Professional Documents
Culture Documents
Instruction
Hydro Analysis
Download the “HA setup” file and the “HT_Driver_MH2020”
*
If “Hydrocom6” is already installed please see the remark at the end.
Install the “HA (Hydro Analysis)” software follow the instruction at screen.
Install the “HT_Driver_MH2020” follow the Instruction at screen. All windows safety
remarks have to accept.
Connect the Measurement Tool and switch it on. Windows is setting now the right
driver. If all is correct it should the follow setting at the device manager.
Start now the HA software. The first start takes a little longer because the software is
doing some settings at background.
Open the “Option” dialog at the “Instrument” menu.
At the dialog chose the “RS 232” button. And press the “Find button” at “COM interface”
The settings will be automatically detected.
Press “OK”
Now click the “Connect” Button to connect to the Tool.
Note: The measurement tool has to be connected and switched ON
Now the tool is connected and can be used. It should look like the follow.
* If the “Hydrocom6 is already “installed at the PC it has to be complied removed,
otherwise you will not get the Full Volvo add‐ons.