Professional Documents
Culture Documents
Jwin DVD Player Jd-Vd503
Jwin DVD Player Jd-Vd503
JD-VD503
SR
Thanks for purchasing the jWIN DVD player. Before operating this player, please read
this manual and retain it for future reference.
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE.
DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
CAUTION:
When replacing the direct plug-in power supply or a separable, cord-connected power supply, the replacement
must be the exact duplicate, or one that has been recommended by the manufacturer.
1
More user manuals on ManualsBase.com
R
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH THE WIDE BLADE OF THE PLUG TO THE WIDE SLOT,
AND FULLY INSERT.
CAUTION:
Use of controls, adjustments or the performance of procedures other than those specified may result in
hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
FCC NOTICE:
This equipment has been tested and proved to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rule. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
WARNING:
Changes or modifications made to this equipment, not expressly approved by jWIN, or parties
authorized by jWIN, could void the user's authority to operate the equipment.
2
More user manuals on ManualsBase.com
R
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard.
The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing.
This unit is fully transistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1.Read these instrucitons 8.Do not install near any heat sources
After unpacking this product, read these such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
instructions carefully, and follow all the that produce heat.
instructions.
5.Do not use this apparatus near water. 10.Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
3
More user manuals on ManualsBase.com
R
4
More user manuals on ManualsBase.com
R
Notes on Cleaning
5
More user manuals on ManualsBase.com
R
Notes on Maintenance
Don't put the appliance in the following places:
* Places exposed to direct sunlight or close to heat
radiating appliances (e.g. heater).
* The top of other heat radiating objects. SR
Notes on servicing
* Don't open the appliance to repair by yourself. If SR
Note: The illustrations in this operation instruction may be different from real objects.
6
More user manuals on ManualsBase.com
R
TABLE OF CONTENTS
7
More user manuals on ManualsBase.com
R
1. OPERATING INTERFACE
FRONT PANEL:
VIDEO
8
More user manuals on ManualsBase.com
R
REMOTE CONTROL:
1.POWER ON/STANDBY button
2.NTSC/PAL button
3.RECALL button
4.NUMBER button
5.STOP button
6.ZOOM button
7.PLAY button
8.PAUSE button
9.UP button
10.LEFT button
11.DOWN button
12.MENU (PBC) button
13.VOLUME control (-)
14.PREV. button
15.NEXT button
16.TITLE button
17. SLOW MOTION button
18. RETURN button
19. SUBTITLE button
20. OPEN/CLOSE button
21. SPECTRUM button
22. PROGRESSIVE button
23. CLEAR button
24. SEARCH button
25. 3D
26. AUDIO button
27. SETUP button
28. RIGHT button
29. ENTER button
30. OSD button
31. VOLUME control (+)
32. FAST FORWARD button
33. FAST REWIND button
34. A-B REPEAT button
35. REPEAT button
36. PROGRAM button
37. ANGL E button
38. MUTE button
9
More user manuals on ManualsBase.com
R
VFD DISPLAY:
When playing discs, VFD will be as follows.
<1> Disc Format Display <4> Playing Display <7> Hour Display
<2> Title Display <5> Repeat Display <8> Minute Display
<3> Chapter/Track Display <6> Pause Display <9> Second Display
10
More user manuals on ManualsBase.com
R
3. REFERENCE GUIDE
VIDEO
11
More user manuals on ManualsBase.com
R
Connect with TV
1. Normal connection
Use the YUV cords to connect the player with the
corresponding ports of the TV set as shown in the
picture on the right .
VIDEO
Connect one end of S-Terminal wire with S-Terminal VIDEO OUT AUDIO OUT AUDIO OUT
12
More user manuals on ManualsBase.com
R
1. Normal Connection
The connection method is illustrated in the picture.
13
More user manuals on ManualsBase.com
R
5. BASIC OPERATION
14
More user manuals on ManualsBase.com
R
NO DISC No disc
SR POWER ON
OFF
OPEN/CLOSE
OPEN
OPEN/CLOSE
15
More user manuals on ManualsBase.com
R
3. Place a disc into the disc tray and then press the " OPEN/
CLOSE " button on the remote control or on the player
to close the disc tray. The player can automatically
discern different kinds of discs, and disc information Type of disc DVD
OPEN/CLOSE
OPEN/CLOSE
Turn Off
Press the "OPEN/CLOSE" button on the remote control
or the player to open the disc tray, take the disc out,
close the disc tray, and then press the STANDBY button
to standby mode, or press the POWER button to turn
off the player completely.
PLAY
16
More user manuals on ManualsBase.com
R
5. STANDBY
STANDBY
STANDBY
17
More user manuals on ManualsBase.com
R
6. RETURN
RETURN
Back
RETURN
Note:
1. This player has the function of automatically
discerning the format, and defaults to the NTSC system.
If playing discs in NTSC format, the player can
automatically switch to NTSC system. At this
time, it is normal that the picture will be instantly
flashed.
2. If the picture is not colorful, the color is abnormal,
or the sound and picture are temporarily interrupted,
(which may be caused by the discrepancy between
the disc format and TV system), at this time, you can
adjust TV system or picture output mode of the whole
disc player by this option to make them compatible.
Directly press NTSC/PAL button on the remote control
to change the system.
N/P
18
More user manuals on ManualsBase.com
R
MUTE
Decrease volume
Increase volume
AUDIO(L/R)
19
More user manuals on ManualsBase.com
R
SUBTITLE 01/03:ENGLISH
20
More user manuals on ManualsBase.com
R
6.2 PAUSE
In play state, press PAUSE for the first time and
the player will be in pause state. Press the button
again, and the player will be in STEP state. Each time
the button is pressed, the picture on the Screen will
move to the next frame. Continuously press the button,
the picture on the screen will keep moving forward.
Pressing "PLAY" will return to normal play mode.
FAST REWIND:
In play mode, press the "FR" button on the remote
control to fast rewind at X2 speed, again to get X4
speed, a third time to get X8 speed, a fourth time to get
X16 speed and a fifth time to get X32 speed. Press "FR"
button for the sixth time, the player return to the normal
play state, or press "PLAY" to return to normal play
mode directly.
21
More user manuals on ManualsBase.com
R
Notes:
1) This function doesn't work with CD, MP3,WMA,
Picture CD discs.
2) DVD disc is compatible with the function of slow
motion.
CHAPTER
6.6 REPEAT
22
More user manuals on ManualsBase.com
R
automatically.
6.7 ZOOM
Successively press ZOOM to get different zoomed
pictures. In state of zoom play, pressing the Direction
buttons " " can shift the pictures
accordingly.
6.8 RETURN
When playing a DVD disc, press RETURN to return
to the main menu.
When playing VCD, SVCD, pressing the RETURN button
in PBC On state can return to the menu.
6.9 MENU
For DVD disc, press MENU to play the desired
tracks (depending on the discs being played). For
SVCD and VCD 2.0 discs, press this button and the
player will switch between the two play modes of
PBC ON and PBC OFF.
* This function doesn't work with VCD1.1 and CD
discs.
23
More user manuals on ManualsBase.com
R
6.12 ANGLE
Press ANGLE to watch the same scene from different
angles when enjoying sports, musical or drama programs.
3D
SPECTRUM
24
More user manuals on ManualsBase.com
R
in turn: play time, remaining time of the title, chapter TT 01/07 CH 02/08 1:21:43
SINGLE REMAIN
TRACK01/09 01:43
OSD
SINGLE ELAPSED
TRACK01/09 01:43
6.16 CLEAR
When you input the numbers, you can press the "CLEAR"
button to cancel the numbers entered.
6.17 STANDBY
Press STANDBY, the unit will enter into status of STANDBY
standby. DVD display is not light, video has no output,
power consumption of the unit is largely reduced;
press it again to return to normal working state.
25
More user manuals on ManualsBase.com
R
Basic Operation
* Press the " SETUP " button on the remote control to
enter the main page of the SETUP menu. And the
TV screen displays as shown in the picture on the
right:
* Press the arrow keys " ", " ", " ", " " to
SETUP MENU--MAIN PAGE
select or adjust, and press " ENTER " to confirm. GENERAL SETUP
AUDIO SETUP
* Select " EXIT THE SETUP MENU " , or press the VIDEO SETUP
"SETUP" button again to exit from the setup interface. PASSWORD SETUP
PREFERENCE SETUP
EXIT SETUP
7.1.1 TV type
--GENERAL SETUP PAGE--
Select this item to select the output system of the player TV TYPE
so that it can accord with the system of the TV set. TV DISPLAY
OSD LANG
NORMAL/PS
NORMAL/LB
SCREEN SAVER
[PAL] MENU STYLE
WIDE
7.1.2 TV display
Through this item, users can conduct setups of " normal/
panoramic scene, normal/ letter box, wide screen"
according to the screen of the disc and TV set so as to
gain the best video effect.
7.1.4 Screensaver
Selecting "ON" can start up the screensaver function.
Selecting "OFF" can turn off the screensaver function.
For details, see "13. Intelligent screensaver and
standby function".
26
More user manuals on ManualsBase.com
R
MAIN PAGE
BACK
7.2.1.5 Subwoofer
If set as ON, the subwoofer has signal output. If set as
OFF, then the subwoofer has no signal output.
27
More user manuals on ManualsBase.com
R
7.2.1.6 Dialogue
--SPEAKER SETUP PAGE--
It is used for enhancing the definition of dialogue. DOWNMIX
FRONT SPEAKER STEREO
When the audio channel mode is 5.1 CH, it doesn't CNTR SPEAKER 5.1CH
REAR SPEAKER
have such a function. SUB WOOFER
DIALOG
BACK
7.2.1.7 Back
Select this item to return to the higher menu.
7.2.2.3 Back
Select this item to return to the higher menu.
28
More user manuals on ManualsBase.com
R
7.2.3.2 Back
Selecting this item to return to the higher menu.
7.2.4.5 Back
Select "Back" to return to the AUDIO SETUP page.
7.2.5 3D Processing
Select this item, there will be 8 choices for sound
output: OFF, ROCK, POP, LIVE, DANCE, TECHNO,
CLASSIC, SOFT.
29
More user manuals on ManualsBase.com
R
MAIN PAGE
7.3.2.3 Back
Select "Back" to return to the VIDEO SETUP page.
30
More user manuals on ManualsBase.com
R
7.5.4 Default
If selecting "RECALL" in this setup, each set
function item will be reverted to the initial state
when the player was delivered from the factory.
31
More user manuals on ManualsBase.com
R
Notes:
1. If the number of inputted track is more than that
of the total tracks on the disc, the player will
automatically clear the inputted track number.
2. For DVD disc with only one title, the programming
method is the same as that of SVCD and VCD disc.
32
More user manuals on ManualsBase.com
R
PICTURE 1
Note: The inputted title number can't be more than
that of the total titles on the disc, and the inputted
chapter number can't be more than that of the total
TITLE /05 CHAPTER 00/00
chapters of the current title, or the operation will
be invalid.
SEARCH
PICTURE 2
33
More user manuals on ManualsBase.com
R
ENTER
34
More user manuals on ManualsBase.com
R
35
More user manuals on ManualsBase.com
R
Noise handling:
1. Take the microphone far away from the TV set
or SPEAKER.
2. Turn down the volume of TV set or SPEAKER.
3. Turn down the volume or echo of microphone.
MENU
part of the menu, then press " " or " " to select
tracks, and press " PLAY " to start play.
Play Mode FOLDER
Note :
1. The player does not support display of track and
directory in Chinese. If the track or directory is
PICTURE 2
in Chinese, the player will display it with " - " .
2. Track No. means the track No. of current directory.
36
More user manuals on ManualsBase.com
R
37
More user manuals on ManualsBase.com
R
Notes:
1) The player has two kinds of play methods: normal
mode and document mode. In stop state, pressing the
PROG button can switch the play methods between
normal mode and document mode.
Document mode: All the documents in the disc will
be displayed for your selection.
Normal mode: The documents in the disc will be
displayed via directory structure.
38
More user manuals on ManualsBase.com
R
PICTURE 3
39
More user manuals on ManualsBase.com
R
12.3 PAUSE
Press " PAUSE " to stop in the current picture.
Press " PLAY " to resume play.
ZOOM100%
12.5 ZOOM
Press "ZOOM", the screen will enlarge by 100%, then ZOOM125%
ZOOM
press "FAST FORWARD" and "FAST REWIND" keys
to enlarge or reduce the picture by different times.
ZOOM50%
12.7 Press arrow keys " " and " ", the picture
display is up-down mirror image and left-right mirror
image respectively.
40
More user manuals on ManualsBase.com
R
With the same function of screensaver and stand-by function as computer, it will automatically enter
into screensaver after three minutes under stop or no disc state, so as to protect your TV screen. It will
automatically enter into stand-by state after twenty minutes of screensaver, then DVD display is not
light, video has no output, power consumption of the appliance is largely reduced, so as to enhance the
safety and prolong lifespan. In stand-by state, press " PLAY " or " OPEN/CLOSE " on the front panel
of DVD to go normal working states.
Before requesting after-sale warranty service, try the Remote control does not work:
following troubleshooting suggestions.. * Remove the obstacles between the player and
the remote control.
* Point the remote control at the sensor on the
No sound:
front panel of the player.
* Ensure that the player is properly connected * Check whether the energy of the battery is
with other systems, such as power amplifier or adequate.
TV set.
* Ensure that TV set or power amplifier is working
No display or partial display:
properly.
* Check if MUTE button of the appliance or TV * Check whether the disc is scratched and ensure
set is pressed. that the disc is clean.
* Check whether volume of the TV set or player * When there is trouble, please turn off the
is adjusted to minimum. power because the appliance is controlled by
microcomputer, and turn on the player again
after several seconds. If the trouble is resolved,
No picture: the player may work properly again.
* Ensure that the player is connected firmly with
the other system, such as TV set. No output after turning on the player:
* Ensure that the TV set is working properly. * Ensure that the time interval between turning off
* Ensure that the video output mode is set properly and turning-on is not too short.
(Refer to 4.3). * Turn off the disc player, and turn on again after
10 seconds.
* Ensure that the video output mode is properly
Disc not playing
set. (Refer to 4.3 for details)
* Ensure that the disc is placed correctly. (The
label side is facing up.)
* Ensure that the disc is clean. Screen is not light and no output
* The appliance may enter the stand-by state.
Press the "PLAY" or "OPEN/CLOSE" button
Microphone has no sound: on the panel to activate it.
* Adjust the volume of the microphone to proper * Switch off the power supply of the appliance,
level. and turn it on after 10 seconds.
41
More user manuals on ManualsBase.com
R
DVD player is the ticket of your home theatre. Every technical index of this appliance is far superior to any
previous video player. This completely new digital technology has compressed the audio - visual effect of
cinema into a 12cm-diameter disc which is the same in dimension as the CD disc. It is also compatible with
the existing SVCD, VCD and CD.
Single-side
Playing time 133 242 266 484 60minutes
45minutes 74minutes 74minutes
minutes minutes minutes minutes double-side
120minutes
Horizontal 500 lines or more No more than no more than no more than
resolution 430 line 350 line 250 line
Picture
Multiple kinds one kind one kind one kind
proportion
16 kinds
Subtitle 32 kinds 4 kinds
at most
42
More user manuals on ManualsBase.com
R
MULTIPLE LANGUAGES
DVD discs can support 8 kinds of language sounds and 32 kinds of language subtitles.
43
More user manuals on ManualsBase.com
R
Sort of language
Subtitle languages
Picture proportion
Parental lock
DISC PROTECTION :
44
More user manuals on ManualsBase.com
R
45
More user manuals on ManualsBase.com
R
Audio output
(digital audio) Electric level output : 0.5Vp--p
Output Video output Electric level output :1Vp--p resistance : 75 Unbalanced negative
YUV(Y, Cb,
Electric level output : Y/Cb/Cr 700 140mVp--p
Cr) output
Input Microphone X 2
Power AC 120V/60Hz
Weight 3.4 Kg
46
More user manuals on ManualsBase.com
R
Dolby:
* Produce under the authorization of Dolby laboratory. The symbol of Dolby and
double D are trademarks of Dolby laboratory. It is a secret product and cannot be
issued. C Dolby laboratory: 1992-1997. All rights reserved.
Macrovision:
This product incorporates copyright protection technology that is protected
by method claims of certain U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disasssembly
is prohibited.
47