ANALOGUE MONITORS
SYSTEM 20 MONITORS
Or Calta Motor Ta ara
Stroh ea e040
ay =
Fow Pressure Temperate
[csi Duals borps [Dua sal OF |
aa -
Construction:
A sealed ansemblyraqurng no routine
maintenance or adustment. Body moulding
in AaryoiileBuadene Styrene (ABS)
The meritors suitable for use witha
rmnerl i, wate emulsions and water
‘Tha monitor has 3 dayglo ial guages and
featwes aprotecive hinged cover.
(GUAGE DETAILS.
Flow Section
‘The ow scale as double eae for size
and 2 sensors only. Calrated upto 100,
lin and 320 Uni. The low cia has
xcesow indication
When the systemisin reverse ow or when
the high pressure lines to the sensor have
‘ben transposed, below zero ndcation is
ven
Pressure Section
“Two modes of pressure evel monitor are
tvalable. The medium pressure uit gives
da readings in bh bar and ps to 160 bar
(2300 psi. Te high pressure nit gives al
readings up to 420 ba (600 ps.
Temperature Section
“The temperature dal gives readings
between 10°C and 110°C (0 to 200
Dimensions:
“The ABS casei 27mm long, tO4mm wide
and mm deep overall.
Weight: 14kg
Avicositycoreton char is provided for
‘mineral applications where monitoring is
required at variable iscsi.