You are on page 1of 95

Inverter Single Wall Mounted

CSA
R410A(50/60 Hz)
TA-0RMI0-01A

P/No. : MFL68143806
Test Condition of International Standard

ISO AHAM SASO


KSC AHRI AS/NZS
CLASSIFICATION 5151 (Window 2681
9306 210/240 3823.1
T1 T3 AC) T1 T3
DB°C(°F) 27.0 27.0 29.0 26.7 (80) 26.7 (80) 27.0 27.0 29.0
Indoor
Cooling WB°C(°F) 19.0 19.0 19.0 19.4 (67) 19.4 (67) 19.0 19.0 19.0
Capacity DB°C(°F) 35.0 35.0 46.0 35.0 (95) 35.0 (95) 35.0 35.0 46.0
Outdoor
WB°C(°F) 24.0 24.0 24.0 23.9 (75) 23.9 (75) 24.0 24.0 24.0
DB°C(°F) 20.0 20.0 20.0 21.1 (70) 21.1 (70) 20.0 20.0 20.0
Indoor
Heating WB°C(°F) 15.0 15.0 15.0 15.6 (60) 15.6 (60) 15.0 15.0 15.0
Capacity DB°C(°F) 7.0 7.0 7.0 8.3 (47) 8.3 (47) 7.0 7.0 7.0
Outdoor
WB°C(°F) 6.0 6.0 6.0 6.1 (43) 6.1 (43) 6.0 6.0 6.0
DB°C(°F) 32.0 32.0 32.0 26.7 (80) 32.2 (90) 32.0 32.0 32.0
Maximum Indoor
WB°C(°F) 23.0 23.0 13.0 19.4 (67) 22.8 (73) 23.0 23.0 13.0
Cooling
DB°C(°F) 43.0 43.0 52.0 46.11 (115) 43.3 (110) 43.0 43.0 52.0
Operating Outdoor
WB°C(°F) 26.0 26.0 31.0 23.9 (75) 25.6 (78) 26.0 26.0 31.0
DB°C(°F) 27.0 27.0 27.0 26.7 (80) 26.7 (80) 27.0 27.0 27.0
Maximum Indoor
WB°C(°F) 15.0 - - - 22.8 (73) - - -
Heating
DB°C(°F) 21.0 24.0 24.0 23.9 (75) 23.9 (75) 24.0 24.0 24.0
Operating Outdoor
WB°C(°F) 15.0 18.0 18.0 18.3 (65) 18.3 (65) 18.0 18.0 18.0
Enclosure DB°C(°F) 27.0 27.0 27.0 26.7 (80) 26.7 (80) 27.0 27.0 27.0
Indoor
Sweat / WB°C(°F) 24.0 24.0 24.0 23.9 (75) 23.9 (75) 24.0 24.0 24.0
Condensate DB°C(°F) 27.0 27.0 27.0 26.7 (80) 26.7 (80) 27.0 27.0 27.0
Disposal Outdoor
WB°C(°F) 24.0 24.0 24.0 23.9 (75) 23.9 (75) 24.0 24.0 24.0
DB°C(°F) 21.0 21.0 21.0 19.4 (67) 21.1 (70) 21.0 21.0 21.0
Freeze-up / Indoor
WB°C(°F) 15.0 15.0 15.0 13.9 (57) 15.6 (60) 15.0 15.0 15.0
Low
DB°C(°F) 21.0 21.0 21.0 19.4 (67) 21.1 (70) 21.0 21.0 21.0
Temperature Outdoor
WB°C(°F) 15.0 - - 13.9 (57) 15.6 (60) - - -

KS : Korea Standard
ISO : International Standard Organization
AHRI : Air-Conditioning, Heating, and Refrigeration Institute
AHAM : Association of Home Appliance Manufacturers
AS/NZS : Australia and New Zealand Standard
SASO : Saudi Arabian Standards Organization
Jowfsufs!Tjohmf
Wall Mounted - 50/60 Hz (R410A)

Inverter Single

1.Models Line Up
2.Nomenclature
3.Specifications
4.Function List
5.Dimensional Drawings
6.Wiring Diagrams
7.Refrigerant Cycle Diagrams
8.Capacity Tables
9.Capacity Coefficient Factor
10.Operation Range
11.Air Flow and Temperature Distributions (Reference Data)
12.Sound Levels (Reference Data)
13.Remote Controller
14.Installation
Inverter Single Wall Mounted - 50/60 Hz (R410A)
1. Models Line Up
1.1 Indoor Unit
Model Name
Category Picture Chassis Nominal Capacity [kW (kBtu/h)]
2.70 (9) 3.52 (12) 5.28 (18) 6.45 (24)
VM122C7
(USNQ122J2P0)
Standard VM092C7 VM182C7 VM242C7
SJ / SK
Plus (USNQ092J2P0) (USNQ182K2P0) (USNQ242K2P0)
VM121C7
(USNQ121J2P0)
VM122C6
(USNQ122J3W0)
VM092C6 VM182C6 VM242C6
Standard SJ / SK (USNQ092J3W0) (USNQ182K3W0) (USNQ242K3W0)
VM121C6
(USNQ121J3W0)

VR092C7 VR122C7 VR182C7 VR242C7


Artcool SJ / SK (USNQ092JRP0) (USNQ122JRP0) (USNQ182KRP0) (USNQ242KRP0)

2
Inverter Single Wall Mounted - 50/60 Hz (R410A)
1. Models Line Up
1.2 Outdoor Unit
Model Name
Power
Picture Chassis Nominal Capacity [kW (kBtu/h)]
Supply
2.70 (9) 3.52 (12) 5.28 (18) 6.45 (24)

VM121C7
1 Ø, (USUQ121J2P0)
115 V, UA3
50/60 Hz VM121C6
(USUQ121J3W0)

VM092C7 VM122C7
(USUQ092J2P0) (USUQ122J2P0)

VM092C6 VM122C6
UA3 (USUQ092J3W0) (USUQ122J3W0)

VR092C7 VR122C7
(USUQ092JRP0) (USUQ122JRP0)
VM182C7
(USUQ182K2P0)

VM182C6
UL2 (USUQ182K3W0)

1 Ø, VR182C7
(USUQ182KRP0)
220 V,
50/60 Hz
VM242C7
(USUQ242K2P0)
U24A
VR242C7
(USUQ242KRP0)

VM242C6
UE (USUQ242K3W0)

3
Inverter Single Wall Mounted - 50/60 Hz (R410A)
2. Nomenclature

Nomenclature_่
Model
A S - W 1 2 6 J 1 R 1
Name
No. 1 2 3 4 5 6 7 8 9 10 11

No. Signification No. Signification

1 Refrigerant Type & Code 9 Look & Color


A : R410A, Made in Korea
B : R410A, Made in Thailand s––’GMG
w“ˆ›–™” s––’Guˆ”Œ kŒšŠ™—›–•
j–“–™
D : R410A, Made in Saudi Arabia
E : R410A, Made in Turkey R Artcool Mirror Black
J : R410A, Made in India 1 R Look White Panel (Transparent)
SA
2 Semi-R Look White Panel (Silver Deco)
U : R410A, Made in China SJ
3 E Look White Panel
W : R32, Made in Korea SK
4 Semi-R Look White Panel (Red Deco)
2 Product type 5 Semi-R Look White Panel (Gold Deco)
S : Split SM M Moving Panel White Panel
4 E Look White Panel
3 Supply Type SM
E Blowkiss E White Panel (White Deco)
S2
- : Set W Blowkiss R White Panel (White Deco)
N : Indoor Unit 4 E Look White Panel
U : Outdoor Unit SW
S S Look White Panel
SH
A : C/SKD Indoor Unit W Blowkiss R White Panel (White Deco)
B : C/SKD Outdoor Unit 4 E Look White Panel
SV
M : Mock-Up 8 Semi-R Look White Panel (Silver Deco)
1 - White Panel
S3
4 Model Type W - White Panel (Lighting)
C : Cooling Only SB 1 Libero R White Panel (Transparent)
H : Heat Pump SC 2 Libero R White Panel (Transparent)
Q : DC Inverter Cooling Only 4 E Look White Panel
SB
W : DC Inverter Heat Pump R Artcool Mirror Black
SC
S S Look White Panel
5, 6 Capacity
Ex) 12 : 12,000 Btu/h
10 Function
7 Electric Ratings A : Non Plasma + 2 Way
1 : 1 Ø, 115 V, 60 Hz B : Non Plasma + 4 Way
2 : 1 Ø, 220 V, 60 Hz D : Ionizer + 2 Way
3 : 1 Ø, 208/230 V, 60 Hz E : Non Plasma + 2 Way + 3M Filter + Mosquito Away
6 : 1 Ø, 220-240 V, 50 Hz G : Ionizer + 2 Way + 3M Filter
K : Non Plasma + 2 Way + Mosquito Away
8 Indoor Unit Platform R : Ionizer + 4 Way
2 : S2 E : SE S : Ionizer + 4 Way + 3M Filter
3 : S3 H : SH V : Non Plasma + 4 Way + 3M Filter
4 : S4 J : SJ W : Non Plasma + 2 Way + 3M Filter
Z : Ionizer + 4way + Embedded Wi-Fi
5 : S5 K : SK
A : SA M : SM
B : SB V : SV
11 Standard Model No.
C : SC W : SW

4
Inverter Single Wall Mounted - 50/60 Hz (R410A)
2. Nomenclature

Nomenclature_้
Model
S 4 - W 1 2 J L 1 Y 1
Name
No. 1 2 3 4 5 6 7 8 9 10 11

No. Signification No. Signification

1 Product Type 9 Look & Color


S : Split Look &
Platform Look Name Description
Color
2 Refrigerant R Artcool Mirror Black
2 : R22 1 R Look White Panel (Transparent)
3 : R32 SA 2 Semi-R Look White Panel (Silver Deco)
4 : R410A SJ
3 E Look White Panel
SK
4 Semi-R Look White Panel (Red Deco)
3 Supply Type 5 Semi-R Look White Panel (Gold Deco)
- : Set SM M Moving Panel White Panel
N : Indoor Unit 1 R Look White Panel (Transparent)
U : Outdoor Unit 2 Semi-R Look White Panel (Silver Deco)
A : C/SKD Indoor Unit SM
SM+ 3 E Look White Panel
B : C/SKD Outdoor Unit S2 W Blowkiss R White Panel (White Deco)
M : Mock-Up B Blowkiss R White Panel (Black Deco)
V Blowkiss R White Panel (Silver Deco)
4 Model Type 5 E Look White Panel
SW
C : Cooling Only SH 6 Semi-R Look White Panel (Silver Deco)
H : Heat Pump 2 Semi-R Look White Panel (Silver Deco)
Q : DC Inverter Cooling Only SV
3 E Look White Panel
W : DC Inverter Heat Pump 1 - White Panel
S3
W - White Panel (Lighting)
5, 6 Capacity
Ex) 12 : 12,000 Btu/h 10 Function
7 Indoor Unit Platform Function
Module Airflow Wi-Fi 3M Filter Gen Mode
Digit
2 : S2 H : SH
None 2way A
3 : S3 J : SJ O 3
4 : S4 K : SK O W
5 : S5 M : SM O Q
A : SA V : SV 4way B
O F
E : SE W : SW
O V
Ionizer 2way O 4
8 Outdoor Unit Platform
4way R
A : UA3 E : UE O Z
L : UL2 P : UE1+ O S
2 : U24A D : UD O O P
O O J
4 : U4
O O O T
Mosquito 2way K
O E
4way O 7
O 6
O O 2
O O 5
O O O 8
Air Purifying 4way N
O Y
O C

11 Standard Model No.

5
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM092C7.SJ0 VM122C7.SJ0
Model (VM092C7.NJ0 / VM092C7.UJ0) (VM122C7.NJ0 / VM122C7.UJ0)
Set (Indoor / Outdoor) Unit
Factory US-Q092J2P0 US-Q122J2P0
Model (USNQ092J2P0 / USUQ092J2P0) (USNQ122J2P0 / USUQ122J2P0)
kW 0.70 2.70 3.52 0.70 3.52 4.04
Cooling Min ~ Rated ~ Max
Btu/h 2,400 9,200 12,000 2,400 12,000 13,800
kW - - - - - -
Cooling (T3) Min ~ Rated ~ Max
Capacity Btu/h - - - - - -
kW - - - - - -
Heating Min ~ Rated ~ Max
Btu/h - - - - - -
Heating -7 °C Rated kW - -
Cooling Min ~ Rated ~ Max W 160 770 1,300 160 1,080 1,450
Power Input Cooling (T3) Min ~ Rated ~ Max W - - - - - -
Heating Min ~ Rated ~ Max W - - - - - -
Cooling Min ~ Rated ~ Max A 0.70 3.50 6.20 0.70 4.80 6.50
Running Cooling (T3) Min ~ Rated ~ Max A - - - - - -
Current
Heating Min ~ Rated ~ Max A - - - - - -
W/W 3.50 3.26
EER
(Btu/h)/W 11.95 11.11
W/W - -
EER (T3)
(Btu/h)/W - -
SEER - - -
W/W - -
COP
(Btu/h)/W - -
SCOP - - -
Energy Label Grade Cooling / Heating - B/- C/-
Monthly Energy Consumption Cooling / Heating kWh/month 96.52 / - 137.21 / -
Power Supply Ø, V, Hz 1, 220, 50/60 1, 220, 50/60
Available Voltage Range V 187 ~ 253 187 ~ 253
Power Factor Cooling / Heating % 97.5 / - 97.5 / -
Moisture Removal l/h 0.80 0.80
Cooling, Max / H / M / L ໽/min 12.5 / 9.3 / 7.2 / 2.7 12.5 / 9.3 / 7.2 / 2.7
Air Flow Rate
Heating, Max / H / M / L ໽/min - -
Cooling, Max / H / M / L / SL dB(A) 47 / 41 / 36 / 28 / 21 47 / 41 / 36 / 28 / 21
Sound Pressure Level
Heating, Max / H / M / L dB(A) - -
Indoor Sound Power Level dB(A) - -
Dimensions Net mm 837 × 308 × 189 837 × 308 × 189
(W × H × D) Shipping mm 909 × 383 × 256 909 × 383 × 256
Net kg 8.8 8.8
Weight
Shipping kg 10.8 10.8
Exterior Color Code - Munsell 7.5BG 10/2 (RAL 9016) Munsell 7.5BG 10/2 (RAL 9016)
Air Flow Rate Max ໽/min 27.0 27.0
Cooling, Min ~ Max rpm 260 ~ 1000 260 ~ 1000
Fan Motor Speed
Heating, Min ~ Max rpm - -
Cooling, Rated dB(A) 51 51
Sound Pressure Level
Heating, Rated dB(A) - -
Sound Power Level dB(A) - -
Dimensions Net mm 717 × 483 × 230 717 × 483 × 230
Outdoor (W × H × D) Shipping mm 837 × 530.5 × 317 837 × 530.5 × 317
Net kg 24.6 24.6
Weight
Shipping kg 26.5 26.5
Max. Fuse Size A 20 20
Exterior Color Code - Munsell 9.54Y 8.34/1.31 (RAL 9001) Munsell 9.54Y 8.34/1.31 (RAL 9001)
Cooling ୅ DB 18 ~ 48 18 ~ 48
Operation Range Heating ୅ DB - -
Heating ୅ WB - -
Circuit Breaker A 15 15
Power Supply Cable No. × ༅ 3×1 3×1
Power Supply to Unit - Outdoor Outdoor
Power and Communication Cable No. × ༅ 4 × 0.75 4 × 0.75
Liquid mm ø 6.35 ø 6.35
Size
Piping Gas mm ø 9.52 ø 9.52
Connections Method Indoor / Outdoor - Flared / Flared Flared / Flared
Drain Hose Size O.D, I.D mm 21.5, 16.0 21.5, 16.0
Min / Standard / Max m 3.6 / 7.5 / 15 3.6 / 7.5 / 15
Between Piping Length
No Charge m 7.5 7.5
Indoor &
Outdoor Max. Elevation Difference m 7 7
Piping Connection Heat Insulation - Both liquid and gas pipes Both liquid and gas pipes
Type - R410A R410A
Pre Charge g 850 850
Additional Charge g/m 20 20
Refrigerant
Control - Capillary Capillary
Global Warning Potential - 2087.5 2087.5
t-COဌ eq - 1.77 1.77
Defrost Method - - -
Tool Code (Chassis) Indoor / Outdoor - SJ / UA3 SJ / UA3
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

6
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM092C7.SJ0 VM122C7.SJ0
Model (VM092C7.NJ0 / VM092C7.UJ0) (VM122C7.NJ0 / VM122C7.UJ0)
Set (Indoor / Outdoor) Unit
Factory US-Q092J2P0 US-Q122J2P0
Model (USNQ092J2P0 / USUQ092J2P0) (USNQ122J2P0 / USUQ122J2P0)
Type - Twin Rotary Twin Rotary
Model - GST102MAA GST102MAA
Motor Type - BLDC BLDC
Compressor Oil Type / Maker - POE (RB68A) / Sun Oil or Jx Nippon POE (RB68A) / Sun Oil or Jx Nippon
Oil Charge cc 280 280
O.L.P. Name - - -
Manufacturer / Country of Origin - LG Electronics / China LG Electronics / China
Type - Cross Flow Fan Cross Flow Fan
Fan(Indoor)
Motor Output W 30 30
Type - Propeller Fan Propeller Fan
Motor Type - BLDC BLDC
Fan
Motor Output W 43 43
(Outdoor)
Motor Insulation - Class E Class E
Motor Enclosure / Ingress Protection - TEAO / IPX5 TEAO / IPX5
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 15 x 21FPI x 618) x 1 (ø7 x 2 x 15 x 21FPI x 618) x 1
(ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Evaporator (ø x Row x Column x FPI/FPDM x L) x Qty. #3 - -
(ø x Row x Column x FPI/FPDM x L) x Qty. #4 - -
Heat Corrosion Protection - PCM PCM
Exchanger Fin Type - Slit Slit
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 22 x 18FPI x 667) x 1 (ø7 x 2 x 22 x 18FPI x 667) x 1
Condenser (ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Corrosion Protection - Gold Gold
Fin Type - Louver Louver
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

7
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM182C7.SK0 VM242C7.SK0
Model (VM182C7.NK0 / VM182C7.UK0) (VM242C7.NK0 / VM242C7.UK0)
Set (Indoor / Outdoor) Unit
Factory US-Q182K2P0 US-Q242K2P0
Model (USNQ182K2P0 / USUQ182K2P0) (USNQ242K2P0 / USUQ242K2P0)
kW 1.08 5.28 5.36 1.03 6.45 7.18
Cooling Min ~ Rated ~ Max
Btu/h 3,685 18,000 18,300 3,500 22,000 24,500
kW - - - - - -
Cooling (T3) Min ~ Rated ~ Max
Capacity Btu/h - - - - - -
kW - - - - - -
Heating Min ~ Rated ~ Max
Btu/h - - - - - -
Heating -7 °C Rated kW - -
Cooling Min ~ Rated ~ Max W 238 1,620 1,710 240 1,980 2,400
Power Input Cooling (T3) Min ~ Rated ~ Max W - - - - - -
Heating Min ~ Rated ~ Max W - - - - - -
Cooling Min ~ Rated ~ Max A 1.10 7.00 8.10 1.40 8.20 10.50
Running Cooling (T3) Min ~ Rated ~ Max A - - - - - -
Current
Heating Min ~ Rated ~ Max A - - - - - -
W/W 3.26 3.26
EER
(Btu/h)/W 11.11 11.11
W/W - -
EER (T3)
(Btu/h)/W - -
SEER - - -
W/W - -
COP
(Btu/h)/W - -
SCOP - - -
Energy Label Grade Cooling / Heating - C/- C/-
Monthly Energy Consumption Cooling / Heating kWh/month 203.21 / - 246.31 / -
Power Supply Ø, V, Hz 1, 220, 50/60 1, 220, 50/60
Available Voltage Range V 187 ~ 253 187 ~ 253
Power Factor Cooling / Heating % 96 / - 98.1 / -
Moisture Removal l/h 1.60 1.90
Cooling, Max / H / M / L ໽/min 19 / 13.5 / 12 / 9 20 / 15 / 13.5 / 10.5
Air Flow Rate
Heating, Max / H / M / L ໽/min - -
Cooling, Max / H / M / L / SL dB(A) 51 / 44 / 42 / 37 / 31 52 / 47 / 42 / 38 / 31
Sound Pressure Level
Heating, Max / H / M / L dB(A) - -
Indoor Sound Power Level dB(A) - -
Dimensions Net mm 998 × 345 × 210 998 × 345 × 210
(W × H × D) Shipping mm 1080 × 422 × 281 1080 × 422 × 281
Net kg 12.2 12.2
Weight
Shipping kg 14.6 14.6
Exterior Color Code - Munsell 7.5BG 10/2 (RAL 9016) Munsell 7.5BG 10/2 (RAL 9016)
Air Flow Rate Max ໽/min 38.0 49.0
Cooling, Min ~ Max rpm 200 ~ 900 190 ~ 840
Fan Motor Speed
Heating, Min ~ Max rpm - -
Cooling, Rated dB(A) 54 55
Sound Pressure Level
Heating, Rated dB(A) - -
Sound Power Level dB(A) - -
Dimensions Net mm 770 × 545 × 288 870 × 650 × 330
Outdoor (W × H × D) Shipping mm 925 × 593 × 393 1041 × 693 × 456
Net kg 32.5 42.0
Weight
Shipping kg 35.2 46.0
Max. Fuse Size A 15 20
Exterior Color Code - Munsell 9.54Y 8.34/1.31 (RAL 9001) Munsell 9.54Y 8.34/1.31 (RAL 9001)
Cooling ୅ DB 18 ~ 48 18 ~ 48
Operation Range Heating ୅ DB - -
Heating ୅ WB - -
Circuit Breaker A 20 20
Power Supply Cable No. × ༅ 3 × 1.5 3 × 1.5
Power Supply to Unit - Outdoor Outdoor
Power and Communication Cable No. × ༅ 4 × 0.75 4 × 0.75
Liquid mm ø 6.35 ø 6.35
Size
Piping Gas mm ø 12.7 ø 15.88
Connections Method Indoor / Outdoor - Flared / Flared Flared / Flared
Drain Hose Size O.D, I.D mm 21.5, 16.0 21.5, 16.0
Min / Standard / Max m 3.6 / 7.5 / 20 3.6 / 7.5 / 20
Between Piping Length
No Charge m 7.5 7.5
Indoor &
Outdoor Max. Elevation Difference m 10 10
Piping Connection Heat Insulation - Both liquid and gas pipes Both liquid and gas pipes
Type - R410A R410A
Pre Charge g 1230 1400
Additional Charge g/m 20 20
Refrigerant
Control - Capillary Capillary
Global Warning Potential - 2087.5 2087.5
t-COဌ eq - 2.57 2.92
Defrost Method - - -
Tool Code (Chassis) Indoor / Outdoor - SK / UL2 SK / U24A
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

8
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM182C7.SK0 VM242C7.SK0
Model (VM182C7.NK0 / VM182C7.UK0) (VM242C7.NK0 / VM242C7.UK0)
Set (Indoor / Outdoor) Unit
Factory US-Q182K2P0 US-Q242K2P0
Model (USNQ182K2P0 / USUQ182K2P0) (USNQ242K2P0 / USUQ242K2P0)
Type - Twin Rotary Twin Rotary
Model - GAT156MAD GAT156MAD
Motor Type - BLDC BLDC
Compressor Oil Type / Maker - POE (RB68A) / Sun Oil or Jx Nippon POE (RB68A) / Sun Oil or Jx Nippon
Oil Charge cc 400 400
O.L.P. Name - - -
Manufacturer / Country of Origin - LG Electronics / China LG Electronics / China
Type - Cross Flow Fan Cross Flow Fan
Fan(Indoor)
Motor Output W 58 58
Type - Propeller Fan Propeller Fan
Motor Type - BLDC BLDC
Fan
Motor Output W 43 70
(Outdoor)
Motor Insulation - Class E Class E
Motor Enclosure / Ingress Protection - TEAO / IPX4 TEAO / IPX5
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 16 x 20FPI x 744) x 1 (ø7 x 2 x 16 x 20FPI x 744) x 1
(ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Evaporator (ø x Row x Column x FPI/FPDM x L) x Qty. #3 - -
(ø x Row x Column x FPI/FPDM x L) x Qty. #4 - -
Heat Corrosion Protection - PCM PCM
Exchanger Fin Type - Slit Slit
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 24 x 18FPI x 823) x 1 (ø7 x 2 x 28 x 18FPI x 940) x 1
Condenser (ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Corrosion Protection - Gold Gold
Fin Type - Louver Louver
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

9
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM121C7.SJ0 VM121C6.SJ1
Model (VM121C7.NJ0 / VM121C7.UJ0) (VM121C6.NJ1 / VM121C6.UJ1)
Set (Indoor / Outdoor) Unit
Factory US-Q121J2P0 US-Q121J3W0
Model (USNQ121J2P0 / USUQ121J2P0) (USNQ121J3W0 / USUQ121J3W0)
kW 0.88 3.52 4.04 1.03 3.52 3.81
Cooling Min ~ Rated ~ Max
Btu/h 3,000 12,000 13,800 3,500 12,000 13,000
kW - - - - - -
Cooling (T3) Min ~ Rated ~ Max
Capacity Btu/h - - - - - -
kW - - - - - -
Heating Min ~ Rated ~ Max
Btu/h - - - - - -
Heating -7 °C Rated kW - -
Cooling Min ~ Rated ~ Max W 250 1,150 1,550 158 1,170 1,394
Power Input Cooling (T3) Min ~ Rated ~ Max W - - - - - -
Heating Min ~ Rated ~ Max W - - - - - -
Cooling Min ~ Rated ~ Max A 1.50 9.60 12.00 0.90 9.82 12.13
Running Cooling (T3) Min ~ Rated ~ Max A - - - - - -
Current
Heating Min ~ Rated ~ Max A - - - - - -
W/W 3.06 3.01
EER
(Btu/h)/W 10.43 10.26
W/W - -
EER (T3)
(Btu/h)/W - -
SEER - - -
W/W - -
COP
(Btu/h)/W - -
SCOP - - -
Energy Label Grade Cooling / Heating - D/- -/-
Monthly Energy Consumption Cooling / Heating kWh/month 143.9 / - -/-
Power Supply Ø, V, Hz 1, 115, 60 1, 115, 50/60
Available Voltage Range V 98 ~ 132 98 ~ 132
Power Factor Cooling / Heating % 97.5 / - 95 / -
Moisture Removal l/h 0.80 0.80
Cooling, Max / H / M / L ໽/min 12.5 / 9.3 / 7.2 / 2.7 12.5 / 9.3 / 7.2 / 2.7
Air Flow Rate
Heating, Max / H / M / L ໽/min - -
Cooling, Max / H / M / L / SL dB(A) 47 / 41 / 36 / 28 / 21 47 / 41 / 36 / 28 / 21
Sound Pressure Level
Heating, Max / H / M / L dB(A) - -
Indoor Sound Power Level dB(A) - -
Dimensions Net mm 837 × 308 × 189 837 × 308 × 189
(W × H × D) Shipping mm 909 × 383 × 256 909 × 383 × 256
Net kg 8.8 8.5
Weight
Shipping kg 10.8 10.4
Exterior Color Code - Munsell 7.5BG 10/2 (RAL 9016) Munsell 7.5BG 10/2 (RAL 9016)
Air Flow Rate Max ໽/min 27.0 27.0
Cooling, Min ~ Max rpm 260 ~ 1000 260 ~ 1000
Fan Motor Speed
Heating, Min ~ Max rpm - -
Cooling, Rated dB(A) 51 51
Sound Pressure Level
Heating, Rated dB(A) - -
Sound Power Level dB(A) - -
Dimensions Net mm 717 × 483 × 230 717 × 483 × 230
Outdoor (W × H × D) Shipping mm 837 × 530.5 × 317 837 × 530.5 × 317
Net kg 25.2 25.2
Weight
Shipping kg 27.2 27.2
Max. Fuse Size A 20 20
Exterior Color Code - Munsell 9.54Y 8.34/1.31 (RAL 9001) Munsell 9.54Y 8.34/1.31 (RAL 9001)
Cooling ୅ DB 18 ~ 48 18 ~ 48
Operation Range Heating ୅ DB - -
Heating ୅ WB - -
Circuit Breaker A 20 20
Power Supply Cable No. × ༅ 3 × 1.5 3 × 1.5
Power Supply to Unit - Outdoor Outdoor
Power and Communication Cable No. × ༅ 4 × 0.75 4 × 0.75
Liquid mm ø 6.35 ø 6.35
Size
Piping Gas mm ø 9.52 ø 9.52
Connections Method Indoor / Outdoor - Flared / Flared Flared / Flared
Drain Hose Size O.D, I.D mm 21.5, 16.0 21.5, 16.0
Min / Standard / Max m 3.6 / 7.5 / 15 3.6 / 7.5 / 15
Between Piping Length
No Charge m 7.5 7.5
Indoor &
Outdoor Max. Elevation Difference m 7 7
Piping Connection Heat Insulation - Both liquid and gas pipes Both liquid and gas pipes
Type - R410A R410A
Pre Charge g 850 870
Additional Charge g/m 20 20
Refrigerant
Control - Capillary Capillary
Global Warning Potential - 2087.5 2087.5
t-COဌ eq - 1.77 1.82
Defrost Method - - -
Tool Code (Chassis) Indoor / Outdoor - SJ / UA3 SJ / UA3
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

10
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM121C7.SJ0 VM121C6.SJ1
Model (VM121C7.NJ0 / VM121C7.UJ0) (VM121C6.NJ1 / VM121C6.UJ1)
Set (Indoor / Outdoor) Unit
Factory US-Q121J2P0 US-Q121J3W0
Model (USNQ121J2P0 / USUQ121J2P0) (USNQ121J3W0 / USUQ121J3W0)
Type - Twin Rotary Single Rotary
Model - GST102MAA GA092MCA
Motor Type - BLDC BLDC
Compressor Oil Type / Maker - POE (RB68A) / Sun Oil or Jx Nippon POE (RB68A) / Sun Oil or Jx Nippon
Oil Charge cc 280 310
O.L.P. Name - - -
Manufacturer / Country of Origin - LG Electronics / China LG Electronics / China
Type - Cross Flow Fan Cross Flow Fan
Fan(Indoor)
Motor Output W 30 30
Type - Propeller Fan Propeller Fan
Motor Type - BLDC BLDC
Fan
Motor Output W 43 43
(Outdoor)
Motor Insulation - Class E Class E
Motor Enclosure / Ingress Protection - TEAO / IPX5 TEAO / IP23
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 15 x 21FPI x 618) x 1 (ø7 x 2 x 15 x 21 x 616.8) x 1
(ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Evaporator (ø x Row x Column x FPI/FPDM x L) x Qty. #3 - -
(ø x Row x Column x FPI/FPDM x L) x Qty. #4 - -
Heat Corrosion Protection - PCM PCM
Exchanger Fin Type - Slit Slit
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 22 x 18FPI x 667) x 1 (ø7 x 2 x 22 x 18FPI x 667) x 1
Condenser (ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Corrosion Protection - Gold Gold
Fin Type - Louver Louver
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

11
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM092C6.SJ1 VM122C6.SJ1
Model (VM092C6.NJ1 / VM092C6.UJ1) (VM122C6.NJ1 / VM122C6.UJ1)
Set (Indoor / Outdoor) Unit
Factory US-Q092J3W0 US-Q122J3W0
Model (USNQ092J3W0 / USUQ092J3W0) (USNQ122J3W0 / USUQ122J3W0)
kW 1.03 2.70 3.31 1.03 3.52 3.81
Cooling Min ~ Rated ~ Max
Btu/h 3,500 9,200 11,300 3,500 12,000 13,000
kW - - - - - -
Cooling (T3) Min ~ Rated ~ Max
Capacity Btu/h - - - - - -
kW - - - - - -
Heating Min ~ Rated ~ Max
Btu/h - - - - - -
Heating -7 °C Rated kW - -
Cooling Min ~ Rated ~ Max W 158 825 1,170 158 1,170 1,280
Power Input Cooling (T3) Min ~ Rated ~ Max W - - - - - -
Heating Min ~ Rated ~ Max W - - - - - -
Cooling Min ~ Rated ~ Max A 0.90 4.50 6.00 0.90 6.20 7.20
Running Cooling (T3) Min ~ Rated ~ Max A - - - - - -
Current
Heating Min ~ Rated ~ Max A - - - - - -
W/W 3.27 3.01
EER
(Btu/h)/W 11.15 10.26
W/W - -
EER (T3)
(Btu/h)/W - -
SEER - - -
W/W - -
COP
(Btu/h)/W - -
SCOP - - -
Energy Label Grade Cooling / Heating - -/- -/-
Monthly Energy Consumption Cooling / Heating kWh/month -/- -/-
Power Supply Ø, V, Hz 1, 220, 50/60 1, 220, 50/60
Available Voltage Range V 187 ~ 253 187 ~ 253
Power Factor Cooling / Heating % 80 / - 80 / -
Moisture Removal l/h 0.80 0.80
Cooling, Max / H / M / L ໽/min 12.5 / 9.3 / 7.2 / 2.7 12.5 / 9.3 / 7.2 / 2.7
Air Flow Rate
Heating, Max / H / M / L ໽/min - -
Cooling, Max / H / M / L / SL dB(A) 47 / 41 / 36 / 28 / 21 47 / 41 / 36 / 28 / 21
Sound Pressure Level
Heating, Max / H / M / L dB(A) - -
Indoor Sound Power Level dB(A) - -
Dimensions Net mm 837 × 308 × 189 837 × 308 × 189
(W × H × D) Shipping mm 909 × 383 × 256 909 × 383 × 256
Net kg 8.5 8.5
Weight
Shipping kg 10.4 10.4
Exterior Color Code - Munsell 7.5BG 10/2 (RAL 9016) Munsell 7.5BG 10/2 (RAL 9016)
Air Flow Rate Max ໽/min 27.0 27.0
Cooling, Min ~ Max rpm - -
Fan Motor Speed
Heating, Min ~ Max rpm - -
Cooling, Rated dB(A) 51 51
Sound Pressure Level
Heating, Rated dB(A) - -
Sound Power Level dB(A) - -
Dimensions Net mm 717 × 483 × 230 717 × 483 × 230
Outdoor (W × H × D) Shipping mm 837 × 530.5 × 317 837 × 530.5 × 317
Net kg 23.2 24.3
Weight
Shipping kg 25.2 26.3
Max. Fuse Size A 15 15
Exterior Color Code - Munsell 9.54Y 8.34/1.31 (RAL 9001) Munsell 9.54Y 8.34/1.31 (RAL 9001)
Cooling ୅ DB 18 ~ 48 18 ~ 48
Operation Range Heating ୅ DB - -
Heating ୅ WB - -
Circuit Breaker A 15 15
Power Supply Cable No. × ༅ 3×1 3×1
Power Supply to Unit - Outdoor Outdoor
Power and Communication Cable No. × ༅ 4 × 0.75 4 × 0.75
Liquid mm ø 6.35 ø 6.35
Size
Piping Gas mm ø 9.52 ø 9.52
Connections Method Indoor / Outdoor - Flared / Flared Flared / Flared
Drain Hose Size O.D, I.D mm 21.5, 16.0 21.5, 16.0
Min / Standard / Max m 3.6 / 7.5 / 15 3.6 / 7.5 / 15
Between Piping Length
No Charge m 7.5 7.5
Indoor &
Outdoor Max. Elevation Difference m 7 7
Piping Connection Heat Insulation - Both liquid and gas pipes Both liquid and gas pipes
Type - R410A R410A
Pre Charge g 580 870
Additional Charge g/m 20 20
Refrigerant
Control - Capillary Capillary
Global Warning Potential - 2087.5 2087.5
t-COဌ eq - 1.21 1.82
Defrost Method - - -
Tool Code (Chassis) Indoor / Outdoor - SJ / UA3 SJ / UA3
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

12
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM092C6.SJ1 VM122C6.SJ1
Model (VM092C6.NJ1 / VM092C6.UJ1) (VM122C6.NJ1 / VM122C6.UJ1)
Set (Indoor / Outdoor) Unit
Factory US-Q092J3W0 US-Q122J3W0
Model (USNQ092J3W0 / USUQ092J3W0) (USNQ122J3W0 / USUQ122J3W0)
Type - Single Rotary Single Rotary
Model - GA092MCA GA092MCA
Motor Type - BLDC BLDC
Compressor Oil Type / Maker - POE (RB68A) / Sun Oil or Jx Nippon POE (RB68A) / Sun Oil or Jx Nippon
Oil Charge cc 310 310
O.L.P. Name - - -
Manufacturer / Country of Origin - LG Electronics / China LG Electronics / China
Type - Cross Flow Fan Cross Flow Fan
Fan(Indoor)
Motor Output W 30 30
Type - Propeller Fan Propeller Fan
Motor Type - AC AC
Fan
Motor Output W 25 25
(Outdoor)
Motor Insulation - Class E Class E
Motor Enclosure / Ingress Protection - TEAO / IP24 TEAO / IP24
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 15 x 21 x 616.8) x 1 (ø7 x 2 x 15 x 21 x 616.8) x 1
(ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Evaporator (ø x Row x Column x FPI/FPDM x L) x Qty. #3 - -
(ø x Row x Column x FPI/FPDM x L) x Qty. #4 - -
Heat Corrosion Protection - PCM PCM
Exchanger Fin Type - Slit Slit
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 1 x 22 x 21FPI x 667) x 1 (ø7 x 2 x 22 x 18FPI x 667) x 1
Condenser (ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Corrosion Protection - Gold Gold
Fin Type - Louver Louver
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

13
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM182C6.SK1 VM242C6.SK1
Model (VM182C6.NK1 / VM182C6.UK1) (VM242C6.NK1 / VM242C6.UK1)
Set (Indoor / Outdoor) Unit
Factory US-Q182K3W0 US-Q242K3W0
Model (USNQ182K3W0 / USUQ182K3W0) (USNQ242K3W0 / USUQ242K3W0)
kW 1.08 5.28 5.36 1.03 6.45 7.18
Cooling Min ~ Rated ~ Max
Btu/h 3,685 18,000 18,300 3,500 22,000 24,500
kW - - - - - -
Cooling (T3) Min ~ Rated ~ Max
Capacity Btu/h - - - - - -
kW - - - - - -
Heating Min ~ Rated ~ Max
Btu/h - - - - - -
Heating -7 °C Rated kW - -
Cooling Min ~ Rated ~ Max W 238 1,750 1,820 240 2,140 2,420
Power Input Cooling (T3) Min ~ Rated ~ Max W - - - - - -
Heating Min ~ Rated ~ Max W - - - - - -
Cooling Min ~ Rated ~ Max A 1.10 7.40 8.10 1.14 9.60 11.46
Running Cooling (T3) Min ~ Rated ~ Max A - - - - - -
Current
Heating Min ~ Rated ~ Max A - - - - - -
W/W 3.01 3.01
EER
(Btu/h)/W 10.29 10.28
W/W - -
EER (T3)
(Btu/h)/W - -
SEER - - -
W/W - -
COP
(Btu/h)/W - -
SCOP - - -
Energy Label Grade Cooling / Heating - -/- -/-
Monthly Energy Consumption Cooling / Heating kWh/month -/- -/-
Power Supply Ø, V, Hz 1, 220, 50/60 1, 220, 50/60
Available Voltage Range V 187 ~ 253 187 ~ 253
Power Factor Cooling / Heating % 95 / - 95 / -
Moisture Removal l/h 1.60 2.00
Cooling, Max / H / M / L ໽/min 19 / 13.5 / 12 / 9 21 / 15 / 12 / 9
Air Flow Rate
Heating, Max / H / M / L ໽/min - -
Cooling, Max / H / M / L / SL dB(A) 54 / 45 / 43 / 38 / 32 56 / 48 / 43 / 38 / 32
Sound Pressure Level
Heating, Max / H / M / L dB(A) - -
Indoor Sound Power Level dB(A) - -
Dimensions Net mm 998 × 345 × 210 998 × 345 × 210
(W × H × D) Shipping mm 1080 × 422 × 281 1080 × 422 × 281
Net kg 11.7 12.5
Weight
Shipping kg 13.6 14.6
Exterior Color Code - Munsell 7.5BG 10/2 (RAL 9016) Munsell 7.5BG 10/2 (RAL 9016)
Air Flow Rate Max ໽/min 38.0 50.0
Cooling, Min ~ Max rpm 200 ~ 900 190 ~ 840
Fan Motor Speed
Heating, Min ~ Max rpm - -
Cooling, Rated dB(A) 54 56
Sound Pressure Level
Heating, Rated dB(A) - -
Sound Power Level dB(A) - -
Dimensions Net mm 770 × 545 × 288 870 × 655 × 320
Outdoor (W × H × D) Shipping mm 925 × 593 × 393 1022 × 728.6 × 437
Net kg 32.5 41.0
Weight
Shipping kg 34.7 44.0
Max. Fuse Size A 15 20
Exterior Color Code - Munsell 9.54Y 8.34/1.31 (RAL 9001) Munsell 9.54Y 8.34/1.31 (RAL 9001)
Cooling ୅ DB 37.3-34.8 18 ~ 48
Operation Range Heating ୅ DB - -
Heating ୅ WB - -
Circuit Breaker A 20 20
Power Supply Cable No. × ༅ 3 × 1.5 3 × 1.5
Power Supply to Unit - Outdoor Outdoor
Power and Communication Cable No. × ༅ 4 × 0.75 4 × 0.75
Liquid mm ø 6.35 ø 6.35
Size
Piping Gas mm ø 12.7 ø 15.88
Connections Method Indoor / Outdoor - Flared / Flared Flared / Flared
Drain Hose Size O.D, I.D mm 21.5, 16.0 21.5, 16.0
Min / Standard / Max m 3.6 / 7.5 / 20 3.6 / 7.5 / 20
Between Piping Length
No Charge m 7.5 7.5
Indoor &
Outdoor Max. Elevation Difference m 10 10
Piping Connection Heat Insulation - Both liquid and gas pipes Both liquid and gas pipes
Type - R410A R410A
Pre Charge g 1310 1450
Additional Charge g/m 20 20
Refrigerant
Control - Capillary Capillary
Global Warning Potential - 2087.5 2087.5
t-COဌ eq - 2.73 3.03
Defrost Method - - -
Tool Code (Chassis) Indoor / Outdoor - SK / UL2 SK / UE
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

14
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM182C6.SK1 VM242C6.SK1
Model (VM182C6.NK1 / VM182C6.UK1) (VM242C6.NK1 / VM242C6.UK1)
Set (Indoor / Outdoor) Unit
Factory US-Q182K3W0 US-Q242K3W0
Model (USNQ182K3W0 / USUQ182K3W0) (USNQ242K3W0 / USUQ242K3W0)
Type - Twin Rotary Twin Rotary
Model - GAT156MAD GAT156MAD
Motor Type - BLDC BLDC
Compressor Oil Type / Maker - POE (RB68A) / Sun Oil or Jx Nippon POE (RB68A) / Sun Oil or Jx Nippon
Oil Charge cc 400 400
O.L.P. Name - - -
Manufacturer / Country of Origin - LG Electronics / China LG Electronics / China
Type - Cross Flow Fan Cross Flow Fan
Fan(Indoor)
Motor Output W 30 58
Type - Propeller Fan Propeller Fan
Motor Type - BLDC BLDC
Fan
Motor Output W 43 85
(Outdoor)
Motor Insulation - Class E Class E
Motor Enclosure / Ingress Protection - TEAO / IPX4 TEAO / IPX5
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 16 x 20FPI x 744) x 1 (ø7 x 2 x 16 x 20FPI x 744) x 1
(ø x Row x Column x FPI/FPDM x L) x Qty. #2 - (ø5 x 1 x 4 x 22FPI x 744) x 2
Evaporator (ø x Row x Column x FPI/FPDM x L) x Qty. #3 - -
(ø x Row x Column x FPI/FPDM x L) x Qty. #4 - -
Heat Corrosion Protection - PCM PCM
Exchanger Fin Type - Slit Slit
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 24 x 18FPI x 823) x 1 (ø7 x 2 x 28 x 18FPI x 831.5) x 1
Condenser (ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Corrosion Protection - Gold Gold
Fin Type - Louver Louver
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

15
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VR092C7.SJ0 VR122C7.SJ0
Model (VR092C7.NJ0 / VR092C7.UJ0) (VR122C7.NJ0 / VR122C7.UJ0)
Set (Indoor / Outdoor) Unit
Factory US-Q092JRP0 US-Q122JRP0
Model (USNQ092JRP0 / USUQ092JRP0) (USNQ122JRP0 / USUQ122JRP0)
kW 0.70 2.70 3.52 0.70 3.52 4.04
Cooling Min ~ Rated ~ Max
Btu/h 2,400 9,200 12,000 2,400 12,000 13,800
kW - - - - - -
Cooling (T3) Min ~ Rated ~ Max
Capacity Btu/h - - - - - -
kW - - - - - -
Heating Min ~ Rated ~ Max
Btu/h - - - - - -
Heating -7 °C Rated kW - -
Cooling Min ~ Rated ~ Max W 160 770 1,300 160 1,080 1,450
Power Input Cooling (T3) Min ~ Rated ~ Max W - - - - - -
Heating Min ~ Rated ~ Max W - - - - - -
Cooling Min ~ Rated ~ Max A 0.70 3.50 6.20 0.70 4.80 6.50
Running Cooling (T3) Min ~ Rated ~ Max A - - - - - -
Current
Heating Min ~ Rated ~ Max A - - - - - -
W/W 3.50 3.26
EER
(Btu/h)/W 11.95 11.11
W/W - -
EER (T3)
(Btu/h)/W - -
SEER - - -
W/W - -
COP
(Btu/h)/W - -
SCOP - - -
Energy Label Grade Cooling / Heating - B/- C/-
Monthly Energy Consumption Cooling / Heating kWh/month 97.03 / - 133.28 / -
Power Supply Ø, V, Hz 1, 220, 50/60 1, 220, 50/60
Available Voltage Range V 187 ~ 253 187 ~ 253
Power Factor Cooling / Heating % 97.5 / - 97.5 / -
Moisture Removal l/h 0.80 0.80
Cooling, Max / H / M / L ໽/min 12.5 / 9.3 / 7.2 / 2.7 12.5 / 9.3 / 7.2 / 2.7
Air Flow Rate
Heating, Max / H / M / L ໽/min - -
Cooling, Max / H / M / L / SL dB(A) 47 / 41 / 36 / 28 / 21 47 / 41 / 36 / 28 / 21
Sound Pressure Level
Heating, Max / H / M / L dB(A) - -
Indoor Sound Power Level dB(A) - -
Dimensions Net mm 837 × 308 × 192 837 × 308 × 192
(W × H × D) Shipping mm 914 × 388 × 261 914 × 388 × 261
Net kg 9.7 9.7
Weight
Shipping kg 12.0 12.0
Exterior Color Code - Munsell 7.5PB 0.2/20 (RAL 9005) Munsell 7.5PB 0.2/20 (RAL 9005)
Air Flow Rate Max ໽/min 27.0 27.0
Cooling, Min ~ Max rpm 260 ~ 1000 260 ~ 1000
Fan Motor Speed
Heating, Min ~ Max rpm - -
Cooling, Rated dB(A) 51 51
Sound Pressure Level
Heating, Rated dB(A) - -
Sound Power Level dB(A) - -
Dimensions Net mm 717 × 483 × 230 717 × 483 × 230
Outdoor (W × H × D) Shipping mm 837 × 530.5 × 317 837 × 530.5 × 317
Net kg 24.6 24.6
Weight
Shipping kg 26.5 26.5
Max. Fuse Size A 20 20
Exterior Color Code - Munsell 9.54Y 8.34/1.31 (RAL 9001) Munsell 9.54Y 8.34/1.31 (RAL 9001)
Cooling ୅ DB 18 ~ 48 18 ~ 48
Operation Range Heating ୅ DB - -
Heating ୅ WB - -
Circuit Breaker A 15 15
Power Supply Cable No. × ༅ 3×1 3×1
Power Supply to Unit - Outdoor Outdoor
Power and Communication Cable No. × ༅ 4 × 0.75 4 × 0.75
Liquid mm ø 6.35 ø 6.35
Size
Piping Gas mm ø 9.52 ø 9.52
Connections Method Indoor / Outdoor - Flared / Flared Flared / Flared
Drain Hose Size O.D, I.D mm 21.5, 16.0 21.5, 16.0
Min / Standard / Max m 3.6 / 7.5 / 15 3.6 / 7.5 / 15
Between Piping Length
No Charge m 7.5 7.5
Indoor &
Outdoor Max. Elevation Difference m 7 7
Piping Connection Heat Insulation - Both liquid and gas pipes Both liquid and gas pipes
Type - R410A R410A
Pre Charge g 850 850
Additional Charge g/m 20 20
Refrigerant
Control - Capillary Capillary
Global Warning Potential - 2087.5 2087.5
t-COဌ eq - 1.77 1.77
Defrost Method - - -
Tool Code (Chassis) Indoor / Outdoor - SJ / UA3 SJ / UA3
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

16
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VR092C7.SJ0 VR122C7.SJ0
Model (VR092C7.NJ0 / VR092C7.UJ0) (VR122C7.NJ0 / VR122C7.UJ0)
Set (Indoor / Outdoor) Unit
Factory US-Q092JRP0 US-Q122JRP0
Model (USNQ092JRP0 / USUQ092JRP0) (USNQ122JRP0 / USUQ122JRP0)
Type - Twin Rotary Twin Rotary
Model - GST102MAA GST102MAA
Motor Type - BLDC BLDC
Compressor Oil Type / Maker - POE (RB68A) / Sun Oil or Jx Nippon POE (RB68A) / Sun Oil or Jx Nippon
Oil Charge cc 280 280
O.L.P. Name - - -
Manufacturer / Country of Origin - LG Electronics / China LG Electronics / China
Type - Cross Flow Fan Cross Flow Fan
Fan(Indoor)
Motor Output W 30 30
Type - Propeller Fan Propeller Fan
Motor Type - BLDC BLDC
Fan
Motor Output W 43 43
(Outdoor)
Motor Insulation - Class E Class E
Motor Enclosure / Ingress Protection - TEAO / IPX5 TEAO / IPX5
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 15 x 21FPI x 618) x 1 (ø7 x 2 x 15 x 21FPI x 618) x 1
(ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Evaporator (ø x Row x Column x FPI/FPDM x L) x Qty. #3 - -
(ø x Row x Column x FPI/FPDM x L) x Qty. #4 - -
Heat Corrosion Protection - PCM PCM
Exchanger Fin Type - Slit Slit
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 22 x 18FPI x 667) x 1 (ø7 x 2 x 22 x 18FPI x 667) x 1
Condenser (ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Corrosion Protection - Gold Gold
Fin Type - Louver Louver
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

17
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VR182C7.SK0 VR242C7.SK0
Model (VR182C7.NK0 / VR182C7.UK0) (VR242C7.NK0 / VR242C7.UK0)
Set (Indoor / Outdoor) Unit
Factory US-Q182KRP0 US-Q242KRP0
Model (USNQ182KRP0 / USUQ182KRP0) (USNQ242KRP0 / USUQ242KRP0)
kW 1.08 5.28 5.36 1.03 6.45 7.18
Cooling Min ~ Rated ~ Max
Btu/h 3,685 18,000 18,300 3,500 22,000 24,500
kW - - - - - -
Cooling (T3) Min ~ Rated ~ Max
Capacity Btu/h - - - - - -
kW - - - - - -
Heating Min ~ Rated ~ Max
Btu/h - - - - - -
Heating -7 °C Rated kW - -
Cooling Min ~ Rated ~ Max W 238 1,620 1,710 240 1,980 2,400
Power Input Cooling (T3) Min ~ Rated ~ Max W - - - - - -
Heating Min ~ Rated ~ Max W - - - - - -
Cooling Min ~ Rated ~ Max A 1.10 7.00 8.10 1.40 8.20 10.50
Running Cooling (T3) Min ~ Rated ~ Max A - - - - - -
Current
Heating Min ~ Rated ~ Max A - - - - - -
W/W 3.26 3.26
EER
(Btu/h)/W 11.11 11.11
W/W - -
EER (T3)
(Btu/h)/W - -
SEER - - -
W/W - -
COP
(Btu/h)/W - -
SCOP - - -
Energy Label Grade Cooling / Heating - C/- C/-
Monthly Energy Consumption Cooling / Heating kWh/month 201.26 / - 244.5 / -
Power Supply Ø, V, Hz 1, 220, 50/60 1, 220, 50/60
Available Voltage Range V 187 ~ 253 187 ~ 253
Power Factor Cooling / Heating % 96 / - 98.1 / -
Moisture Removal l/h 1.60 1.90
Cooling, Max / H / M / L ໽/min 19 / 13.5 / 12 / 9 20 / 15 / 13.5 / 10.5
Air Flow Rate
Heating, Max / H / M / L ໽/min - -
Cooling, Max / H / M / L / SL dB(A) 51 / 44 / 42 / 37 / 31 52 / 47 / 42 / 38 / 31
Sound Pressure Level
Heating, Max / H / M / L dB(A) - -
Indoor Sound Power Level dB(A) - -
Dimensions Net mm 998 × 345 × 212 998 × 345 × 212
(W × H × D) Shipping mm 1085 × 427 × 286 1085 × 427 × 286
Net kg 12.9 14.3
Weight
Shipping kg 16.0 17.3
Exterior Color Code - Munsell 7.5PB 0.2/20 (RAL 9005) Munsell 7.5PB 0.2/20 (RAL 9005)
Air Flow Rate Max ໽/min 38.0 49.0
Cooling, Min ~ Max rpm 200 ~ 900 190 ~ 840
Fan Motor Speed
Heating, Min ~ Max rpm - -
Cooling, Rated dB(A) 54 55
Sound Pressure Level
Heating, Rated dB(A) - -
Sound Power Level dB(A) - -
Dimensions Net mm 770 × 545 × 288 870 × 650 × 330
Outdoor (W × H × D) Shipping mm 925 × 593 × 393 1041 × 693 × 456
Net kg 32.5 42.0
Weight
Shipping kg 35.2 46.0
Max. Fuse Size A 15 20
Exterior Color Code - Munsell 9.54Y 8.34/1.31 (RAL 9001) Munsell 9.54Y 8.34/1.31 (RAL 9001)
Cooling ୅ DB 18 ~ 48 18 ~ 48
Operation Range Heating ୅ DB - -
Heating ୅ WB - -
Circuit Breaker A 20 20
Power Supply Cable No. × ༅ 3 × 1.5 3 × 1.5
Power Supply to Unit - Outdoor Outdoor
Power and Communication Cable No. × ༅ 4 × 0.75 4 × 0.75
Liquid mm ø 6.35 ø 6.35
Size
Piping Gas mm ø 12.7 ø 15.88
Connections Method Indoor / Outdoor - Flared / Flared Flared / Flared
Drain Hose Size O.D, I.D mm 21.5, 16.0 21.5, 16.0
Min / Standard / Max m 3.6 / 7.5 / 20 3.6 / 7.5 / 20
Between Piping Length
No Charge m 7.5 7.5
Indoor &
Outdoor Max. Elevation Difference m 10 10
Piping Connection Heat Insulation - Both liquid and gas pipes Both liquid and gas pipes
Type - R410A R410A
Pre Charge g 1230 1400
Additional Charge g/m 20 20
Refrigerant
Control - Capillary Capillary
Global Warning Potential - 2087.5 2087.5
t-COဌ eq - 2.57 2.92
Defrost Method - - -
Tool Code (Chassis) Indoor / Outdoor - SK / UL2 SK / U24A
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

18
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VR182C7.SK0 VR242C7.SK0
Model (VR182C7.NK0 / VR182C7.UK0) (VR242C7.NK0 / VR242C7.UK0)
Set (Indoor / Outdoor) Unit
Factory US-Q182KRP0 US-Q242KRP0
Model (USNQ182KRP0 / USUQ182KRP0) (USNQ242KRP0 / USUQ242KRP0)
Type - Twin Rotary Twin Rotary
Model - GAT156MAD GAT156MAD
Motor Type - BLDC BLDC
Compressor Oil Type / Maker - POE (RB68A) / Sun Oil or Jx Nippon POE (RB68A) / Sun Oil or Jx Nippon
Oil Charge cc 400 400
O.L.P. Name - - -
Manufacturer / Country of Origin - LG Electronics / China LG Electronics / China
Type - Cross Flow Fan Cross Flow Fan
Fan(Indoor)
Motor Output W 58 58
Type - Propeller Fan Propeller Fan
Motor Type - BLDC BLDC
Fan
Motor Output W 43 70
(Outdoor)
Motor Insulation - Class E Class E
Motor Enclosure / Ingress Protection - TEAO / IPX4 TEAO / IPX5
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 16 x 20FPI x 744) x 1 (ø7 x 2 x 16 x 20FPI x 744) x 1
(ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Evaporator (ø x Row x Column x FPI/FPDM x L) x Qty. #3 - -
(ø x Row x Column x FPI/FPDM x L) x Qty. #4 - -
Heat Corrosion Protection - PCM PCM
Exchanger Fin Type - Slit Slit
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 24 x 18FPI x 823) x 1 (ø7 x 2 x 28 x 18FPI x 940) x 1
Condenser (ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Corrosion Protection - Gold Gold
Fin Type - Louver Louver
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

19
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM092C7.SS1 VM122C7.SS1
Model (VM092C7.NJA / VM092C7.UA1) (VM122C7.NJ1 / VM122C7.UA1)
Set (Indoor / Outdoor) Unit
Factory US-Q092J2P0 US-Q122J2P0
Model (USNQ092J2P0 / USUQ092J2P0) (USNQ122J2P0 / USUQ122J2P0)
kW 0.70 2.70 3.52 0.70 3.52 4.04
Cooling Min ~ Rated ~ Max
Btu/h 2,400 9,200 12,000 2,400 12,000 13,800
kW - - - - - -
Cooling (T3) Min ~ Rated ~ Max
Capacity Btu/h - - - - - -
kW - - - - - -
Heating Min ~ Rated ~ Max
Btu/h - - - - - -
Heating -7 °C Rated kW - -
Cooling Min ~ Rated ~ Max W 160 730 1,300 160 1,025 1,450
Power Input Cooling (T3) Min ~ Rated ~ Max W - - - - - -
Heating Min ~ Rated ~ Max W - - - - - -
Cooling Min ~ Rated ~ Max A 0.70 3.50 6.20 0.70 4.70 6.50
Running Cooling (T3) Min ~ Rated ~ Max A - - - - - -
Current
Heating Min ~ Rated ~ Max A - - - - - -
W/W 3.69 3.42
EER
(Btu/h)/W 12.60 11.71
W/W - -
EER (T3)
(Btu/h)/W - -
SEER - - -
W/W - -
COP
(Btu/h)/W - -
SCOP - - -
Energy Label Grade Cooling / Heating - A/- A/-
Annual Energy Consumption Cooling / Heating kWh/year 365 / - 512.5 / -
Power Supply Ø, V, Hz 1, 220, 50/60 1, 220, 50/60
Available Voltage Range V 187 ~ 253 187 ~ 253
Power Factor Cooling / Heating % 97.5 / - 97.5 / -
Moisture Removal l/h 0.80 0.80
Cooling, Max / H / M / L ໽/min 12.5 / 9.3 / 7.2 / 2.7 12.5 / 9.3 / 7.2 / 2.7
Air Flow Rate
Heating, Max / H / M / L ໽/min - -
Cooling, Max / H / M / L / SL dB(A) 47 / 41 / 36 / 28 / 21 47 / 41 / 36 / 28 / 21
Sound Pressure Level
Heating, Max / H / M / L dB(A) - -
Indoor Sound Power Level dB(A) - -
Dimensions Net mm 837 × 308 × 189 837 × 308 × 189
(W × H × D) Shipping mm 909 × 383 × 256 909 × 383 × 256
Net kg 8.8 8.8
Weight
Shipping kg 10.8 10.8
Exterior Color Code - Munsell 7.5BG 10/2 (RAL 9016) Munsell 7.5BG 10/2 (RAL 9016)
Air Flow Rate Max ໽/min 27.0 27.0
Cooling, Min ~ Max rpm 260 ~ 1000 260 ~ 1000
Fan Motor Speed
Heating, Min ~ Max rpm - -
Cooling, Rated dB(A) 51 51
Sound Pressure Level
Heating, Rated dB(A) - -
Sound Power Level dB(A) - -
Dimensions Net mm 717 × 483 × 230 717 × 483 × 230
Outdoor (W × H × D) Shipping mm 837 × 530.5 × 332 837 × 530.5 × 332
Net kg 24.6 24.6
Weight
Shipping kg 28.6 28.6
Max. Fuse Size A 20 20
Exterior Color Code - Munsell 9.54Y 8.34/1.31 (RAL 9001) Munsell 9.54Y 8.34/1.31 (RAL 9001)
Cooling ୅ DB 18 ~ 48 18 ~ 48
Operation Range Heating ୅ DB - -
Heating ୅ WB - -
Circuit Breaker A 15 15
Power Supply Cable No. × ༅ 3×1 3×1
Power Supply to Unit - Outdoor Outdoor
Power and Communication Cable No. × ༅ 4 × 0.75 4 × 0.75
Liquid mm ø 6.35 ø 6.35
Size
Piping Gas mm ø 9.52 ø 9.52
Connections Method Indoor / Outdoor - Flared / Flared Flared / Flared
Drain Hose Size O.D, I.D mm 21.5, 16.0 21.5, 16.0
Min / Standard / Max m 3.6 / 7.5 / 15 3.6 / 7.5 / 15
Between Piping Length
No Charge m 7.5 7.5
Indoor &
Outdoor Max. Elevation Difference m 7 7
Piping Connection Heat Insulation - Both liquid and gas pipes Both liquid and gas pipes
Type - R410A R410A
Pre Charge g 850 850
Additional Charge g/m 20 20
Refrigerant
Control - Capillary Capillary
Global Warning Potential - 2087.5 2087.5
t-COဌ eq - 1.77 1.77
Defrost Method - - -
Tool Code (Chassis) Indoor / Outdoor - SJ / UA3 SJ / UA3
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

20
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM092C7.SS1 VM122C7.SS1
Model (VM092C7.NJA / VM092C7.UA1) (VM122C7.NJ1 / VM122C7.UA1)
Set (Indoor / Outdoor) Unit US-Q092J2P0 US-Q122J2P0
Factory
Model (USNQ092J2P0 / USUQ092J2P0) (USNQ122J2P0 / USUQ122J2P0)
Type - Twin Rotary Twin Rotary
Model - GST102MAA GST102MAA
Motor Type - BLDC BLDC
Compressor Oil Type / Maker - POE (RB68A) / Sun Oil or Jx Nippon POE (RB68A) / Sun Oil or Jx Nippon
Oil Charge cc 280 280
O.L.P. Name - - -
Manufacturer / Country of Origin - LG Electronics / China LG Electronics / China
Type - Cross Flow Fan Cross Flow Fan
Fan(Indoor)
Motor Output W 30 30
Type - Propeller Fan Propeller Fan
Motor Type - BLDC BLDC
Fan
Motor Output W 43 43
(Outdoor)
Motor Insulation - Class E Class E
Motor Enclosure / Ingress Protection - TEAO / IPX5 TEAO / IPX5
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 15 x 21FPI x 618) x 1 (ø7 x 2 x 15 x 21FPI x 618) x 1
(ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Evaporator (ø x Row x Column x FPI/FPDM x L) x Qty. #3 - -
(ø x Row x Column x FPI/FPDM x L) x Qty. #4 - -
Heat Corrosion Protection - PCM PCM
Exchanger Fin Type - Slit Slit
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 22 x 18FPI x 667) x 1 (ø7 x 2 x 22 x 18FPI x 667) x 1
Condenser (ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Corrosion Protection - Gold Gold
Fin Type - Louver Louver
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

21
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM182C7.SS1 VM242C7.SS1
Model (VM182C7.NK1 / VM182C7.UL1) (VM242C7.NK1 / VM242C7.U21)
Set (Indoor / Outdoor) Unit
Factory US-Q182K2P0 US-Q242K2P0
Model (USNQ182K2P0 / USUQ182K2P0) (USNQ242K2P0 / USUQ242K2P0)
kW 1.08 5.28 5.36 1.03 6.45 7.18
Cooling Min ~ Rated ~ Max
Btu/h 3,685 18,000 18,300 3,500 22,000 24,500
kW - - - - - -
Cooling (T3) Min ~ Rated ~ Max
Capacity Btu/h - - - - - -
kW - - - - - -
Heating Min ~ Rated ~ Max
Btu/h - - - - - -
Heating -7 °C Rated kW - -
Cooling Min ~ Rated ~ Max W 238 1,540 1,710 240 1,880 2,400
Power Input Cooling (T3) Min ~ Rated ~ Max W - - - - - -
Heating Min ~ Rated ~ Max W - - - - - -
Cooling Min ~ Rated ~ Max A 1.10 7.00 8.10 1.40 8.20 10.50
Running Cooling (T3) Min ~ Rated ~ Max A - - - - - -
Current
Heating Min ~ Rated ~ Max A - - - - - -
W/W 3.42 3.42
EER
(Btu/h)/W 11.69 11.70
W/W - -
EER (T3)
(Btu/h)/W - -
SEER - - -
W/W - -
COP
(Btu/h)/W - -
SCOP - - -
Energy Label Grade Cooling / Heating - A/- A/-
Annual Energy Consumption Cooling / Heating kWh/year 770 / - 940 / -
Power Supply Ø, V, Hz 1, 220, 50/60 1, 220, 50/60
Available Voltage Range V 187 ~ 253 187 ~ 253
Power Factor Cooling / Heating % 96 / - 98.1 / -
Moisture Removal l/h 1.60 1.90
Cooling, Max / H / M / L ໽/min 19 / 13.5 / 12 / 9 20 / 15 / 13.5 / 10.5
Air Flow Rate
Heating, Max / H / M / L ໽/min - -
Cooling, Max / H / M / L / SL dB(A) 51 / 44 / 42 / 37 / 31 52 / 47 / 42 / 38 / 31
Sound Pressure Level
Heating, Max / H / M / L dB(A) - -
Indoor Sound Power Level dB(A) - -
Dimensions Net mm 998 × 345 × 210 998 × 345 × 210
(W × H × D) Shipping mm 1080 × 422 × 281 1080 × 422 × 281
Net kg 12.2 12.2
Weight
Shipping kg 14.6 14.6
Exterior Color Code - Munsell 7.5BG 10/2 (RAL 9016) Munsell 7.5BG 10/2 (RAL 9016)
Air Flow Rate Max ໽/min 38.0 49.0
Cooling, Min ~ Max rpm 200 ~ 900 190 ~ 840
Fan Motor Speed
Heating, Min ~ Max rpm - -
Cooling, Rated dB(A) 54 55
Sound Pressure Level
Heating, Rated dB(A) - -
Sound Power Level dB(A) - -
Dimensions Net mm 770 × 545 × 288 870 × 650 × 330
Outdoor (W × H × D) Shipping mm 925 × 593 × 393 1041 × 693 × 456
Net kg 32.5 42.0
Weight
Shipping kg 37.3 49.0
Max. Fuse Size A 15 20
Exterior Color Code - Munsell 9.54Y 8.34/1.31 (RAL 9001) Munsell 9.54Y 8.34/1.31 (RAL 9001)
Cooling ୅ DB 18 ~ 48 18 ~ 48
Operation Range Heating ୅ DB - -
Heating ୅ WB - -
Circuit Breaker A 20 20
Power Supply Cable No. × ༅ 3 × 1.5 3 × 1.5
Power Supply to Unit - Outdoor Outdoor
Power and Communication Cable No. × ༅ 4 × 0.75 4 × 0.75
Liquid mm ø 6.35 ø 6.35
Size
Piping Gas mm ø 12.7 ø 15.88
Connections Method Indoor / Outdoor - Flared / Flared Flared / Flared
Drain Hose Size O.D, I.D mm 21.5, 16.0 21.5, 16.0
Min / Standard / Max m 3.6 / 7.5 / 20 3.6 / 7.5 / 20
Between Piping Length
No Charge m 7.5 7.5
Indoor &
Outdoor Max. Elevation Difference m 10 10
Piping Connection Heat Insulation - Both liquid and gas pipes Both liquid and gas pipes
Type - R410A R410A
Pre Charge g 1230 1400
Additional Charge g/m 20 20
Refrigerant
Control - Capillary Capillary
Global Warning Potential - 2087.5 2087.5
t-COဌ eq - 2.57 2.92
Defrost Method - - -
Tool Code (Chassis) Indoor / Outdoor - SK / UL2 SK / U24A
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

22
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM182C7.SS1 VM242C7.SS1
Model (VM182C7.NK1 / VM182C7.UL1) (VM242C7.NK1 / VM242C7.U21)
Set (Indoor / Outdoor) Unit
Factory US-Q182K2P0 US-Q242K2P0
Model (USNQ182K2P0 / USUQ182K2P0) (USNQ242K2P0 / USUQ242K2P0)
Type - Twin Rotary Twin Rotary
Model - GAT156MAD GAT156MAD
Motor Type - BLDC BLDC
Compressor Oil Type / Maker - POE (RB68A) / Sun Oil or Jx Nippon POE (RB68A) / Sun Oil or Jx Nippon
Oil Charge cc 400 400
O.L.P. Name - - -
Manufacturer / Country of Origin - LG Electronics / China LG Electronics / China
Type - Cross Flow Fan Cross Flow Fan
Fan(Indoor)
Motor Output W 58 58
Type - Propeller Fan Propeller Fan
Motor Type - BLDC BLDC
Fan
Motor Output W 43 70
(Outdoor)
Motor Insulation - Class E Class E
Motor Enclosure / Ingress Protection - TEAO / IPX4 TEAO / IPX5
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 16 x 20FPI x 744) x 1 (ø7 x 2 x 16 x 20FPI x 744) x 1
(ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Evaporator (ø x Row x Column x FPI/FPDM x L) x Qty. #3 - -
(ø x Row x Column x FPI/FPDM x L) x Qty. #4 - -
Heat Corrosion Protection - PCM PCM
Exchanger Fin Type - Slit Slit
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 24 x 18FPI x 823) x 1 (ø7 x 2 x 28 x 18FPI x 940) x 1
Condenser (ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Corrosion Protection - Gold Gold
Fin Type - Louver Louver
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

23
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer
Model VM121C6.SS0 (VM121C6.NJ0 / VM121C6.US0)
Set (Indoor / Outdoor) Unit
Factory
Model US-Q121J3W0 (USNQ121J3W0 / USUQ121J3W0)
kW 1.03 3.52 3.81
Cooling Min ~ Rated ~ Max
Btu/h 3,500 12,000 13,000
kW - - -
Cooling (T3) Min ~ Rated ~ Max
Capacity Btu/h - - -
kW - - -
Heating Min ~ Rated ~ Max
Btu/h - - -
Heating -7 °C Rated kW -
Cooling Min ~ Rated ~ Max W 158 1,095 1,394
Power Input Cooling (T3) Min ~ Rated ~ Max W - - -
Heating Min ~ Rated ~ Max W - - -
Cooling Min ~ Rated ~ Max A 0.90 9.82 12.13
Running Cooling (T3) Min ~ Rated ~ Max A - - -
Current
Heating Min ~ Rated ~ Max A - - -
W/W 3.21
EER
(Btu/h)/W 10.96
W/W -
EER (T3)
(Btu/h)/W -
SEER - -
W/W -
COP
(Btu/h)/W -
SCOP - -
Energy Label Grade Cooling / Heating - A/-
Annual Energy Consumption Cooling / Heating kWh/year 547.5 / -
Power Supply Ø, V, Hz 1, 115, 50/60
Available Voltage Range V 98 ~ 132
Power Factor Cooling / Heating % 95 / -
Moisture Removal l/h 0.80
Cooling, Max / H / M / L ໽/min 12.5 / 9.3 / 7.2 / 2.7
Air Flow Rate
Heating, Max / H / M / L ໽/min -
Cooling, Max / H / M / L / SL dB(A) 47 / 41 / 36 / 28 / 21
Sound Pressure Level
Heating, Max / H / M / L dB(A) -
Indoor Sound Power Level dB(A) -
Dimensions Net mm 837 × 308 × 189
(W × H × D) Shipping mm 909 × 383 × 256
Net kg 8.5
Weight
Shipping kg 10.4
Exterior Color Code - Munsell 7.5BG 10/2 (RAL 9016)
Air Flow Rate Max ໽/min 27.0
Cooling, Min ~ Max rpm 260 ~ 1000
Fan Motor Speed
Heating, Min ~ Max rpm -
Cooling, Rated dB(A) 51
Sound Pressure Level
Heating, Rated dB(A) -
Sound Power Level dB(A) -
Dimensions Net mm 717 × 483 × 230
Outdoor (W × H × D) Shipping mm 837 × 530.5 × 332
Net kg 25.2
Weight
Shipping kg 29.1
Max. Fuse Size A 20
Exterior Color Code - Munsell 9.54Y 8.34/1.31 (RAL 9001)
Cooling ୅ DB 18 ~ 48
Operation Range Heating ୅ DB -
Heating ୅ WB -
Circuit Breaker A 20
Power Supply Cable No. × ༅ 3 × 1.5
Power Supply to Unit - Outdoor
Power and Communication Cable No. × ༅ 4 × 0.75
Liquid mm ø 6.35
Size
Piping Gas mm ø 9.52
Connections Method Indoor / Outdoor - Flared / Flared
Drain Hose Size O.D, I.D mm 21.5, 16.0
Min / Standard / Max m 3.6 / 7.5 / 15
Between Piping Length
No Charge m 7.5
Indoor &
Outdoor Max. Elevation Difference m 7
Piping Connection Heat Insulation - Both liquid and gas pipes
Type - R410A
Pre Charge g 870
Additional Charge g/m 20
Refrigerant
Control - Capillary
Global Warning Potential - 2087.5
t-COဌ eq - 1.82
Defrost Method - -
Tool Code (Chassis) Indoor / Outdoor - SJ / UA3
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

24
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer
Model VM121C6.SS0 (VM121C6.NJ0 / VM121C6.US0)
Set (Indoor / Outdoor) Unit
Factory
Model US-Q121J3W0 (USNQ121J3W0 / USUQ121J3W0)
Type - Single Rotary
Model - GA092MCA
Motor Type - BLDC
Compressor Oil Type / Maker - POE (RB68A) / Sun Oil or Jx Nippon
Oil Charge cc 310
O.L.P. Name - -
Manufacturer / Country of Origin - LG Electronics / China
Type - Cross Flow Fan
Fan(Indoor)
Motor Output W 30
Type - Propeller Fan
Motor Type - BLDC
Fan
Motor Output W 43
(Outdoor)
Motor Insulation - Class E
Motor Enclosure / Ingress Protection - TEAO / IP23
Material, Tube / Fin - Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 15 x 21 x 616.8) x 1
(ø x Row x Column x FPI/FPDM x L) x Qty. #2 -
Evaporator (ø x Row x Column x FPI/FPDM x L) x Qty. #3 -
(ø x Row x Column x FPI/FPDM x L) x Qty. #4 -
Heat Corrosion Protection - PCM
Exchanger Fin Type - Slit
Material, Tube / Fin - Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 22 x 18FPI x 667) x 1
Condenser (ø x Row x Column x FPI/FPDM x L) x Qty. #2 -
Corrosion Protection - Gold
Fin Type - Louver
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

25
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM092C6.SS0 VM122C6.SS0
Model (VM092C6.NJ0 / VM092C6.US0) (VM122C6.NJ0 / VM122C6.US0)
Set (Indoor / Outdoor) Unit
Factory US-Q092J3W0 US-Q122J3W0
Model (USNQ092J3W0 / USUQ092J3W0) (USNQ122J3W0 / USUQ122J3W0)
kW 1.03 2.70 2.93 1.03 3.52 3.81
Cooling Min ~ Rated ~ Max
Btu/h 3,500 9,200 10,000 3,500 12,000 13,000
kW - - - - - -
Cooling (T3) Min ~ Rated ~ Max
Capacity Btu/h - - - - - -
kW - - - - - -
Heating Min ~ Rated ~ Max
Btu/h - - - - - -
Heating -7 °C Rated kW - -
Cooling Min ~ Rated ~ Max W 158 810 1,280 158 1,095 1,280
Power Input Cooling (T3) Min ~ Rated ~ Max W - - - - - -
Heating Min ~ Rated ~ Max W - - - - - -
Cooling Min ~ Rated ~ Max A 0.90 4.50 7.20 0.90 6.20 7.20
Running Cooling (T3) Min ~ Rated ~ Max A - - - - - -
Current
Heating Min ~ Rated ~ Max A - - - - - -
W/W 3.33 3.21
EER
(Btu/h)/W 11.36 10.96
W/W - -
EER (T3)
(Btu/h)/W - -
SEER - - -
W/W - -
COP
(Btu/h)/W - -
SCOP - - -
Energy Label Grade Cooling / Heating - A/- A/-
Annual Energy Consumption Cooling / Heating kWh/year 405 / - 547.5 / -
Power Supply Ø, V, Hz 1, 220, 50/60 1, 220, 50/60
Available Voltage Range V 187 ~ 253 187 ~ 253
Power Factor Cooling / Heating % 80 / - 80 / -
Moisture Removal l/h 0.80 0.80
Cooling, Max / H / M / L ໽/min 12.5 / 9.3 / 7.2 / 2.7 12.5 / 9.3 / 7.2 / 2.7
Air Flow Rate
Heating, Max / H / M / L ໽/min - -
Cooling, Max / H / M / L / SL dB(A) 47 / 41 / 36 / 28 / 21 47 / 41 / 36 / 28 / 21
Sound Pressure Level
Heating, Max / H / M / L dB(A) - -
Indoor Sound Power Level dB(A) - -
Dimensions Net mm 837 × 308 × 189 837 × 308 × 189
(W × H × D) Shipping mm 909 × 383 × 256 909 × 383 × 256
Net kg 8.5 8.5
Weight
Shipping kg 10.4 10.4
Exterior Color Code - Munsell 7.5BG 10/2 (RAL 9016) Munsell 7.5BG 10/2 (RAL 9016)
Air Flow Rate Max ໽/min 27.0 27.0
Cooling, Min ~ Max rpm - -
Fan Motor Speed
Heating, Min ~ Max rpm - -
Cooling, Rated dB(A) 51 51
Sound Pressure Level
Heating, Rated dB(A) - -
Sound Power Level dB(A) - -
Dimensions Net mm 717 × 483 × 230 717 × 483 × 230
Outdoor (W × H × D) Shipping mm 837 × 530.5 × 332 837 × 530.5 × 332
Net kg 23.2 24.3
Weight
Shipping kg 27.2 28.3
Max. Fuse Size A 15 15
Exterior Color Code - Munsell 9.54Y 8.34/1.31 (RAL 9001) Munsell 9.54Y 8.34/1.31 (RAL 9001)
Cooling ୅ DB 18 ~ 48 18 ~ 48
Operation Range Heating ୅ DB - -
Heating ୅ WB - -
Circuit Breaker A 15 15
Power Supply Cable No. × ༅ 3×1 3×1
Power Supply to Unit - Outdoor Outdoor
Power and Communication Cable No. × ༅ 4 × 0.75 4 × 0.75
Liquid mm ø 6.35 ø 6.35
Size
Piping Gas mm ø 9.52 ø 9.52
Connections Method Indoor / Outdoor - Flared / Flared Flared / Flared
Drain Hose Size O.D, I.D mm 21.5, 16.0 21.5, 16.0
Min / Standard / Max m 3.6 / 7.5 / 15 3.6 / 7.5 / 15
Between Piping Length
No Charge m 7.5 7.5
Indoor &
Outdoor Max. Elevation Difference m 7 7
Piping Connection Heat Insulation - Both liquid and gas pipes Both liquid and gas pipes
Type - R410A R410A
Pre Charge g 580 870
Additional Charge g/m 20 20
Refrigerant
Control - Capillary Capillary
Global Warning Potential - 2087.5 2087.5
t-COဌ eq - 1.21 1.82
Defrost Method - - -
Tool Code (Chassis) Indoor / Outdoor - SJ / UA3 SJ / UA3
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

26
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM092C6.SS0 VM122C6.SS0
Model (VM092C6.NJ0 / VM092C6.US0) (VM122C6.NJ0 / VM122C6.US0)
Set (Indoor / Outdoor) Unit
Factory US-Q092J3W0 US-Q122J3W0
Model (USNQ092J3W0 / USUQ092J3W0) (USNQ122J3W0 / USUQ122J3W0)
Type - Single Rotary Single Rotary
Model - GA092MCA GA092MCA
Motor Type - BLDC BLDC
Compressor Oil Type / Maker - POE (RB68A) / Sun Oil or Jx Nippon POE (RB68A) / Sun Oil or Jx Nippon
Oil Charge cc 310 310
O.L.P. Name - - -
Manufacturer / Country of Origin - LG Electronics / China LG Electronics / China
Type - Cross Flow Fan Cross Flow Fan
Fan(Indoor)
Motor Output W 30 30
Type - Propeller Fan Propeller Fan
Motor Type - AC AC
Fan
Motor Output W 25 25
(Outdoor)
Motor Insulation - Class E Class E
Motor Enclosure / Ingress Protection - TEAO / IP24 TEAO / IP24
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 15 x 21 x 616.8) x 1 (ø7 x 2 x 15 x 21 x 616.8) x 1
(ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Evaporator (ø x Row x Column x FPI/FPDM x L) x Qty. #3 - -
(ø x Row x Column x FPI/FPDM x L) x Qty. #4 - -
Heat Corrosion Protection - PCM PCM
Exchanger Fin Type - Slit Slit
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 1 x 22 x 21FPI x 667) x 1 (ø7 x 2 x 22 x 18FPI x 667) x 1
Condenser (ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Corrosion Protection - Gold Gold
Fin Type - Louver Louver
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

27
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM182C6.SS2 VM242C6.SS0
Model (VM182C6.NK2 / VM182C6.US2) (VM242C6.NK0 / VM242C6.US0)
Set (Indoor / Outdoor) Unit
Factory US-Q182K3W2 US-Q242K3W0
Model (USNQ182K3W2 / USUQ182K3W2) (USNQ242K3W0 / USUQ242K3W0)
kW 1.08 5.28 5.36 1.03 6.45 7.18
Cooling Min ~ Rated ~ Max
Btu/h 3,685 18,000 18,300 3,500 22,000 24,500
kW - - - - - -
Cooling (T3) Min ~ Rated ~ Max
Capacity Btu/h - - - - - -
kW - - - - - -
Heating Min ~ Rated ~ Max
Btu/h - - - - - -
Heating -7 °C Rated kW - -
Cooling Min ~ Rated ~ Max W 238 1,640 1,710 240 2,010 2,420
Power Input Cooling (T3) Min ~ Rated ~ Max W - - - - - -
Heating Min ~ Rated ~ Max W - - - - - -
Cooling Min ~ Rated ~ Max A 1.10 7.40 8.10 1.14 9.60 11.46
Running Cooling (T3) Min ~ Rated ~ Max A - - - - - -
Current
Heating Min ~ Rated ~ Max A - - - - - -
W/W 3.22 3.21
EER
(Btu/h)/W 10.98 10.95
W/W - -
EER (T3)
(Btu/h)/W - -
SEER - - -
W/W - -
COP
(Btu/h)/W - -
SCOP - - -
Energy Label Grade Cooling / Heating - A/- A/-
Annual Energy Consumption Cooling / Heating kWh/year 820 / - 1005 / -
Power Supply Ø, V, Hz 1, 220, 50/60 1, 220, 50/60
Available Voltage Range V 187 ~ 253 187 ~ 253
Power Factor Cooling / Heating % 95 / - 95 / -
Moisture Removal l/h 1.60 2.00
Cooling, Max / H / M / L ໽/min 19 / 13.5 / 12 / 9 21 / 15 / 12 / 9
Air Flow Rate
Heating, Max / H / M / L ໽/min - -
Cooling, Max / H / M / L / SL dB(A) 54 / 45 / 43 / 38 / 32 56 / 48 / 43 / 38 / 32
Sound Pressure Level
Heating, Max / H / M / L dB(A) - -
Indoor Sound Power Level dB(A) - -
Dimensions Net mm 998 × 345 × 210 998 × 345 × 210
(W × H × D) Shipping mm 1080 × 422 × 281 1080 × 422 × 281
Net kg 11.7 12.5
Weight
Shipping kg 13.6 14.6
Exterior Color Code - Munsell 7.5BG 10/2 (RAL 9016) Munsell 7.5BG 10/2 (RAL 9016)
Air Flow Rate Max ໽/min 38.0 50.0
Cooling, Min ~ Max rpm 200 ~ 900 190 ~ 840
Fan Motor Speed
Heating, Min ~ Max rpm - -
Cooling, Rated dB(A) 54 56
Sound Pressure Level
Heating, Rated dB(A) - -
Sound Power Level dB(A) - -
Dimensions Net mm 770 × 545 × 288 870 × 655 × 320
Outdoor (W × H × D) Shipping mm 925 × 593 × 393 1022 × 728.6 × 437
Net kg 32.5 41.0
Weight
Shipping kg 37.3 47.0
Max. Fuse Size A 15 20
Exterior Color Code - Munsell 9.54Y 8.34/1.31 (RAL 9001) Munsell 9.54Y 8.34/1.31 (RAL 9001)
Cooling ୅ DB 18 ~ 48 18 ~ 48
Operation Range Heating ୅ DB - -
Heating ୅ WB - -
Circuit Breaker A 20 20
Power Supply Cable No. × ༅ 3 × 1.5 3 × 1.5
Power Supply to Unit - Outdoor Outdoor
Power and Communication Cable No. × ༅ 4 × 0.75 4 × 0.75
Liquid mm ø 6.35 ø 6.35
Size
Piping Gas mm ø 12.7 ø 15.88
Connections Method Indoor / Outdoor - Flared / Flared Flared / Flared
Drain Hose Size O.D, I.D mm 21.5, 16.0 21.5, 16.0
Min / Standard / Max m 3.6 / 7.5 / 20 3.6 / 7.5 / 20
Between Piping Length
No Charge m 7.5 7.5
Indoor &
Outdoor Max. Elevation Difference m 10 10
Piping Connection Heat Insulation - Both liquid and gas pipes Both liquid and gas pipes
Type - R410A R410A
Pre Charge g 1200 1450
Additional Charge g/m 20 20
Refrigerant
Control - Capillary Capillary
Global Warning Potential - 2087.5 2087.5
t-COဌ eq - 2.51 3.03
Defrost Method - - -
Tool Code (Chassis) Indoor / Outdoor - SK / UL2 SK / UE
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

28
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VM182C6.SS2 VM242C6.SS0
Model (VM182C6.NK2 / VM182C6.US2) (VM242C6.NK0 / VM242C6.US0)
Set (Indoor / Outdoor) Unit
Factory US-Q182K3W2 US-Q242K3W0
Model (USNQ182K3W2 / USUQ182K3W2) (USNQ242K3W0 / USUQ242K3W0)
Type - Twin Rotary Twin Rotary
Model - GAT156MAD GAT156MAD
Motor Type - BLDC BLDC
Compressor Oil Type / Maker - POE (RB68A) / Sun Oil or Jx Nippon POE (RB68A) / Sun Oil or Jx Nippon
Oil Charge cc 400 400
O.L.P. Name - - -
Manufacturer / Country of Origin - LG Electronics / China LG Electronics / China
Type - Cross Flow Fan Cross Flow Fan
Fan(Indoor)
Motor Output W 30 58
Type - Propeller Fan Propeller Fan
Motor Type - BLDC BLDC
Fan
Motor Output W 43 85
(Outdoor)
Motor Insulation - Class E Class E
Motor Enclosure / Ingress Protection - TEAO / IPX4 TEAO / IPX5
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 16 x 20FPI x 744) x 1 (ø7 x 2 x 16 x 20FPI x 744) x 1
(ø x Row x Column x FPI/FPDM x L) x Qty. #2 - (ø5 x 1 x 4 x 22FPI x 744) x 2
Evaporator (ø x Row x Column x FPI/FPDM x L) x Qty. #3 - -
(ø x Row x Column x FPI/FPDM x L) x Qty. #4 - -
Heat Corrosion Protection - PCM PCM
Exchanger Fin Type - Slit Slit
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 24 x 18FPI x 823) x 1 (ø7 x 2 x 28 x 18FPI x 831.5) x 1
Condenser (ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Corrosion Protection - Gold Gold
Fin Type - Louver Louver
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

29
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VR092C7.SS1 VR122C7.SS1
Model (VR092C7.NJ1 / VR092C7.UA1) (VR122C7.NJ1 / VR122C7.UA1)
Set (Indoor / Outdoor) Unit
Factory US-Q092JRP0 US-Q122JRP0
Model (USNQ092JRP0 / USUQ092JRP0) (USNQ122JRP0 / USUQ122JRP0)
kW 0.70 2.70 3.52 0.70 3.52 4.04
Cooling Min ~ Rated ~ Max
Btu/h 2,400 9,200 12,000 2,400 12,000 13,800
kW - - - - - -
Cooling (T3) Min ~ Rated ~ Max
Capacity Btu/h - - - - - -
kW - - - - - -
Heating Min ~ Rated ~ Max
Btu/h - - - - - -
Heating -7 °C Rated kW - -
Cooling Min ~ Rated ~ Max W 160 730 1,300 160 1,025 1,450
Power Input Cooling (T3) Min ~ Rated ~ Max W - - - - - -
Heating Min ~ Rated ~ Max W - - - - - -
Cooling Min ~ Rated ~ Max A 0.70 3.50 6.20 0.70 4.70 6.50
Running Cooling (T3) Min ~ Rated ~ Max A - - - - - -
Current
Heating Min ~ Rated ~ Max A - - - - - -
W/W 3.69 3.42
EER
(Btu/h)/W 12.60 11.71
W/W - -
EER (T3)
(Btu/h)/W - -
SEER - - -
W/W - -
COP
(Btu/h)/W - -
SCOP - - -
Energy Label Grade Cooling / Heating - A/- A/-
Annual Energy Consumption Cooling / Heating kWh/year 365 / - 512.5 / -
Power Supply Ø, V, Hz 1, 220, 50/60 1, 220, 50/60
Available Voltage Range V 187 ~ 253 187 ~ 253
Power Factor Cooling / Heating % 97.5 / - 97.5 / -
Moisture Removal l/h 0.80 0.80
Cooling, Max / H / M / L ໽/min 12.5 / 9.3 / 7.2 / 2.7 12.5 / 9.3 / 7.2 / 2.7
Air Flow Rate
Heating, Max / H / M / L ໽/min - -
Cooling, Max / H / M / L / SL dB(A) 47 / 41 / 36 / 28 / 21 47 / 41 / 36 / 28 / 21
Sound Pressure Level
Heating, Max / H / M / L dB(A) - -
Indoor Sound Power Level dB(A) - -
Dimensions Net mm 837 × 308 × 192 837 × 308 × 192
(W × H × D) Shipping mm 914 × 388 × 261 914 × 388 × 261
Net kg 9.7 9.7
Weight
Shipping kg 12.0 12.0
Exterior Color Code - Munsell 7.5PB 0.2/20 (RAL 9005) Munsell 7.5PB 0.2/20 (RAL 9005)
Air Flow Rate Max ໽/min 27.0 27.0
Cooling, Min ~ Max rpm 260 ~ 1000 260 ~ 1000
Fan Motor Speed
Heating, Min ~ Max rpm - -
Cooling, Rated dB(A) 51 51
Sound Pressure Level
Heating, Rated dB(A) - -
Sound Power Level dB(A) - -
Dimensions Net mm 717 × 483 × 230 717 × 483 × 230
Outdoor (W × H × D) Shipping mm 837 × 530.5 × 332 837 × 530.5 × 332
Net kg 24.6 24.6
Weight
Shipping kg 28.6 28.6
Max. Fuse Size A 20 20
Exterior Color Code - Munsell 9.54Y 8.34/1.31 (RAL 9001) Munsell 9.54Y 8.34/1.31 (RAL 9001)
Cooling ୅ DB 18 ~ 48 18 ~ 48
Operation Range Heating ୅ DB - -
Heating ୅ WB - -
Circuit Breaker A 15 15
Power Supply Cable No. × ༅ 3×1 3×1
Power Supply to Unit - Outdoor Outdoor
Power and Communication Cable No. × ༅ 4 × 0.75 4 × 0.75
Liquid mm ø 6.35 ø 6.35
Size
Piping Gas mm ø 9.52 ø 9.52
Connections Method Indoor / Outdoor - Flared / Flared Flared / Flared
Drain Hose Size O.D, I.D mm 21.5, 16.0 21.5, 16.0
Min / Standard / Max m 3.6 / 7.5 / 15 3.6 / 7.5 / 15
Between Piping Length
No Charge m 7.5 7.5
Indoor &
Outdoor Max. Elevation Difference m 7 7
Piping Connection Heat Insulation - Both liquid and gas pipes Both liquid and gas pipes
Type - R410A R410A
Pre Charge g 850 850
Additional Charge g/m 20 20
Refrigerant
Control - Capillary Capillary
Global Warning Potential - 2087.5 2087.5
t-COဌ eq - 1.77 1.77
Defrost Method - - -
Tool Code (Chassis) Indoor / Outdoor - SJ / UA3 SJ / UA3
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

30
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VR092C7.SS1 VR122C7.SS1
Model (VR092C7.NJ1 / VR092C7.UA1) (VR122C7.NJ1 / VR122C7.UA1)
Set (Indoor / Outdoor) Unit
Factory US-Q092JRP0 US-Q122JRP0
Model (USNQ092JRP0 / USUQ092JRP0) (USNQ122JRP0 / USUQ122JRP0)
Type - Twin Rotary Twin Rotary
Model - GST102MAA GST102MAA
Motor Type - BLDC BLDC
Compressor Oil Type / Maker - POE (RB68A) / Sun Oil or Jx Nippon POE (RB68A) / Sun Oil or Jx Nippon
Oil Charge cc 280 280
O.L.P. Name - - -
Manufacturer / Country of Origin - LG Electronics / China LG Electronics / China
Type - Cross Flow Fan Cross Flow Fan
Fan(Indoor)
Motor Output W 30 30
Type - Propeller Fan Propeller Fan
Motor Type - BLDC BLDC
Fan
Motor Output W 43 43
(Outdoor)
Motor Insulation - Class E Class E
Motor Enclosure / Ingress Protection - TEAO / IPX5 TEAO / IPX5
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 15 x 21FPI x 618) x 1 (Φ7 x 2 x 15 x 21FPI x 618) x 1
(ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Evaporator (ø x Row x Column x FPI/FPDM x L) x Qty. #3 - -
(ø x Row x Column x FPI/FPDM x L) x Qty. #4 - -
Heat Corrosion Protection - PCM PCM
Exchanger Fin Type - Slit Slit
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 22 x 18FPI x 667) x 1 (Φ7 x 2 x 22 x 18FPI x 667) x 1
Condenser (ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Corrosion Protection - Gold Gold
Fin Type - Louver Louver
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

31
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VR182C7.SS1 VR242C7.SS1
Model (VR182C7.NK1 / VR182C7.UL1) (VR242C7.NK1 / VR242C7.U21)
Set (Indoor / Outdoor) Unit
Factory US-Q182KRP0 US-Q242KRP0
Model (USNQ182KRP0 / USUQ182KRP0) (USNQ242KRP0 / USUQ242KRP0)
kW 1.08 5.28 5.36 1.03 6.45 7.18
Cooling Min ~ Rated ~ Max
Btu/h 3,685 18,000 18,300 3,500 22,000 24,500
kW - - - - - -
Cooling (T3) Min ~ Rated ~ Max
Capacity Btu/h - - - - - -
kW - - - - - -
Heating Min ~ Rated ~ Max
Btu/h - - - - - -
Heating -7 °C Rated kW - -
Cooling Min ~ Rated ~ Max W 238 1,540 1,710 240 1,880 2,400
Power Input Cooling (T3) Min ~ Rated ~ Max W - - - - - -
Heating Min ~ Rated ~ Max W - - - - - -
Cooling Min ~ Rated ~ Max A 1.10 7.00 8.10 1.40 8.20 10.50
Running Cooling (T3) Min ~ Rated ~ Max A - - - - - -
Current
Heating Min ~ Rated ~ Max A - - - - - -
W/W 3.42 3.42
EER
(Btu/h)/W 11.69 11.70
W/W - -
EER (T3)
(Btu/h)/W - -
SEER - - -
W/W - -
COP
(Btu/h)/W - -
SCOP - - -
Energy Label Grade Cooling / Heating - A/- A/-
Annual Energy Consumption Cooling / Heating kWh/year 770 / - 940 / -
Power Supply Ø, V, Hz 1, 220, 50/60 1, 220, 50/60
Available Voltage Range V 187 ~ 253 187 ~ 253
Power Factor Cooling / Heating % 96 / - 98.1 / -
Moisture Removal l/h 1.60 1.90
Cooling, Max / H / M / L ໽/min 19 / 13.5 / 12 / 9 20 / 15 / 13.5 / 10.5
Air Flow Rate
Heating, Max / H / M / L ໽/min - -
Cooling, Max / H / M / L / SL dB(A) 51 / 44 / 42 / 37 / 31 52 / 47 / 42 / 38 / 31
Sound Pressure Level
Heating, Max / H / M / L dB(A) - -
Indoor Sound Power Level dB(A) - -
Dimensions Net mm 998 × 345 × 212 998 × 345 × 212
(W × H × D) Shipping mm 1085 × 427 × 286 1085 × 427 × 286
Net kg 12.9 14.3
Weight
Shipping kg 16.0 17.3
Exterior Color Code - Munsell 7.5PB 0.2/20 (RAL 9005) Munsell 7.5PB 0.2/20 (RAL 9005)
Air Flow Rate Max ໽/min 38.0 49.0
Cooling, Min ~ Max rpm 200 ~ 900 190 ~ 840
Fan Motor Speed
Heating, Min ~ Max rpm - -
Cooling, Rated dB(A) 54 55
Sound Pressure Level
Heating, Rated dB(A) - -
Sound Power Level dB(A) - -
Dimensions Net mm 770 × 545 × 288 870 × 650 × 330
Outdoor (W × H × D) Shipping mm 925 × 593 × 393 1041 × 693 × 456
Net kg 32.5 42.0
Weight
Shipping kg 37.3 49.0
Max. Fuse Size A 15 20
Exterior Color Code - Munsell 9.54Y 8.34/1.31 (RAL 9001) Munsell 9.54Y 8.34/1.31 (RAL 9001)
Cooling ୅ DB 18 ~ 48 18 ~ 48
Operation Range Heating ୅ DB - -
Heating ୅ WB - -
Circuit Breaker A 20 20
Power Supply Cable No. × ༅ 3 × 1.5 3 × 1.5
Power Supply to Unit - Outdoor Outdoor
Power and Communication Cable No. × ༅ 4 × 0.75 4 × 0.75
Liquid mm ø 6.35 ø 6.35
Size
Piping Gas mm ø 12.7 ø 15.88
Connections Method Indoor / Outdoor - Flared / Flared Flared / Flared
Drain Hose Size O.D, I.D mm 21.5, 16.0 21.5, 16.0
Min / Standard / Max m 3.6 / 7.5 / 20 3.6 / 7.5 / 20
Between Piping Length
No Charge m 7.5 7.5
Indoor &
Outdoor Max. Elevation Difference m 10 10
Piping Connection Heat Insulation - Both liquid and gas pipes Both liquid and gas pipes
Type - R410A R410A
Pre Charge g 1230 1400
Additional Charge g/m 20 20
Refrigerant
Control - Capillary Capillary
Global Warning Potential - 2087.5 2087.5
t-COဌ eq - 2.57 2.92
Defrost Method - - -
Tool Code (Chassis) Indoor / Outdoor - SK / UL2 SK / U24A
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

32
Inverter Single Wall Mounted - 50/60 Hz (R410A)
3. Specifications
Buyer VR182C7.SS1 VR242C7.SS1
Model (VR182C7.NK1 / VR182C7.UL1) (VR242C7.NK1 / VR242C7.U21)
Set (Indoor / Outdoor) Unit
Factory US-Q182KRP0 US-Q242KRP0
Model (USNQ182KRP0 / USUQ182KRP0) (USNQ242KRP0 / USUQ242KRP0)
Type - Twin Rotary Twin Rotary
Model - GAT156MAD GAT156MAD
Motor Type - BLDC BLDC
Compressor Oil Type / Maker - POE (RB68A) / Sun Oil or Jx Nippon POE (RB68A) / Sun Oil or Jx Nippon
Oil Charge cc 400 400
O.L.P. Name - - -
Manufacturer / Country of Origin - LG Electronics / China LG Electronics / China
Type - Cross Flow Fan Cross Flow Fan
Fan(Indoor)
Motor Output W 58 58
Type - Propeller Fan Propeller Fan
Motor Type - BLDC BLDC
Fan
Motor Output W 43 70
(Outdoor)
Motor Insulation - Class E Class E
Motor Enclosure / Ingress Protection - TEAO / IPX4 TEAO / IPX5
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 16 x 20FPI x 744) x 1 (ø7 x 2 x 16 x 20FPI x 744) x 1
(ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Evaporator (ø x Row x Column x FPI/FPDM x L) x Qty. #3 - -
(ø x Row x Column x FPI/FPDM x L) x Qty. #4 - -
Heat Corrosion Protection - PCM PCM
Exchanger Fin Type - Slit Slit
Material, Tube / Fin - Cu / Al Cu / Al
(ø x Row x Column x FPI/FPDM x L) x Qty. #1 (ø7 x 2 x 24 x 18FPI x 823) x 1 (ø7 x 2 x 28 x 18FPI x 940) x 1
Condenser (ø x Row x Column x FPI/FPDM x L) x Qty. #2 - -
Corrosion Protection - Gold Gold
Fin Type - Louver Louver
Note • It may cause reliability, performance, noise, and vibration problem, unless
• – : No Relation meeting the range of connecting pipe length. Keep the minimum piping
• All power supply and communication cables and circuit breaker must comply with applicable local and national codes. length by making loops, although indoor unit and outdoor unit are close.
• Exterior color code is approximate value. • This product contains fluorinated greenhouse gases.
• It is difficult to measure air flow rate of sleep because of small values. • Some specifications may be changed without notifications due to our
• Maximum heating capacity is for heating operation without any frost. policy of innovation.
• Fan motor speed could vary ±20 rpm according to the operating conditions. • Test conditions are based on ISO 5151.

33
Inverter Single Wall Mounted - 50/60 Hz (R410A)
4. Function List
Category Function Description
Air Supply Outlet The number of air outlet from the indoor unit
Airflow Direction Control (Left & Right) Controlling a left-right direction of the indoor air flow
Airflow Direction Control (Up & Down) Controlling a up-down direction of the indoor air flow
Auto Swing (Left & Right) Auto swing air flow right and left for quick-cooling& Heating
Air
Auto Swing (Up & Down) Auto swing air flow up and down for quick-cooling& Heating
Flow
Fan Speed Steps (Fan / Cool / Heat) Step adjustable wind strength at each mode
Natural Wind (Auto Wind) Wind strength changes at regular intervals automatically
Jet Cool / Jet Heat (Power Wind) Wind strength is set to the maximum for 30 minutes
Comfort Air Set the vane to a preset position in order to make an indirect wind
Prefilter (Washable / Anti-Bacteria) Capture dust particles over 10μm in size and finer bacteria
Deodorizing Filter Deodorizing filter of the three techniques
Air
3M Micro Dust Filter Capture dust particles over 0.3μm in size
Purifying
3M Multi Protection Filter Capture micro-dust, viruses and allergens
Plasma Air Purifier (Ionizer) Reduce harmful microscopic particles and odor
Installation Drain Pump Water drain pump for indoor unit
Hot Start In the heating mode, the hot wind from the beginning
Self Diagnosis Self-diagnostic for product protection
Reliability
De-ice Control (Defrost) In the heating mode, de-icing of the outdoor heat exchanger automatically
Dry (Dehumidification) Operation Prevent the growth of mold by removing excess moisture from an area with high humidity
Auto Changeover Change the operation mode(cooling & heating) automatically to maintain the set temperature
Auto Operation (Artificial Intelligence) The fan and setting temperature adjust automatically, base on room temperature
Auto Cleaning (Coil Dry) Prevent the formation of bacteria and mold on the heat exchanger
Auto Restart Operation If power is resupplied after blackout, product restart automatically
Child Lock ¹ Only for wired-remote controller. Lock the buttons to prevent children control
Use the forced switch of the indoor unit to operate the air conditioner when the remote control is
Forced Operation unavailable
Group Control ¹ Only for wired-remote controller. Control multiple indoor units at the same time
Sleep Mode Set the off timer and fan speed is decreasing to make quiet environment for comfort sleep
Timer 24hr (On/Off) / 7hr (Off) Set the on/off timer
Timer (Weekly) ¹ Only for wired-remote controller. Set the on/off timer
If there is a temperature difference between room temperature and desired temperature, you
Two Thermistor Control ¹ can use this function in other to prevent insufficient cooling and insufficient heating
Convenience Low Ambient Operation The cooling operation is possible even in conditions of extreme cold
If there is a temperature difference between room temperature and desired temperature, you
Overheating Protection can use this function in other to prevent over-heating
Low Heating Using less energy helps keep the room warm when going out
Voice Control Customer can control the aircon by voice without wireless remote controller
Smart Scan (PIR) Adjust more energy saving and greater comfort air for detecting the human movement by sensor
LG AC Tag On (NFC) Check the your AC's operational information for quick-service and self-diagnosis by using NFC
Outdoor Silent Mode The overall sound level of the outdoor unit drops by up to 3dB
Mosquito Away An ultrasonic sound that mosquitoes detest is emitted to drives away mosquitoes
Check the your AC's operational information for quick-service and self-diagnosis by
Smart Diagnosis sound from indoor unit
Indoor Unit Display Type -
Indoor Unit Display Light Set the brightness of the display on the indoor unit
Energy Display Show the power consumption
Energy Saving Control the optimal desired temperature to save energy
Energy Active Energy Control (Watt Option) The customer can control the power consumption directly to save energy
Saving In areas where electricity is limited, customer can continue to use household appliances with the
Gen Mode air-conditioner by reducing power consumption
Individual Wired Remote Controller ² -
Control Handheld Wireless Controller -
General Central Controller (Non LGAP) -
CAC Network Solution (LGAP) -
Network Dry Contact ² -
Function PDI (Power Distribution Indicator) ² -
Outdoor Unit PI 485 ² -
Wi-Fi ² Easily access and control an air conditioner's functions from anywhere
Water Level Sensor Connection ² Detect the water level in drain pan
Wind Baffle Kit ² With wind baffle installed, the minimum temperature will be -18 ୅ (0 එ) D.B. in cooling
Special
Function Prevent the accumulation of freezing on the outdoor-heat-exchanger during winter (Flexible
Sump Heater Type)
Kit
Sheath Heater ² Prevent the accumulation of freezing on the outdoor-heat-exchanger during winter (Hard Type)
Crank Case Heater Pre-heating the compressor during winter
Smart Inverter Monitoring System (SIMs) ² Help you to easily monitor, diagnose the air conditioner and get a quick resolution
Mode Lock Set up the unit available to use only cooling or heating mode in the heat pump model
Others Temperature Control Basic cycle control method
DRED (Demand Response Enabling Device) -
Note
• These functions must be applied according to the model. Please refer to the following function list for each model.
• ¹ : This function can be operated only when the wired remote controller is connected. The applicability of each function depends on the above table.
• ² : Optional accessories must be purchased separately. If shown as "Embedded", this function is included in product.
• The function Wi-Fi is only compatible with 2.4 GHz band. (802.11 b/g/n)
• Some specifications may be changed without notifications due to our policy of innovation.

34
Inverter Single Wall Mounted - 50/60 Hz (R410A)
4. Function List
VM092C7.SJ0 VM122C7.SJ0 VM182C7.SK0 VM242C7.SK0
(US-Q092J2P0) (US-Q122J2P0) (US-Q182K2P0) (US-Q242K2P0) VM121C7.SJ0
Category Function
VM092C7.SS1 VM122C7.SS1 VM182C7.SS1 VM242C7.SS1 (US-Q121J2P0)
(US-Q092J2P0) (US-Q122J2P0) (US-Q182K2P0) (US-Q242K2P0)
Air Supply Outlet 1 1 1 1 1
Airflow Direction Control (Left & Right) 5 Steps 5 Steps 5 Steps 5 Steps 5 Steps
Airflow Direction Control (Up & Down) 6 Steps 6 Steps 6 Steps 6 Steps 6 Steps
Auto Swing (Left & Right) ̺ ̺ ̺ ̺ ̺
Air Flow Auto Swing (Up & Down) ̺ ̺ ̺ ̺ ̺
Fan Speed Steps (Fan / Cool / Heat) 6/6/X 6/6/X 6/6/X 6/6/X 6/6/X
Natural Wind (Auto Wind) ̺ ̺ ̺ ̺ ̺
Jet Cool / Jet Heat (Power Wind) ̺/X ̺/X ̺/X ̺/X ̺/X
Comfort Air X X X X X
Prefilter (Washable / Anti-Bacteria) ̺ ̺ ̺ ̺ ̺
Deodorizing Filter X X X X X
Air
3M Micro Dust Filter ̺ ̺ ̺ ̺ ̺
Purifying
3M Multi Protection Filter X X X X X
Plasma Air Purifier (Ionizer) ̺ ̺ ̺ ̺ ̺
Installation Drain Pump X X X X X
Hot Start X X X X X
Self Diagnosis ̺ ̺ ̺ ̺ ̺
Reliability
De-ice Control (Defrost) X X X X X
Dry (Dehumidification) Operation ̺ ̺ ̺ ̺ ̺
Auto Changeover X X X X X
Auto Operation (Artificial Intelligence) ̺ ̺ ̺ ̺ ̺
Auto Cleaning (Coil Dry) ̺ ̺ ̺ ̺ ̺
Auto Restart Operation ̺ ̺ ̺ ̺ ̺
Child Lock ¹ X X X X X
Forced Operation ̺ ̺ ̺ ̺ ̺
Group Control ¹ X X X X X
Sleep Mode Comfort Sleep (7hr) Comfort Sleep (7hr) Comfort Sleep (7hr) Comfort Sleep (7hr) Comfort Sleep (7hr)
Timer 24hr (On/Off) / 7hr (Off) ̺/X ̺/X ̺/X ̺/X ̺/X
Timer (Weekly) ¹ X X X X X
Two Thermistor Control ¹ X X X X X
Convenience Low Ambient Operation ̺ ̺ ̺ ̺ ̺
Overheating Protection X X X X X
Low Heating X X X X X
Voice Control X X X X X
Smart Scan (PIR) X X X X X
LG AC Tag On (NFC) X X X X X
Outdoor Silent Mode X X X X X
Mosquito Away X X X X X
Smart Diagnosis ̺ ̺ ̺ ̺ ̺
Indoor Unit Display Type Number Display Number Display Number Display Number Display Number Display
Indoor Unit Display Light On/Off On/Off On/Off On/Off On/Off
Energy Display ̺ ̺ ̺ ̺ ̺
Energy Saving ̺ ̺ ̺ ̺ ̺
Energy Active Energy Control (Watt Option) X X X X X
Saving
Gen Mode X X X X X
Wired Remote Controller (Premium) ² X X X X X
Wired Remote Controller (Standard) ² X X X X X
Wired Remote Controller (Simple with Mode Selection) ² X X X X X
Individual Wired Remote Controller (Simple without Mode Selection) ² X X X X X
Control
Handheld (See Remote Controller Section) AKB75215401 AKB75215401 AKB75215401 AKB75215401 AKB75215401
Wireless Setting Temperature Range (Cooling) 18~30 ୅ (64~86 එ) 18~30 ୅ (64~86 එ) 18~30 ୅ (64~86 එ) 18~30 ୅ (64~86 එ) 18~30 ୅ (64~86 එ)
Controller Setting Temperature Range (Heating) X X X X X
General Central Controller (Non LGAP) X X X X X
CAC Network Solution (LGAP) X X X X X
Network Dry Contact ² X X X X X
Function PDI (Power Distribution Indicator) ² X X X X X
Outdoor Unit PI 485 ² X X X X X
Wi-Fi ² Embedded Embedded Embedded Embedded Embedded
Water Level Sensor Connection ² X X X X X
Special Wind Baffle Kit ² X X X X X
Function Sump Heater X X X X X
Kit Sheath Heater ² X X X X X
Crank Case Heater X X X X X
Smart Inverter Monitoring System (SIMs) ² X X X X X
Mode Lock X X X X X
Others Temperature Control Thermistor Thermistor Thermistor Thermistor Thermistor
DRED (Demand Response Enabling Device) X X X X X
Note
• O : Applied, X : Not applied
• Filters are optional in some specific areas.
• ¹ : This function can be operated only when the wired remote controller is connected. The applicability of each function depends on the above table.
• ² : Optional accessories must be purchased separately. If shown as "Embedded", this function is included in product.
• The function Wi-Fi is only compatible with 2.4 GHz band. (802.11 b/g/n)
• Some specifications may be changed without notifications due to our policy of innovation.

35
Inverter Single Wall Mounted - 50/60 Hz (R410A)
4. Function List
VM092C6.SJ1 VM122C6.SJ1 VM182C6.SK1 VM242C6.SK1 VM121C6.SJ1
(US-Q092J3W0) (US-Q122J3W0) (US-Q182K3W0) (US-Q242K3W0) (US-Q121J3W0)
Category Function
VM092C6.SS0 VM122C6.SS0 VM182C6.SS2 VM242C6.SS0 VM121C6.SS0
(US-Q092J3W0) (US-Q122J3W0) (US-Q182K3W2) (US-Q242K3W0) (US-Q121J3W0)
Air Supply Outlet 1 1 1 1 1
Airflow Direction Control (Left & Right) Manual Manual Manual Manual Manual
Airflow Direction Control (Up & Down) 6 Steps 6 Steps 6 Steps 6 Steps 6 Steps
Auto Swing (Left & Right) X X X X X
Air Flow Auto Swing (Up & Down) ̺ ̺ ̺ ̺ ̺
Fan Speed Steps (Fan / Cool / Heat) 6/6/X 6/6/X 6/6/X 6/6/X 6/6/X
Natural Wind (Auto Wind) ̺ ̺ ̺ ̺ ̺
Jet Cool / Jet Heat (Power Wind) ̺/X ̺/X ̺/X ̺/X ̺/X
Comfort Air X X X X X
Prefilter (Washable / Anti-Bacteria) ̺ ̺ ̺ ̺ ̺
Deodorizing Filter X X X X X
Air
3M Micro Dust Filter ̺ ̺ ̺ ̺ ̺
Purifying
3M Multi Protection Filter X X X X X
Plasma Air Purifier (Ionizer) X X X X X
Installation Drain Pump X X X X X
Hot Start X X X X X
Self Diagnosis ̺ ̺ ̺ ̺ ̺
Reliability
De-ice Control (Defrost) X X X X X
Dry (Dehumidification) Operation ̺ ̺ ̺ ̺ ̺
Auto Changeover X X X X X
Auto Operation (Artificial Intelligence) ̺ ̺ ̺ ̺ ̺
Auto Cleaning (Coil Dry) ̺ ̺ ̺ ̺ ̺
Auto Restart Operation ̺ ̺ ̺ ̺ ̺
Child Lock ¹ X X X X X
Forced Operation ̺ ̺ ̺ ̺ ̺
Group Control ¹ X X X X X
Sleep Mode Comfort Sleep (7hr) Comfort Sleep (7hr) Comfort Sleep (7hr) Comfort Sleep (7hr) Comfort Sleep (7hr)
Timer 24hr (On/Off) / 7hr (Off) ̺/X ̺/X ̺/X ̺/X ̺/X
Timer (Weekly) ¹ X X X X X
Two Thermistor Control ¹ X X X X X
Convenience Low Ambient Operation X X ̺ ̺ X
Overheating Protection X X X X X
Low Heating X X X X X
Voice Control X X X X X
Smart Scan (PIR) X X X X X
LG AC Tag On (NFC) X X X X X
Outdoor Silent Mode X X X X X
Mosquito Away X X X X X
Smart Diagnosis ̺ ̺ ̺ ̺ ̺
Indoor Unit Display Type Number Display Number Display Number Display Number Display Number Display
Indoor Unit Display Light On/Off On/Off On/Off On/Off On/Off
Energy Display ̺ ̺ ̺ ̺ ̺
Energy Saving ̺ ̺ ̺ ̺ ̺
Energy Active Energy Control (Watt Option) X X X X X
Saving
Gen Mode X X X X X
Wired Remote Controller (Premium) ² X X X X X
Wired Remote Controller (Standard) ² X X X X X
Wired Remote Controller (Simple with Mode Selection) ² X X X X X
Individual Wired Remote Controller (Simple without Mode Selection) ² X X X X X
Control
Handheld (See Remote Controller Section) AKB74955617 AKB74955617 AKB74955617 AKB74955617 AKB74955617
Wireless Setting Temperature Range (Cooling) 18~30 ୅ (64~86 එ) 18~30 ୅ (64~86 එ) 18~30 ୅ (64~86 එ) 18~30 ୅ (64~86 එ) 18~30 ୅ (64~86 එ)
Controller Setting Temperature Range (Heating) X X X X X
General Central Controller (Non LGAP) X X X X X
CAC Network Solution (LGAP) X X X X X
Network Dry Contact ² X X X X X
Function PDI (Power Distribution Indicator) ² X X X X X
Outdoor Unit PI 485 ² X X X X X
Wi-Fi ² X X X X X
Water Level Sensor Connection ² X X X X X
Special Wind Baffle Kit ² X X X X X
Function Sump Heater X X X X X
Kit Sheath Heater ² X X X X X
Crank Case Heater X X X X X
Smart Inverter Monitoring System (SIMs) ² X X X X X
Mode Lock X X X X X
Others Temperature Control Thermistor Thermistor Thermistor Thermistor Thermistor
DRED (Demand Response Enabling Device) X X X X X
Note
• O : Applied, X : Not applied
• Filters are optional in some specific areas.
• ¹ : This function can be operated only when the wired remote controller is connected. The applicability of each function depends on the above table.
• ² : Optional accessories must be purchased separately. If shown as "Embedded", this function is included in product.
• The function Wi-Fi is only compatible with 2.4 GHz band. (802.11 b/g/n)
• Some specifications may be changed without notifications due to our policy of innovation.

36
Inverter Single Wall Mounted - 50/60 Hz (R410A)
4. Function List
VR092C7.SJ0 VR122C7.SJ0 VR182C7.SK0 VR242C7.SK0
(US-Q092JRP0) (US-Q122JRP0) (US-Q182KRP0) (US-Q242KRP0)
Category Function
VR092C7.SS1 VR122C7.SS1 VR182C7.SS1 VR242C7.SS1
(US-Q092JRP0) (US-Q122JRP0) (US-Q182KRP0) (US-Q242KRP0)
Air Supply Outlet 1 1 1 1
Airflow Direction Control (Left & Right) 5 Steps 5 Steps 5 Steps 5 Steps
Airflow Direction Control (Up & Down) 6 Steps 6 Steps 6 Steps 6 Steps
Auto Swing (Left & Right) ̺ ̺ ̺ ̺
Air Flow Auto Swing (Up & Down) ̺ ̺ ̺ ̺
Fan Speed Steps (Fan / Cool / Heat) 6/6/X 6/6/X 6/6/X 6/6/X
Natural Wind (Auto Wind) ̺ ̺ ̺ ̺
Jet Cool / Jet Heat (Power Wind) ̺/X ̺/X ̺/X ̺/X
Comfort Air X X X X
Prefilter (Washable / Anti-Bacteria) ̺ ̺ ̺ ̺
Deodorizing Filter X X X X
Air
3M Micro Dust Filter ̺ ̺ ̺ ̺
Purifying
3M Multi Protection Filter X X X X
Plasma Air Purifier (Ionizer) ̺ ̺ ̺ ̺
Installation Drain Pump X X X X
Hot Start X X X X
Self Diagnosis ̺ ̺ ̺ ̺
Reliability
De-ice Control (Defrost) X X X X
Dry (Dehumidification) Operation ̺ ̺ ̺ ̺
Auto Changeover X X X X
Auto Operation (Artificial Intelligence) ̺ ̺ ̺ ̺
Auto Cleaning (Coil Dry) ̺ ̺ ̺ ̺
Auto Restart Operation ̺ ̺ ̺ ̺
Child Lock ¹ X X X X
Forced Operation ̺ ̺ ̺ ̺
Group Control ¹ X X X X
Sleep Mode Comfort Sleep (7hr) Comfort Sleep (7hr) Comfort Sleep (7hr) Comfort Sleep (7hr)
Timer 24hr (On/Off) / 7hr (Off) ̺/X ̺/X ̺/X ̺/X
Timer (Weekly) ¹ X X X X
Two Thermistor Control ¹ X X X X
Convenience Low Ambient Operation ̺ ̺ ̺ ̺
Overheating Protection X X X X
Low Heating X X X X
Voice Control X X X X
Smart Scan (PIR) X X X X
LG AC Tag On (NFC) X X X X
Outdoor Silent Mode X X X X
Mosquito Away X X X X
Smart Diagnosis ̺ ̺ ̺ ̺
Indoor Unit Display Type Number Display Number Display Number Display Number Display
Indoor Unit Display Light On/Off On/Off On/Off On/Off
Energy Display ̺ ̺ ̺ ̺
Energy Saving ̺ ̺ ̺ ̺
Energy
Active Energy Control (Watt Option) X X X X
Saving
Gen Mode X X X X
Wired Remote Controller (Premium) ² X X X X
Wired Remote Controller (Standard) ² X X X X
Wired Remote Controller (Simple with Mode Selection) ² X X X X
Individual
Wired Remote Controller (Simple without Mode Selection) ² X X X X
Control
Handheld (See Remote Controller Section) AKB75215401 AKB75215401 AKB75215401 AKB75215401
Wireless Setting Temperature Range (Cooling) 18~30 ୅ (64~86 එ) 18~30 ୅ (64~86 එ) 18~30 ୅ (64~86 එ) 18~30 ୅ (64~86 එ)
Controller Setting Temperature Range (Heating) X X X X
General Central Controller (Non LGAP) X X X X
CAC Network Solution (LGAP) X X X X
Network Dry Contact ² X X X X
Function PDI (Power Distribution Indicator) ² X X X X
Outdoor Unit PI 485 ² X X X X
Wi-Fi ² Embedded Embedded Embedded Embedded
Water Level Sensor Connection ² X X X X
Special Wind Baffle Kit ² X X X X
Function Sump Heater X X X X
Kit Sheath Heater ² X X X X
Crank Case Heater X X X X
Smart Inverter Monitoring System (SIMs) ² X X X X
Mode Lock X X X X
Others Temperature Control Thermistor Thermistor Thermistor Thermistor
DRED (Demand Response Enabling Device) X X X X
Note
• O : Applied, X : Not applied
• Filters are optional in some specific areas.
• ¹ : This function can be operated only when the wired remote controller is connected. The applicability of each function depends on the above table.
• ² : Optional accessories must be purchased separately. If shown as "Embedded", this function is included in product.
• The function Wi-Fi is only compatible with 2.4 GHz band. (802.11 b/g/n)
• Some specifications may be changed without notifications due to our policy of innovation.

37
Unit : mm SJ Chassis

(767)
Air Intake Hole
5.1 Indoor Unit

Rear Rear

Left Right

(150)
Air Intake Hole
VM092C7, VM122C7, VM121C7

837 189 837


93 306 94
Air Intake 63
5. Dimensional Drawings

63

64
263
142 199
Inverter Single Wall Mounted - 50/60 Hz (R410A)

5
308

1 1 Ø65 Ø65

le
308

Ho
tlet
2

Ou
(5
56

56
23
23

Air 6)
9
(715) Air Outlet 98 134
51 Bottom 8 Unit Outline
Air Outlet Hole 152 194
51 Fixing the Installation Plate, Drilling Hole

50 26 837

In Case of Left Side Piping


62
31 34

152
6x3
4 Approx. 288 to gas pipe

61
33
59
3x6 1
Approx. 218 to liquid pipe

15
60
308

6 92
3
* If airflow direction control is available,
47

Up & Down Left & Right


38 132
Unit Outline
Cooling Heating Connecting Gas/Liquid Pipe

55° 55°
6 Decoration Cover
15° 5 Display & Remote Controller Signal Receiver
15°
4 Terminal Block for Power Supply and Communication
45° 3 Drain Hose Connection
2 Installation Plate
85° 1 Refrigerant, Drain Pipe and Cable Routing Hole Knock-out Type
No Name Description

38
39
Unit : mm SK Chassis

(918)
Air Intake Hole
Rear Rear
VM182C7, VM242C7

Left Right

(170)
Air Intake Hole
210 998
998
115 373 137
Air Intake
69

53
53
5. Dimensional Drawings

300
188

345
345

1 5 1 150

ole
Ø65 Ø65

tH
Inverter Single Wall Mounted - 50/60 Hz (R410A)

utle )
60
2

60
iA r O (74
11
27

27
Air 11
60 (872) Bottom Outlet 83 83
60 Unit Outline
Air Outlet Hole 134 150
Fixing the Installation Plate, Drilling Hole

998
50 26

62
31 34 In case of Left Side Piping

152
6x3
4

61
33
56
3x6
1 Approx. 240 to gas pipe

15
57
345

Approx. 160 to liquid pipe


90
6
3
63

* If airflow direction control is available,

Up & Down Left & Right 37 164


Unit Outline
Cooling Heating
Connecting Gas/Liquid Pipe

50° 50°
6 Decoration Cover
15° 5 Display & Remote Controller Signal Receiver
20°
4 Terminal Block for Power Supply and Communication
45° 3 Drain Hose Connection
2 Installation Plate
85° 1 Refrigerant, Drain Pipe and Cable Routing Hole Knock-out Type
No Name Description
Unit : mm SJ Chassis

(767)
Air Intake Hole
Rear Rear

Left Right

(150)
Air Intake Hole
VM092C6, VM122C6, VM121C6

837 189 837


93 306 94
Air Intake
63
5. Dimensional Drawings

63

64
263
142 199
Inverter Single Wall Mounted - 50/60 Hz (R410A)

5
308

1 1 Ø65 Ø65

le
308

Ho
tlet
2

Ou
(5
56

56
23
23

Air 6)
9
(715) Air Outlet 98 134
51 Bottom 8 Unit Outline
Air Outlet Hole 152 194
51 Fixing the Installation Plate, Drilling Hole

50 26 837

In Case of Left Side Piping


62
31 34

152
6x3
4 Approx. 288 to gas pipe

61
33
59
3x6 1
Approx. 218 to liquid pipe

15
60
308

6 92
3
* If airflow direction control is available,
47

Up & Down Left & Right


38 132
Unit Outline
Cooling Heating Connecting Gas/Liquid Pipe

55° 55°
6 Decoration Cover
15° 5 Display & Remote Controller Signal Receiver
15°
4 Terminal Block for Power Supply and Communication
45° 3 Drain Hose Connection
2 Installation Plate
85° 1 Refrigerant, Drain Pipe and Cable Routing Hole Knock-out Type
No Name Description

40
41
Unit : mm SK Chassis

(918)
Air Intake Hole
Rear Rear
VM182C6, VM242C6

Left Right

(170)
Air Intake Hole
210 998
998
115 373 137
Air Intake
69

53
53
5. Dimensional Drawings

300
188

345
345

1 5 1 150

ole
Ø65 Ø65

tH
Inverter Single Wall Mounted - 50/60 Hz (R410A)

utle )
60
2

60
iA r O (74
11
27

27
Air 11
60 (872) Bottom Outlet 83 83
60 Unit Outline
Air Outlet Hole 134 150
Fixing the Installation Plate, Drilling Hole

998
50 26

62
31 34 In case of Left Side Piping

152
6x3
4

61
33
56
3x6
1 Approx. 240 to gas pipe

15
57
345

Approx. 160 to liquid pipe


90
6
3
63

* If airflow direction control is available,

Up & Down Left & Right 37 164


Unit Outline
Cooling Heating
Connecting Gas/Liquid Pipe

50° 50°
6 Decoration Cover
15° 5 Display & Remote Controller Signal Receiver
20°
4 Terminal Block for Power Supply and Communication
45° 3 Drain Hose Connection
2 Installation Plate
85° 1 Refrigerant, Drain Pipe and Cable Routing Hole Knock-out Type
No Name Description
Unit : mm SJ Chassis

(767)
Air Intake Hole
VR092C7, VR122C7

Rear Rear

Left Right

(150)
Air Intake Hole
837 192 837
93 306 94
Air Intake
63
5. Dimensional Drawings

63

64
263
142 199
Inverter Single Wall Mounted - 50/60 Hz (R410A)

5
308

1 1 Ø65 Ø65

le
308

Ho
tlet
2

5(
Ou
56
23
23

56
Air 6)
9
(715) Air Outlet 98 134
51 Bottom 8 Unit Outline
Air Outlet Hole 152 194
51 Fixing the Installation Plate, Drilling Hole

50 26 837

In Case of Left Side Piping


62
31 34

152
6x3
4 Approx. 288 to gas pipe

61
33
59
3x6 1
Approx. 218 to liquid pipe

15
60
308

6 92
3
* If airflow direction control is available,
47

Up & Down Left & Right


38 132
Unit Outline
Cooling Heating Connecting Gas/Liquid Pipe

55° 55°
6 Decoration Cover
15° 5 Display & Remote Controller Signal Receiver
15°
4 Terminal Block for Power Supply and Communication
45° 3 Drain Hose Connection
2 Installation Plate
85° 1 Refrigerant, Drain Pipe and Cable Routing Hole Knock-out Type
No Name Description

42
43
Unit : mm SK Chassis

(918)
Air Intake Hole
Rear Rear
VR182C7, VR242C7

Left Right

(170)
Air Intake Hole
212 998
998
115 373 137
Air Intake

69

53
53
5. Dimensional Drawings

300
188

345
345

1 5 1 150

ole
Ø65 Ø65

tH
Inverter Single Wall Mounted - 50/60 Hz (R410A)

utle )
60
2

60
iA r O (74
27

27

11
Air 11
60 (872) Bottom Outlet 83 83
60 Unit Outline
Air Outlet Hole 134 150
Fixing the Installation Plate, Drilling Hole

998
50 26

62
In case of Left Side Piping
31 34

152
6x3
4

61
33
56
3x6 Approx. 240 to gas pipe
1

15
345

57 Approx. 160 to liquid pipe


90
6 3
63

* If airflow direction control is available,

Up & Down Left & Right 37 164


Unit Outline
Cooling Heating Connecting Gas/Liquid Pipe

50° 50°
6 Decoration Cover
15° 5 Display & Remote Controller Signal Receiver
20°
4 Terminal Block for Power Supply and Communication
45° 3 Drain Hose Connection
2 Installation Plate
85° 1 Refrigerant, Drain Pipe and Cable Routing Hole Knock-out Type
No Name Description
Unit : mm UA3 Chassis

Drain Hole 3-Ø20


5.2 Outdoor Unit

89 463

270
250
5. Dimensional Drawings
Inverter Single Wall Mounted - 50/60 Hz (R410A)

717
230
5 267 65 16 56

Ø413 2

483
21°
5

235
21°

14
129

74

127
1 4

6 Liquid Pipe Connection Flare Joint


5 Gas Pipe Connection Flare Joint
4 Service Valve Cover
3 Power and Communication Cable Hole
2 Control Box
1 Air Outlet
VM092C7, VM122C7, VM121C7, VR092C7, VR122C7, VM092C6, VM122C6, VM121C6

No Name Description

44
45
Unit : mm UL2 Chassis

Drain Hole 2-Ø20


VM182C7, VM182C6, VR182C7

106 558
5. Dimensional Drawings

353
330
Inverter Single Wall Mounted - 50/60 Hz (R410A)

24 770 69 288 54
277 14

2
Ø440
3

545
25°
5

267
25°

6
176

15
103

1 122 4

6 Liquid Pipe Connection Flare Joint


5 Gas Pipe Connection Flare Joint
4 Service Valve Cover
3 Power and Communication Cable Hole
2 Control Box
1 Air Outlet
No Name Description
Unit : mm U24A Chassis

Drain Hole 2-Ø20


VM242C7, VR242C7

143 586

386
366
5. Dimensional Drawings
Inverter Single Wall Mounted - 50/60 Hz (R410A)

26 870 78 330
322 32 19 52

515 4
3

650

313
6 2 5 ° 2 5°
5
172
117

22
166
1 192

6 Liquid Pipe Connection Flare Joint


5 Gas Pipe Connection Flare Joint
4 Service Valve Cover
3 Power and Communication Cable Hole
2 Control Box
1 Air Outlet
No Name Description

46
47
Unit : mm UE Chassis
VM242C6
Drain Hole 6-Ø20

164 546

360
340
5. Dimensional Drawings
Inverter Single Wall Mounted - 50/60 Hz (R410A)

870 320
25 301 80 11 69

470

655
25°

319
21°

22
195
107

230
234 4
1

6 Liquid Pipe Connection Flare Joint


5 Gas Pipe Connection Flare Joint
4 Service Valve Cover
3 Power and Communication Cable Hole
2 Control Box
1 Air Outlet
No Name Description
Inverter Single Wall Mounted - 50/60 Hz (R410A)
5. Dimensional Drawings
5.3 Corner Weight and Center of Gravity Dimension for Outdoor Unit

d D
A

C c
B

Weight (kg) Center of Gravity (mm) Leg (mm) Corner Weight (kg)
Model Tool
Shipping Net a b c d e A B C D
VM092C6.UJ1 UA3 25.2 23.2 475 219 113 463 256 1.4 2.4 9.7 9.7
VM122C6.UJ1 UA3 26.3 24.3 475 219 113 463 256 1.6 2.5 10.1 10.1
VM092C7.UJ0, VM122C7.UJ0, UA3 26.5 24.6 475 219 113 463 256 1.6 2.5 10.3 10.2
VR092C7.UJ0, VR122C7.UJ0
VM121C6.UJ1, VM121C7.UJ0 UA3 27.2 25.2 475 219 113 463 256 1.6 2.6 10.5 10.5
VM182C6.UK1 UL2 34.7 32.5 507 237 143 558 330 4.4 4.7 11.7 11.7
VM182C7.UK0, VR182C7.UK0 UL2 35.2 32.5 507 237 143 558 330 4.4 4.7 11.7 11.7
VM242C7.UK0, VR242C7.UK0 U24A 46.0 42.0 565 260 150 586 366 5.1 6.6 16.2 14.1
VM242C6.UK1 UE 44.0 41.0 535 265 175 546 340 6.8 6.3 12.4 15.5
VM092C6.US0 UA3 27.2 23.2 475 219 113 463 256 1.4 2.4 9.7 9.7
VM122C6.US0 UA3 28.3 24.3 475 219 113 463 256 1.6 2.5 10.1 10.1
VM092C7.UA1, VM122C7.UA1, UA3 28.6 24.6 475 219 113 463 256 1.6 2.5 10.3 10.2
VR092C7.UA1, VR122C7.UA1
VM121C6.US0 UA3 29.1 25.2 475 219 113 463 256 1.6 2.6 10.5 10.5
VM182C7.UL1, VM182C6.US2, UL2 37.3 32.5 507 237 143 558 330 4.4 4.7 11.7 11.7
VR182C7.UL1
VM242C7.U21, VR242C7.U21 U24A 49.0 42.0 565 260 150 586 366 5.1 6.6 16.2 14.1
VM242C6.US0 UE 47.0 41.0 535 265 175 546 340 6.8 6.3 12.4 15.5

Weight (lb.) Center of Gravity (in.) Leg (in.) Corner Weight (lb.)
Model Tool
Shipping Net a b c d e A B C D
VM092C6.UJ1 UA3 55.6 51.1 18-23/32 8-5/8 4-15/32 18-7/32 10-1/32 3.2 5.3 21.3 21.3
VM122C6.UJ1 UA3 58.0 53.6 18-23/32 8-5/8 4-15/32 18-7/32 10-1/32 3.5 5.5 22.3 22.3
VM092C7.UJ0, VM122C7.UJ0, UA3 58.4 54.2 18-23/32 8-5/8 4-15/32 18-7/32 10-1/32 3.5 5.6 22.6 22.5
VR092C7.UJ0, VR122C7.UJ0
VM121C6.UJ1, VM121C7.UJ0 UA3 60.0 55.6 18-23/32 8-5/8 4-15/32 18-7/32 10-1/32 3.5 5.7 23.2 23.2
VM182C6.UK1 UL2 76.5 71.7 19-31/32 9-11/32 5-21/32 22 12-31/32 9.8 10.5 25.7 25.7
VM182C7.UK0, VR182C7.UK0 UL2 77.6 71.7 19-31/32 9-11/32 5-21/32 22 12-31/32 9.8 10.5 25.7 25.7
VM242C7.UK0, VR242C7.UK0 U24A 101.4 92.6 22-1/4 10-1/4 5-29/32 23-1/16 14-13/32 11.2 14.6 35.7 31.1
VM242C6.UK1 UE 97.0 90.4 21-3/32 10-7/16 6-29/32 21-1/2 13-13/32 15.1 13.9 27.3 34.1
VM092C6.US0 UA3 60.0 51.1 18-23/32 8-5/8 4-15/32 18-7/32 10-1/32 3.2 5.3 21.3 21.3
VM122C6.US0 UA3 62.4 53.6 18-23/32 8-5/8 4-15/32 18-7/32 10-1/32 3.5 5.5 22.3 22.3
VM092C7.UA1, VM122C7.UA1, UA3 63.1 54.2 18-23/32 8-5/8 4-15/32 18-7/32 10-1/32 3.5 5.6 22.6 22.5
VR092C7.UA1, VR122C7.UA1
VM121C6.US0 UA3 64.2 55.6 18-23/32 8-5/8 4-15/32 18-7/32 10-1/32 3.5 5.7 23.2 23.2
VM182C7.UL1, VM182C6.US2, UL2 82.2 71.7 19-31/32 9-11/32 5-21/32 22 12-31/32 9.8 10.5 25.7 25.7
VR182C7.UL1
VM242C7.U21, VR242C7.U21 U24A 108.0 92.6 22-1/4 10-1/4 5-29/32 23-1/16 14-13/32 11.2 14.6 35.7 31.1
VM242C6.US0 UE 103.6 90.4 21-3/32 10-7/16 6-29/32 21-1/2 13-13/32 15.1 13.9 27.3 34.1

Note
• Design features and information of indoor and outdoor unit may be changed without notifications due to our policy of innovation.
• The center of gravity and corner weight may be different from the actual values because these are simulation results.

48
Inverter Single Wall Mounted - 50/60 Hz (R410A)
6. Wiring Diagrams
6.1 Indoor Unit
VM092C7 (USNQ092J2P0), VM122C7 (USNQ122J2P0), VM182C7 (USNQ182K2P0),
VM242C7 (USNQ242K2P0), VM121C7 (USNQ121J2P0), VR092C7 (USNQ092JRP0),
VR122C7 (USNQ122JRP0), VR182C7 (USNQ182KRP0), VR242C7 (USNQ242KRP0)

EEPROM

CN-TH1
CN-TH3

P/No : MEZ66711012

VM092C6 (USNQ092J3W0), VM122C6 (USNQ122J3W0), VM182C6 (USNQ182K3W0),


VM242C6 (USNQ242K3W0), VM121C6 (USNQ121J3W0)

Factory Wiring
Field Wiring
Option

EEPROM

CN-LINK

P/No : MEZ64835116

49
Inverter Single Wall Mounted - 50/60 Hz (R410A)
6. Wiring Diagrams
6.2 Outdoor Unit
VM121C6.US0 (USUQ121J3W0)

Factory Wiring
Field Wiring
Option

MEZ66711001

VM122C6.UJ1 (USUQ122J3W0)

Factory Wiring
Field Wiring
Option

wˆššŒ
why{z

MEZ66711008

50
Inverter Single Wall Mounted - 50/60 Hz (R410A)
6. Wiring Diagrams

VM121C7 (USUQ121J2P0), VM121C6.UJ1 (USUQ121J3W0)

Factory Wiring
Field Wiring
Option

MEZ66711009

VM182C6.UK1 (USUQ182K3W0)

Factory Wiring
Field Wiring
Option

CN-FAN(BLDC)

BR
WCN-P(L)
BL
WCN-P(N)
RD
COM(RD) CN-COMP
(U,V,W)

MEZ66711010

51
Inverter Single Wall Mounted - 50/60 Hz (R410A)
6. Wiring Diagrams

VM242C6.UK1 (USUQ242K3W0)

Factory Wiring
Field Wiring
Option

MEZ66711011

VM092C7 (USUQ092J2P0), VM122C7 (USUQ122J2P0), VM182C7 (USUQ182K2P0),


VM182C6.US2 (USUQ182K3W2), VR092C7 (USUQ092JRP0), VR122C7 (USUQ122JRP0),
VR182C7 (USUQ182KRP0)

Factory Wiring
Field Wiring
Option

RD
CN-FAN

BL

YL

BR
BR
WCN-P(L)
BL
RD
WCN-P(N)
BL
RD

COM(RD) CN-COMP
(U,V,W)

MEZ66711016

52
Inverter Single Wall Mounted - 50/60 Hz (R410A)
6. Wiring Diagrams

VM242C7 (USUQ242K2P0), VR242C7 (USUQ242KRP0)

Factory Wiring
Field Wiring
Option

250 V/3.15 A

AC 250 V/20 A
(250 V,5 A)

MEZ66711017

VM092C6 (USUQ092J3W0), VM122C6.US0 (USUQ122J3W0)

Factory Wiring
Field Wiring
Option

wˆššŒ
why{z

MEZ64835117

53
Inverter Single Wall Mounted - 50/60 Hz (R410A)
6. Wiring Diagrams

VM242C6.US0 (USUQ242K3W0)

Factory Wiring
Field Wiring
Option

MEZ64943818

54
Inverter Single Wall Mounted - 50/60 Hz (R410A)
7. Refrigerant Cycle Diagrams
VM182C7 (US-Q182K2P0), VR182C7 (US-Q182KRP0)

Indoor Unit Outdoor Unit

Field Pipin g
2-Way Valve
(Copper Tubing)

Liquid Side
Capillary Tube

M
Th1 Th3
Heat M Heat
Exchanger Exchanger
(Evaporator) Th2 (Condenser)
3-Way Valve
Reversing Th4
Field Pipin g Valve
(Copper Tubing)

Gas Side
Th5

: Cooling
Compressor

Loc. Description PCB Connector


Th1 Thermistor for indoor air temperature CN-TH1 (Indoor)
Th2 Thermistor for evaporator temperature CN-TH3 (Indoor)
Th3 Thermistor for outdoor air temperature
CN-TH1 (Outdoor)
Th4 Thermistor for condenser temperature
Th5 Thermistor for discharge pipe temperature CN-TH2 (Outdoor)

 Refrigerant Pipe Connection Port Diameters


Gas Liquid
Model Capillary Tube
mm inch mm inch
VM182C7, VR182C7 Ø 12.7 Ø 1/2 Ø 6.35 Ø 1/4 (OD 3.2× ID 1.8 × 900 mm) × 1EA

Heat Exchanger M Propeller Fan Cross Flow Fan Compressor r Accumulator 4 Way Valve

EEV
2-Way Valve
Appendix (Electronic
Expansion Valve)
Capillary Tube
3-Way Valve
Temperature
Sensor
Pressure Sensor Pressure Switch

Check Valve Flare Joint Muffler Strainer

55
Inverter Single Wall Mounted - 50/60 Hz (R410A)
7. Refrigerant Cycle Diagrams
VM122C6 (US-Q122J3W0), VM121C6 (US-Q121J3W0), VM182C6 (US-Q182K3W0,
US-Q182K3W2)

Indoor Unit Outdoor Unit

Field Pipin g
2-Way Valve
(Copper Tubing)

Liquid Side
Capillary Tube

M
Th1 Th3
Heat M Heat
Exchanger Exchanger
(Evaporator) Th2 (Condenser)
3-Way Valve
Reversing Th4
Field Pipin g Valve
(Copper Tubing)

Gas Side
Th5

: Cooling
Compressor

Loc. Description PCB Connector


Th1 Thermistor for indoor air temperature CN-TH1 (Indoor)
Th2 Thermistor for evaporator temperature CN-TH2 (Indoor)
Th3 Thermistor for outdoor air temperature
CN-TH1 (Outdoor)
Th4 Thermistor for condenser temperature
Th5 Thermistor for discharge pipe temperature CN-TH2 (Outdoor)

 Refrigerant Pipe Connection Port Diameters


Gas Liquid
Model Capillary Tube
mm inch mm inch
VM122C6, VM121C6 Ø 9.52 Ø 3/8 Ø 6.35 Ø 1/4 (OD 3.2× ID 1.6 × 950 mm) × 1EA
VM182C6 Ø 12.7 Ø 1/2 Ø 6.35 Ø 1/4 (OD 3.2× ID 1.8 × 900 mm) × 1EA

Heat Exchanger M Propeller Fan Cross Flow Fan Compressor r Accumulator 4 Way Valve

EEV
2-Way Valve
Appendix (Electronic
Expansion Valve)
Capillary Tube
3-Way Valve
Temperature
Sensor
Pressure Sensor Pressure Switch

Check Valve Flare Joint Muffler Strainer

56
Inverter Single Wall Mounted - 50/60 Hz (R410A)
7. Refrigerant Cycle Diagrams
VM092C7 (US-Q092J2P0), VM122C7 (US-Q122J2P0), VP242C7 (US-Q242K2P0), VM121C7
(US-Q121J2P0), VR092C7 (US-Q092JRP0), VR122C7 (US-Q122JRP0), VR242C7
(US-Q242KRP0)

Indoor Unit Outdoor Unit

Field Pipin g
2-Way Valve
(Copper Tubing)

Liquid Side
Capillary Tube

M
Th1 Th3
Heat M Heat
Exchanger Exchanger
(Evaporator) Th2 (Condenser)
3-Way Valve
Reversing Th4
Field Pipin g Valve
(Copper Tubing)

Gas Side
Th5

: Cooling
Compressor

Loc. Description PCB Connector


Th1 Thermistor for indoor air temperature CN-TH1 (Indoor)
Th2 Thermistor for evaporator temperature CN-TH3 (Indoor)
Th3 Thermistor for outdoor air temperature
CN-TH1 (Outdoor)
Th4 Thermistor for condenser temperature
Th5 Thermistor for discharge pipe temperature CN-TH2 (Outdoor)

 Refrigerant Pipe Connection Port Diameters


Gas Liquid
Model Capillary Tube
mm inch mm inch
VM092C7, VM122C7, VM121C7, Ø 9.52 Ø 3/8 Ø 6.35 Ø 1/4 (OD 3.2× ID 1.6 × 1100 mm) × 1EA
VR092C7, VR122C7
Ø
VM242C7, VR242C7 Ø 5/8 Ø 6.35 Ø 1/4 (OD 3.2× ID 1.8 × 550 mm) × 1EA
15.88

Heat Exchanger M Propeller Fan Cross Flow Fan Compressor r Accumulator 4 Way Valve

EEV
2-Way Valve
Appendix (Electronic
Expansion Valve)
Capillary Tube
3-Way Valve
Temperature
Sensor
Pressure Sensor Pressure Switch

Check Valve Flare Joint Muffler Strainer

57
Inverter Single Wall Mounted - 50/60 Hz (R410A)
7. Refrigerant Cycle Diagrams
VM242C6 (US-Q242K3W0)

Indoor Unit Outdoor Unit

Field Pipin g
2-Way Valve
(Copper Tubing)

Liquid Side
Capillary Tube

M
Th1 Th3
Heat M Heat
Exchanger Exchanger
(Evaporator) Th2 (Condenser)
3-Way Valve
Reversing Th4
Field Pipin g Valve
(Copper Tubing)

Gas Side
Th5
Accumulator

: Cooling
Compressor

Loc. Description PCB Connector


Th1 Thermistor for indoor air temperature CN-TH1 (Indoor)
Th2 Thermistor for evaporator temperature CN-TH2 (Indoor)
Th3 Thermistor for outdoor air temperature
CN-TH1 (Outdoor)
Th4 Thermistor for condenser temperature
Th5 Thermistor for discharge pipe temperature CN-TH2 (Outdoor)

 Refrigerant Pipe Connection Port Diameters


Gas Liquid
Model Capillary Tube
mm inch mm inch
VM242C6 Ø Ø 5/8 Ø 6.35 Ø 1/4 (OD 3.2× ID 1.8 × 650 mm) × 1EA
15.88

Heat Exchanger M Propeller Fan Cross Flow Fan Compressor r Accumulator 4 Way Valve

EEV
2-Way Valve
Appendix (Electronic
Expansion Valve)
Capillary Tube
3-Way Valve
Temperature
Sensor
Pressure Sensor Pressure Switch

Check Valve Flare Joint Muffler Strainer

58
Inverter Single Wall Mounted - 50/60 Hz (R410A)
7. Refrigerant Cycle Diagrams
VM092C6 (US-Q092J3W0)

Indoor Unit Outdoor Unit

Field Pipin g
2-Way Valve
(Copper Tubing)

Liquid Side
Capillary Tube

M
Th1 Th3
Heat M Heat
Exchanger Exchanger
(Evaporator) Th2 (Condenser)
3-Way Valve
Reversing Th4
Field Pipin g Valve
(Copper Tubing)

Gas Side
Th5

: Cooling
Compressor

Loc. Description PCB Connector


Th1 Thermistor for indoor air temperature CN-TH1 (Indoor)
Th2 Thermistor for evaporator temperature CN-TH2 (Indoor)
Th3 Thermistor for outdoor air temperature
CN-TH1 (Outdoor)
Th4 Thermistor for condenser temperature
Th5 Thermistor for discharge pipe temperature CN-TH2 (Outdoor)

 Refrigerant Pipe Connection Port Diameters


Gas Liquid
Model Capillary Tube
mm inch mm inch
VM092C6 Ø 9.52 Ø 3/8 Ø 6.35 Ø 1/4 (OD 2.6× ID 1.4 × 600 mm) × 1EA

Heat Exchanger M Propeller Fan Cross Flow Fan Compressor r Accumulator 4 Way Valve

EEV
2-Way Valve
Appendix (Electronic
Expansion Valve)
Capillary Tube
3-Way Valve
Temperature
Sensor
Pressure Sensor Pressure Switch

Check Valve Flare Joint Muffler Strainer

59
Inverter Single Wall Mounted - 50/60 Hz (R410A)
8. Capacity Tables
8.1 Rated Cooling Capacity
VM092C7.SJ0 (US-Q092J2P0), VR092C7.SJ0 (US-Q092JRP0)
Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 2.28 2.15 0.38 2.48 2.21 0.40 2.69 2.27 0.42 2.95 2.34 0.45 3.10 2.39 0.47 3.27 2.65 0.49 3.51 3.02 0.51
20 2.26 2.14 0.39 2.46 2.20 0.41 2.66 2.27 0.43 2.91 2.35 0.46 3.06 2.40 0.48 3.24 2.66 0.50 3.47 3.01 0.52
25 2.22 2.06 0.49 2.40 2.14 0.51 2.58 2.23 0.53 2.81 2.33 0.56 2.94 2.40 0.57 3.11 2.62 0.60 3.35 2.93 0.62
30 2.18 1.99 0.58 2.34 2.09 0.60 2.50 2.19 0.63 2.70 2.31 0.66 2.82 2.39 0.67 2.99 2.58 0.69 3.23 2.85 0.73
35 2.14 1.91 0.68 2.28 2.03 0.70 2.42 2.15 0.73 2.60 2.29 0.75 2.70 2.38 0.77 2.87 2.55 0.79 3.11 2.77 0.83
41 2.32 1.85 0.94 2.49 1.98 0.97 2.65 2.11 1.00 2.86 2.27 1.04 2.99 2.37 1.06 3.17 2.52 1.10 3.42 2.72 1.14
46 2.37 1.70 1.16 2.55 1.83 1.20 2.72 1.96 1.24 2.95 2.13 1.28 3.08 2.22 1.31 3.27 2.36 1.35 3.53 2.54 1.41
48 2.31 1.66 1.17 2.48 1.79 1.21 2.66 1.92 1.25 2.88 2.07 1.29 3.01 2.17 1.32 3.19 2.30 1.36 3.44 2.48 1.42

VM121C7.SJ0 (US-Q121J2P0)
Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 2.21 2.09 0.37 2.41 2.15 0.39 2.61 2.21 0.41 2.86 2.28 0.44 3.01 2.32 0.45 3.18 2.58 0.47 3.41 2.93 0.50
20 2.19 2.08 0.38 2.39 2.14 0.40 2.58 2.21 0.42 2.82 2.29 0.45 2.97 2.34 0.46 3.14 2.58 0.48 3.37 2.93 0.50
25 2.38 2.11 0.58 2.58 2.20 0.61 2.77 2.29 0.64 3.01 2.39 0.67 3.15 2.46 0.69 3.34 2.69 0.72 3.59 3.00 0.75
30 2.58 2.14 0.80 2.77 2.25 0.83 2.96 2.36 0.86 3.20 2.50 0.90 3.34 2.58 0.92 3.54 2.79 0.95 3.82 3.08 0.99
35 2.80 2.17 1.02 2.98 2.31 1.05 3.16 2.44 1.08 3.38 2.60 1.13 3.52 2.70 1.15 3.74 2.89 1.19 4.05 3.15 1.23
41 2.57 1.92 1.09 2.75 2.06 1.13 2.94 2.19 1.16 3.17 2.36 1.21 3.31 2.46 1.23 3.51 2.62 1.27 3.79 2.83 1.32
46 2.24 1.61 1.13 2.41 1.74 1.16 2.58 1.86 1.20 2.79 2.01 1.25 2.92 2.11 1.27 3.10 2.23 1.31 3.34 2.40 1.37
48 2.18 1.57 1.14 2.35 1.69 1.17 2.52 1.81 1.21 2.72 1.96 1.25 2.85 2.06 1.28 3.02 2.18 1.32 3.26 2.35 1.38

VM122C7.SJ0 (US-Q122J2P0), VR122C7.SJ0 (US-Q122JRP0)


Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 2.28 2.15 0.38 2.48 2.21 0.40 2.69 2.27 0.42 2.95 2.34 0.45 3.10 2.39 0.47 3.27 2.65 0.49 3.51 3.02 0.51
20 2.26 2.14 0.39 2.46 2.20 0.41 2.66 2.27 0.43 2.91 2.35 0.46 3.06 2.40 0.48 3.24 2.66 0.50 3.47 3.01 0.52
25 2.43 2.18 0.57 2.63 2.27 0.60 2.82 2.36 0.63 3.07 2.47 0.66 3.21 2.54 0.68 3.40 2.78 0.70 3.66 3.10 0.74
30 2.61 2.22 0.76 2.80 2.34 0.79 2.99 2.45 0.82 3.22 2.59 0.86 3.37 2.68 0.88 3.57 2.89 0.91 3.86 3.19 0.95
35 2.80 2.26 0.96 2.98 2.40 0.99 3.16 2.54 1.02 3.38 2.71 1.06 3.52 2.81 1.08 3.74 3.01 1.11 4.05 3.27 1.16
41 2.64 2.01 1.08 2.83 2.16 1.11 3.01 2.30 1.15 3.25 2.47 1.19 3.39 2.58 1.22 3.60 2.74 1.25 3.89 2.97 1.30
46 2.37 1.70 1.16 2.55 1.83 1.20 2.72 1.96 1.24 2.95 2.13 1.28 3.08 2.22 1.31 3.27 2.36 1.35 3.53 2.54 1.41
48 2.31 1.66 1.17 2.48 1.79 1.21 2.66 1.92 1.25 2.88 2.07 1.29 3.01 2.17 1.32 3.19 2.30 1.36 3.44 2.48 1.42

VM092C6.SJ1 (US-Q092J3W0)
Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 2.28 2.15 0.38 2.48 2.21 0.40 2.69 2.27 0.42 2.95 2.34 0.45 3.10 2.39 0.47 3.27 2.65 0.49 3.51 3.02 0.51
20 2.26 2.14 0.39 2.46 2.20 0.41 2.66 2.27 0.43 2.91 2.35 0.46 3.06 2.40 0.48 3.24 2.66 0.50 3.47 3.01 0.52
25 2.22 2.03 0.50 2.40 2.11 0.52 2.58 2.20 0.55 2.81 2.30 0.58 2.94 2.36 0.59 3.11 2.58 0.61 3.35 2.89 0.64
30 2.18 1.93 0.61 2.34 2.03 0.64 2.50 2.13 0.66 2.70 2.25 0.69 2.82 2.32 0.71 2.99 2.51 0.73 3.23 2.77 0.77
35 2.14 1.84 0.73 2.28 1.95 0.75 2.42 2.06 0.78 2.60 2.20 0.81 2.70 2.29 0.83 2.87 2.44 0.85 3.11 2.66 0.89
41 2.10 1.66 0.89 2.25 1.78 0.92 2.40 1.90 0.95 2.59 2.05 0.98 2.70 2.13 1.00 2.87 2.27 1.04 3.09 2.45 1.08
46 1.95 1.43 1.02 2.10 1.54 1.05 2.25 1.65 1.08 2.44 1.79 1.12 2.55 1.87 1.15 2.70 1.98 1.18 2.91 2.14 1.23
48 1.90 1.40 1.02 2.05 1.51 1.06 2.19 1.61 1.09 2.38 1.75 1.13 2.48 1.83 1.15 2.64 1.94 1.19 2.84 2.09 1.24

Symbol Note
DB : Dry Bulb Temperature [୅] 1. All capacities are net, evaporator fan motor heat is deducted.
WB : Wet Bulb Temperature [୅] 2. Direct interpolation is permissible. Do not extrapolate.
TC : Total Capacity [kW] 3. Capacities are based on the following conditions.
SHC : Sensible Heating Capacity [kW] – Interconnecting Piping Length 7.5 m
PI : Power Input [kW] – Level Difference of Zero.
(Comp.+ Indoor Fan Motor + Outdoor Fan Motor)

60
Inverter Single Wall Mounted - 50/60 Hz (R410A)
8. Capacity Tables

VM121C6.SJ1 (US-Q121J3W0)
Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 2.21 2.09 0.37 2.41 2.15 0.39 2.61 2.21 0.41 2.86 2.28 0.44 3.01 2.32 0.45 3.18 2.58 0.47 3.41 2.93 0.50
20 2.19 2.08 0.38 2.39 2.14 0.40 2.58 2.21 0.42 2.82 2.29 0.45 2.97 2.34 0.46 3.14 2.58 0.48 3.37 2.93 0.50
25 2.38 2.11 0.59 2.58 2.20 0.62 2.77 2.29 0.64 3.01 2.39 0.68 3.15 2.46 0.70 3.34 2.69 0.72 3.59 3.00 0.76
30 2.58 2.14 0.81 2.77 2.25 0.84 2.96 2.36 0.87 3.20 2.50 0.91 3.34 2.58 0.93 3.54 2.79 0.97 3.82 3.08 1.01
35 2.80 2.17 1.04 2.98 2.31 1.07 3.16 2.44 1.10 3.38 2.60 1.15 3.52 2.70 1.17 3.74 2.89 1.21 4.05 3.15 1.26
41 2.29 1.83 0.98 2.45 1.96 1.02 2.62 2.09 1.05 2.82 2.25 1.09 2.94 2.35 1.11 3.12 2.50 1.14 3.37 2.70 1.19
46 1.72 1.45 0.91 1.85 1.56 0.94 1.98 1.67 0.96 2.15 1.81 1.00 2.25 1.89 1.02 2.38 2.00 1.05 2.57 2.16 1.10
48 1.68 1.41 0.91 1.81 1.52 0.94 1.93 1.63 0.97 2.09 1.76 1.01 2.19 1.85 1.03 2.32 1.96 1.06 2.51 2.11 1.11

VM122C6.SJ1 (US-Q122J3W0)
Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 2.28 2.15 0.38 2.48 2.21 0.40 2.69 2.27 0.42 2.95 2.34 0.45 3.10 2.39 0.47 3.27 2.65 0.49 3.51 3.02 0.51
20 2.26 2.14 0.39 2.46 2.20 0.41 2.66 2.27 0.43 2.91 2.35 0.46 3.06 2.40 0.48 3.24 2.66 0.50 3.47 3.01 0.52
25 2.43 2.18 0.60 2.63 2.27 0.63 2.82 2.36 0.65 3.07 2.47 0.69 3.21 2.54 0.71 3.40 2.78 0.73 3.66 3.10 0.77
30 2.61 2.22 0.81 2.80 2.34 0.85 2.99 2.45 0.88 3.22 2.59 0.92 3.37 2.68 0.94 3.57 2.89 0.97 3.86 3.19 1.01
35 2.80 2.26 1.04 2.98 2.40 1.07 3.16 2.54 1.10 3.38 2.71 1.15 3.52 2.81 1.17 3.74 3.01 1.21 4.05 3.27 1.26
41 2.41 1.87 1.04 2.59 2.00 1.08 2.76 2.13 1.11 2.98 2.30 1.15 3.11 2.39 1.18 3.30 2.54 1.21 3.56 2.75 1.26
46 1.95 1.43 1.02 2.10 1.54 1.05 2.25 1.65 1.08 2.44 1.79 1.12 2.55 1.87 1.15 2.70 1.98 1.18 2.91 2.14 1.23
48 1.90 1.40 1.02 2.05 1.51 1.06 2.19 1.61 1.09 2.38 1.75 1.13 2.48 1.83 1.15 2.64 1.94 1.19 2.84 2.09 1.24

VM182C7.SK0 (US-Q182K2P0), VR182C7.SK0 (US-Q182KRP0)


Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 4.38 3.53 1.00 4.78 3.63 1.05 5.18 3.73 1.11 5.67 3.85 1.18 5.97 3.93 1.23 6.30 4.36 1.28 6.76 4.96 1.35
20 4.36 3.51 1.03 4.74 3.62 1.08 5.13 3.73 1.14 5.61 3.87 1.21 5.90 3.95 1.25 6.23 4.37 1.30 6.69 4.95 1.37
25 4.30 3.46 1.16 4.65 3.60 1.21 5.00 3.74 1.27 5.43 3.92 1.33 5.69 4.02 1.37 6.02 4.40 1.42 6.48 4.91 1.49
30 4.25 3.40 1.30 4.56 3.57 1.35 4.87 3.75 1.40 5.25 3.96 1.46 5.49 4.09 1.50 5.82 4.42 1.55 6.28 4.88 1.62
35 4.19 3.35 1.44 4.46 3.55 1.48 4.74 3.75 1.53 5.08 4.01 1.59 5.28 4.16 1.62 5.62 4.45 1.67 6.08 4.85 1.74
41 3.67 3.04 1.43 3.93 3.26 1.47 4.20 3.47 1.52 4.53 3.74 1.57 4.73 3.90 1.61 5.01 4.14 1.66 5.41 4.48 1.72
46 3.03 2.63 1.38 3.26 2.83 1.42 3.48 3.03 1.46 3.77 3.28 1.52 3.94 3.44 1.55 4.18 3.64 1.60 4.51 3.92 1.66
48 2.95 2.57 1.39 3.17 2.76 1.43 3.40 2.96 1.47 3.68 3.21 1.53 3.85 3.35 1.56 4.08 3.55 1.61 4.40 3.83 1.68

VM182C6.SK1 (US-Q182K3W0)
Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 4.38 3.53 1.00 4.78 3.63 1.05 5.18 3.73 1.11 5.67 3.85 1.18 5.97 3.93 1.23 6.30 4.36 1.28 6.76 4.96 1.35
20 4.36 3.51 1.03 4.74 3.62 1.08 5.13 3.73 1.14 5.61 3.87 1.21 5.90 3.95 1.25 6.23 4.37 1.30 6.69 4.95 1.37
25 4.30 3.46 1.20 4.65 3.60 1.25 5.00 3.74 1.31 5.43 3.92 1.37 5.69 4.02 1.42 6.02 4.40 1.47 6.48 4.91 1.54
30 4.25 3.40 1.37 4.56 3.57 1.42 4.87 3.75 1.48 5.25 3.96 1.54 5.49 4.09 1.58 5.82 4.42 1.64 6.28 4.88 1.71
35 4.19 3.35 1.55 4.46 3.55 1.60 4.74 3.75 1.65 5.08 4.01 1.71 5.28 4.16 1.75 5.62 4.45 1.80 6.08 4.85 1.88
41 3.67 3.04 1.48 3.93 3.26 1.53 4.20 3.47 1.58 4.53 3.74 1.64 4.73 3.90 1.67 5.01 4.14 1.72 5.41 4.48 1.79
46 3.03 2.63 1.38 3.26 2.83 1.42 3.48 3.03 1.46 3.77 3.28 1.52 3.94 3.44 1.55 4.18 3.64 1.60 4.51 3.92 1.66
48 2.95 2.57 1.39 3.17 2.76 1.43 3.40 2.96 1.47 3.68 3.21 1.53 3.85 3.35 1.56 4.08 3.55 1.61 4.40 3.83 1.68

Symbol Note
DB : Dry Bulb Temperature [୅] 1. All capacities are net, evaporator fan motor heat is deducted.
WB : Wet Bulb Temperature [୅] 2. Direct interpolation is permissible. Do not extrapolate.
TC : Total Capacity [kW] 3. Capacities are based on the following conditions.
SHC : Sensible Heating Capacity [kW] – Interconnecting Piping Length 7.5 m
PI : Power Input [kW] – Level Difference of Zero.
(Comp.+ Indoor Fan Motor + Outdoor Fan Motor)

61
Inverter Single Wall Mounted - 50/60 Hz (R410A)
8. Capacity Tables

VM242C7.SK0 (US-Q242K2P0), VR242C7.SK0 (US-Q242KRP0)


Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 4.69 4.07 0.99 5.12 4.18 1.05 5.55 4.30 1.10 6.08 4.44 1.18 6.40 4.53 1.22 6.76 5.03 1.27 7.25 5.72 1.34
20 4.67 4.05 1.02 5.08 4.17 1.08 5.49 4.30 1.13 6.01 4.46 1.20 6.32 4.55 1.24 6.67 5.04 1.29 7.17 5.70 1.36
25 4.81 4.04 1.26 5.20 4.20 1.32 5.58 4.37 1.37 6.07 4.58 1.44 6.36 4.70 1.49 6.73 5.14 1.54 7.25 5.75 1.62
30 4.96 4.03 1.50 5.32 4.23 1.56 5.68 4.44 1.62 6.13 4.69 1.69 6.41 4.85 1.73 6.80 5.24 1.79 7.34 5.78 1.87
35 5.12 4.01 1.76 5.45 4.26 1.81 5.79 4.51 1.87 6.20 4.81 1.94 6.45 5.00 1.98 6.86 5.34 2.04 7.43 5.82 2.13
41 4.73 3.58 1.83 5.07 3.83 1.89 5.41 4.08 1.95 5.83 4.40 2.02 6.09 4.59 2.07 6.46 4.88 2.13 6.97 5.28 2.22
46 4.15 3.03 1.86 4.46 3.26 1.91 4.78 3.49 1.97 5.17 3.78 2.05 5.41 3.95 2.09 5.73 4.19 2.16 6.18 4.51 2.24
48 4.04 2.95 1.87 4.35 3.18 1.93 4.66 3.40 1.99 5.04 3.69 2.06 5.27 3.86 2.11 5.59 4.09 2.17 6.04 4.41 2.26

VM242C6.SK1 (US-Q242K3W0)
Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 4.69 4.07 0.99 5.12 4.18 1.05 5.55 4.30 1.10 6.08 4.44 1.18 6.40 4.53 1.22 6.76 5.03 1.27 7.25 5.72 1.34
20 4.67 4.05 1.02 5.08 4.17 1.08 5.49 4.30 1.13 6.01 4.46 1.20 6.32 4.55 1.24 6.67 5.04 1.29 7.17 5.70 1.36
25 4.81 4.04 1.30 5.20 4.20 1.36 5.58 4.37 1.42 6.07 4.58 1.50 6.36 4.70 1.54 6.73 5.14 1.60 7.25 5.75 1.68
30 4.96 4.03 1.60 5.32 4.23 1.66 5.68 4.44 1.72 6.13 4.69 1.79 6.41 4.85 1.84 6.80 5.24 1.90 7.34 5.78 1.99
35 5.12 4.01 1.90 5.45 4.26 1.96 5.79 4.51 2.02 6.20 4.81 2.09 6.45 5.00 2.14 6.86 5.34 2.21 7.43 5.82 2.30
41 4.40 3.45 1.76 4.71 3.69 1.82 5.03 3.94 1.88 5.42 4.24 1.95 5.66 4.42 1.99 6.01 4.70 2.05 6.48 5.08 2.13
46 3.54 2.79 1.59 3.81 3.00 1.64 4.07 3.22 1.69 4.41 3.48 1.75 4.61 3.64 1.79 4.89 3.86 1.84 5.27 4.16 1.92
48 3.45 2.72 1.60 3.71 2.93 1.65 3.97 3.14 1.70 4.30 3.40 1.76 4.50 3.55 1.80 4.77 3.77 1.86 5.15 4.06 1.94

Symbol Note
DB : Dry Bulb Temperature [୅] 1. All capacities are net, evaporator fan motor heat is deducted.
WB : Wet Bulb Temperature [୅] 2. Direct interpolation is permissible. Do not extrapolate.
TC : Total Capacity [kW] 3. Capacities are based on the following conditions.
SHC : Sensible Heating Capacity [kW] – Interconnecting Piping Length 7.5 m
PI : Power Input [kW] – Level Difference of Zero.
(Comp.+ Indoor Fan Motor + Outdoor Fan Motor)

62
Inverter Single Wall Mounted - 50/60 Hz (R410A)
8. Capacity Tables

VM092C7.SS1 (US-Q092J2P0), VR092C7.SS1 (US-Q092JRP0)


Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 2.28 2.15 0.38 2.48 2.21 0.40 2.69 2.27 0.42 2.95 2.34 0.45 3.10 2.39 0.47 3.27 2.65 0.49 3.51 3.02 0.51
20 2.26 2.14 0.39 2.46 2.20 0.41 2.66 2.27 0.43 2.91 2.35 0.46 3.06 2.40 0.48 3.24 2.66 0.50 3.47 3.01 0.52
25 2.22 2.06 0.47 2.40 2.14 0.50 2.58 2.23 0.52 2.81 2.33 0.54 2.94 2.40 0.56 3.11 2.62 0.58 3.35 2.93 0.61
30 2.18 1.99 0.56 2.34 2.09 0.58 2.50 2.19 0.60 2.70 2.31 0.63 2.82 2.39 0.65 2.99 2.58 0.67 3.23 2.85 0.70
35 2.14 1.91 0.65 2.28 2.03 0.67 2.42 2.15 0.69 2.60 2.29 0.71 2.70 2.38 0.73 2.87 2.55 0.75 3.11 2.77 0.78
41 2.32 1.85 0.93 2.49 1.98 0.96 2.65 2.11 0.98 2.86 2.27 1.02 2.99 2.37 1.04 3.17 2.52 1.08 3.42 2.72 1.12
46 2.37 1.70 1.16 2.55 1.83 1.20 2.72 1.96 1.24 2.95 2.13 1.28 3.08 2.22 1.31 3.27 2.36 1.35 3.53 2.54 1.41
48 2.31 1.66 1.17 2.48 1.79 1.21 2.66 1.92 1.25 2.88 2.07 1.29 3.01 2.17 1.32 3.19 2.30 1.36 3.44 2.48 1.42

VM122C7.SS1 (US-Q122J2P0), VR122C7.SS1 (US-Q122JRP0)


Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 2.28 2.15 0.38 2.48 2.21 0.40 2.69 2.27 0.42 2.95 2.34 0.45 3.10 2.39 0.47 3.27 2.65 0.49 3.51 3.02 0.51
20 2.26 2.14 0.39 2.46 2.20 0.41 2.66 2.27 0.43 2.91 2.35 0.46 3.06 2.40 0.48 3.24 2.66 0.50 3.47 3.01 0.52
25 2.43 2.18 0.56 2.63 2.27 0.58 2.82 2.36 0.61 3.07 2.47 0.64 3.21 2.54 0.66 3.40 2.78 0.68 3.66 3.10 0.72
30 2.61 2.22 0.73 2.80 2.34 0.76 2.99 2.45 0.79 3.22 2.59 0.82 3.37 2.68 0.84 3.57 2.89 0.87 3.86 3.19 0.91
35 2.80 2.26 0.91 2.98 2.40 0.94 3.16 2.54 0.97 3.38 2.71 1.00 3.52 2.81 1.03 3.74 3.01 1.06 4.05 3.27 1.10
41 2.64 2.01 1.05 2.83 2.16 1.09 3.01 2.30 1.12 3.25 2.47 1.16 3.39 2.58 1.19 3.60 2.74 1.23 3.89 2.97 1.28
46 2.37 1.70 1.16 2.55 1.83 1.20 2.72 1.96 1.24 2.95 2.13 1.28 3.08 2.22 1.31 3.27 2.36 1.35 3.53 2.54 1.41
48 2.31 1.66 1.17 2.48 1.79 1.21 2.66 1.92 1.25 2.88 2.07 1.29 3.01 2.17 1.32 3.19 2.30 1.36 3.44 2.48 1.42

VM092C6.SS0 (US-Q092J3W0)
Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 2.28 2.15 0.38 2.48 2.21 0.40 2.69 2.27 0.42 2.95 2.34 0.45 3.10 2.39 0.47 3.27 2.65 0.49 3.51 3.02 0.51
20 2.26 2.14 0.39 2.46 2.20 0.41 2.66 2.27 0.43 2.91 2.35 0.46 3.06 2.40 0.48 3.24 2.66 0.50 3.47 3.01 0.52
25 2.22 2.03 0.50 2.40 2.11 0.52 2.58 2.20 0.54 2.81 2.30 0.57 2.94 2.36 0.59 3.11 2.58 0.61 3.35 2.89 0.64
30 2.18 1.93 0.61 2.34 2.03 0.63 2.50 2.13 0.65 2.70 2.25 0.68 2.82 2.32 0.70 2.99 2.51 0.72 3.23 2.77 0.75
35 2.14 1.84 0.72 2.28 1.95 0.74 2.42 2.06 0.76 2.60 2.20 0.79 2.70 2.29 0.81 2.87 2.44 0.84 3.11 2.66 0.87
41 2.10 1.66 0.88 2.25 1.78 0.91 2.40 1.90 0.94 2.59 2.05 0.98 2.70 2.13 1.00 2.87 2.27 1.03 3.09 2.45 1.07
46 1.95 1.43 1.02 2.10 1.54 1.05 2.25 1.65 1.08 2.44 1.79 1.12 2.55 1.87 1.15 2.70 1.98 1.18 2.91 2.14 1.23
48 1.90 1.40 1.02 2.05 1.51 1.06 2.19 1.61 1.09 2.38 1.75 1.13 2.48 1.83 1.15 2.64 1.94 1.19 2.84 2.09 1.24

Symbol Note
DB : Dry Bulb Temperature [୅] 1. All capacities are net, evaporator fan motor heat is deducted.
WB : Wet Bulb Temperature [୅] 2. Direct interpolation is permissible. Do not extrapolate.
TC : Total Capacity [kW] 3. Capacities are based on the following conditions.
SHC : Sensible Heating Capacity [kW] – Interconnecting Piping Length 7.5 m
PI : Power Input [kW] – Level Difference of Zero.
(Comp.+ Indoor Fan Motor + Outdoor Fan Motor)

63
Inverter Single Wall Mounted - 50/60 Hz (R410A)
8. Capacity Tables

VM121C6.SS0 (US-Q121J3W0)
Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 2.21 2.09 0.37 2.41 2.15 0.39 2.61 2.21 0.41 2.86 2.28 0.44 3.01 2.32 0.45 3.18 2.58 0.47 3.41 2.93 0.50
20 2.19 2.08 0.38 2.39 2.14 0.40 2.58 2.21 0.42 2.82 2.29 0.45 2.97 2.34 0.46 3.14 2.58 0.48 3.37 2.93 0.50
25 2.38 2.11 0.57 2.58 2.20 0.59 2.77 2.29 0.62 3.01 2.39 0.65 3.15 2.46 0.67 3.34 2.69 0.70 3.59 3.00 0.73
30 2.58 2.14 0.77 2.77 2.25 0.80 2.96 2.36 0.82 3.20 2.50 0.86 3.34 2.58 0.88 3.54 2.79 0.91 3.82 3.08 0.95
35 2.80 2.17 0.97 2.98 2.31 1.00 3.16 2.44 1.03 3.38 2.60 1.07 3.52 2.70 1.10 3.74 2.89 1.13 4.05 3.15 1.18
41 2.29 1.83 0.95 2.45 1.96 0.98 2.62 2.09 1.01 2.82 2.25 1.05 2.94 2.35 1.07 3.12 2.50 1.11 3.37 2.70 1.15
46 1.72 1.45 0.91 1.85 1.56 0.94 1.98 1.67 0.96 2.15 1.81 1.00 2.25 1.89 1.02 2.38 2.00 1.05 2.57 2.16 1.10
48 1.68 1.41 0.91 1.81 1.52 0.94 1.93 1.63 0.97 2.09 1.76 1.01 2.19 1.85 1.03 2.32 1.96 1.06 2.51 2.11 1.11

VM122C6.SS0 (US-Q122J3W0)
Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 2.28 2.15 0.38 2.48 2.21 0.40 2.69 2.27 0.42 2.95 2.34 0.45 3.10 2.39 0.47 3.27 2.65 0.49 3.51 3.02 0.51
20 2.26 2.14 0.39 2.46 2.20 0.41 2.66 2.27 0.43 2.91 2.35 0.46 3.06 2.40 0.48 3.24 2.66 0.50 3.47 3.01 0.52
25 2.43 2.18 0.58 2.63 2.27 0.60 2.82 2.36 0.63 3.07 2.47 0.66 3.21 2.54 0.68 3.40 2.78 0.71 3.66 3.10 0.74
30 2.61 2.22 0.77 2.80 2.34 0.80 2.99 2.45 0.83 3.22 2.59 0.87 3.37 2.68 0.89 3.57 2.89 0.92 3.86 3.19 0.96
35 2.80 2.26 0.97 2.98 2.40 1.00 3.16 2.54 1.03 3.38 2.71 1.07 3.52 2.81 1.10 3.74 3.01 1.13 4.05 3.27 1.18
41 2.41 1.87 1.01 2.59 2.00 1.04 2.76 2.13 1.07 2.98 2.30 1.11 3.11 2.39 1.14 3.30 2.54 1.17 3.56 2.75 1.22
46 1.95 1.43 1.02 2.10 1.54 1.05 2.25 1.65 1.08 2.44 1.79 1.12 2.55 1.87 1.15 2.70 1.98 1.18 2.91 2.14 1.23
48 1.90 1.40 1.02 2.05 1.51 1.06 2.19 1.61 1.09 2.38 1.75 1.13 2.48 1.83 1.15 2.64 1.94 1.19 2.84 2.09 1.24

VM182C7.SS1 (US-Q182K2P0), VR182C7.SS1 (US-Q182KRP0)


Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 4.38 3.53 1.00 4.78 3.63 1.05 5.18 3.73 1.11 5.67 3.85 1.18 5.97 3.93 1.23 6.30 4.36 1.28 6.76 4.96 1.35
20 4.36 3.51 1.03 4.74 3.62 1.08 5.13 3.73 1.14 5.61 3.87 1.21 5.90 3.95 1.25 6.23 4.37 1.30 6.69 4.95 1.37
25 4.30 3.46 1.14 4.65 3.60 1.19 5.00 3.74 1.24 5.43 3.92 1.31 5.69 4.02 1.35 6.02 4.40 1.40 6.48 4.91 1.46
30 4.25 3.40 1.25 4.56 3.57 1.30 4.87 3.75 1.35 5.25 3.96 1.41 5.49 4.09 1.44 5.82 4.42 1.49 6.28 4.88 1.56
35 4.19 3.35 1.37 4.46 3.55 1.41 4.74 3.75 1.45 5.08 4.01 1.51 5.28 4.16 1.54 5.62 4.45 1.59 6.08 4.85 1.65
41 3.67 3.04 1.39 3.93 3.26 1.44 4.20 3.47 1.48 4.53 3.74 1.54 4.73 3.90 1.57 5.01 4.14 1.62 5.41 4.48 1.68
46 3.03 2.63 1.38 3.26 2.83 1.42 3.48 3.03 1.46 3.77 3.28 1.52 3.94 3.44 1.55 4.18 3.64 1.60 4.51 3.92 1.66
48 2.95 2.57 1.39 3.17 2.76 1.43 3.40 2.96 1.47 3.68 3.21 1.53 3.85 3.35 1.56 4.08 3.55 1.61 4.40 3.83 1.68

VM182C6.SS2 (US-Q182K3W2)
Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 4.38 3.53 1.00 4.78 3.63 1.05 5.18 3.73 1.11 5.67 3.85 1.18 5.97 3.93 1.23 6.30 4.36 1.28 6.76 4.96 1.35
20 4.36 3.51 1.03 4.74 3.62 1.08 5.13 3.73 1.14 5.61 3.87 1.21 5.90 3.95 1.25 6.23 4.37 1.30 6.69 4.95 1.37
25 4.30 3.46 1.17 4.65 3.60 1.22 5.00 3.74 1.27 5.43 3.92 1.34 5.69 4.02 1.38 6.02 4.40 1.43 6.48 4.91 1.50
30 4.25 3.40 1.31 4.56 3.57 1.36 4.87 3.75 1.41 5.25 3.96 1.47 5.49 4.09 1.51 5.82 4.42 1.56 6.28 4.88 1.63
35 4.19 3.35 1.45 4.46 3.55 1.50 4.74 3.75 1.55 5.08 4.01 1.61 5.28 4.16 1.64 5.62 4.45 1.69 6.08 4.85 1.76
41 3.67 3.04 1.43 3.93 3.26 1.48 4.20 3.47 1.53 4.53 3.74 1.58 4.73 3.90 1.62 5.01 4.14 1.67 5.41 4.48 1.74
46 3.03 2.63 1.38 3.26 2.83 1.42 3.48 3.03 1.46 3.77 3.28 1.52 3.94 3.44 1.55 4.18 3.64 1.60 4.51 3.92 1.66
48 2.95 2.57 1.39 3.17 2.76 1.43 3.40 2.96 1.47 3.68 3.21 1.53 3.85 3.35 1.56 4.08 3.55 1.61 4.40 3.83 1.68

Symbol Note
DB : Dry Bulb Temperature [୅] 1. All capacities are net, evaporator fan motor heat is deducted.
WB : Wet Bulb Temperature [୅] 2. Direct interpolation is permissible. Do not extrapolate.
TC : Total Capacity [kW] 3. Capacities are based on the following conditions.
SHC : Sensible Heating Capacity [kW] – Interconnecting Piping Length 7.5 m
PI : Power Input [kW] – Level Difference of Zero.
(Comp.+ Indoor Fan Motor + Outdoor Fan Motor)

64
Inverter Single Wall Mounted - 50/60 Hz (R410A)
8. Capacity Tables

VM242C7.SS1 (US-Q242K2P0), VR242C7.SS1 (US-Q242KRP0)


Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 4.69 4.07 0.99 5.12 4.18 1.05 5.55 4.30 1.10 6.08 4.44 1.18 6.40 4.53 1.22 6.76 5.03 1.27 7.25 5.72 1.34
20 4.67 4.05 1.02 5.08 4.17 1.08 5.49 4.30 1.13 6.01 4.46 1.20 6.32 4.55 1.24 6.67 5.04 1.29 7.17 5.70 1.36
25 4.81 4.04 1.23 5.20 4.20 1.29 5.58 4.37 1.34 6.07 4.58 1.41 6.36 4.70 1.45 6.73 5.14 1.51 7.25 5.75 1.58
30 4.96 4.03 1.45 5.32 4.23 1.50 5.68 4.44 1.56 6.13 4.69 1.63 6.41 4.85 1.67 6.80 5.24 1.72 7.34 5.78 1.80
35 5.12 4.01 1.67 5.45 4.26 1.72 5.79 4.51 1.77 6.20 4.81 1.84 6.45 5.00 1.88 6.86 5.34 1.94 7.43 5.82 2.02
41 4.73 3.58 1.79 5.07 3.83 1.85 5.41 4.08 1.90 5.83 4.40 1.98 6.09 4.59 2.02 6.46 4.88 2.08 6.97 5.28 2.16
46 4.15 3.03 1.86 4.46 3.26 1.91 4.78 3.49 1.97 5.17 3.78 2.05 5.41 3.95 2.09 5.73 4.19 2.16 6.18 4.51 2.24
48 4.04 2.95 1.87 4.35 3.18 1.93 4.66 3.40 1.99 5.04 3.69 2.06 5.27 3.86 2.11 5.59 4.09 2.17 6.04 4.41 2.26

VM242C6.SS0 (US-Q242K3W0)
Outdoor Air Indoor Air Temperature : ୅ DB / ୅ WB
Temperature 18 / 12 20 / 14 22 / 16 25 / 18 27 / 19 29 / 19 32 / 23
୅ DB TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
18 4.69 4.07 0.99 5.12 4.18 1.05 5.55 4.30 1.10 6.08 4.44 1.18 6.40 4.53 1.22 6.76 5.03 1.27 7.25 5.72 1.34
20 4.67 4.05 1.02 5.08 4.17 1.08 5.49 4.30 1.13 6.01 4.46 1.20 6.32 4.55 1.24 6.67 5.04 1.29 7.17 5.70 1.36
25 4.81 4.04 1.27 5.20 4.20 1.32 5.58 4.37 1.38 6.07 4.58 1.45 6.36 4.70 1.50 6.73 5.14 1.55 7.25 5.75 1.63
30 4.96 4.03 1.52 5.32 4.23 1.58 5.68 4.44 1.64 6.13 4.69 1.71 6.41 4.85 1.75 6.80 5.24 1.81 7.34 5.78 1.89
35 5.12 4.01 1.78 5.45 4.26 1.84 5.79 4.51 1.90 6.20 4.81 1.97 6.45 5.00 2.01 6.86 5.34 2.07 7.43 5.82 2.16
41 4.40 3.45 1.71 4.71 3.69 1.76 5.03 3.94 1.82 5.42 4.24 1.88 5.66 4.42 1.93 6.01 4.70 1.98 6.48 5.08 2.06
46 3.54 2.79 1.59 3.81 3.00 1.64 4.07 3.22 1.69 4.41 3.48 1.75 4.61 3.64 1.79 4.89 3.86 1.84 5.27 4.16 1.92
48 3.45 2.72 1.60 3.71 2.93 1.65 3.97 3.14 1.70 4.30 3.40 1.76 4.50 3.55 1.80 4.77 3.77 1.86 5.15 4.06 1.94

Symbol Note
DB : Dry Bulb Temperature [୅] 1. All capacities are net, evaporator fan motor heat is deducted.
WB : Wet Bulb Temperature [୅] 2. Direct interpolation is permissible. Do not extrapolate.
TC : Total Capacity [kW] 3. Capacities are based on the following conditions.
SHC : Sensible Heating Capacity [kW] – Interconnecting Piping Length 7.5 m
PI : Power Input [kW] – Level Difference of Zero.
(Comp.+ Indoor Fan Motor + Outdoor Fan Motor)

65
Inverter Single Wall Mounted - 50/60 Hz (R410A)
9. Capacity Coefficient Factor
9.1 Capacity Change Rate (%)
Refrigerant Pipe Length
Model m 5 7.5 10 15 20 25 30 35 40 45 50
ft. 16.4 24.6 32.8 49.2 65.6 82.0 98.4 114.8 131.2 147.6 164.0
VM092C7 (US-Q092J2P0)
VM122C7 (US-Q122J2P0) Cooling 100 100 97.3 92.0 - - - - - - -
VM121C7 (US-Q121J2P0)
VR092C7 (US-Q092JRP0)
VR122C7 (US-Q122JRP0)
VM092C6 (US-Q092J3W0)
VM122C6 (US-Q122J3W0) Heating - - - - - - - - - - -
VM121C6 (US-Q121J3W0)
VM182C7 (US-Q182K2P0) Cooling 100 100 99.6 98.9 98.2 - - - - - -
VR182C7 (US-Q182KRP0) Heating - - - - - - - - - - -
VM242C7 (US-Q242K2P0) Cooling 100 100 99.5 98.6 97.7 - - - - - -
VR242C7 (US-Q242KRP0) Heating - - - - - - - - - - -
VM182C6 (US-Q182K3W0) Cooling 100 100 99.6 98.9 98.2 - - - - - -
VM182C6 (US-Q182K3W2) Heating - - - - - - - - - - -
Cooling 100 100 99.7 99.2 98.7 - - - - - -
VM242C6 (US-Q242K3W0)
Heating - - - - - - - - - - -

66
Inverter Single Wall Mounted - 50/60 Hz (R410A)
9. Capacity Coefficient Factor
9.2 Pipe Size, Length and Elevation
Pipe Size Standard Min. / Max. No Charge
Max. Additional
Gas Liquid Pipe Pipe Pipe
Model Elevation Refrigerant
Length Length Length
mm inch mm inch ྀ [m (ft.)] [g/m (oz./ft.)]
[m (ft.)] ཿ [m (ft.)] [m (ft.)]
VM092C7 (US-Q092J2P0)
VM122C7 (US-Q122J2P0)
VM121C7 (US-Q121J2P0)
VR092C7 (US-Q092JRP0) 3.6 / 15
Ø 9.52 Ø 3/8 Ø 6.35 Ø 1/4 7.5 (24.6) 7 (23) 20 (0.22) 7.5 (24.6)
VR122C7 (US-Q122JRP0) (11.8 / 49.2)
VM092C6 (US-Q092J3W0)
VM122C6 (US-Q122J3W0)
VM121C6 (US-Q121J3W0)
VM182C7 (US-Q182K2P0)
VR182C7 (US-Q182KRP0) 3.6 / 20
Ø 12.7 Ø 1/2 Ø 6.35 Ø 1/4 7.5 (24.6) 10 (32.8) 20 (0.22) 7.5 (24.6)
VM182C6 (US-Q182K3W0) (11.8 / 65.6)
VM182C6 (US-Q182K3W2)
VM242C7 (US-Q242K2P0)
3.6 / 20
VR242C7 (US-Q242KRP0) Ø 15.88 Ø 5/8 Ø 6.35 Ø 1/4 7.5 (24.6) 10 (32.8) 20 (0.22) 7.5 (24.6)
(11.8 / 65.6)
VM242C6 (US-Q242K3W0)

Indoor unit Outdoor unit


! WARNING
A A
• It may cause reliability, performance, noise, and vibration problem,
Outdoor unit Indoor unit if piping limitations are not met. Keep minimum piping length by
B B
making loops, although indoor unit and outdoor unit are close.

67
Inverter Single Wall Mounted - 50/60 Hz (R410A)
9. Capacity Coefficient Factor
9.3 Additional Refrigerant Charge
Refrigerant Pipe Length
Model m 5 7.5 10 12.5 15 20 25 30 35 40 45 50
ft. 16.4 24.6 32.8 41.0 49.2 65.6 82.0 98.4 114.8 131.2 147.6 164.0
VM092C7 (US-Q092J2P0)
VM122C7 (US-Q122J2P0)
VM121C7 (US-Q121J2P0)
VR092C7 (US-Q092JRP0) 50 100 150
0 0 - - - - - - -
VR122C7 (US-Q122JRP0) (1.8) (3.6) (5.4)
VM092C6 (US-Q092J3W0)
VM122C6 (US-Q122J3W0)
VM121C6 (US-Q121J3W0)
VM182C7 (US-Q182K2P0)
VR182C7 (US-Q182KRP0) Additional 50 100 150 250
Charge [g 0 0 - - - - - -
VM182C6 (US-Q182K3W0) (oz.)] (1.8) (3.6) (5.4) (9.0)
VM182C6 (US-Q182K3W2)
VM092C7 (US-Q092J2P0)
VM122C7 (US-Q122J2P0)
VM121C7 (US-Q121J2P0)
VR092C7 (US-Q092JRP0) 50 100 150 250
0 0 - - - - - -
VR122C7 (US-Q122JRP0) (1.8) (3.6) (5.4) (9.0)
VM092C6 (US-Q092J3W0)
VM122C6 (US-Q122J3W0)
VM121C6 (US-Q121J3W0)

Note
• Capacity is based on standard length and maximum allowance length is on the basis of reliability.
• Equivalent Pipe Length = Actual Pipe Length + Number of Bends x 0.3
• Calculation : X g (oz.) = [ (Refrigerant Pipe Length) - (No Charge Pipe Length) ] × (Additional Refrigerant)
• There is no need to charge refrigerant till no charge pipe length based on reliability

68
Inverter Single Wall Mounted - 50/60 Hz (R410A)
10. Operation Range
VR092C7 (US-Q092JRP0), VR122C7 (US-Q122JRP0), VR182C7 (US-Q182KRP0), VR242C7 (US-Q242KRP0),
VM092C7 (US-Q092J2P0), VM122C7 (US-Q122J2P0), VM182C7 (US-Q182K2P0), VM242C7 (US-Q242K2P0),
VM121C7 (US-Q121J2P0), VM092C6 (US-Q092J3W0), VM122C6 (US-Q122J3W0), VM182C6 (US-Q182K3W0),
VM182C6 (US-Q182K3W2), VM242C6 (US-Q242K3W0), VM121C6 (US-Q121J3W0)

Cooling

48 (118)

Outdoor Temp.
Continuous
[ഒ (ഘ) DB]
Operation

18 (64)

12 (53) 23 (73)

Indoor Temp. [ഒ (ഘ) WB]

Note
The figures are based on the following conditions :
– Equivalent Piping Length : 7.5 m (24.6 ft.)
– Level Difference : 0 m (0 ft.)

69
Inverter Single Wall Mounted - 50/60 Hz (R410A)
11. Air Flow and Temperature Distributions (Reference Data)
VM092C7 (US-Q092J2P0), VR092C7 (US-Q092JRP0), VM092C6 (US-Q092J3W0)

Cooling

Air Velocity [m/s (ft./s)] Temperature [ഒ (ഘ)]

m ft. m ft.
2 6.6 22(72) 2 6.6
24(75)
2(6.6)
1 3.3 26(79) 1 3.3
0.3(1) 0.5(1.6) 1(3.3) 28(82)
0 0 0 0
m 10 8 6 4 2 0 m 10 8 6 4 2 0
ft. 32.8 26.2 19.7 13.1 6.6 0 ft. 32.8 26.2 19.7 13.1 6.6 0

Side View
Discharge Angle : 35˚ (From the floor )
Vertical Louver : Center
Fan Speed : Power

Air Velocity [m/s (ft./s)] Air Velocity [m/s (ft./s)]


m ft. m ft.
5 16.4 5 16.4
0.3(1)
4 13.1 4 13.1

0.5(1.6) 3 9.8 3 9.8

2 6.6 2 6.6
1(3.3)
0.5(1.6)
1(3.3) 1 3.3 1 3.3
0.3(1) 2(6.6)
2(6.6) 0 0 0 0
0.3(1) 2(6.6)
1 3.3 1 3.3
0.5(1.6)
1(3.3)
2 6.6 2 6.6

3 9.8 3 9.8

4 13.1 4 13.1

5 16.4 5 16.4
m 10 8 6 4 2 0 m 10 8 6 4 2 0
ft. 32.8 26.2 19.7 13.1 6.6 0 ft. 32.8 26.2 19.7 13.1 6.6 0

Top View Top View


Discharge Angle : 35˚ (From the floor ) Discharge Angle : 35˚ (From the floor )
Vertical Louver : Center Vertical Louver : Left & Right
Fan Speed : Power Fan Speed : Power
Air Speed 0.3 m/s (1 ft./s) Range : 13.0 m (42.7 ft.)

70
Inverter Single Wall Mounted - 50/60 Hz (R410A)
11. Air Flow and Temperature Distributions (Reference Data)
VM122C7 (US-Q122J2P0), VM121C7 (US-Q121J2P0), VR122C7 (US-Q122JRP0),
VM122C6 (US-Q122J3W0), VM121C6 (US-Q121J3W0)

Cooling

Air Velocity [m/s (ft./s)] Temperature [ഒ (ഘ)]

m ft. m ft.
2 6.6 22(72) 2 6.6
2(6.6) 24(75)
1 3.3 1 3.3
26(79)
0.3(1) 0.5(1.6) 1(3.3) 28(82)
0 0 0 0
m 10 8 6 4 2 0 m 10 8 6 4 2 0
ft. 32.8 26.2 19.7 13.1 6.6 0 ft. 32.8 26.2 19.7 13.1 6.6 0

Side View
Discharge Angle : 35˚ (From the floor )
Vertical Louver : Center
Fan Speed : Power

Air Velocity [m/s (ft./s)] Air Velocity [m/s (ft./s)]


m ft. m ft.
5 16.4 5 16.4
0.3(1)
4 13.1 4 13.1

0.5(1.6) 3 9.8 3 9.8


1(3.3)
2 6.6 2 6.6
1(3.3) 1 3.3 0.3(1) 0.5(1.6) 1 3.3
2(6.6)
2(6.6) 0 0 0 0
2(6.6)
1 3.3 0.3(1) 0.5(1.6) 1 3.3

2 6.6 2 6.6
1(3.3)
3 9.8 3 9.8

4 13.1 4 13.1

5 16.4 5 16.4
m 10 8 6 4 2 0 m 10 8 6 4 2 0
ft. 32.8 26.2 19.7 13.1 6.6 0 ft. 32.8 26.2 19.7 13.1 6.6 0

Top View Top View


Discharge Angle : 35˚ (From the floor ) Discharge Angle : 35˚ (From the floor )
Vertical Louver : Center Vertical Louver : Left & Right
Fan Speed : Power Fan Speed : Power
Air Speed 0.3 m/s (1 ft./s) Range : 13.0 m (42.7 ft.)

71
Inverter Single Wall Mounted - 50/60 Hz (R410A)
11. Air Flow and Temperature Distributions (Reference Data)
VM182C7 (US-Q182K2P0), VR182C7 (US-Q182KRP0), VM182C6 (US-Q182K3W0),
VM182C6 (US-Q182K3W2)

Cooling

Air Velocity [m/s (ft./s)] Temperature [ഒ (ഘ)]

m ft. m ft.
2 6.6 18(64) 2 6.6
2(6.6) 22(72)
1.5(4.9) 28(82) 24(75)
1 3.3 1 3.3
0.3(1) 0.5(1.6) 26(79)
1(3.3)
0 0 0 0
m 10 8 6 4 2 0 m 10 8 6 4 2 0
ft. 32.8 26.2 19.7 13.1 6.6 0 ft. 32.8 26.2 19.7 13.1 6.6 0

Side View
Discharge Angle : 25˚ (From the floor )
Vertical Louver : Center
Fan Speed : Power

Air Velocity [m/s (ft./s)] Air Velocity [m/s (ft./s)]


m ft. m ft.
5 16.4 5 16.4
0.5(1.6)
0.3(1)
4 13.1 4 13.1

0.5(1.6) 3 9.8 3 9.8


1(3.3)
2 6.6 2 6.6

1(3.3) 1 3.3 2(6.6) 1 3.3


0.3(1)
2(6.6) 0 0 0 0

1 3.3 0.3(1) 2(6.6) 1 3.3

2 6.6 2 6.6
1(3.3)
3 9.8 3 9.8

4 13.1 4 13.1
0.5(1.6)
5 16.4 5 16.4
m 10 8 6 4 2 0 m 10 8 6 4 2 0
ft. 32.8 26.2 19.7 13.1 6.6 0 ft. 32.8 26.2 19.7 13.1 6.6 0

Top View Top View


Discharge Angle : 25˚ (From the floor ) Discharge Angle : 25˚ (From the floor )
Vertical Louver : Center Vertical Louver : Left & Right
Fan Speed : Power Fan Speed : Power
Air Speed 0.3 m/s (1 ft./s) Range : 15.4 m (50.5 ft.)

72
Inverter Single Wall Mounted - 50/60 Hz (R410A)
11. Air Flow and Temperature Distributions (Reference Data)
VM242C6 (US-Q242K3W0)

Cooling

Air Velocity [m/s (ft./s)] Temperature [ഒ (ഘ)]

m ft. m ft.
2(6.6) 2 6.6 20(68) 2 6.6
28(82) 22(72)
1(3.3) 1 3.3 24(75) 1 3.3
26(79)
0.3(1) 0.5(1.6)
0 0 0 0
m 10 8 6 4 2 0 m 10 8 6 4 2 0
ft. 32.8 26.2 19.7 13.1 6.6 0 ft. 32.8 26.2 19.7 13.1 6.6 0

Side View
Discharge Angle : 25˚ (From the floor )
Vertical Louver : Center
Fan Speed : Power

Air Velocity [m/s (ft./s)] Air Velocity [m/s (ft./s)]


m ft. m ft.
5 16.4 5 16.4
0.3(1) 0.3(1)
4 13.1 1(3.3) 4 13.1

0.5(1.6) 3 9.8 3 9.8

2 6.6 2 6.6
0.5(1.6)
1(3.3) 1 3.3 2(6.6) 1 3.3

2(6.6) 0 0 0 0
2(6.6)
1 3.3 0.5(1.6) 1 3.3

2 6.6 2 6.6

3 9.8 3 9.8
1(3.3)
4 13.1 4 13.1
0.3(1)
5 16.4 5 16.4
m 10 8 6 4 2 0 m 10 8 6 4 2 0
ft. 32.8 26.2 19.7 13.1 6.6 0 ft. 32.8 26.2 19.7 13.1 6.6 0

Top View Top View


Discharge Angle : 25˚ (From the floor ) Discharge Angle : 25˚ (From the floor )
Vertical Louver : Center Vertical Louver : Left & Right
Fan Speed : Power Fan Speed : Power
Air Speed 0.3 m/s (1 ft./s) Range : 16.5 m (54.1 ft.)

73
Inverter Single Wall Mounted - 50/60 Hz (R410A)
11. Air Flow and Temperature Distributions (Reference Data)
VM242C7 (US-Q242K2P0), VR242C7 (US-Q242KRP0)

Cooling

Air Velocity [m/s (ft./s)] Temperature [ഒ (ഘ)]

m ft. m ft.
2 6.6 20(68) 2 6.6
22(72)
2(6.6)
1 3.3 28(82) 24(75) 1 3.3
0.3(1) 0.5(1.6) 26(79)
1(3.3)
0 0 0 0
m 10 8 6 4 2 0 m 10 8 6 4 2 0
ft. 32.8 26.2 19.7 13.1 6.6 0 ft. 32.8 26.2 19.7 13.1 6.6 0

Side View
Discharge Angle : 25˚ (From the floor )
Vertical Louver : Center
Fan Speed : Power

Air Velocity [m/s (ft./s)] Air Velocity [m/s (ft./s)]


m ft. m ft.
5 16.4 5 16.4
0.3(1) 0.3(1)
4 13.1 4 13.1

3 9.8 1(3.3) 3 9.8


0.5(1.6)
2 6.6 2 6.6

1(3.3) 1 3.3 0.5(1.6) 2(6.6) 1 3.3

2(6.6) 0 0 0 0
0.5(1.6) 2(6.6)
1 3.3 1 3.3

2 6.6 2 6.6
1(3.3)
3 9.8 3 9.8

4 13.1 0.3(1) 4 13.1

5 16.4 5 16.4
m 10 8 6 4 2 0 m 10 8 6 4 2 0
ft. 32.8 26.2 19.7 13.1 6.6 0 ft. 32.8 26.2 19.7 13.1 6.6 0

Top View Top View


Discharge Angle : 25˚ (From the floor ) Discharge Angle : 25˚ (From the floor )
Vertical Louver : Center Vertical Louver : Left & Right
Fan Speed : Power Fan Speed : Power
Air Speed 0.3 m/s (1 ft./s) Range : 15.8 m (51.8 ft.)

74
Inverter Single Wall Mounted - 50/60 Hz (R410A)
12. Sound Levels (Reference Data)
12.1 Sound Pressure Level (Indoor Unit)

Unit : m (ft.) Note


• Sound measured at 1 m (3.3 ft) away from the unit.
1 (3.3) • Data is valid at free field condition.
• Data is valid at nominal operation condition.
0.8 (2.6)
• Reference acoustic pressure 0dB=20μPa.
Microphone
• Sound level will vary depending on a range of factors such as the
construction(acoustic absorption coefficient) of particular room in
which the equipment is installed.
• The operating conditions are assumed to be standard.
• Sound pressure level is measured on the rated condition in the
anechoic rooms by ISO 3745 standard.
• Sound level is measured in an anechoic room and may be
different according to the test condition or equipment.

Sound Levels [dB(A)]


Model Cooling Heating
H M L H M L
VM092C7 (USNQ092J2P0), VM122C7 (USNQ122J2P0)
VM121C7 (USNQ121J2P0) , VR092C7 (USNQ092JRP0) 41 36 28 - - -
VR122C7 (USNQ122JRP0) , VM092C6 (USNQ092J3W0)
VM122C6 (USNQ122J3W0) , VM121C6 (USNQ121J3W0)
VM182C7 (USNQ182K2P0) , VR182C7 (USNQ182KRP0) 44 42 37 - - -
VM182C6 (USNQ182K3W0) , VM182C6 (USNQ182K3W2) 45 43 38 - - -
VM242C7 (USNQ242K2P0) , VR242C7 (USNQ242KRP0) 47 42 38 - - -
VM242C6 (USNQ242K3W0) 48 43 38 - - -

75
Inverter Single Wall Mounted - 50/60 Hz (R410A)
12. Sound Levels (Reference Data)

VM092C7 (USNQ092J2P0), VM122C7 (USNQ122J2P0), VM121C7 (USNQ121J2P0),


VR092C7 (USNQ092JRP0), VR122C7 (USNQ122JRP0), VM092C6 (USNQ092J3W0),
VM122C6 (USNQ122J3W0), VM121C6 (USNQ121J3W0)
Cooling 80

‫ غ‬High
‫ ؿ‬Middle
70 ‫ م‬Low
Octave Band Sound Pressure Level (dB re 20μPa )

NC-65
60
NC-60

NC-55
50
NC-50

NC-45
40
NC-40

NC-35
30
NC-30

NC-25
20
Approximate
NC-20
Hearing
Threshold
NC-15
10
63 125 250 500 1000 2000 4000 8000
Octave Band Center Frequency (Hz)

76
Inverter Single Wall Mounted - 50/60 Hz (R410A)
12. Sound Levels (Reference Data)
12.2 Sound Pressure Level (Outdoor Unit)

Unit : m (ft.)
Note
• Sound measured at 1 m (3.3 ft) away from the unit.
• Data is valid at free field condition.
Center of
Outdoor Unit • Data is valid at nominal operation condition.
1 (3.3)
• Reference acoustic pressure 0dB=20μPa.
• Sound level will vary depending on a range of factors such as the
construction(acoustic absorption coefficient) of particular room in
which the equipment is installed.
• The operating conditions are assumed to be standard.
• Sound pressure level is measured on the rated condition in the
anechoic rooms by ISO 3745 standard.
• Sound level is measured in an anechoic room and may be
different according to the test condition or equipment.

Sound Levels [dB(A)]


Model Cooling Heating
H H
VM092C7 (USUQ092J2P0), VM122C7 (USUQ122J2P0)
VM121C7 (USUQ121J2P0), VR092C7 (USUQ092JRP0) 51 -
VR122C7 (USUQ122JRP0), VM092C6 (USUQ092J3W0)
VM122C6 (USUQ122J3W0), VM121C6 (USUQ121J3W0)
VM182C7 (USUQ182K2P0), VR182C7 (USUQ182KRP0) 54 -
VM182C6 (USUQ182K3W0), VM182C6 (USUQ182K3W2)
VM242C7 (USUQ242K2P0), VR242C7 (USUQ242KRP0) 55 -
VM242C6 (USUQ242K3W0) 56 -

77
Inverter Single Wall Mounted - 50/60 Hz (R410A)
12. Sound Levels (Reference Data)

VM092C7 (USUQ092J2P0), VM122C7 (USUQ122J2P0), VM121C7 (USUQ121J2P0),


VR092C7 (USUQ092JRP0), VR122C7 (USUQ122JRP0), VM092C6 (USUQ092J3W0),
VM122C6 (USUQ122J3W0), VM121C6 (USUQ121J3W0)
Cooling 80

‫ ؿ‬Front
‫ م‬Back
70
Octave Band Sound Pressure Level (dB re 20μPa )

NC-65
60
NC-60

NC-55
50
NC-50

NC-45
40
NC-40

NC-35
30
NC-30

NC-25
20
Approximate
NC-20
Hearing
Threshold
NC-15
10
63 125 250 500 1000 2000 4000 8000
Octave Band Center Frequency (Hz)

78
Inverter Single Wall Mounted - 50/60 Hz (R410A)
13. Remote Controller
Wireless Remote Controller

Display
Button Description
Screen

- To turn on/off the air conditioner.


Display
Screen To adjust the desired room temper-
ature in cooling, heating or auto
changeover mode.
To select the cooling mode.
* *
To select the heating mode.

MODE To select the dehumidification mode.


To select the fan mode.
* To select the auto
changeover/auto operation mode.
Button
JET
To change room temperature quickly.
MODE
FAN
To adjust the fan speed.
SPEED
To adjust the air flow direction
vertically or horizontally.

RESET To turn on/off air conditioner


automatically at desired time.

Button
Display
Description SET/ To set/cancel the special functions
-
Screen CANCEL and timer.
To purify the air by removing parti- - To cancel all timer settings at once.
cles that enters the indoor unit.
To reduce noise from outdoor units. - To adjust time.
To keep your skin moisturized by *LIGHT To set the brightness of the
-
generating ion clusters. OFF display on the indoor unit.
To lower indoor humidity quickly. ROOM
To display the room temperature.
TEMP
To maintain a minimum indoor tem-
°C ↔↔ °F °C
To change unit between °C and °F.
perature and prevent indoor objects
[5 s] °F
from freezing.
*ENERGY
To minimize power consumption.
To fan away a mosquito. SAVING
*COMFORT To adjust the air flow to deflect
To remove moisture generated in-
AIR wind.
side the indoor unit.
To set whether or not to display
To make the comfortable sleep en- kW[3 s] -
vironment. information regarding energy.
To Initialize the remote control set- *ENERGY To bring the effect of the power
RESET - CTRL saving.
tings.
*COMFORT To make the comfortable sleep
SLEEP environment.
* buttons may be changed according to the type of DIAGNOSIS To conveniently check mainte-
model. -
[5 s] nance information of a product.

P/No Applied Model


VM092C7, VM122C7, VM182C7, VM242C7, VM121C7, VR092C7, VR122C7, VR182C7,
AKB75215401 VR242C7
AKB74955617 VM092C6, VM122C6, VM182C6, VM242C6, VM121C6

79
Inverter Single Wall Mounted - 50/60 Hz (R410A)
14. Installation
14.1 Important Safety Instructions
The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect
operation of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below.

This symbol is displayed to indicate matters and operations that can cause risk. Read the part with this
! symbol carefully and follow the instructions in order to avoid risk.

! WARNING
This indicates that the failure to follow the instructions can cause serious injury or death.

! CAUTION
This indicates that the failure to follow the instructions can cause the minor injury or damage to the product.

! WARNING
To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this
product, follow basic precautions, including the following :
• The information contained in the manual is intended for use by a qualified service technician who is familiar with
the safety procedures and equipped with the proper tools and test instruments.
• The appliance shall be installed in accordance with national wiring regulations.
• Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified
person in order to avoid a hazard.
• Appliance shall be disconnected from its power source during service and when replacing parts.
• Failure to read and follow all instructions in this manual can result in equipment malfunction, property damage,
personal injury and/or death.
• Check that the appliance’s voltage level is 90 % or higher than the rated voltage. To check it, refer to the label
attached to the side of the appliance.
• Do not install the appliance on an unstable surface or in a place where there is danger of it falling.
• This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of
electric shock by providing a path of least resistance for electric current.
• Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a
qualified electrician or service personnel if you are in doubt as to whether the appliance is properly grounded.
• If the power supply cable is damaged or the cable connection is loose, do not use the power supply cable and
contact an authorized service center.
• Do not connect the ground wire to a gas pipe, a lightning rod, or a telephone ground wire.
• Do not share the power supply for this unit with other with other products or devices, it must be a dedicated
power source for this this appliance.
• Do not modify or extend the power cable.
• Ensure the power cable is secure so that it does not come out while the appliance is operating.
• Do not touch the power cable or the appliance controls with wet hands.
• Cut the power during a severe thunderstorm or lightening or when not in use for a long period of time.
• Do not grab the power cable when removing the plug, but rather hold the power plug tightly.
• Do not bend the power cable excessively or place a heavy object on it.
• Do not turn on the circuit breaker or power when covers are removed or opened.
• Make sure that the pipe and the power cable connecting the indoor and outdoor units are not pulled too tight
when installing the appliance.
• Install dedicated electric outlet and circuit breaker for the appliance.
• Make sure to close the cover of the control box after connecting the wiring to the appliance.
• Loose connections may cause electrical sparks, injury, and death.

80
Inverter Single Wall Mounted - 50/60 Hz (R410A)
14. Installation
• Do not install the appliance in a place where flammable liquids or gases such as gasoline, propane, paint thinner,
etc., are stored.
• Only use the refrigerant designated on the label, do not put any foreign substances into the appliance.
• Keep any required ventilation openings clear of obstruction.
• Use non-flammable gas (nitrogen) to check for leak and to purge air.
• Inert gas (oxygen free nitrogen) should be used when you checking for leaks, cleaning or repairs of pipes etc. If
you are using combustible gases including oxygen, appliance may have the risk of fires and explosions.
• Do not use copper pipes which are deformed. Otherwise, the expansion valve or capillary tube may become
blocked with contaminants.
• When installing or relocating the appliance, consult with a qualified technician to set up the appliance. The
appliance should not be installed by someone without proper qualifications.
• Do not place a heater or other heating appliances near the power cable.
• Operating the appliance while it is disconnected to the pipe could result in explosion and damage. Use the
appliance after connecting it to the pipe once the appliance has been relocated and the refrigerant circuit
repaired.
• Use only refrigerant grade pipe specific for R410A refrigerant. Do not use R22 products, which have lower
pressure ratings and can result in excessive pressure, explosion and injury.

! CAUTION
To reduce the risk of minor injury to persons, malfunction, or damage to the product or property when
using this product, follow basic precautions, including the following :
• Install at places where it can endure the weight and vibration/noise of the outdoor unit.
• Install the appliance in a place where the noise from the outdoor unit or the exhaust air will not inconvenience
the neighbors. Failure to do so may result in conflict with the neighbors.
• Ensure the appliance is installed level. Otherwise, it may cause vibration or water leakage.
• Install the drain hose properly for the smooth drainage of water condensation.
• Do not touch the leaking refrigerant during installation or repair.
• Always check for gas (refrigerant) leakage after installation or repair of appliance.
• Be cautious not to get injured by the sharp edges while installing the appliance or taking it out of its packaging.
• Ensure that you carry by the chassis when you lift the unit.
• This appliance should only be transported by two or more people holding the appliance securely.
• Safely dispose of packing materials such as screws, nails or batteries using proper packaging after installation
or repair.
• To avoid nitrogen entering the refrigerant system in a liquid state, the top of the cylinder must be higher than its
bottom when you pressurize the system.
• Do not use the appliance for special purposes, such as preserving foods, works of art, and etc. It is an appliance
for consumer purposes, not a precision refrigeration system. There is risk of damage or loss of property.

81
Inverter Single Wall Mounted - 50/60 Hz (R410A)
14. Installation
14.2 Product Overview

Parts
1 Installation Plate 6 Drain Hose
2 Air Filter 7 Power Supply Cable
3 Decor 8 Gas Service Valve
4 Gas Pipe (Larger Pipe) 9 Liquid Service Valve
5 Liquid Pipe (Smaller Pipe) 10 (Gas/Liquid) Service Valve Cap

Local Purchases
It is highly recommended that you install the following parts.

A Sleeve
B Sealant
C Clamp

Note
• This feature could be different depending on models.
• If needed, additional pipes, drain hoses, and power cables must be purchased separately.

82
Inverter Single Wall Mounted - 50/60 Hz (R410A)
14. Installation
14.3 Installation Place
Indoor Unit

• Install the indoor unit on a strong and hard wall. Unit: mm (inch)
• Install the indoor unit in a spot with good drainage and good accessibility to the
pipe connected to the outdoor unit.
More than 200 (8)
• Maintain a clearance of at least 100 mm (4 in.) from the right and left sides of More than More than
the indoor unit. 100 (4) 100 (4)
• Maintain a clearance of at least 200 mm (8 in.) between the top of the indoor
unit and the ceiling.
• Maintain a clearance of at least 2 m (6.5 ft.) from the floor for adequate
clearance.
• Do not install the indoor unit near heaters or heating apparatuses.
• Do not install the indoor unit near an obstacle that hinders airflow.
• Do not install the indoor unit near an exit.
• Do not install the indoor unit where it can be exposed to direct sunlight.

Outdoor Unit

• Install the outdoor unit in a location where the floor is firm and even.
• When placing the outdoor unit under an overhang, awning, sunroof or other “roof-like structure”, ensures that
heat radiation from the condenser is not restricted around the unit.
• Do not place the unit where animals and/or plants will be in the path of the warm air, or where the warm air
and/or noise will disturb neighbors.
• Sunroof is recommended for installations that are exposed to direct sunlight and for installations in cold climates
with heavy snow which can accumulate on top of outdoor unit.
• Take the weight of the air conditioner into account and select a place where noise and vibration are minimum.
• Install the outdoor unit somewhere the technician can easily access it for repairs or maintenance.
• Do not install the outdoor unit in a location exposed to saline conditions, such as coastal areas, or sulfuric steam,
such as near a hot spring.
• Do not install the outdoor unit in a location exposed to high winds.
• Observe the below clearance requirements.

Note
• Normal clearances are recommended for service and cleaning access.
• If you do not meet the minimum clearances for installation, the unit does not guarantee the reliability of the unit.
• If the outdoor unit is installed between normal and minimum clearances, capacity can be decreased about 10%.

83
Inverter Single Wall Mounted - 50/60 Hz (R410A)
14. Installation
Outdoor unit service access and allowable clearances
Case 1 Case 2 Case 3
in.)
6 in
.) 9- 11/16
11/1 (1
(19- mm
mm 500ess
0 0
5 e ss G or l
or l
G

A
D
D
B C

C
Case 4 Case 5

F
B
E
B D

Unit : mm A B C D E F G
Normal 300 600 - 300 - - -
Case1
Minimum 100 250 - 100 - - 1000
Normal - - 500 - - - -
Case2
Minimum - - 350 - - - 1000
Normal - - 500 300 - - -
Case3
Minimum - - 350 100 - - -
Normal - - - 300 600 - -
Case4
Minimum - - - 100 200 2000 -
Normal - 600 - 300 - - -
Case5
Minimum - 250 - 100 - - -

Unit : inch A B C D E F G
Normal 11-13/16 23-19/32 - 11-13/16 - - -
Case1
Minimum 3-15/16 9-27/32 - 3-15/16 - - 39-3/8
Normal - - 19-11/16 - - - -
Case2
Minimum - - 13-25/32 - - - 39-3/8
Normal - - 19-11/16 11-13/16 - - -
Case3
Minimum - - 13-25/32 3-15/16 - - -
Normal - - - 11-13/16 23-19/32 - -
Case4
Minimum - - - 3-15/16 7-7/8 78-3/4 -
Normal - 23-19/32 - 11-13/16 - - -
Case5
Minimum - 9-27/32 - 3-15/16 - - -

84
Inverter Single Wall Mounted - 50/60 Hz (R410A)
14. Installation
Precautions about installation in regions with extreme snowfall and cold temperatures
To ensure the outdoor unit operates properly, certain measures are required in locations where there is a
possibility of heavy snowfall or severe wind chill or cold :
• Prepare for severe winter wind chills and heavy snowfall, even in areas of the country where these are unusual
phenomena.
• Position the outdoor unit so that its airflow fans are not buried by direct, heavy snowfall. If snow piles up and
blocks the airflow, the system may malfunction.
• Remove any snow that has accumulated 100 mm (4 in.) or more on the top of the outdoor unit.
• Place the outdoor unit on a raised platform at least 500 mm (20 inches) higher than the average annual snowfall
for the area. If the frame width is wider than the outdoor unit, snow may accumulate.
• Install a snow protection hood.
• To prevent snow and heavy rain from entering the outdoor unit, install the suction and discharge ducts facing
away from direct winds.
• Additionally, the following conditions should be taken into consideration when the unit operates in defrost mode :
If the outdoor unit is installed in a highly humid environment (near an ocean, lake, etc.), ensure that the site is
well ventilated and has a lot of natural light. (Example : Install on a rooftop.)

85
Inverter Single Wall Mounted - 50/60 Hz (R410A)
14. Installation
14.4 Installing the Outdoor Unit
Fixing the Outdoor Unit with Bolt Construction Work
Fix the outdoor unit firmly to prevent it from falling and dropping.
Mechanical anchor bolt
Bolt M10

20 (25/32)

(2-3/8~4-3/32)
60~120
Diagram of lower surface
Tubing connection Unit : mm (inch)

Note
• If you install the outdoor unit on a wall, roof, or rooftop, make sure it's mounted on a suitable frame.
• If the outdoor unit vibrates excessively, secure it using anti-vibration rubber between the unit's feet and the
mounting frame.

Foundation
For good drain of outdoor unit, keep the bottom height from icing upward.

B or
more

A C

Unit : mm Foundation Leg


Model Tool A B C Material Thickness
VM092C7, VM122C7, VM121C7,
VR092C7, VR122C7, VM092C6, UA3 463 100 280 SGCC 1.2
VM122C6, VM121C6
VM182C7, VR182C7, VM182C6 UL2 558 100 370 SAZCC 1.2
VM242C7, VR242C7 U24A 586 100 400 SAZCC 1.2
VM242C6 UE 546 100 370 SAZCC 1.6

Unit : inch Foundation Leg


Model Tool A B C Material Thickness
VM092C7, VM122C7, VM121C7,
VR092C7, VR122C7, VM092C6, UA3 18-7/32 3-15/16 11-1/32 SGCC 1/16
VM122C6, VM121C6
VM182C7, VR182C7, VM182C6 UL2 22 3-15/16 14-19/32 SAZCC 1/16
VM242C7, VR242C7 U24A 23-1/16 3-15/16 15-3/4 SAZCC 1/16
VM242C6 UE 21-1/2 3-15/16 14-19/32 SAZCC 3/32

86
Inverter Single Wall Mounted - 50/60 Hz (R410A)
14. Installation
Connecting the Drain Plug
If you need to install a drain hose onto an outdoor unit, connect the drain hose after inserting the drain plug with
drain washer through the drain hole on the bottom of the outdoor unit.

A : Drain Plug B : Drain Cap C : Drain Washer

Note
• If the hole is not in use, block it with the drain cap.
• The quantity and position of the drain cap could be different depending on models.
• In cold areas, do not use the drain hose on the outdoor unit because the water drained out from the drain hose
can freeze, which may cause malfunctioning by damaging the heat exchanger.

UA3 UL2
B B
A
B
C

U24A UE
B B B
A B

C B

87
Inverter Single Wall Mounted - 50/60 Hz (R410A)
14. Installation
14.5 Checking the Drainage
1. Remove the filter.
• Pull the filter up and out towards you.
• Do not touch the metal part of the appliance when removing the filter.

2. Pour a cup of water into the back of the evaporator.

3. Check the drainage condition.


• Check whether there is any leakage from either the drain hose joint or the
extended hose joint.
• Check the water is flowing out through the drain hose.
• If there is no leakage, but no water is flowing, pour a proper amount of water
again.
4. Insert the filter again.

Example of Correct Drain Hose Installation

88
Inverter Single Wall Mounted - 50/60 Hz (R410A)
14. Installation
Example of Incorrect Drain Hose Installation

Accumulated
Do not raise
drain water
Air Tip of drain hose
dipped in water

Water Water Water


Waving
leakage leakage leakage Ditch

Less than Tip of drain hose No rainwater trap


50 mm gap dipped in bottle

Drain hose inserted less


Risen tip of drain Tip of drain hose and than 50 mm in buried pipe
hose ground are parallel

Buried pipe Less than 50 mm gap

Taping Direction
Horizontal drain hose
more than 2 m

Note
• If the drain hose is not installed properly, water can leak indoors.
– If the drain hose is installed at a higher position than the indoor unit
– If the drain hose is entangled or kinked
– If the end of the drain hose is dipped in water
– If the gap between the end of the drain hose and the bottom is lower than 50 mm

89
Inverter Single Wall Mounted - 50/60 Hz (R410A)
14. Installation
14.6 Check List and Installer Code
Check test item after installation
No. Test Items Check
1 Indoor unit is hooked to the installation plate properly.
2 The gas and liquid service valves are fully opened.
3 There is no refrigerant gas leakage.
4 System is properly grounded. (No electrical leakage)
5 The connection cable is clamped firmly.
6 Indoor unit receives remote control commands and operates properly.
7 Cooling/Heating operation is normal.
8 There is no abnormal sound.
9 There is no water leakage.

How to set the installer code


1 Supply the power to the appliance which is turned off. -
(Method ่) Insert a battery with pressing (A) button. TEMP

A
(Method ้) Press “Reset” with pressing (A) button.
2 SET UP

Reset

Release (A) button. Then, a display of remote controller change to


“00”.
3

You can set a code by pressing the “TEMP” button. 10 digits


Check if buzzer beeps.
4 TEMP

1 digit

Press “ON/OFF” button to set a code to the appliance. ON/OFF

(Method ่) Take out a battery and insert it again.


6 -
(Method ้) Press “Reset” to return to a user mode.
Cut the power to the appliance.
7 -
Turn back on the power to the appliance after 30 seconds.

90
Inverter Single Wall Mounted - 50/60 Hz (R410A)
14. Installation
14.7 Outdoor Unit Cabin
Outdoor cabin louver requirement
1.Outdoor cabin type : Manual door open type
2.Louver angle : Less than 15° on the horizontal base Max15°
3.Louver interval: Over 100 mm (3-15/16 inch) (Recommend) (Recommended)
4.Louver shape : Wing type or plane type
Over 100 mm (3-15/16 inch)
Louver (Recommended)
! CAUTION
• Opening rate and suction should be considered for louvered Section
outdoor room.
• Do not use 'S' type louver. Outside

Note
The problem in case the louver opening rate is small.
• Noise can occur due to the increased velocity of the air passing
Inside
through louver blade.
• Noise can occur due to the louver blade vibrations.
• Drop in outdoor fan performance (Excess static pressure damage Noise can occur due to the
can cause drop in the performance as well as outdoor heat backward flow of the air
exchange efficiency). passing through the louver
• In case the louver opening rate is small or there is insufficient air blade
flow exchange, it might stop the air conditioner.

Opening rate by louver radian

h
ho

< 15°
ho = h * COS
Total face area(A) = H * W
Number of open space (N) = (number of louver - 1)
Effective face area(Af) = ho * W * N
Louver opening rate (n) = Af/A

Af = A * n

Effective face area of cross section [Side view] [Front view]

91
Inverter Single Wall Mounted - 50/60 Hz (R410A)
14. Installation
14.8 Outdoor Unit Max External Static Pressure
Air Flow Rate Static Pressure
Model Tool
CMM CFM N/༇ inWG
VM092C6, VM122C6, VM121C6 UA3 27.0 953 9.5673 0.0384
VM092C7, VM122C7, VM121C7, VR092C7, UA3 27.0 953 7.0760 0.0284
VR122C7
VM182C7, VR182C7, VM182C6 UL2 38.0 1342 10.8796 0.0437
VM242C7, VR242C7 U24A 49.0 1730 9.6388 0.0387
VM242C6 UE 50.0 1766 14.4679 0.0581

92
Air Solution
LG Electronics Inc, 128, Yeoui-daero,
Yeongdeungpo-gu, Seoul, Korea
(07336)
http://partner.lge.com/global

All rights reserved


Printed in Korea November / 2017 The air conditioners manufactured by LG have received ISO9001 certificate for
The specifications, designs, and quality assurance and ISO14001 certificate for environmental management system.
information in this brochure are subject to
change without notice.

You might also like