Professional Documents
Culture Documents
Revision: 01.01.2019 (Valid for 3 years from the lasts version) Version No: 6
Revision: 01.01.2019 (Valid for 3 years from the lasts version) Version No: 6
Additives - - < 1%
Revision: 01.01.2019 (Valid for 3 years from the lasts version) Version No: 6
Revision: 01.01.2019 (Valid for 3 years from the lasts version) Version No: 6
Revision: 01.01.2019 (Valid for 3 years from the lasts version) Version No: 6
• Protective Measures:
Put on appropriate personal protective equipment (see Section 8). Avoid contacting molten material
with eyes, skin and clothing. Avoid breathing dust and process fumes. Ensure good ventilation at the
workplace. Prevent dust accumulation. Pneumatic conveying of powder and pellets and other
mechanical handling operations can generate large static electrical charges. Dust can be ignited by
static electrical discharge. To avoid fire or explosion, dissipate static electricity during transfer by
grounding and bonding containers and equipment before transferring material. Worker should handle
the container with appropriate apparatus such as forklift and handlift. If worker feel stiff, should take a
rest sufficiently.
• Advice on general occupational hygiene:
Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and
processed.
Always wash hands after handling the product.
Revision: 01.01.2019 (Valid for 3 years from the lasts version) Version No: 6
Revision: 01.01.2019 (Valid for 3 years from the lasts version) Version No: 6
Revision: 01.01.2019 (Valid for 3 years from the lasts version) Version No: 6
Revision: 01.01.2019 (Valid for 3 years from the lasts version) Version No: 6
10.1 Reactivity:
No dangerous reaction known under conditions of normal use.
10.2 Chemical stability:
The product is stable at normal handling and storage conditions.
10.3 Possibility of hazardous reactions:
Polymerization will not occur. Dust may form explosive mixture in air.
10.4 Conditions to avoid:
Avoid prolonged storage at elevated temperature. Exposure to elevated temperatures can cause product
to decompose (Temperature should less than 300°C). See Technical Datasheet for suitable processing
condition.
Avoid dust formation.
Avoid the build-up of electrostatic charge.
10.5 Incompatible materials:
Avoid contact with strong oxidizing agents.
10.6 Hazardous decomposition products:
Burning can produce carbon monoxide and/or carbon dioxide and other harmful products. The
decomposition products are low molecular weight oligomers, hydrocarbons and hydrocarbon oxidation
product (aldehydes, alcohols, organic acids) depending on temperature and air availability.
Revision: 01.01.2019 (Valid for 3 years from the lasts version) Version No: 6
• Sensitization to the respiratory tract: No effects are expected for ingestion of small amounts.
May cause choking if swallowed.
• Skin sensitization: No relevant data found.
• Germ cell mutagenicity: No relevant data found.
• Carcinogenicity: No relevant data found.
• Reproductive toxicity: No relevant data found.
• Additional toxicological information: When used and handled according to specifications, the
product does not have any harmful effects to our
experience and the information provided to us.
12.1 Toxicity:
• Aquatic toxicity: Not expected to be acutely toxic, but material in pellet
form may mechanically cause adverse effects if ingested
by waterfowl or aquatic life.
12.2 Persistence and degradability: Not easily biodegradable
12.3 Bioaccumulative potential: This material is not expected to bioaccumulation because
of the relatively high molecular weight (MW greater than
1000).
12.4 Mobility in soil: This material is expected to remain in the soil and float on
the water surface
12.5 Results of PBT and vPvB assessment:
• PBT: Not determined
• vPvB: Not determined
12.6 Other adverse effects: Avoid release to the environment.
Revision: 01.01.2019 (Valid for 3 years from the lasts version) Version No: 6
• Waste disposal: Do not dump into any sewers, on the ground, or into any
body of water. All disposal practices must be in compliance
with official or local regulations. Regulations may vary in
different locations. Waste characterizations and
compliance with applicable regulations are the
responsibility solely of the waste generator.
• Packaging disposal: Do not reuse container. Disposal must be in compliance
with official or local regulations. The packaging only use
for industrial purpose.
• Waste treatment option: Recycle if possible
• Other disposal recommendations: Disposal must be made according to official or local
regulations.
14.1 UN-Number:
• ADR, IMDG, IATA Not regulated
14.2 UN proper shipping name:
• ADR, IMDG, IATA Not regulated
14.3 Transport hazard class(es):
• ADR, IMDG, IATA
• Class Not regulated
14.4 Packing group:
• ADR, IMDG, IATA Not regulated
14.5 Environmental hazards:
• Marine pollutant: No
14.6 Special precautions for user: Not applicable.
Revision: 01.01.2019 (Valid for 3 years from the lasts version) Version No: 6
Issued by
Thai Polyethylene Co., Ltd (QA & QC Department)
10 I-1 road, Map Ta Phut Industrial Estate, Muang, Rayong 21150 Thailand
Tel: +66 38 683393-7 ext. 2407
Fax: +66 38 683398
Disclaimer:
• It is customer’s responsibilities to inspect and test the product for suitability of the customer’s own use and purpose.
The customer is responsible for appropriate, safe, legal use, processing and handling of the product.
• To the best of our knowledge, the information contained herein is accurate and reliable as of the date of
publication. We however do not assume any liability whatsoever for the accuracy and completeness of the
information contained herein.
• We make no warranties which extend beyond the description herein. Nothing herein shall constitute any implied
warranty of merchantability or fitness for a particular purpose.
• No liability can be accepted in respect of the use of the product in conjunction with other materials. The information
contained herein relates exclusively to the product when it is not used in conjunction with any third party’s materials.
Revision: 01.01.2019 (Valid for 3 years from the lasts version) Version No: 6