Professional Documents
Culture Documents
Introduction
In this activity, you will configure the wireless router to:
Use WPA2 Personal as the security method
Rely on MAC filtering to increase security
Support Single Port Forwarding
Instructions
Step 1: Connect to the wireless router
a. From the Desktop tab on PC0, click Web Browser.
b. Type in the IP address of the wireless router 192.168.0.1 and press Enter. You may get a Request
Timeout message while the network converges. Press Enter again.
c. When prompted for credentials, enter the default username and password, admin.
2015 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 2 www.netacad.com
Packet Tracer - Configure Wireless Security
2015 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 2 www.netacad.com