Professional Documents
Culture Documents
Control de Valvulas 3
Control de Valvulas 3
52SS Page 1
1. Position upper housing so internal passages and check ball seats are facing upward. Then install check balls in housing. Eight check balls are used.
The single large check ball is approximately 8.7 mm (11/32 inch) diameter. The single small check ball is approximately 4.8 mm (3/16 inch) in
diameter. The remaining 6 check balls are approximately 6.3 mm (1/4 inch) in diameter.
2. Position assembled transfer plate and upper housing separator plate on upper housing. Be sure filter screen is seated in proper housing recess.
3. Install the ECE check ball into the transfer plate. The ECE check ball is approximately 4.8 mm (3/16 inch) in diameter.
1996 Jeep Truck Grand Cherokee 4WD V8-318 5.2L VIN Y MFI Copyright © 2013, ALLDATA 10.52SS Page 2