-40, RU: 0-30
Range(1dB step)
Pass Band Ripple
dB ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
(p-p)
3GPP TS 25.106
Spurious emission 3GPP TS 36.106 3GPP TS 25.106 3GPP TS 36.106
3GPP TS 36.106
Uplink Noise Figure
dB ≤5
at Maximum Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max .Downlink Input
dBm 30
Power
Page 79 of 232
Specifications
Mechanical Specifications---MU
Total Dimension 178 x 482 x 480
Total Weight 29
Chassis 12
Weight (approx.) Fiber Optical Unit kg 2x2
RF Unit 1x8
Power Supply Unit 2.5x2
RF Connectors N-Female
Mechanical Specifications---RU
Total Dimension 602 x 300 x 873
Total Weight 95
CMU 27
Weight (approx.) kg
RF Unit 15 x4
Mounting Rack 8
RF Connectors N-Female
Page 80 of 232
ComFlex Series Distributed Antenna System
ComFlex-5M00(AI) 10W20W
Features
Product Description
The ComFlex series Distributed Antenna System is an RF over fibre solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Active Conditioning Unit (ACU), Optical control Unit (OCU), Combiner and Remote
Unit (RU). The ACU includes the Chassis, Power Supply Unit (PSU) and RF Unit (RFU). With a modular
design, it can support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed
with a compact and slim form factor for easy installation; it is an integrated design which supports 3
independent bands.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba DAS offers service providers an optimal solution for multiple
applications from a single building to a campus, mega mall, or sports arena and beyond.
Page 81 of 232
Specifications
Optical
System 1900MHz, AWS, 2600MHz
Electrical
1900MHz AWS 2600
Frequency Uplink 1850-1910 1710-1755 2500-2570
MHz
Range Downlink 1930-1990 2110-2155 2620-2690
Operating Bandwidth MHz 65 45 70
Downlink Output Power dBm 43 43 43
Mechanical---ACU
Dimensions, H x W x D mm 220 x 482.5 x 450
VAC 100-240
Power Supply
VDC -48
Page 82 of 232
Specifications
Mechanical---Combiner
Dimensions, H x W x D mm 44 x 485x 450
Weight (approx.) kg 8
Mechanical---OCU
Dimensions, H x W x D mm 44 x 485x 450
Mechanical Specifications---RU
10W 20W
Dimensions, H x W x D mm 1270 x 236 x 200
Weight (approx.) kg 49
Page 83 of 232
ComFlex Series Distributed Antenna System
ComFlex AM
Features
Product Description
The ComFlex series Distributed Antenna System is an RF over fibre solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Active Conditioning Unit (ACU), Optical control Unit (OCU), Combiner and Remote
Unit (RU). The ACU includes the Chassis, Power Supply Unit (PSU) and RF Unit (RFU). With a modular
design, it can support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed
with a compact form factor for easy installation, and its modular design is easy for upgrading and
maintenance, supports up to 8 bands including MIMO frequency.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba DAS offers service providers an optimal solution for multiple
applications from a single building to a campus, mega mall, or sports arena and beyond.
Page 84 of 232
Specifications
Optical
700MHz, 800MHz, 850MHz, 900MHz, 1800MHz, EAWS, 1900MHz,
System
2100MHz, 2600MHz and MIMO (max. 8 bands)
Optical Fiber Single Mode
Electrical
700MHz 700APAC 800MHz 850MHz 900MHz 1800MHz
Uplink Frequency 698-716/
703-748 806-824 824-849 880-915 1710-1785
Range 776-787
MHz
Downlink Frequency 728-746/
758-803 851-869 869-894 925-960 1805-1880
Range 746-757
Operating Bandwidth MHz 18/11 45 18 25 35 75
Downlink Output
dBm 43 43 43 43 43 43
Power
Uplink Maximum gain dB -3 -3 -3 -3 -3 -3
Downlink Maximum
gain dB -3 -3 -3 -3 -3 -3
(@ 46dBm input)
ATT Adjustable Range
dB ACU: 0-70, RU: 0-30
(1dB step)
Pass Band Ripple (p-p) dB ≤5 ≤6 ≤5 ≤5 ≤5 ≤6
3GPP TS
3GPP TS 3GPP TS 3GPP TS 3GPP TS 3GPP TS 25.106
Spurious emission
36.106 36.106 36.106 25.106 36.106 3GPP TS
36.106
Uplink Noise Figure at
dB ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
Maximum Gain
se
System Delay ≤2
c
VSWR ≤ 1.5
Max. Downlink Input
dBm 50
Power per RFU of ACU
Page 85 of 232
Electrical
EAWS 1900MHz 2100MHz 2600MHz
Uplink Frequency 1710-1780 1850-1915 1920-1980 2500-257
Range
MHz
Downlink Frequency
2110-2180 1930-1995 2110-2170 2620-2690
Range
Operating Bandwidth MHz 70 65 60 70
Downlink Output Power dBm 43 43 43 43
Uplink Maximum gain dB -3 -3 -3 -3
Downlink Maximum
gain dB -3 -3 -3 -3
(@ 46dBm input)
ATT Adjustable Range
dB ACU: 0-70, RU: 0-30
(1dB step)
Pass Band Ripple (p-p) dB ≤6 ≤6 ≤6 ≤6
3GPP TS 25.106
Spurious emission 3GPP TS 25.106 3GPP TS 25.106 3GPP TS 36.106
3GPP TS 36.106
Uplink Noise Figure at
dB ≤5 ≤5 ≤5 ≤5
Maximum Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Downlink Input
Power per RFU of dBm 50
ACU
Specifications
Mechanical---ACU
Dimensions, H x W x D mm 220 x 482.5 x 450
Rack 15.5
MCU 1.5
VAC 100-240/50-60Hz
Power Supply
VDC -48/47-63Hz
Mechanical---Combiner
Dimensions, H x W x D mm 44 x 485x 450
Page 86 of 232
Mechanical---OCU
Dimensions, H x W x D mm 44 x 485x 450
Rack 5
Weight (approx.) kg
Per FOU 2 (max. support 2FOUs)
Mechanical---RU
CMU 528 x 251 x 298
Dimensions, H x W x D Per RF Unit mm 528 x 152 x 290(max. support 4 RF units)
Mounting Rack 602 x 820 x 30
CMU 30
Weight (approx.) Per RF Unit kg 20 (max. support 4 RF units)
Mounting Rack 8
Page 87 of 232
ComFlex Series Distributed Antenna System
ComFlex-5900(AM) 20W
Features
Product Description
The ComFlex series Distributed Antenna System is an RF over fibre solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Active Conditioning Unit (ACU), Optical control Unit (OCU), Combiner and Remote
Unit (RU). The ACU includes the Chassis, Power Supply Unit (PSU) and RF Unit (RFU). With a modular
design, it can support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed
with a compact form factor for easy installation, and its modular design is easy for upgrading and
maintenance which supports 3 independent bands, 850MIHz, 1900MHz and AWS.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba DAS offers service providers an optimal solution for multiple
applications from a single building to a campus, mega mall, or sports arena and beyond.
Page 88 of 232
Specifications
Optical
System 850MHz, 1900MHz, AWS
Electrical
850MHz 1900MHz AWS
Frequency Uplink 824-849 1850-1910 1710-1755
MHz
Range Downlink 869-894 1930-1990 2110-2155
Operating Bandwidth MHz 25 60 45
Downlink Output Power dBm 43 43 43
Mechanical---ACU
Dimensions, H x W x D mm 220 x 482.5 x 450
VAC 100-240
Power Supply
VDC -48
Page 89 of 232
Specifications
Mechanical---Combiner
Dimensions, H x W x D mm 44 x 485x 450
Weight (approx.) kg 8
Mechanical---OCU
Dimensions, H x W x D mm 44 x 485x 450
Mechanical---RU
CMU 528 x 251 x 298
Dimensions, H x W x D RF Unit mm 528 x 152 x 290*2
CMU 30
Weight (approx.) RF Unit kg 20*2
Mounting Rack 8
Page 90 of 232
ComFlex Series Distributed Antenna System
ComFlex-4100(AM) 20W
Features
Product Description
The ComFlex series Distributed Antenna System is an RF over fibre solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Active Conditioning Unit (ACU), Optical control Unit (OCU), Combiner and Remote
Unit (RU). The ACU includes the Chassis, Power Supply Unit (PSU) and RF Unit (RFU). With a modular
design, it can support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed
with a compact form factor for easy installation, and its modular design is easy for upgrading and
maintenance.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba DAS offers service providers an optimal solution for multiple
applications from a single building to a campus, mega mall, or sports arena and beyond.
Page 91 of 232
Specifications
Optical
System 900MHz, 1800MHz, 2100MHz, 2600MHz
Electrical
900MHz 1800MHz 2100MHz 2600MHz
Uplink Frequency Range 880-915 1710-1785 1920-1980 2500-2570
Downlink Frequency MHz
925-960 1805-1880 2110-2170 2620-2690
Range
Operating Bandwidth MHz 35 75 60 70
Downlink Output Power dBm 43 43 43 43
Mechanical---ACU
Dimensions, H x W x D mm 220 x 482.5 x 450
VAC 100-240
Power Supply
VDC -48
Page 92 of 232
Specifications
Mechanical---Combiner
Dimensions, H x W x D mm 44 x 485x 450
Weight (approx.) kg 8
Mechanical---OCU
Dimensions, H x W x D mm 44 x 485x 450
Mechanical---RU
Total Dimension 602 x 555 x 300
Total Weight 63
CMU 25
Weight (approx.) kg
RF Unit 15 *2
Mounting Rack 8
Page 93 of 232
ComFlex Series Distributed Antenna System
ComFlex-8A00 (AM) 20W
Features
ProductDescription
The ComFlex series Distributed Antenna System is an RF over fibre solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Active Conditioning Unit (ACU), Optical control Unit (OCU), Combiner and Remote
Unit (RU). The ACU includes the Chassis, Power Supply Unit (PSU) and RF Unit (RFU). With a modular
design, it can support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed
with a compact form factor for easy installation, and its modular design is easy for upgrading and
maintenance.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba DAS offers service providers an optimal solution for multiple
applications from a single building to a campus, mega mall, or sports arena and beyond.
FunctionalBlock Diagram
Page 94 of 232
Specifications
Optical
800MHz, 800MIMO, 900MHz, 1800MHz, 1800MIMO, 2100MHz,
System
2600MHz, 2600MIMO
Optical Fiber Single Mode
Optical Wavelength nm 1310, 1550 + WDM
Electrical
800 800 900 1800 1800 2100M 2600M 2600
MHz MIMO MHz MHz MIMO Hz Hz MIMO
Uplink Frequency 1710-17 1710-17 1920-19 2500-25 2500-25
832-862 832-862 880-915
Range 85 85 80 70 70
Downlink MHz
1805-18 1805-18 2110-21 2620-26 2620-26
Frequency 791-821 791-821 925-960
80 80 70 90 90
Range
Operating 35 75 75 60
MHz 30 30 70 70
Bandwidth
Downlink Output 43 43 43 43 43 43
dBm 43 43
Power
Uplink Maximum -3
dB
gain
Downlink
Maximum gain dB -3
(@46dBm input)
ATT Adjustable
dB ACU: 0-70, RU: 0-30
Range(1dB step)
Pass Band Ripple
dB ≤5 ≤5 ≤5 ≤6 ≤6 ≤6 ≤6 ≤6
(p-p)
3GPP 3GPP
3GPP TS 25.106
Spurious emission 3GPP TS 36.106 TS TS 3GPP TS 36.106
3GPP TS 36.106
25.106 25.106
Uplink Noise
Figure at Maximum dB ≤5
Gain
System Delay sec ≤2
VSWR ≤ 1.5
Max. Downlink
Input Power per dBm 50
RFU of ACU
Mechanical---ACU
Dimensions, H x W x D mm 220 x 482.5 x 450
Weight (approx.) kg 50(with 8 RFUs)
VAC 100-240
Power Supply
VDC -48
Power Consumption (approx.) W 180 (with 8 RFUs)
RF Connectors Input: Din, duplex; Output: QMA, simplex
Operating Temperature °C 0 to +45
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Fan
Installation Type 19” Rack
Page 95 of 232
Specifications
Mechanical---Combiner
Dimensions, H x W x D mm 44 x 485x 450
Weight (approx.) kg 8
Mechanical---OCU
Dimensions, H x W x D mm 44 x 485x 450
Mechanical---RU
Total Dimension 602 x 300 x 873
Total Weight 93
CMU 25
Weight (approx.) kg
RF Unit 15 *4
Mounting Rack 8
Page 96 of 232
RX Series Digital Band
Selective Repeater
Page 97 of 232
RX Series Digital Band Selective Repeater
Features
FunctionalBlock Diagram
Operation andMaintenance
Page 98 of 232
Outline Drawing
300 164
RUN
ALM
MODEM
430
AC 100V-240V
50/60Hz AC OUT
RS-485 EXT_ALM MODEM ANT
DT MT
Page 99 of 232
LTE700Digital Band Selective Repeater
RX-0739
Specifications
Electrical 5W 10W
Frequency Range, Uplink MHz 718-748
Number of Sub-bands 4
Total Output Power, Uplink dBm 23
ACRR
EVM
Compliance with3GPP 36.106
Out of Band Spectrum Emissions
Mechanical
Dimensions, H x W x D mm 430 x 300 x 164
Weight(approx.) kg 18
Power Supply VAC 100-240/47-63Hz
Mechanical
Dimensions, H x W x D mm/in 430x300x164/16.9x11.8x6.5
RF Connectors N-Female
Mechanical
Dimensions, H x W x D mm 430 x 300 x 164
Weight (approx.) kg 18
RF Connectors N-Female
ACRR
EVM Compliance with 3GPP TS 36.106
PCDE
Inter modulation
Absolute Maximum RF Input Power dBm -10
Mechanical
Dimensions, H x W x D mm 430 x 300 x 164
Weight(approx.) kg 18
RF Connectors N-Female
MTBF hr ≥ 50,000
Number of Sub-bands 4
Mechanical
mm/
Dimensions, H x W x D 430 x 300 x 164/16.9 x 11.8 x 6.5
in
Weight(approx.) kg/lb 18/39.7
Power Supply VAC 100-240/47-63Hz
Mechanical
Dimensions, H x W x D mm 430 x 300 x 164
Weight(approx.) kg 18
RF Connectors N-Female
MTBF hr ≥ 50,000
EVM
Compliance with 3GPP TS 36.106
Out of Band Spectrum Emissions
Mechanical
Dimensions, H x W x D mm 330 x 420 x 182
Weight (approx.) kg 25
MTBF hr ≥ 50,000
Note: Typical specifications at room temperature
PCDE
Inter modulation
Impedance 50
Mechanical
Dimensions, H x W x D mm 430 x 300 x 164
Weight(approx.) kg 18
RF Connectors N-Female
MTBF* hr ≥100,000
FunctionalBlock Diagram
Outline Drawing
440 355
408
Dual band
645
433
Number of Sub-bands 2
Total Output Power, Uplink dBm 33
Specifications-1900MHz
Electrical 5W 10W
Frequency Range, Uplink MHz 1850-1910
Frequency Range, Downlink MHz 1930-1990
Number of Sub-bands 4
Total Output Power, Uplink dBm 30
RF Connectors N-Female
MTBF hr ≥ 50,000
Number of Sub-bands 4
Total Output Power, Uplink dBm 27
Specifications-1800MHz
Electrical 5W 10W
Frequency Range, Uplink MHz 1710-1785
Frequency Range, Downlink MHz 1805-1880
Operating Bandwidth Per Sub-band MHz 0.2-25
Number of Sub-bands 4
Total Output Power, Uplink dBm 30
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain Adjustment Range (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB 5
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Spurious Emission Mask
EVM Compliance with ETSI EN 301 908-15*
Out of Band Gain
Weight (approx.) kg 45
RF Connectors N-Female
MTBF hr ≥ 50,000
Number of Sub-bands 4
Total Output Power, Uplink dBm 27
Specifications-2100MHz
Electrical 5W 10W
Frequency Range, Uplink MHz 1920-1980
Frequency Range, Downlink MHz 2110-2170
Number of Sub-bands 4
Instantaneous Bandwidth MHz 30
Weight (approx.) kg 45
RF Connectors N-Female
MTBF hr ≥ 50,000
Number of Sub-bands 4
Total Output Power, Uplink dBm 30
Weight (approx.) kg 45
RF Connectors N-Female
MTBF hr ≥ 50,000
Number of Sub-bands 4
Total Output Power, Uplink dBm 27
Specifications-1800MHz
Electrical 5W 10W
Frequency Range, Uplink MHz 1710-1785
Frequency Range, Downlink MHz 1805-1880
Operating Bandwidth Per Sub-band MHz 0.2-25
Number of Sub-bands 4
Total Output Power, Uplink dBm 30
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain Adjustment Range (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB 5
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Spurious Emission Mask
EVM Compliance with ETSI EN 301 908-15*
Out of Band Gain
Number of Sub-bands 4
Instantaneous Bandwidth MHz 30
Specifications
Mechanical 5W 10W
Dimensions, H x W x D mm 440×408×355
Weight (approx.) kg 45
Equipment N-Female
RF Connectors
Combiner (Option) Din-Female
MTBF hr ≥ 50,000
PCDE
Inter modulation
Weight(approx.) kg 18
VAC 100-240/47-63Hz
Power Supply
VDC -68 to -38
RF Connectors N-Female
MTBF hr ≥ 50,000
PCDE
Inter modulation
Absolute Maximum RF Input
dBm -10
Power
Input VSWR 1.5
Impedance 50
Mechanical
Weight(approx.) kg 18
RF Connectors N-Female
MTBF hr ≥ 50,000
Mechanical
Dimensions, W x H x D mm/in 361x222x 93/14.2x8.7x3.7
RF Connectors N-Female
MTBF hr >50,000
Weight(approx.) kg 18
RF Connectors N-Female
MTBF hr ≥ 50,000
Outline Drawing
300 164
RUN
ALM
MODEM
430
AC 100V-240V
50/60Hz AC OUT
RS-485 EXT_ALM MODEM ANT
DT MT
FunctionalBlock Diagram
Up to 12 GSM Channels
Digitalized Antenna Feedback Cancellation (AFC) function to reduce
The antenna isolation requirement up to 30dB.
Dynamic Uplink Noise Control (UNC) function to reduce Uplink Interference by
Automatically switch off the corresponding carriers when no traffic.
5W/10W Downlink Output Power utilizing ultra Linear PA, supports GSM, GPRS and EDGE.
Integrated wireless modem for remote configuration, monitoring and control.
Internal backup battery keeps the alarm unit running for up to two hours after power failure.
Compatible to Comba generic OMT and CMS platform.
Designed for all weather outdoor installation – waterproof, damp-proof and omni-sealed (IP65).
FunctionalBlock Diagram
at ±1MHz dB > 60
In Band Spurious 890-915 /935-960MHz dBc -60
9KHz to 1GHz dBm -36
Out of Band Spurious
1GHz to 12.75GHz dBm -30
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Mechanical
Dimensions, H x W x D mm 420 x 330 x 182
Weight (approx.) kg 25
VAC 100-240/47-63Hz
Power Supply
VDC -68 to -38
RF Connectors N-Female
MTBF hr ≥ 50,000
Outline Drawing
420
330
182
227
ACRR
EVM Compliance with 3GPP TS 36.106
PCDE
Inter modulation
Absolute Maximum RF Input Power dBm -10
Mechanical
Dimensions, H x W x D mm 430 x 300 x 164
Weight(approx.) kg 18
RF Connectors N-Female
MTBF hr ≥ 50,000
Number of Sub-bands 4
Total Output Power, Uplink dBm 30
Mechanical
Dimensions, H x W x D mm 430 x 300 x 164
Weight(approx.) kg 18
RF Connectors N-Female
Operating Temperature C -33 to +55
Specifications
Electrical 700MHz 800MHz
US: 788-805, CA:
Frequency Range, Uplink MHz 806-824
798-806
US: 758-775, CA:
Frequency Range, Downlink MHz 851-869
768-776
12.5/25/75+10MHz (LTE,
Channel Bandwidth KHz 12.5/25/75
US)
Number of Channels US: 32+1 (LTE), CA: 32 32
Specifications
Mechanical
in(mm
Dimensions, H x W x D 20.9 x 15.4 x 8.3 (530 x 390 x 210)
)
Weight(without bracket) lb(kg) 50.7 (23)
VAC 100-240/47-63Hz
Power Supply
VDC -40 to -58
Single band W 80
Power Consumption
Dual band W 100
RF Connectors N-Female
OutlineDrawing
AC 100V-240V MT_TEST
50Hz/60Hz PWR
DT RUN MT OMT
DT_TEST ALM
Class A (Canada)
License
Specifications
Electrical 700MHz 800MHz
US: 788-805, CA:
Frequency Range, Uplink MHz US:806-817, CA:806-824
798-806
US: 758-775, CA:
Frequency Range, Downlink MHz US:851-862, CA:806-824
768-776
Operating Bandwidth MHz 0.2-10 0.2-10
VAC 100-240/47-63Hz
Power Supply
VDC -40 to -58
Single band W 80
Power Consumption
Dual band W 100
RF Connectors N-Female
Operating Temperature o
F(°C) -27 to +140 (-33 to +60)
Outline Drawing
AC 100V-240V MT_TEST
50Hz/60Hz PWR
DT RUN MT OMT
DT_TEST ALM
Class B (Canada)
License
Specifications
Electrical
Frequency Range MHz 450 - 512
Total Output Power, Uplink dBm 27
Total Output Power, Downlink dBm 36 (TX/RX separate without Filter)
Single Window 2MHz @450-470MHz
Single Window 1MHz @470-512MHz
Dual Window 2MHz + 2MHz @450-470MHz
RF Windows (internal) Dual Window 1MHz + 1MHz @470-512MHz
Dual Window 2MHz@450-470MHz + 1MHz
@470-512MHz
*Note
Maximum System Gain dB 95
Gain Adjustment Range (1dB step) dB 0-30
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 7
Intermodulation dBm -13
Spurious dBm FCC Compliance
Maximum RF Input Level without Damage dBm 0
Maximum RF Input Level without Overdrive -10
Input VSWR 1.5
Impedance 50
*Note: Consult for passband and window configurations other than listed above
Mechanical
in(mm
Dimensions, H x W x D 31.5x15.4x12.4 (800×390×315)
)
Weight(without bracket) lb(kg) 77 (35)
VDC -40 to -58
Power Supply
VAC 120
Power Consumption W 85
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature o
F(oC) -27 to +140 (-33 to +60)
Operating Humidity 95%
Environmental Class NEMA 4
Note: Typical specifications at room temperature
Part Numbers
RX4122-XXYYZZFF
XX YY ZZ FF
Unit Class and Filter Power Level (TX/RX Power Supply: Filter Options:
Numbers: separate):
AC – AC powered Various due to different
32 – Class A 32 filters 36 – 36dBm DC – DC Powered filter model
B4 – Class B 4 filters
Outline Drawing
315
390 270
800
Master Unit
Remote Unit
…
…
Master Unit Up to 8
Remote Unit
Electrical (Class A)
700MHz 800MHz
Uplink 799-805 806-824
Frequency Range MHz
Downlink 769-775 851-869
Channel Bandwidth 12.5/25/75KHz 12.5/25/75KHz
Number of Filters 32 32
Total Output Power, Uplink dBm 27
Total Output Power, Downlink 33 33
Maximum System gain dB 95
Gain Adjustment Range (1dB step) dB MU: 0-30, RU: 0-30
Pass Band Ripple (p-p) dB ≤3 ≤3
Spurious emission FCC Compliance FCC Compliance
Inter modulation dBm -13 -13
Uplink Noise Figure at Maximum Gain dB ≤5
System Delay sec 17-37
Max UL Input w/o Overdrive dBm -30
Max UL Input w/o Damage dBm -10
Input VSWR 1.5
Impedance 50
Electrical (Class B)
700MHz 800MHz
Uplink 788-805 806-817
Frequency Range MHz
Downlink 758-775 851-862
Channel Bandwidth 200KHz - 10MHz 200KHz - 10MHz
Number of Filters 3 3
Total Output Power, Uplink dBm 27
Total Output Power, Downlink 33 33
Maximum System gain dB 95
Gain Adjustment Range (1dB step) dB MU: 0-30, RU: 0-30
Pass Band Ripple (p-p) dB ≤3 ≤3
Spurious emission FCC Compliance FCC Compliance
Inter modulation dBm -13 -13
Uplink Noise Figure at Maximum Gain dB ≤5
System Delay sec 8.5
Max UL Input w/o Overdrive dBm -30
Max UL Input w/o Damage dBm -10
Input VSWR 1.5
Impedance 50
Mechanical –RU
Dimensions, H x W x D in(mm) 22.4 x 15.4 x 8.5 (570 x 390 x 215)
Weight without Bracket lb(kg) 66 (30)
Power Supply VDC -40 to -58
Power Consumption (approx.) W 100
RF Connectors N-Female, duplex
Fiber Connectors SC/APC
Operating Temperature °C
-40 to +55
Operating Humidity ≤ 95%
Ingress protection NEMA 4X
Enclosure Cooling Convection
MTBF 100,000 @ 77 oF
Note: Typical specifications at room temperature
Part Numbers
Product Type Part Number
Class A
Class B
Mechanical
Dimensions, W x H x D mm 350 x 220 x 100
Weight (approx.) kg 7
RF Connectors N-Female
Mechanical
Dimensions, W x H x D mm/in 361x222x 93/14.2x8.7x3.7
RF Connectors N-Female
MTBF hr >50,000
Note: Typical specification at room temperature;
*: GSM Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz.
Mechanical
Dimensions, W x H x D mm/in 361x222x93/14.2x8.7x3.7
RF Connectors N-Female
MTBF hr >50,000
Note: Typical specification at room temperature;
*: GSM Max. Bandwidth 25MHz, LTE Max. Bandwidth 20MHz.
Mechanical
Dimensions, W x H x D mm/in 361 x 222 x 93/14.2 x 8.7 x 3.7
RF Connectors N-Female
MTBF hr >50,000
Note: Typical specification at room temperature;
*: GSM/CDMA Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
Mechanical
Dimensions, W x H x D mm/in 361 x 222 x 93/14.2 x 8.7 x 3.7
RF Connectors N-Female
MTBF hr >50,000
Note: Typical specification at room temperature;
*: WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
Mechanical
Dimensions, W x H x D mm/in 361 x 222 x 93/14.2 x 8.7 x 3.7
RF Connectors N-Female
MTBF hr >50,000
Note: Typical specification at room temperature;
*: WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
Mechanical
Dimensions, W x H x D mm/in 361 x 222 x 93/14.2 x 8.7 x 3.7
RF Connectors N-Female
MTBF hr >50,000
Specifications-model 1
Electrical Band1 Band2
Operating Frequency (MHz) 806-960 1710-2170
Mechanical
Dimensions, H x W x D (mm) 210 x 338 x 71
Weight (approx.) (kg) 4.6
RF Connectors N-Female
Operating Temperature (C) -33 to +55
Operating Humidity 95%
Environmental Class IP65
Outline Drawing
102
338
71
210
Combiner
Master Unit
Slave Unit
Combiner
Product Description
mBDA is a wireless enhanced solution where high-quality voice or high-speed data service is not
available between a mobile and a base station. mBDA is ideal for the first phase of the network rollout
and for any subsequent phase where cost, coverage, and quality need to be optimized.
mBDA offers a modular, robust design that is easy to install, manage and upgrade. It supports three
individually adjustable sub-bands for flexibility and high RF performance, supports multi-carrier and
multi-band operation.
Remote configuration and surveillance is possible through Comba’s remote control and monitoring
system via PC or wireless modem to the OMT/OMC.
Support Technologies
Frequency Range (MHz)
Band Technologies Downlink (DL) Uplink (UL)
700MHz LTE 703-733 758-788
800MHz LTE 791-821 832-862
900MHz GSM/WCDMA 930-960 885-915
1800MHz GSM/LTE 1805-1880 1710-1785
2100MHz WCDMA 2110-2170 1920-1980
2600MHz LTE 2620-2690 2500-2570
WCDMA complies with 3GPP TS 25.106 V9.0.0 (2009-12) table 9.2, 9.3, 9.4 spectrum emission mask.
LTE service is based on 3GPP TS 36.106 V9.0.0 (2009-12)
RF Parameter
LTE 700 MHz
RF Parameter DL UL
Frequency Range (MHz) 703-733 758-788
Max Output Power Per Antenna Port1(Composite) 27, 30, 33 17
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 3-20 3-20
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
Combiner Specifications
Electrical Band1 Band2 Band3 Band4
Operating Frequency (MHz) 791-960 1710-1880 1920-2170 2500-2690
Mechanical Specifications
System Rack (4 bands) 267 x 482 x 485, (10.5 x 19 x 19.1)
Power and Monitor Unit 220 x 80 x 440, (8.7 x 3.1 x 17.3)
Dimensions, H x W x D, mm (in)
Combiner Unit 220 x 60 x 230, (8.7 x 2.4 x 9.1)
RF Unit 220 x 60 x 350, (8.7 x 2.4 x 13.8)
System Rack (4 bands) 13.2, (29.1)
Power & Monitoring Unit 4, (8.8)
Weight, kg (lb) (approx.)
Combiner Unit 4, (8.8)
RF Card 3.8, (8.4)
Power & Monitoring Unit 15
Power Consumption, W (approx.)
RF Unit 50
Power Supply 100-240VAC/47-63Hz
Power Up Waiting Time (sec) (approx.) 180
Enclosure Cooling Convection or Fan
RF Connectors N Female
Operating Temperature (°C ) -20 to +40
Operating Humidity 10% to 85%
Environmental Class IP30
MTBF ( hr) ≥ 50,000
Mounting 19” Rack
Product Description
mBDA is a wireless enhanced solution where high-quality voice or high-speed data service is not
available between a mobile and a base station. mBDA is ideal for the first phase of the network rollout
and for any subsequent phase where cost, coverage, and quality need to be optimized.
mBDA offers a modular, robust design that is easy to install, manage and upgrade. It supports three
individually adjustable sub-bands for flexibility and high RF performance, supports multi-carrier and
multi-band operation.
Remote configuration and surveillance is possible through Comba’s remote control and monitoring
system via PC to the OMT/OMC.
Support Technologies
Frequency Range (MHz)
Band Technologies Downlink (DL) Uplink (UL)
700MHz Upper C LTE 746-757 776-787
700MHz Lower ABC LTE 728-746 698-716
800MHz (ESMR) CDMA/LTE 862-869 817-824
850MHz GSM/CDMA/WCDMA/LTE 869-894 824-849
1900MHz GSMCDMA/WCDMA/LTE 1930-1995 1850-1915
EAWS WCDMA/LTE 2110-2180 1710-1780
2600MHz LTE 2620-2690 2500-2570
RF Parameters
LTE700MHz Upper C
RF Parameter DL UL
Frequency Range (MHz) 746-757 776-787
Max Output Power Per Antenna Port
27, 30, 33 17
1(Composite)
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 1 1
Operating Bandwidth (MHz) 5-11 5-11
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
RF specification is without Combiner Unit, Comber Unit insert loss is less than 1.0dB.
RF Parameters
GSM/CDMA/WCDMA/LTE 1900 MHz
RF Parameter DL UL
Frequency Range (MHz) 1930-1995 1850-1915
Max Output Power Per Antenna Port
27, 30, 33 23
1(Composite)
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 0.2-25 0.2-25
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
System Group Delay (usec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation1 3GPP 3GPP
WCDMA/LTE EAWS
RF Parameter DL UL
Frequency Range (MHz) 2110-2180 1710-1780
Max Output Power Per Antenna Port
27, 30, 33 17
1(Composite)
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 5-20 5-20
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
System Group Delay (usec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Inter modulation 3GPP 3GPP
Note:
Operating Bandwidth: GSM/CDMA Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
RF specification is without Combiner Unit, Comber Unit insert loss is less than 1.0dB.
Mechanical
Dimensions
226.5 x 58.6 x 251, (8.9 x 2.4 x 9.9)
H x W x D, mm (in)
Weight (approx.), kg (lb) 4, (8.8)
RF Connectors 4.3-10Female
Operating Temperature , C
-20 to +40 (68 to 104)
(F)
Operating Humidity 85%
Product Description
mBDA is a wireless enhanced solution where high-quality voice or high-speed data service is not
available between a mobile and a base station. mBDA is ideal for the first phase of the network rollout
and for any subsequent phase where cost, coverage, and quality need to be optimized.
mBDA offers a modular, robust design that is easy to install, manage and upgrade. It supports three
individually adjustable sub-bands for flexibility and high RF performance, supports multi-carrier and
multi-band operation.
Remote configuration and surveillance is possible through Comba’s remote control and monitoring
system via PC to the OMT/OMC.
Support Technologies
Frequency Range (MHz)
Band Technologies Downlink (DL) Uplink (UL)
700MHz Upper C LTE 746-757 776-787
700MHz Lower ABC LTE 728-746 698-716
800MHz (ESMR) CDMA/LTE 862-869 817-824
850MHz GSM/CDMA/WCDMA/LTE 869-894 824-849
1900MHz GSMCDMA/WCDMA/LTE 1930-1995 1850-1915
EAWS LTE 2110-2180 1710-1780
2600MHz LTE 2620-2690 2500-2570
2
Intermodulation: LTE@3GPP; GSM @Less than-13dBm.
RF specification is without Combiner Unit, Comber Unit insert loss is less than 1.0dB.
Mechanical
Dimensions, H*W*D, mm (in) 226.5x58.6x251, (8.9x2.4x9.9)
RF Connectors 4.3-10Female
Operating Temperature ,
-20 to +40 (68 to 104)
C(℉)
Operating Humidity 85%
Product Description
mBDA is a wireless enhanced solution where high-quality voice or high-speed data service is not
available between a mobile and a base station. mBDA is ideal for the first phase of the network rollout
and for any subsequent phase where cost, coverage, and quality need to be optimized.
mBDA offers a modular, robust design that is easy to install, manage and upgrade. It supports three
individually adjustable sub-bands for flexibility and high RF performance, supports multi-carrier and
multi-band operation.
Remote configuration and surveillance is possible through Comba’s remote control and monitoring
system via PC or wireless modem to the OMT/OMC.
Support Technologies
Frequency Range (MHz)
Band Technologies Downlink (DL) Uplink (UL)
700MHz* LTE 758-788/773-803 703-733/718-748
850MHz GSM/CDMA/WCDMA** 869-894 824-849
1800MHz GSM/LTE 1805-1880 1710-1785
1900MHz GSMCDMA/WCDMA** 1930-1995 1850-1915
AWS WCDMA/LTE 2110-2155 1710-1755
2100MHz WCDMA/LTE** 2110-2170 1920-1980
2600MHz LTE 2620-2690 2500-2570
*700MHz is APT band, 2 options as 703-733/758-788 and 718-748/773-803.
**WCDMA complies with 3GPP TS 25.106 V9.0.0 (2009-12) table 9.2, 9.3, 9.4 spectrum emission mask.
LTE 700B
RF Parameter DL UL
Frequency Range (MHz) 773-803 718-748
Max Output Power Per Antenna Port 1(Composite) 27, 30, 33 17
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 3-20 0.2-24.8
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
System Group Delay (sec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Inter modulation 3GPP 3GPP
WCDMA/LTE AWS
RF Parameter DL UL
Frequency Range (MHz) 2110-2155 1710-1755
Max Output Power Per Antenna Port 1(Composite) 27, 30, 33 17
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 3-20 3-20
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
RF specification is without Combiner Unit, Comber Unit insert loss is less than 1.5dB.
Mechanical Specifications
System Rack (4 bands) 267 x482 x 485, (10.5 x 19 x19.1)
Power Unit 220 x 80 x 440, (8.7 x 3.1 x 17.3)
Dimensions, Hx Wx D, mm (in)
Combiner Unit 220 x 60 x 230, (8.7 x 2.4 x 9.1)
RF Unit 220 x 60 x 350, (8.7 x 2.4 x 13.8)
System Rack (4 bands) 13.2, (29.1)
Power and Monitor Unit 4, (8.8)
Weight, kg (lb) (approx.)
Combiner Unit 4, (8.8)
RF Card 3.8, (8.4)
Power and Monitor Unit 15
Power Consumption, W (approx.)
RF Unit 50
Power Supply 100-240VAC/47-63Hz
Power Up Waiting Time (sec)
180
(approx.)
Enclosure Cooling Convection or Fan
RF Connectors N Female
Operating Temperature (°C ) -20 to +40
Operating Humidity 10% to 85%
Environmental Class IP30
MTBF ( hr) ≥ 50,000
Mounting 19” Rack
Block Diagram
Mechanical
Dimensions, W x H x D mm 198 x 78 x 43
Power Consumption W 14
Connectors SMA-Female
MTBF hr 50,000
Mechanical
Dimensions, W x H x D mm 198 x 78 x 43
Power Consumption W 14
Connectors SMA-Female
MTBF hr 50,000
Mechanical
Dimensions, W x H x D mm 198 x 78 x 43
Power Consumption W 14
Connectors SMA-Female
MTBF hr 50,000
Mechanical
Dimensions, W x H x D mm 198 x 78 x 43
Power Consumption W 14
Connectors SMA-Female
MTBF hr 50,000
Mechanical
Dimensions, W x H x D mm 198 x 78 x 43
Power Consumption W 14
Connectors SMA-Female
MTBF hr 50,000
Mechanical
Dimensions, W x H x D mm 198 x 78 x 43
Power Consumption W 14
Connectors SMA-Female
MTBF hr 50,000
Mechanical
Dimensions, W x H x D mm 198 x 78 x 43
Power Consumption W 14
Connectors SMA-Female
MTBF hr 50,000
Mechanical
Dimensions, W x H x D mm 316 x 224 x55
Weight (approx.) kg 3
Power Consumption W 26
Connectors SMA-Female
MTBF hr 50,000
Mechanical
Dimensions, W x H x D mm 316 x 224 x55
Weight (approx.) kg 3
Power Consumption W 30
Connectors SMA-Female
MTBF hr 50,000
Mechanical
Dimensions, W x H x D mm 316 x 224 x 55
Weight (approx.) kg 3
Power Consumption W 26
Connectors SMA-Female
MTBF hr 50,000
Mechanical
Dimensions, W x H x D mm 316 x 224 x 55
Weight (approx.) kg 3
Power Consumption W 30
Connectors SMA-Female
MTBF hr 50,000
Mechanical
Dimensions, W x H x D mm 316 x 224 x55
Weight (approx.) kg 3
Power Consumption W 26
Connectors SMA-Female
MTBF hr 50,000
Mechanical
Dimensions, W x H x D mm 316 x 224 x 55
Weight (approx.) kg 3
Power Consumption W 26
Connectors SMA-Female
MTBF hr 50,000
Mechanical
Dimensions, W x H x D mm 316 x 224 x 55
Weight (approx.) kg 3
Power Consumption W 30
Connectors SMA-Female
MTBF hr 50,000
Mechanical
Dimensions, W x H x D mm 316 x 224 x 55
Weight (approx.) kg 3
Power Consumption W 38
Connectors SMA-Female
MTBF hr 50,000
Mechanical
Dimensions, W x H x D mm 316 x 224 x 55
Weight (approx.) kg 3
Power Consumption W 38
Connectors SMA-Female
MTBF hr 50,000
Mechanical
Dimensions, W x H x D mm 316 x 224 x55
Weight (approx.) kg 3
Power Consumption W 38
Connectors SMA-Female
MTBF hr 50,000
Specifications
Electrical 0.02W
Frequency Range, Uplink MHz 1710-1785
The Comba LTE Small Cell solution includes Home Small Cell, Gateway and NMS (Network
Management System). The architecture is shown in figure1.
Application Scenarios
In-building coverage
In-building data offload
Home, Small Enterprise wireless broadband
Small public hotspots
Emergency coverage
Product Features
RF Specifications
Bandwidth/Carrier 10/20 MHz
Max. Total Output Power 100mW 2x2 MIMO
DL=149Mbps, UL=50Mbps;
Max Capacity
8 active users, 24 RRC users
Sensitivity -93.5 dBm
Listening band Band1, band3 and band7
Air interface
Synchronization
IEEE 1588 ACR
Emission Mask
Spurious Emission Compliant to 3GPPTS 36 104
Inter-modulation
Product Interface
Interface Function
WAN RJ45
( Electrical Port) 100/1000M Ethernet for backhaul
RJ45
LAN
10/100M for Fast Ethernet and Local Commissioning
Power Supply interface
POWER
+12V DC input
ON/OFF Power on/off switch
RESET Reset to manufacture setting
The Comba Enterprise PiCO solution includes Small Cell, Gateway and NMS (Network Management
System). The architecture is shown in figure1.
Application Scenarios
In-building coverage
In-building data offload
Small Enterprise wireless broadband
Public hotspots
Emergency coverage
Product Features
RF Specifications
Bandwidth/Carrier 5/10/15/20 MHz
Max. Total Output Power 24dBm
Sensitivity -93.5 dBm
Emission Mask
Spurious Emission Compliant to 3GPP TS 36 104
Inter-modulation
Product Interface
Interface Function
WAN(Optical Port) SFP, Optical Port for backhaul
WAN(Electrical Port) RJ45, Gigabit-Ethernet interface, backhaul & POE+ Power Supply
LAN RJ45, 100Mbps Fast Ethernet, Local Commissioning port
SIM SIM Card Interface, for Equipment authorization
POWER Power Supply interface, +12V DC input
GPS SMA, GPS Frequency and Time Synchronization input
Reserved Port RJ45, Reserved
CK is the kernel point of PolyCell for centralized signal processing and control. It connects to EPC for S1
signaling processing.
CP is the center point of PolyCell system for distributed signal processing, routing and broadcasting. To
upper level, it connects to CK. To lower level, it connects to sub level CP via optical cable (Daisy Chain
connection) or/and connects to DP via Ethernet cable.
DP is the distributed point for cellular signal broadcasting. DP is directly connecting to CP with PoE+
(Power over Ethernet) rolling.
Main Features
Support 5MHz/10MHz/15MHz/20MHz bandwidth
Flexible solution for small-to-medium scenarios
IP-based backhaul, easy site acquisition
Plug and play, PoE+ power supply and IT Network-like deployment
Self-configuration and self-optimization
End-to-End control and management through Network Management System (NMS)
Software/hardware failure detection and recover
Intelligent power Saving
Application Scenarios
CK(Cell Kernel)
Cloud RAN Design for Cell signal provision
GPS/1588V2 Synchronization
Electrical/Optical backhaul interface
Flexible capacity upgrade: Carrier Aggregation(CA)/Cell Splitting
Ubiquitous Coverage
Product Features
Technical Specification
Electrical Specifications
Operating Frequency(MHz)
Band TDD/FDD/UMTS Uplink(MHz) Downlink(MHz)
1 FDD/UMTS 1920-1980 2110-2170
2(PCS) FDD/UMTS 1850-1910 1930-1990
3 FDD 1710-1785 1805-1880
4(AWS) FDD/UMTS 1710-1755 2110-2155
7 FDD 2500-2570 2620-2690
40 TDD 2300-2370
RF Specifications
RF Module LTE UMTS
Support Bandwidth(MHz) 5/10/15/20 5 x 2(Carriers)
Max. Total Output Power 24dBm(2x2 MIMO) 23dBm(SISO, 2Carriers)
Sensitivity -93.5 dBm @20MHz N/A
Output Power Accuracy ±2dB ±2dB
Output Power Range 20dB N/A
Emission Mask
Compliant to 3GPP TS 36 104
Spurious Emission 3GPP TS 25.106
FCC
Inter modulation
Product Features
Technical Specification
Interfaces of CP
LAN1 LMT(Local Management Terminal 1, RJ45)
SFP1 Optical port to signal source 1
SFP2 Optical port to signal source 2
SFP3 Optical port for CP daisy chain
SFP4 Reserved
ETH1~ETH8 DP Connection Port, 8 x1000Mbps RJ45, software configurable
Power Socket AC:100V - 240V (47Hz - 63Hz)
ON/OFF Switch Power supply ON/OFF switch
Product Features
Technical Specification
System Specifications
Supported Users(LTE) 200 active users Or 400 RRC users
Input Signal range: -12±5 dBm
UMTS CK Feature
Downlink Gain: 35dB Uplink Gain : 35dB
1 x RJ45 Port to WAN
1 x RJ45 Port to LAN
1 x RJ45 Port for Debug
1 x RJ45 Port to GPS
Interface 2 x SFP Port to CP
1 x SFP Port to WAN
1 x SFP Reserved
Power Switch
Mobility Handover and reselection with Macro Cell and other Small Cell
Synchronization Support 1588v2/GPS/A-GPS
RRU is the Remote Radio Unit, by connecting to BBU (Base Band Unit), it can provide high power GSM
coverage.
BBU is the Base Band Unit, it connects to GSM core network by IP based interface and connects to
RRU by optical fiber, providing base band signal to RRU and cellular signaling & data to GSM core
network.
Application Scenarios
Product Features
Flexible Configuration/Deployment
Various backhaul options: Wired backhaul, satellite backhaul, Wi-Fi mesh backhaul, PON,
Microwave and others based on IP
Cascade or star connection supported
Cost-effective design, lower CAPEX and OPEX
IP based for lower transmission request
Easy installation and deployment
Self-optimization and configuration
Remote control and management
Robust outdoor design, never goes down
Technical Specification
Radio Specifications
GSM 900 Band
Operating frequency UL: 885-909 MHz
DL: 930-954 MHz
Channel spacing 200 kHz
GSM carriers 4 Carriers
40W
Maximum output power 46dBm@1ch ; 43dBm@2ch
31dBm@3ch ; 40dBm@4ch
Reference sensitivity level ≤ -104 dBm
Clock Precision ±0.05ppm
VSWR in RF port < 1.5
Interface
Port Type Note
TX1/RX1 N-Female Tx and Rx Main Path
RX2 N-Female Rx diversity input port
OP1, Optical WAN (SFP)
OP2 Optical For Daisy Chain (SFP)
POWER 2 Pin AC/DC input power
ALARM 7Pin 7 pin alarm interface
ON/MOV 5Pin Reserved port
WAN RJ45 WAN (RJ45)
Specifications
GSM Specifications
Number of carriers 4 Carriers (Max 2 EDGE Carriers)
TR069 to NMS
Interface protocol
CPRI to RRU
CS service FR,EFR & SMS
GPRS service CS1~CS4 Coding Scheme
EDGE service MCS1~MSC9 Coding Schemes
Synchronization GPS /IEEE 1588V2
IP SeC Encryption
Security
EAP-AKA Authentication
Power, Mechanical, and Environmental Specifications
Dimensions, H x W x D 420mm × 290mm × 70mm
Weight (approx.) 10kg
AC:156V - 284V
Power supply DC:-57V - -40V
(Different Module)
Power consumption 60 W (approx.)
Mount Pole, Wall
Operating temperature -40°C to +45 °C
Operating humidity <95%
IP level IP55
Interface
Name Type Function
WAN1 RJ45 IP backhaul to GSM gateway
WAN2 Optical (SFP) IP backhaul to GSM gateway
LAN RJ45 Reserved Port
RU1 - RU3 Connect to RRU
RU1~5 Optical SFP)
RU4 - RU5 Daisy Chain connection to BBU
POWER Power Socket 2 pin Interface
LMT RJ45 Local Debug
RST Button Reset Button
GPS N-Female GSP signal connection
OUT-ALM RJ45 External alarm interface
The Base Band Unit (BBU) is an high capacity indoor/outdoor unit, provides LTE baseband traffic,
signaling, and control signal to RRU by fiber.
The Remote Radio Unit (RRU) is an energy efficient system and designed with a robust, convection
cooled (fan less) IP65 housing for use in all outdoor environments. .
Main Features
Superior Performance
Compatible with 3GPP Release 9 (evolved to R10)
5MHz/10MHz/15MHz/20MHz bandwidth support
Robust Design for all Environment & Climate
IP65 for RRU
Fan less design
Logical and physical redundancy
Flexible Configuration/Deployment
Compatible with all TDD frame and special sub-frame configurations
Cascade connection available
Long distant supported from BBU to RRU
Compact design and highly integrated hardware implementation
Application Scenarios
Mobile broadband for Extraodinary Date/Voice coverage
Pulic/Private mobile broadband networks
Urban/Sub-urban/Rural/Remote area coverage
Emergency telecommunications service
Public safety communications
Enterprise/Campus networks
System Architecture
Figure
Figure
Product Description
The AP2600-IDU, A06 indoor CPE is a high-performance indoor 4G Broadband CPE, which supports the
maximum 150Mbps DL speed.
The AP2600-IDU, A06 CPE has the superior wireless access performance and comprehensive routing
capabilities, which supports 820.11 a/b/g/n/ac and advanced VoIP features.
Product Features
Product Specification
Interface Specification
ETH RJ45 WAN Port * 1
ETH RJ45 LAN Port *3
Interface Summary RJ11 Voice Interface * 2
2FF Standard SIM Card * 1
Power DC Port DC 12V/1A
Antenna Internal Antenna Support External Antenna Ports * 2
Power Indication
WAN Signal Strength
LED Wi-Fi/WPS Indication LED
WAN/LAN status LED
Internet status LED
Reset/Reboot Button Power Button/WPS Button/Reset Button
Input range 100 - 240V AC (Adaptor)
Power Supply
Output:12V/1.0A DC
Wi-Fi Specification
Standard IEEE 802.11 a/b/g/n/ac
Frequency Band 2.4GHz +5.8GHz
Tx/Rx Path 2 Tx 2 Rx
Channel Bandwidth 20MHz & 40MHz
Tx Power 20dBm/Antenna
Max Access Users 20
Product Description
AP2600-OP, A14 is one of Comba LTE-CPE Series Product. It combines a robust IP-65 compliant
enclosure with an LTE core supported Release 9 Category 4 along with an integrated high-gain dual
polarization directional antenna. Easy implement LTE coverage extension. It can supply stable, fast, and
easy network access for you.
Product Features
Product Specification
LTE Standard
Mode TDD-LTE
Protocol Release9 Category4 & IPv4/v6 & DHCP
Date Rate (DL:UL=3:1, 20MHz) Downlink Rate 100Mbps/Uplink Rate 10Mbps
Radio
Band38, 2570-2620MHz (TDD-LTE)
Band39, 1880-1920MHz (TDD-LTE)
Operating Frequency
Band40, 2300-2400MHz (TDD-LTE)
Band41, 2555-2655MHz (TDD-LTE)
Antenna 1T2R, 8dBi Gain , Dual-polarization (Vertical/ Horizontal)
Output Power 23dBm±2dBm
Physical
Dimensions H x W x D 260mm x 149mm x 72mm
Weight 0.7kg
Power Supply 15 V DC passive PoE
Power Consumption ≤ 7W
Operating
-40°C to +55°C
Temperature
Relative Humidity 5% to 95% (non-condensing)
Protection IP65
Interface 1 x 10/100M RJ45 port
Button 1 x Reset
3 x Signal Indicator (Low/Mid/High)
1 x Status
Indicator
1 x Power
1 x RUN
Product Description
CP2600-OP, A10 is one of Comba LTE-CPE Series Product. It combines a robust IP-65 compliant
enclosure with an LTE core supported Release 11 Category 6 along with an integrated high-gain dual
polarization directional antenna. Easy implement LTE coverage extension. It can supply stable, fast, and
easy network access for you.
Product Features
Product Specification
LTE Standard
Mode TDD-LTE & FDD-LTE
Protocol Release11 Category6 & IPv4/v6 & DHCP
Date Rate (DL:UL=3:1, 20MHz) Downlink Rate 200Mbps/Uplink Rate 10Mbps
Radio
LTE-FDD Band 2:
(UL: 1850MHz-1910MHz DL: 1930MHz-1990MHz)
LTE-FDD Band 3:
(UL: 1710MHz-1785MHz DL: 1805MHz-1880MHz)
LTE-FDD Band7:
Operating Frequency
(UL: 2500MHz-2570MHz DL: 2620MHz-2690MHz)
LTE-FDD Band 28B:
(UL: 718MHz-748MHz DL: 773MHz- 803MHz)
LTE-TDD Band42:
(UL/DL: 3400MHz-3600MHz)
Antenna 1T2R, Dual-polarization (Vertical/ Horizontal)
Output Power 23dBm ± 2dBm
35MHz FDD-LTE 2CC CA
Carrier Aggregation Ability
40MHz TDD-LTE 2CC CA
Tx/Rx Path 1 Tx 2 Rx
Channel Bandwidth 5/10/15/20 MHz
Tx Power 23dBm +/- 2dBm
Rx Sensitivity -94dBm (20MHz@QPSK)
Software Specification
Language Settings: English, Spanish and
Language Settings: English, Spanish and Portuguese
Portuguese
Support NAT/Router mode Support NAT/Router mode
Support the http or https web server Support the http or https web server
PIN Management, SIM card Authentication PIN Management, SIM card Authentication
Support multi-APN Support multi-APN
Support VPN Support VPN
Ipv6/Ipv4 dual stack Ipv6/Ipv4 dual stack
Support preferred band and frequency Support preferred band and frequency
Support NTP Synchronization Support NTP Synchronization
Device Interface
Comba EPC system can be configured in an extremely flexible and agile way consisting all of its
sub-components (MME, S-GW, P-GW, HSS and PCRF).
Comba EPC system is a carrier-grade flexible scale LTE core network with real-time and it can be turned
to all kinds of applications. 3GPP-based standard interface enables smooth interoperability with all the
other LTE network components, including various kinds of eNodeB (Macro, Micro and Pico), UE and
billing system.
Main Features
Application Scenarios
Moreover, it is integrated with the function of security gateway (SeGW) that establishes encrypted IPSec
tunnels to different Cells. Furthermore, it offers high availability (99.999%) while provisioning and
maintaining a large number of Small Cells.
Key Features
IP based Architecture
X86 Hardware
Fully compliant with 2G/4G Standards
Flexible Configuration/Deployment
Standard A, Gb interface to GSM Core
Standard S1 Interface to LTE Core
Support Ipsec tunnel to different backhaul
Active/Standby redundancy
System Architecture
Carrier
Central
NMS
Firewall
Application Server
Communication Server
CMS Capacity
NE Qty 10000, under recommended HW & SW configuration
NE data in database One year data
Concurrent login user Qty Maximum 50, recommended 15 for a better performance
CMS Performance
Data Packet Decoding Speed 10 per second
SMS. With SMS mode, devices must be equipped with inside modems to send/receive SMS to/from
CMS; and CMS also must be equipped with a modem or directly connecting with SMS
Center/gateway to send/receive SMS to/from devices.
Packet Switched Data (PSD), such as GPRS, CDMA 1x, HSDPA, etc. With PSD mode, devices
must be equipped with inside modems, and inserted with a PSD enabled SIM/UIM/USIM.
Ethernet. With this mode, devices must be equipped with inside Network Interface Card (NIC).
Circuit Switched Data (CSD) isn’t supported.
North-Bound Interface
Currently CMS supports below NBI to transfer CMS information to other EMS/NMS.
SNMP Trap, Email, SMS for alarm forwarding.
Timely Performance/Inventory file for performance/inventory management.
System Requirements
CMS Server Recommended Hardware Requirements
Processor Processor
Memory Memory
Europe Headquarters
Comba Telecom Systems AB
Add: Gustavslundsvagen 147,
SE-167 51 Bromma, Stockholm, Sweden
Tel: +46 8 253 870
Fax: +46 8 253 871
business card
For more local offices information,
Please visit our website
www.comba-telecom.com