Professional Documents
Culture Documents
aspx
Not Answered
C Ratio of sum of maximum and minimum speed to the difference between maximum and minimum speed
D Ratio of the difference between maximum and minimum speed to the sum of maximum and minimum speed
C Ingot
D Slab
qp.hppsc.hp.gov.in/ViewCandResponse.aspx 1/16
02/03/2021 qp.hppsc.hp.gov.in/ViewCandResponse.aspx
B Axial flow
C Centrifugal
D Reciprocating
B Die forging
C Piercing
D Rolling
Q.No: 8 The moment of the force about a point is equal to the algebraic sum of the component forces about the same point is known as
A Law of Parallelogram
B Varignon’s theorem
C Law of triangle
D Tresca theory
Not Answered
C AC welding
D Oxy-acetylene welding
qp.hppsc.hp.gov.in/ViewCandResponse.aspx 2/16
02/03/2021 qp.hppsc.hp.gov.in/ViewCandResponse.aspx
Q.No: 16 Two forces P and Q are acting at an angle The resultant force R acts at an angle of θ with force P, then the value of θ will be
Not Answered
Q.No: 17 The circle passing through the top of the teeth of a gear is known as
A Pitch circle
B Dedendum circle
C Base circle
D Addendum circle
Q.No: 18 If the angle of wrap in belt drive is θ and the coefficient of friction between belt and pulley is µ. (Where are the tensions in the tight
of the belt respectively.)
Which one is true
qp.hppsc.hp.gov.in/ViewCandResponse.aspx 3/16
02/03/2021 qp.hppsc.hp.gov.in/ViewCandResponse.aspx
C Energy
D Internal energy
C Grinding machine
D Milling machine
Q.No: 24 If the helix and friction angles in a screw jack are given as and respectively, the value of coefficient of friction, µ will be
qp.hppsc.hp.gov.in/ViewCandResponse.aspx 4/16
02/03/2021 qp.hppsc.hp.gov.in/ViewCandResponse.aspx
Q.No: 25 For the medium head of the water (24 – 180 m), which hydraulic turbine is best suited
A Pelton turbine
B Francis turbine
C Kaplan Turbine
D Any one
Q.No: 26 Decreasing the clay content in the moulding sand increases the
A Flowability
B Permeability
C Refractoriness
D Green strength
B Diamond
C Steel
D Aluminium
Q.No: 29 The total heat radiation from a black body per second per unit area is proportional to
(Where T is an absolute temperature.)
qp.hppsc.hp.gov.in/ViewCandResponse.aspx 5/16
02/03/2021 qp.hppsc.hp.gov.in/ViewCandResponse.aspx
Not Answered
D Charle’s law
Q.No: 35 Three forces P, Q, and R are acting concurrently. The included angles are α, β, and ϒ. According to Lami’s theorem
qp.hppsc.hp.gov.in/ViewCandResponse.aspx 6/16
02/03/2021 qp.hppsc.hp.gov.in/ViewCandResponse.aspx
D Tool reciprocates and feed is given to job
Q.No: 39 To maximize the efficiency, the speed ratio in Parson’s reaction turbine is
B 10 to 14
C 14 to 22
D 22 to 32
A 45o to 60o
B 30o to 45o
C 60o to 90o
D 15o to 30o
C Wire Drawing
D Deep drawing
C 0.33 to 0.5
D 0.8 to 1.2
B Quality planning
C Material handling
D Inventory management
qp.hppsc.hp.gov.in/ViewCandResponse.aspx 7/16
02/03/2021 qp.hppsc.hp.gov.in/ViewCandResponse.aspx
C Thermoforming
D Injection moulding
Q.No: 46 The ratio of aluminium and iron oxide used in thermit welding is
A 1:3
B 3:1
C 1:2
D 2:1
Q.No: 47 If a Carnot cycle has a coefficient of performance 4, the ratio of maximum temperature to minimum temperature will be
A 3
B 0.25
C 5
D 1.25
Q.No: 48 To produce involute profile of the gear on milling machine, which one is required
A Angle milling cutter
B Slab milling cutter
C Profile milling cutter
D Differential indexing head
Q.No: 49
If the value of is greater than zero, the nature of the thermodynamic cycle is
A Impossible
B Both reversible and irreversible
C Reversible
D Irreversible
Q.No: 50 A cantilever beam of length L is subjected to a uniformely distributed load W per unit length. The maximum bending moment will be equal to
qp.hppsc.hp.gov.in/ViewCandResponse.aspx 8/16
02/03/2021 qp.hppsc.hp.gov.in/ViewCandResponse.aspx
D Three
qp.hppsc.hp.gov.in/ViewCandResponse.aspx 9/16
02/03/2021 qp.hppsc.hp.gov.in/ViewCandResponse.aspx
C Steam engine
D Gas turbine
qp.hppsc.hp.gov.in/ViewCandResponse.aspx 10/16
02/03/2021 qp.hppsc.hp.gov.in/ViewCandResponse.aspx
Q.No: 65 In a oxy-acetylene welding, the ratio of oxygen to acetylene in reducing flame is
A 0.5:1
B 1:1.2
C 1:1.5
D 0.9:1
B Shaft
C Bolt
D Flange
Q.No: 67 The area under the stress-strain diagram up to the rupture point is known as
A Proof resilience
B Modulus of toughness
C Modulus of resilience
D Modulus of elasticity
Q.No: 68 The atmosphere required in the furnace for nitriding the steel component is of
A Ammonia
B Nascent nitrogen
C Graphite
D Liquid nitrogen
Q.No: 71 If ε is the clearance ratio for a reciprocating compressor, the volumetric efficiency will be equal to
qp.hppsc.hp.gov.in/ViewCandResponse.aspx 11/16
02/03/2021 qp.hppsc.hp.gov.in/ViewCandResponse.aspx
Q.No: 72 The relationship between the guage length (L) and the cross sectional area (A) of the test specimen in a tensile testing is given by
Q.No: 74 In an assembly line balancing, 4 tasks with time 15, 18, 13, 21 min are to be assigned on the different workstations for the cycle time 25 min.
theoretical and actual number of workstations required are
A 2 and 3 respectively
B 3 and 4 respectively
C 3 and 5 respectively
D 4 and 5 respectively
Not Answered
C Taiichi Ohno
D Kiichito Toyoda
B 1.2%
C 6.67%
D 4%
B Process layout
C Fixed position layout
qp.hppsc.hp.gov.in/ViewCandResponse.aspx 12/16
02/03/2021 qp.hppsc.hp.gov.in/ViewCandResponse.aspx
D Product layout
D Hartung Governor
Q.No: 81 Which NGO petitioned against unauthorised construction of Hotels including the one by H.P. Tourism Development Corporation ?
A NGT
B INTACH
C SPOKE
D KPA
Q.No: 82 How many reserved Assembly constituencies are there in Kangra District of H.P. ?
A Two
B Three
C Four
D Five
Q.No: 83 Who is the convener of National Compassion Committee for Eradication of Bonded Labour in India ?
A Ira Pande
B Nirmala Deshpande
C Medha Patekar
D Nirmala Gorana
Not Answered
B Hudson
C Tigris
D Seine
Q.No: 85 Which tunnel will provide connectivity between Srinagar, Kargil and Leh in J and K ?
A Zojila tunnel
B Sonamarg tunnel
C Banihal tunnel
D Jawahar tunnel
qp.hppsc.hp.gov.in/ViewCandResponse.aspx 13/16
02/03/2021 qp.hppsc.hp.gov.in/ViewCandResponse.aspx
Q.No: 86 In which country is Kaaba, the inner shrine of mosque at Mecea ?
A Kuwait
B Saudi Arabia
C Dubai
D Iraq
Q.No: 89 Where are the headquarters of the Aga Khan Trust for culture which carried out the renovation of Qutab Shahi Tombs in Hyderabad ?
A London
B Rome
C Paris
D Geneva
Not Answered
Q.No: 90 According to Swachh Sarvekshan 2018 which is the cleanest city in India ?
A Chandigarh
B Pune
C Bhopal
D Indore
C Kinnaur
D Kangra
Q.No: 92 When was the H.P. Territorial Council converted into Legislative Assembly ?
A 1962
B 1961
C 1963
D 1964
B Kinnaur
C Kullu
qp.hppsc.hp.gov.in/ViewCandResponse.aspx 14/16
02/03/2021 qp.hppsc.hp.gov.in/ViewCandResponse.aspx
D Lahaul - Spiti
Q.No: 94 Which mountain pass joins Lahaul and Spiti areas of H.P. ?
A Kugti
B Baralacha
C Padri
D Kunzam
B 23rd May
C 19th May
D 12th May
Q.No: 97 From which Assembly constituency of Karnataka did K. Siddaramaiah contest during the 2018 Assembly Elections?
A Kanakpura
B Badami
C Krishnaraja
D Kollegal
Q.No: 98 Near which town of Shimla District is Sipi Fair celebrated in May ?
A Mashobra
B Rampur
C Chopal
D Rohru
Not Answered
Q.No: 99 Who holds the record of having climbed Mt. Everest 22 times ?
A Appa Sherpa
B Phurba Tashi Sherpa
Q.No: 100 Which country is hosting the fifth Asian Champions Trophy Women Hockey Tournament in May 2018 ?
A South Korea
B Japan
C China
D Malaysia
qp.hppsc.hp.gov.in/ViewCandResponse.aspx 16/16