You are on page 1of 1

1 - Camshaft Position (CMP) Sensor -G40- 12 - Engine speed (RPM) sensor -G28-

2 - Knock sensor 1 -G61- 13 - Throttle Valve Control Module -J338-


3 - Knock sensor 2 -G66- 14 - Valve 1 for camshaft adjustment -N205-
4 - Secondary Air Injection solenoid valve -N112- 15 - Fuel injectors -N30, N31, N32, N33, N83-
5 - Motronic Engine Control Module (ECM) -J220- 16 - 6-pin harness connector for G39,
6 - Engine Coolant Temperature (ECT) Sensor -G62- 17 - Heated Oxygen Sensor (HO2S) -G39- before
catalytic converter
7 - Evaporative Emission (EVAP) Canister Purge 18 - 4-pin harness connector for G465
Regulator Valve -N80- Only for engine code BPR
8 - Ignition coil with power output stage -N70, N127, 19 - Oxygen Sensor O2S Bank 1 -G465 - Only for
N291, N292, N323- engine code BPR
9 – Mass Air Flow (MAF) Sensor -G70-/Intake Air 20 - 4-pin harness connector for G130
Temperature (IAT) Sensor -G42-
10 - Auxiliary relay carrier above central electronics - 21 - Oxygen Sensor (O2S) Behind Three Way
J299 and J317 Catalytic Converter (TWC) -G130-
11 - Secondary Air Injection (AIR) pump motor -
V101-

You might also like