Professional Documents
Culture Documents
Multi Meter Megohm Meter LCR Meter Electrical Tester Voltage Insulation Osciloscope
Tester
Phase Rotation Ground Resistance Clamp Meter Power Quality Micro Ohm Meter Power Quality &
Tester Tester Clamp Meter Harmonics Analyzer
2
electrical tool
multimeter
Specifications Range
Type EX-048 EX-037 EX-158
Averaging/True RMS Averaging True RMS True RMS
Display Counts 4,000 4,000 50,000/500,000
AC/DC Voltage 0.1mV to 600V 0.1mV to 1000V 50,001mV to 1000V
AC/DC Current 0.1μA to 10A 0.1μA to 10A 0,01μA to 20A
Basic Accuracy ±1.5% ±0.5% ±0.02%
Resistance 0.1Ω to 40MΩ 0.1Ω to 40MΩ 0.01Ω to 50MΩ
Capacitance 0.01nF to 100μF 0.01nF to 100μF 0.01nF to 9999μF
Frequency 0.001Hz to 5MHz 0.001Hz to 10MHz 5Hz to 200kHz
Temperature (Type K) -20 to 750°C -20 to 750°C -50 to 1000°C
Duty Cycle - 0.1 to 99.9% 0.1% to 99.99%
Continuity / Diode - Yes Yes
Category Rating CAT III-600V CAT IV-600V CAT IV-600V
Waterproof/ Dropproof - IP67 / 2 m -
3
electrical tool
clamp meter
Most d
Wante
IR Temperature Measurment
Specifications Range
Type EX-045 EX-047 EX-038
Averaging/True RMS Averaging True RMS True RMS
Display Counts 2,000 6,000 4,000
Jaw Size 0.7” 1.5” 1.7”
AC/DC Voltage - 1mV to 600V 0.1mV to 1000V
AC/DC Current 0.1 ot 200A 0.01 to 600A (AC only) 0.1 to 1000A
Basic ACA Accuracy ±3.0% ±2.8% ±2.5%
Resistance - 0.1Ω to 60MΩ 0.1Ω to 40MΩ
Capacitance - 0.01nF to 4mF 0.001nF to 40mF
Frequency 0.01Hz to 1kHz 0.001Hz to 10kHz 1Hz to 4kHz
Temperature (IR) - - -50 to 270°C
Temperature (Type K) - -20 to 760°C -20 to 760°C
Duty Cycle - 0.1 to 99.9% 0.1 to 99.9%
Continuity / Diode - Yes Yes
Category Rating CATIII-300V CAT III-600V CAT IV-600V
4
electrical tool
Complete with test leads with alligator clips, 4 auxiliary earth bars,
hard carrying case, and eight 1.5V AA batteries
5
electrical tool
6
environmental tool
EX-024 EX-022
445815 HYGRO-THERMOMETER HUMIDITY ALERT 445702 HYGRO-THERMOMETER CLOCK
W/DEW POINT Triple display with clock, temperature and humidity
Warning of high or low humidity conditions. With user settable clock alarm.
EX-116 EX-085
RH520A HUMIDITY + TEMPERATURE CHART
445706 HYGRO-THERMOMETER ALARM CLOCK RECORDER
Large digit display clock Best value graphical data logger in the market
Ideal for desktop or wall mount. User friendly, easy to set up and operate.
• Temperature range: -5 to 45°C (1°C) • Simultaneous numerical and graphical display
• Humidity range: 20% to 90% RH (± 5%) • Measures humidity (10 to 95%RH) and temperature
• Calendar displays day, date and month (-28°C to 60°C) plus included LabVIEW™ based
• Audible alarm clock with snooze function software calculates and graphs dew point, wet bulb,
• Measures temperature and humidity plus and GPP (grains per pound)
min./max. function • Internal memory records up to 49,000 data points
• Complete with desktop stand and two AA batteries and can be transferred to a PC via RS-232 serial
• Dimensions 22.1 x 30 x 2.4cm port for further data analysis
• LCD indicates percentage of memory remaining
• Replaceable probe does not require recalibration
• Detachable probe extends up to 1 meter for
measurements in closed environments
• Desk or wall mount
• Complete with built-in stand, detachable probe with
3ft (1m) cable, RS232 cable, RS-232 To USB Adaptor,
LabView-based PC software,100-240VAC 50/60Hz
Display clock and humidity room
adaptor, and three AA batteries
EX-050 MO-25
MO260 COMBINATION PIN/PINLESS MOISTURE MOISTURE PEN
METER. Compact moisture meter for wood and building
materials
• %WME (wood moisture equivalent pin moisture
reading (6 to 94.8% WME) Features:
• Relative pinless moisture reading for non-invasive • Ideal for building restoration applications such as
measurement (0 to 99.9%) detecting water leakages inside walls, ceilings,
• Digital LCD readout with backlighting feature and and floors
tri-color LED bargraph • Use on wall board, sheet rock, cardboard, plater,
• Pinless measurement depth to 0.75” (22mm) concrete, mortar, paper, fabric, and more
below the surface • Five dual color LEDs indicate 10 moisture levels:
• Electro-magnetic sensing technology • Green LEDs 5%, 7%, 9%, 11%, 12%
• Built-in calibration check • Red LEDs 14%, 16%, 20%, 30%, 40%
• Replaceable measurement electrode pins • Easy-to-use one button operation
• Cap protects pins during storage and can be • Data Hold and Auto power off
snapped on to the side of the housing during use • Battery level check on power-up
• Complete with 9V battery, replacement pins,
protective cap, and pouch case
Panel Measurment
Most
Wanted
EX-009 EX-107 EX-126
42509 IR THERMOMETER WITH COLOR 42512 DUAL LASER INFRARED 42570 DUAL LASER INFRARED
ALERT THERMOMETERS THERMOMETER
Programmable high/low alarm Indicates ideal measuring distance. High IR temperature range
With fast two color display and audible Fast 100mS response with highest
alarm. • Dual laser for accurate target accuracy.
• White backlit dual LCD display
• Great for processes that require • Fast 0.15 second response time with • Dual laser targeting indicates ideal
temperature control and monitoring max. display measuring distance when two laser
• Blue backlit dual LCD display changes • Adjustable emissivity increases points converge to 1” target spot
to red backlit when reading exceeds measurement accuracy for different • Lock function for continuous readings
high or low set points surface • White backlit multifunction LCD
• Exclusive 150 millisecond • Adjustable high/low set points with display with bargraph
instantaneous response for capturing audible alarm alerts user when • Fast 100 millisecond response time
MCB Measurment spikes in temperature temperature exceeds the programmed • Max./min./AVG/DIF feature displays
• Max mode captures and holds rapidly set points highest, lowest, average, and max.
changing temperatures • Lock function for continuous readings minus min. values
• Adjustable emissivity increases • Double molded housing • Adjustable high/low set points
measurement accuracy for different • Complete with pouch case and 9V with audible alarm alerts user when
surfaces battery temperature exceeds the programmed
• Complete with case and 9V battery set points
• USB interface includes software
The distance-to-spot ratio (D:S) is the ratio of the distance to the object • Tripod mounting feature
and the diameter of the temperature measurement area. For instance if the • Complete with type K temperature
D:S ratio is 12:1, measurement of an object 12 inches (30 cm) away will
probe, USB cable and software, tripod,
average the temperature over a 1-inch-diameter (25 mm) area. The sensor
may have an adjustable emissivity setting, which can be set to measure carrying case and 9V battery
Wireless Measurment Data Logging the temperature of reflective (shiny) and non-reflective surfaces
Specifications RANGE
Type EX-009 EX-107 EX-126
Range -20 to 510°C -50 to 1000°C -50 to 2200°C
Basic Accuracy ±1% ±1% ±1%
Max. Resolution 0.1°C 0.1°C 0.1°C
Emissivity 0.10 to 1.00 Adjustable 0.10 to 1.00 Adjustable 0.10 to 1.00 Adjustable
Field of View (Distance to Target) 12:1 30:1 50:1
Type K Range - - -50 to 1370°C
Memory - - Manually Store/Recall 100 readings
8
ENVIRONMENTAL TOOL
EX-011 10040773
Most
DT300 LASER DISTANCE METER DT500 LASER DISTANCE METER WITH BLUETOOTH®
Wanted
Laser measurement accurate to 0.06 inches Transmits distance readings to Apple IOS mobile devices
With historical storage that recalls the previous 20 records.
Features:
• Indirect measurement using Pythagorean theorem • Integrated Bluetooth® connects with iOS devices to transmit
• Continuous measurement function with min./max. distance readings for remote viewing
tracking updates every 0.5 seconds • Works with free Apple app to display large easy-to-read
• Addition/subtraction values up to 30ft (10m) away
• Front or rear edge reference • Measures up to 229ft (70m) with a target plate
• Low battery indicator • Automatically calculates Area and Volume
• Double molded housing (IP54) • Indirect measurement using Pythagorean Theorem
• Auto power off • Continuous measurement function with Min/Max distance
• Complete with carrying case and two AAA batteries tracking updates every 5 seconds
• Displays Sum (+) / Difference (-) of multiple readings
• Front or rear edge reference & built-in bubble level
EX-109
DV40 NCV VOLTAGE DETECTOR +
IR THERMOMETER
Built-in IR thermometer.
9
ENVIRONMENTAL TOOL
EX-103 EX-173
EN300 HYGRO-THERMO-ANEMOMETER-LIGHT- AN100 ANEMOMETER CFM/CMM
SOUND METER Large display of airflow or air velocity.
Rugged 5-in-1 environmental meter
Measures humidity, temperature, air velocity, light • Simultaneous display of ambient temperature
and sound. and air flow or air velocity
• Up to 8 easy to set area dimensions (ft² or cm²) are
• Auto-rotating display depending on function stored in the meter’s internal memory
• Built-in low friction vane wheel improves • Super large LCD Backlit Display
accuracy • 3% velocity accuracy via low friction 2.83”D
• Thin-film capacitance humidity sensor for fast (72mm) ball bearing vane wheel on 3.9ft
response (120cm) cable
• Thermistor for ambient temperature • Data Hold and MIN/MAX
measurements • Auto Power off
• Utilizes precision photodiode and correction filter • Complete with vane sensor with 3.9ft (120cm)
• Sound level measurement meets IEC 61672 cable, 9V battery, protective rubber holster, and
class2 carrying case
• Tripod mount
• Complete with six 1.5V AAA batteries
AN100 used in HVAC applications
measuring airflow from from heating
vents
VPC-300 EX-101
VIDEO PARTICLE COUNTER WITH BUILT-IN CAMERA SDL350 HOT WIRE CFM THERMO-ANEMOMETER DATALOGGER
Measure up to 6 channels of particle sizes plus Air Records data on an SD card in Excel® format for easy transfer to a PC
Temperature and Relative Humidity for analysis.
Features: • Air velocity/air flow meter with telescoping probe designed to fit into
• Simultaneously measure and display 6 channels of particle HVAC ducts and other small openings
sizes (down to 0.3 µm), Air Temperature, Humidity, Dew • Datalogger date/time stamps and stores readings on an SD card in
Point and Wet Bulb Excel® format for easy transfer to a PC
• 2.8" TFT Color LCD display • Adjustable data sampling rate: 1 to 3600 sec
• Built-in 320x240 pixel camera takes video (3GP) and photo • Stores 99 readings manually and 20M readings via 2G SD card
images (JPEG) and records them in internal 74MB memory • Record/Recall min., max. readings
• Store 5000 records (date, time, counts, humidity, • Complete with SD card, 3.1ft (95cm) fully extended telescoping probe
temperature, sample volumes, and location label) and 20 with 3.9ft (120cm) cable, and hard carrying case
minutes of video
• Selectable sample time, count data, and programmable
delay
Specifications RANGE
• Max, Min, DIF, AVG record, Date/time setup controls, Auto Air Velocity
Power Off m/s 0.2 to 25m/s
• Mini-USB port connection ft/min 40 to 3940ft/min
km/h 0.7 to 72km/h
MPH 0.5 to 45MPH
knots 1 to 31knots
CFM (feet3/min) 0 to 1,907,000 CFM
CMM (meter3/min) 0 to 54,000 CMM
Temperature 32 to 122°F (0 to 50°C)
Type K Temperature -148 to 2372°F (-100 to 1300°C)
Type J Temperature -148 to 2192°F (-100 to 1200°C)
Memory 20 Million data records (2G SD card)
10
ENVIRONMENTAL TOOL
EX-08
45170 4-in-1 ENVIRONMENTAL METER
Specifications range
• Auto-rotating display Low: 35 to 100dB
Range
• Low friction vane wheel Type K input High: 65 to 130dB
• Capacitance humidity sensor Basic Accuracy ±1.5dB
• Type K input (Probe sold separately)
Weighting (A & C) Yes
• Utilizes precision photodiode and correction filter
• MAX/MIN and Data hold Response Time (Fast/Slow) Yes
• Complete with wrist strap and 9V battery Datalogging No
PC Interface No
EX-074
HD600 DATA LOGGING SOUND LEVEL METER
Meets ANSI and IEC61672-1 Type 2 standards.
EX-234
SL355 Personal Noise Dosimeter • Datalogs up to 12.000 readings when used as a sound level meter with sampling times
Low cost, lightweight and easy to use between 1sec and 1hr
For measuring total sound exposure over an 8-hour • In sound level mode, meter displays sound level, time-average sound level (Leq),
period peak, and sound exposure level (SEL)
• Perform OSHA and IEC Noise accumulation surveys • Optional 94/114dB calibrator to perform “before” and “after” calibration checks per
• One user-defined measurement setup ANSI standards
• Adjustable Criterion Level, Exchange Rate and • Stores up to 20 dosimeter surveys. Data includes Start/Stop Time, %Dose, %Dose
Personal Noise Threshold projected for an 8 hour period and peak level when used in the Dosimeter mode
Measurement • Applications include personal accumulated • USB interface with Windows XP/Vista/7 compatible software to control setup and
noise exposure measurement, Workplace noise retrieve stored events or analyze real time measurments
assessment, OSHA and other regulatory agency • Includes belt clip, clip-on 0.5” microphone with 2.6ft (0.8m) cable, 3 AAA batteries,
compliances mini screwdriver, software, USB cable and carrying case
• Measures frequency weighted noise exposure and
peak sound level simultaneously
11
ENVIRONMENTAL TOOL
EX-088 EX-119
461880 VIBRATION METER + LASER COMBINATION SDL800 VIBRATION METER/DATALOGGER
TACHOMETER Saves data on an SD card in Excel® format for
Multifunctional meter easy transfer to a PC for analysis.
Measures acceleration, velocity and displacement
plus RPM and linear surface speed. • Remote vibration sensor with magnetic adapter
on 47.2”(1.2m) cable
• Unique large LCD with characters on display • Wide frequency range of 10Hz to 1kHz
reverse direction • RMS, peak value or max. hold measurement
• Windows® 95/98/NT/2000/XP compatible modes
software (included) allows captured readings to • Adjustable data sampling rate: 1 to 3600
be downloaded to your PC for further analysis seconds
• Complete with remote vibration sensor, • Offset adjustment used for zero function to
magnetic mount, wheels for linear surface make relative measurements
speed or RPM (cone tip and flat tip), reflective • Stores 99 readings manually and 20M readings
tape, 4 AA batteries, software with cable, and via 2G SD card
hard carrying case • Complete with remote sensor, magnetic mount,
6 x AA batteries, SD card, and hard carrying case
Vibration Meter Features:
• Remote vibration sensor with magnetic adapter
on 39”(1m) cable
• Wide frequency range of 10Hz to 1kHz
• RMS or peak value measurement modes
• Manual/auto store/recall up to 1000 readings
Tachometer Features:
• Uses a laser for greater distance non-contact
measurements up to 4.9ft (1.5m) Test vibration levels on motors, bearing,
with tachometer • Stores last, max., and min. readings
RPM measurement fans, pumps, rotating machinery and more.
EX-054
RPM10 COMBINATION TACHOMETER EX-026
+ IR THERMOMETER 461920 MINI LASER PHOTO TACHOMETER COUNTER
Photo/contact tachometer includes a non-contact Laser light source
IR thermometer. Used for greater accuracy and longer measuring
distances.
• Built-in IR thermometer with laser measures remote
surface temperature on motors and rotating parts • Make non-contact RPM measurements of
• Fixed 0.95 emissivity, 6:1 distance to target ratio rotating objects
• Non-contact photo tachometer uses a laser for • Use reflective tape on object to be measured
greater measuring distance up to 6.5ft (2m) and point the integral laser
• Contact tachometer for RPM and surface speed • Counter function count s up to 99,999
measurements revolutions
• Memory stores min./max./last • Rugged double molded housing for better grip
• Complete with tips/wheel, four 1.5V AA batteries, • Complete with 9V battery and reflective tape
reflective tape, and carrying case
Specifications range
RPM Range Photo: 10 to 99,999
Specifications range
Contact: 0.5 to 20,000 RPM Range 2 to 99,999rpm
m/min 0.05 to 1999.9 (Contact) m/min -
Count Range 1 to 99,999rev Count Range 1 to 99,999rev
Target Distance 2000mm Target Distance 500mm
Basic Accuracy ±0.05% Basic Accuracy ±0.05%
Resolution 0.1rpm Resolution 0.1rpm, 1rev
Memory - Memory Min/Max/Last
Temperature (IR) -20 to 315°C Temperature (IR) -
12
ENVIRONMENTAL TOOL
EX-084
HDV640 VIDEO BORESCOPE/WIRELESS INSPECTION CAMERA
High definition articulating VideoScope EasyView™ Light Meters
6mm diameter camera with 320° articulating tip for best viewing angle
Easy one-hand operation of the articulating camera tip facilitates viewing
in obstructed areas where standard camera tips cannot access. Images and
videos are viewed on the large high resolution color display and can be
stored in SD memory card (included).
Specifications range
Camera
Articulating 320° w/Light Wired & Wireless Controller
Minimum Focus Distance 2.36" (60mm); macro: 0.59” (15mm)
Field of View 65°
Shaft Diameter 0.24” (6mm)
Working Length 39” (1m)
Camera Tip Bending 320° (160° left, 160° right)
Borescope
LCD Screen Type 5.7” color TFT
Pixels 640 x 480 (High Definition)
SD Card 1GB (included)
Operating 4 hours
Sound record Water & Drop Proof
EX-005
BR250 VIDEO BORESCOPE/WIRELESS INSPECTION CAMERA
9mm camera diameter and 3.5” Color TFT LCD wireless
monitor with optional wireless USB video receiver (BRD10) to
stream live video to your PC and over your VOIP (Voice Over
Internet Protocol) connection.
Specifications Range
Camera
Pixels 712 x 486 (NTSC)
Transmission Frequency 2.4GHz
Transmission Range 32ft (10m) unobstructed view
Viewing Direction Viewing Angle 45°
Focus Distance from Object 5.9” to 9.8” (15 to 25cm)
Shaft Diameter 9mm Detacheable wireless 3.5" Ideal Applications:
Working Length 36” (0.9m) color TFT LCD display can • Water Restoration
be viewed from a remote • HVAC and Refrigeration
Minimum Bend Radius 2.36” (60mm) location up to 32ft (10m) • Electrical inspection
Handle Dimensions 7.3x5.7x1.6” (186x145x41mm) from the measurement point. • Automotive
• Pest Control
13
ENVIRONMENTAL TOOL
EX-213 CG-304
CG-204 Coating Thickness Tester COATING THICKNESS TESTER WITH BLUETOOTH®
Dual Technology provides automatic recognition Measures the thickness of ferrous and non-ferrous substrates
For ferrous and non-ferrous substrates
Features:
• Automatic substrate recognition • Dual technology provides automatic recognition of ferrous
• Magnetic induction for ferrous substrates and non-ferrous substrates
• Eddy current measurment for non-ferrous substrates • Magnetic induction for ferrous substrates
• Easy to use menu system • Eddy-current measurement for non-ferrous subtrates
• Two measuring modes: Single and Continuous • Easy-to-use menu system
• Two working modes: Direct and Group • Dot matrix LCD display with backlight and contrast
• Memory stores 400 readings: 80 Direct and 320 • Memory stores 2500 readings in 50 groups with 50 readings
Group in each group
• User-programmable high/low alarms • Zero-point calibration function
• Min/Max/Average
ex-051
RF41 BATTERY COOLANT REFRACTOMETER
-50 TO 0˚C
Measure the concentration of sugar, salt, lubricants,
antifreeze, cutting fluids & more RF-41
Available with or without automatic temperature scale view
compensation. through eyepiece
• Easy to operate refractometers provide accurate and
repeatable measurements on easy to read scales Specifications Resolution Accuracy
• Automatic temperature compensation models available -50 to 0°C Propylene Glycol 1°C ±2%
for sugar, salt, lubricants, cutting fluids, and antifreeze freeze point
• Requires only 2 or 3 drops of solution -50 to 0°C Ethylene Glycol freeze 1°C ±2%
• Complete with case, calibration screwdriver, and point
calibration solution complete with six AA batteries 1.15 to 1.30 Specific Gravity of 0.01 -
and calibration cable with spade lug terminals Battery Acid
14
water quality tester
EX-012 EX-131
PH100 WATERPROOF EXSTIK® PH METER PH300 WATERPROOF PH/MV/TEMPERATURE KIT
Flat surface electrode design 3-in-1 meter with lab-quality performance.
Flat surface electrode measures pH in liquids, semi-
solids, and solids. • Waterproof housing (meets IP57)
• Automatic calibration (4, 7, and 10pH)
• RENEW indicator tells you when it’s time to replace • Choice of 3 point calibration for better accuracy
your electrode • Automatic temperature compensation
• CAL alert tells you it’s time to recalibrate • Memory stores up to 200 readings with series
• Memory records and recalls 15 data number, measured value and temperature
• Analog bargraph displayed on LCD • Complete with pH/mV/temperature electrode,
• 1, 2 or 3 point calibration protective rubber holster, pH calibration
• Waterproof design (IP57) floats in water solutions (4, 7, and 10pH), 2 AA batteries, and
• Complete with flat surface pH electrode, sensor cap, hard carrying case
sample cup with cap, and 48” (1.2m) neckstrap
Most d
Wante
EX-035 EX-030
EC500 waterproof ExStik® II pH/conductivity meter DO600 WATERPROOF EXSTIK® II DISSOLVED OXYGEN
Combination rugged Flat Surface pH electrode METER/KIT
Measures conductivity, TDS, Salinity, pH, and Easy to replace screw on membrane cap For fast
temperature using one electrode. replacement and operation. Extension cable and
weighted probe guard included with the Kit.
• Analog bargraph indicates trends
• Memory stores up to 25 labeled readings • Oxygen level displayed as % Saturation or
• Adjustable conductivity to TDS ratio from 0.4 to 1.0 Concentration
• Waterproof to IP57 • Adjustable Altitude Compensation (0-20,000ft in
• EC500 meter includes electrode, sensor cap, sample 1,000ft increments)
cup with cap, and 48” neckstrap. • Adjustable Salinity Compensation from 0 to 50ppt
• Analog bargraph indicates trends
• Memory stores up to 25 data sets
• Self calibration on power up
• Waterproof to IP57
• DO600 meter includes DO electrode, sensor cap, spare
membrane cap, electrolyte, and 48” (1.2m) neckstrap
1 2
WQ-500
BENCHTOP WATER QUALITY METER/STIRRER
Magnetic stirrer with pH. mV, and temperature measurements
Features:
• Built-in stirrer with 30, 60, and 120 minute timer or
continously operation
• Large backlit dual LCD simultaneously displays
measurement and temperature
• 2 or 3 point pH calibration for better accuracy 3 4
(4, 7, and 10 pH)
• Automatic temperature compensation
• Memory stores up to 150 readings
Specifications Range
Type EX-012 EX-131 EX-035 EX-030
pH 0.00 to 14.00pH -2 to 19pH 0.00 to 14.00pH -
Conductivity - - 0 to 199.9μS, 200 to 1999μS, 2 to 19.99mS -
TDS/Salinity - - 0 to 99.9ppm, 100 to 999ppm, 1 to 9.99ppt -
mV - -1999mV to 1999mV - -
DO Saturation/Concentration - - - 0 to 200% / 0 to 20 ppm
Temperature -5 to 90°C 0 to 100°C -5 to 90°C 0 to 50°C
Max Resolution 0.01pH, 0.1° 0.01pH, 1mV, 0.1° 0.1μS, 0.1ppm, 0.01pH, 0.1°C 0.1%, 0.01ppm, 0.1°C
Basic Accuracy ±0.01pH, ±1°C ±2%FS, ±0.01pH, ±1°C ±2%FS, ±0.01pH, ±1°C ±2%FS, 0.4ppm, ±1°C
15
KIT SERIES
MO280-RK 10022263
Restoration Contractor’s Kit TK430-IR Industrial Troubleshooting Kit with IR
A complete solution for the Restoration Contractor complete True RMS MultiMeter & Clamp meter &
IR Thermometer kit
Features:
• MO280 - Pinless Moisture Meter Features:
- Displays %moisture from 0 to 99% • Ideal for electrical testing needs including
- Measurement depth to 0.75" (22mm) below installation and repair of electrical systems,
the surface HVAC equipment and large appliances
• MO220 - Wood Moisture Meter • Includes EX430: True RMS, autoranging
- Memory contains 8 wood groups with multimeter with 11 functions
calibrations for approximately 170 species of • Includes MA200: 400A Clamp meter with basic
wood AC Current and 1mA resolution
- Measures wood moisture from 6 to 99.9% • Includes 42510: InfraRed Thermometer (-58 to
• RH490 - Precision Hygro-Thermometer 1000°F/-50 to 538°C) with laser pointer
- Measures Temperature, Humidity, Dew Point, • Includes 40130: Non-contact voltage detector
Wet Bulb, Absolute Humidity, GPP (from 100V to 600V AC)
- Less than 30 second RH response time with • Includes set of test leads and Type K bead wire
2%RH accuracy Tapered jaw fits into tight spaces temperature probe
• RHT10 - Humidity/Temperature USB Datalogger • Supplied in a heavy duty hard carrying case that
- Datalogs 16,000 RH and 16,000 Temperature provides protection and organization for meters
readings and accessories
- User-programmable sampling rate and alarm
thresholds
• Kit is supplied in a rugged heavy duty hard
carrying case that provides protection and
organization for the meters and accessories
whenever they are needed
Electrical Troubleshooting for hot spot detection